レックス List of Products and Services

The ProTester TR-75 / TR-150 solves the issues found in conventional anchor testing machines. Its compact and lightweight design makes it easy to carry! The TR-75 can measure up to 75 kN, while the TR-150 can measure up to 150 kN! The backlight can be turned on and off with the power switch, making measurements easy in dark places or at night. The peak hold function retains the maximum value displayed. During peak hold operation, the lamp in the upper right of the button lights up, and it operates on battery power, so it can be used anywhere. For more details, please contact us.

• Testing Equipment and Devices

The portable vibration diagnostic device "Shindo-kun Pro" allows simultaneous multi-point measurement of up to four locations in a single measurement operation. The vibration acceleration signals detected by the vibration sensor are converted into digital data and transferred to a tablet PC. After receiving the data, the internal software of the tablet PC performs signal processing and displays the measurement values and vibration waveforms, etc. For more details, please contact us.

• Vibration Inspection

The TruPulse 360 is a next-generation laser measuring device that can measure "straight distance," "horizontal distance," "vertical distance," "slope angle," "height of the target," and "azimuth" with high precision and simple operation. With simple button operations, it allows for three-dimensional distance measurements. The slope sensor and azimuth compass are always active, enabling instant calculations of not only the "distance" to distant targets but also their "height," "spacing," "elevation difference," and "direction." For more details, please contact us.

• Distance measuring device

The Digital Oil Checker Wendy is an extremely simple lubrication oil diagnostic tool that detects contaminants such as dirt and moisture that cloud the machine's lubricating oil, using a principle based on optical sensors. It allows for diagnosis without the need to extract oil from the on-site oil tank. It can instantly determine oil contamination on the spot, and with a lightweight and compact body weighing only 200g, it is effective for quick measurements in the field. For more details, please contact us.

• Other measurement, recording and measuring instruments

The Grease Ferro Checker is an extremely simple diagnostic tool for equipment that extracts grease used for machine lubrication and detects magnetic substances such as metal wear particles that are mixed in, using the principle of electromagnetic induction. It can also detect damage in low-speed rotating system bearings (iron-based) that are difficult to detect using vibration methods. It is compact and lightweight (130g), making it convenient for portability to the field. For more details, please contact us.

• Other measurement, recording and measuring instruments

The SWT-9300 electromagnetic/eddy current dual-purpose thickness gauge can be connected to a compatible probe for ferrous substrates (electromagnetic), a probe for non-ferrous metal substrates (eddy current), or a dual probe for both ferrous and non-ferrous substrates, depending on the measurement target. Additionally, probes suitable for measuring small pieces and other high-stability probes can be selected based on the application and measurement range. It complies with standards such as JIS K 5600, as well as regulations, internal rules, and standards from government agencies, testing laboratories, research institutes, various corporations, and organizations, as well as international standards like ISO 2808. For more details, please contact us.

• Coating thickness gauge

The USM35X JE is an easy-to-use ultrasonic flaw detector that complies with the basic operational specifications of the Japan Society for Non-Destructive Inspection's "JSNDI Digital Ultrasonic Flaw Detector" and further pursues functionality. Based on the USM35X, new features such as the S-DAC function (Distance Amplitude Characteristic Curve) have been added to better meet a wider range of inspection needs. It is now possible to switch between "Normal Flaw Detection Mode" and "Training Mode," and direct keys have been arranged to switch to frequently used screens during flaw detection, including gain step changes, gate settings, and DAC creation, starting with the "Basic" key that displays the basic screen. For more details, please contact us.

• Flaw detection testing
• Other inspection equipment and devices

The HI-800 is a compact and lightweight concrete mortar moisture meter. For the repair of exterior walls, epoxy resin is injected into damaged concrete (mortar), and measuring the moisture content with this device at that time will help determine the optimal injection timing. By drilling two holes at the desired measurement locations and simply inserting the sensors, moisture measurement is possible. This device is a moisture meter developed based on the "Public-Private Joint Research on Repair and Renovation Techniques for Exterior Materials" by the Ministry of Construction's Building Research Institute. For more details, please contact us.

• Other measurement, recording and measuring instruments

The LED Spectral Radiance Meter MK-350 is easy to operate and has high photometric analysis capabilities, making it suitable for various lighting installations. It also allows output in Excel data and color images (BMP). The selection of LED lighting in the future cannot be explained solely by the illuminance distribution of existing light sources in lighting design; it is becoming increasingly important to design a balanced approach to "color temperature, color rendering, and illuminance" that is specialized for human biological rhythms. By controlling the daily biological rhythms and changes in body temperature through LED lighting technology, it is anticipated that health management and aesthetic effects will also change. The ability to measure the balance of light color, color rendering, and illuminance in the field enhances the value of the "Spectronavi-MK350." For more details, please contact us.

• Other measurement, recording and measuring instruments

The self-recording water pressure measuring device FJN-501A has a function for switching recording times in five stages, allowing for accurate recording of changes in water pressure over time. This device can record water pressure fluctuations continuously from 4 hours to 168 hours, and it has the functionality of five units (Type A) in one device. By ensuring stable water pressure and recording fluctuations, it enables the understanding of appropriate water pressure, identification of water supply issues, necessity for pressure reduction, and detection of leaks, allowing for prompt responses and measures through data collection, leading to more relaxed water pressure management. It can also be utilized as feedback data for direct water supply and pipeline network maintenance and strengthening. For more details, please contact us.

• Other measurement, recording and measuring instruments

The dynamic strain gauge DPM-912B is a dynamic strain measuring instrument that promises high stability and high precision measurements. It allows for easy sensitivity settings by simply configuring the input strain and output voltage values using a digital switch, significantly improving work efficiency. The bar meter features a vertical design for easy visibility, and it is characterized by its ability to cancel out the effects of slow changes such as temperature drift of gauges and sensors through a high-pass filter. For more details, please contact us.

• Other measurement, recording and measuring instruments

The generation of hydrogen sulfide within sewer facilities causes significant damage to each facility due to the corrosion of sewer pipes and unpleasant odors. The diffusion-type hydrogen sulfide detector GHS-8AT features a large display screen for checking concentration, temperature, battery level, and more. It includes a sensor calibration reminder function and utilizes a power and recording switch for energy saving, allowing for the selection of when to start and stop recording. It is compact and lightweight, making it suitable for various installation locations. Please utilize the diffusion-type hydrogen sulfide detector GHS-8AT for unmanned, continuous monitoring of hydrogen sulfide concentration in sewer facilities and for addressing corrosion and odor issues. For more details, please contact us.

• Other measurement, recording and measuring instruments

The high-performance infrared thermometer testo 835-H1 not only measures surface temperatures but also allows for the measurement of gas temperature and humidity. It is ideal for the maintenance of plant equipment and the management of temperature and humidity in buildings and homes. It reliably captures the measurement range even from a distance. The 4-point laser makes the measurement range clear, and the temperature inside the laser point is measured. The joystick is linked to an icon menu, allowing for intuitive one-handed operation. For more details, please contact us.

• Radiation thermometer

The XOS-326 is a sensor-separation type concentration meter that simultaneously measures oxygen and hydrogen sulfide. The sensor effectively captures gas even from a distance. The gas concentration is clearly displayed at hand. In underground sites such as manholes, gas can be measured by inserting the sensor part from above ground. Additionally, leveraging the advantages of the separation type, it is active in various sites for pre-safety checks and ensuring the safety of workers. For more details, please contact us.

• Other measurement, recording and measuring instruments

The semiconductor material gas detector/ozone gas detector XPS-7 features a logger function that allows for data management on a PC. It is a compact and lightweight model weighing only 1.3 kg. It can be used for two-handed operations with a shoulder strap. As the gas concentration changes, the speed of the alarm sound (intermittent sound) gradually changes, and when it reaches a high concentration, it alerts with a continuous sound, making it easier to identify the location of gas leaks. For more details, please contact us.

• Other measurement, recording and measuring instruments

The Proformer 5 Scanlog is a groundbreaking non-destructive rebar detector that uses a unique measurement principle. The Scanlog comes with a scanner and is capable of displaying the rebar condition using the cyber scan method. It can explore and measure the "position of rebar," "cover thickness," and "rebar diameter" within concrete structures. The Proformer 5 offers excellent operability and can perform high-precision exploration and measurement. For more details, please contact us.

• Other inspection equipment and devices

The X-Scan PS 1000 is a non-destructive buried object detection system that uses electromagnetic wave radar to locate rebar, PC steel wire, PVC pipes, cables, and more. The exploration data is displayed in 2D and 3D. Without the need for special analysis work, it allows for quick identification of buried objects within 300mm depth in concrete on-site. NETIS registration number: CB-110039-A. For more details, please contact us.

• Other inspection equipment and devices

The proliferation of power electronics applications, the increase in large equipment, and the rise of distributed power sources have led to an increase in power supply troubles due to the complexity of power systems. The quickest way to address these issues is through rapid and accurate situation assessment, and the PW3198 strongly supports customers in resolving their power supply troubles. The PW3198 can measure voltage on its own. An optional clamp-on sensor is required for current and power measurements. For more details, please contact us.

• Other electronic measuring instruments

The color camera device is an inexpensive borehole television that allows for the observation and inspection of the interiors of boreholes, wells, and pipes. By using this device, you can visually inspect and confirm the inside of the borehole, enabling highly reliable measurements. It is compact, lightweight, and very easy to handle, using four AA batteries, so no external power supply is required. For more details, please contact us.

• Other measurement, recording and measuring instruments

The IPLEX TX video scope with a bending mechanism, measuring φ2.4mm, can approach narrow gaps that were previously unreachable and vividly display the internal conditions of the inspected object. This ultra-thin video scope demonstrates significant power in the inspection processes of cast parts, molds, and various ultra-fine tubes. It enables observation of areas that were difficult to reach with conventional video scopes, greatly expanding inspection possibilities and contributing to improved inspection quality. For more details, please contact us.

• Industrial Endoscope

The GPS-compatible precision acoustic depth sounder TDM-B II -F has improved performance in the recording section with features such as gradation display, step-type paper feed speed, and additional scales, making it more user-friendly. Additionally, its synchronization with GPS surveying instruments has been enhanced, making it suitable for GPS depth and shallow surveys. There are no fluctuations in recording due to inertial effects, and synchronization errors do not occur. It can print time, water depth values, range, sound speed correction values, scales, and more. It has a compact design weighing only 7 kg. For more details, please contact us.

• Other measurement, recording and measuring instruments

The Magnetic Locator GA-1 detects unknown magnetized metal objects buried in the ground, embankments, snow, and underwater. It is effective for vertically buried objects as it has sensors built in to move up and down. Since it responds to the magnetism of metal objects, it is suitable for deep exploration and can detect the size and length of metal objects by determining their polarity. Although it is influenced by the degree of magnetism, it can detect deep objects under favorable conditions. For more details, please contact us.

• Other measurement, recording and measuring instruments

The temperature, relative humidity, and atmospheric pressure display unit HD2001.1TV1 can also measure and display wind speed via RS232C or RS485 serial communication for all models. All models are equipped with RS232C or RS485 serial output, allowing for network management of multiple units. Additionally, all models feature alarm outputs with open collector that can be set for upper and lower limits. Output selection can be easily performed by switching dip switches and jumpers on the internal circuit board. The common large dual-line display LCD shows one of the elements of these environmental monitors on the upper line, while the lower line continuously displays temperature changes. For more details, please contact us.

• Thermo-hygrometer

The PR-11BE parking lot reflector sensor is a near-infrared beam interruption type (reflective) sensor. It can detect the entry and exit of people and vehicles at entrances and exits of apartments, factories, and buildings. By linking with controllers and other devices, it can issue warnings through sound or lights and automatically report when the sensor is triggered. It can be used with single-side wiring, making it suitable for locations where double-side wiring is difficult. Since the light-emitting and light-receiving parts are integrated into a reflective sensor, wiring work only involves the sensor body. Additionally, maintenance is not cumbersome. For more details, please contact us.

• Sensors

The RINKO W wiper-type memory DO meter is a DO meter capable of measuring DO and water temperature, using a miniSD card recording method for long-term continuous observation. It is equipped with a wiper mechanism to clean dirt attached to the optical DO sensor. Compared to conventional galvanic electrode types, it does not require frequent replacement of the electrolyte or membrane, and the adoption of a stable oxygen detection membrane allows for longer calibration intervals. For more details, please contact us.

• Other measurement, recording and measuring instruments

The CS-200 color luminance meter has achieved high-precision measurement of luminance, chromaticity, and correlated color temperature for various displays, LEDs, and lamps by adopting a newly developed spectral fitting method. It is compact, lightweight, and battery-operated, covering measurements from low to high luminance with just one device. The measurement angles (1°, 0.2°, 0.1°) can be switched, allowing for easy adjustment to match the size of the measurement area while checking the measurement object. For more details, please contact us.

• Other measurement, recording and measuring instruments

The WA 1 is a portable water quality meter capable of measuring four parameters: turbidity, color, residual chlorine, and transparency. It can simultaneously measure turbidity and color in accordance with the "Water Supply Act" and "Drinking Water Testing Methods." The main unit features a control panel, LCD display, and built-in printer, and is lightweight and compact, making it easy to carry for both indoor and outdoor measurements. Additionally, operation is extremely simple—just fill the dedicated cell with the sample water and press a button. It is an ideal measuring instrument for evaluating water quality in drinking water, industrial water, rivers, reservoirs, pool water, and wastewater. For more details, please contact us.

• Water quality testing

The GX-8000 TYPE B is a portable gas monitor that can detect and simultaneously display four components: flammable gases (LEL), O2, H2S, and CO. It is ideal for preventing explosions, oxygen deficiency, and poisoning accidents at various work sites. It is compact, lightweight, and easy to carry, with hydrogen explosion-proof compliance: Exia II CT4X, and it has a protection rating equivalent to IP67, ensuring safety even in harsh environments. For more details, please contact us.

• Other measurement, recording and measuring instruments

The DPI610PC is a portable pressure calibrator that features the ability to simultaneously measure switch contact resistance during pressure switch testing. It covers all the functions required in the field, including pressure generation, pressure fine-tuning, power supply to the device under calibration, output measurement, 4-20mA loop testing, data logging, and leak testing, all in one unit. For more details, please contact us.

• Testing Equipment and Devices

The portable insulation monitoring device, Leakage Watcher, detects the current I0 identified by the zero-phase current transformer and any voltage in the circuit (ground voltage), and it also detects the current I0r flowing due to insulation resistance. It allows for leakage monitoring while the circuit is live and is equipped with features for continuous recording and holding instantaneous maximum values. With a touch panel, it enables easy real-time monitoring of the situation through graphs on-site. Its structure allows for easy installation and removal, making relocation (changing measurement locations) simple and safe. For more details, please contact us.

• Other measurement, recording and measuring instruments

The portable hydraulic pressure calibrator DPI610HC is the standard portable pressure calibrator equipped with the capability to simultaneously measure switch contact resistance during pressure switch testing. It covers all the functions required in the field, including pressure generation, pressure fine-tuning, power supply to the device under calibration, output measurement, 4-20mA loop testing, data logging, and leak testing, all in one unit. For more details, please contact us.

• Other inspection equipment and devices

The micro CA-300 is a digital inspection camera that can be used not only for inspecting narrow spaces such as factory piping, air conditioning ducts, behind factory equipment, factory machinery, and automobile engine compartments, but also for investigating debris in disaster rescue situations and as a monitor and recording device for pipe inspection cameras. It excels in visibility, operability, convenience, expandability, and portability, making it ideal for narrow space inspections. It can also be used as a monitor for pipe inspection cameras! Please make use of it in various locations. For more details, please contact us.

• Other inspection equipment and devices

The Leica 3D Disto is a laser distance meter operated with a handheld controller and remote controller. It allows for measurements in large spaces, special shapes, sloped walls, areas with fine decorations, and hard-to-reach places. The body is designed to be sturdy and slip-resistant, allowing it to be placed directly on the floor or mounted on a tripod for use. By measuring distance and angles, it enables accurate location information of measurement points, as well as photographing the measured objects and automatic scanning. For more details, please contact us.

• Distance measuring device

The DPI610LP is a portable pressure calibrator equipped with high-precision micro-pressure sensors and a built-in micro-pressure generation function with 0.01 Pa increments, designed for calibrating differential pressure transmitters (DP cells) with Hi/Lo pressure ports. It can simultaneously measure SW contact resistance during pressure switch testing, and covers all the functions required on-site, including pressure generation, fine pressure adjustment, power supply and output measurement for the device under calibration, 4-20mA loop testing, data logging, and leak testing, all in one unit. For more details, please contact us.

• Other inspection equipment and devices

The portable ultrasonic gas flow meter PT878GC-01 can measure the flow of almost any gas in the industrial sector, from compressed air to ultra-pure gases. Its ultrasonic characteristics provide high accuracy with zero pressure loss, and its wide rangeability makes it applicable in various fields, such as energy-saving diagnostics. Since it operates without contact with the gas and has no moving or wearing parts, and theoretically has no drift in measurement values, it is extremely effective for measuring gases that are sensitive to contamination or corrosive gases, as well as for reducing running costs. For more details, please contact us.

• Flow Meter

MONMOS NET1AX is a three-dimensional measurement system that has added features to automate the initial data acquisition process and enable high-speed automatic measurement. Additionally, it has improved performance through the latest technology, including high-precision automatic alignment with prisms and sheets, long-distance non-prism measurement (NET1AX), and enhanced motor rotation speed. For more details, please contact us.

• 3D measuring device

The NV-100 is a point gas detector that detects gases in tunnels and underground construction, alerting workers to safety hazards with alarms. Zero adjustment and span adjustment can be performed with a single touch, and the zero suppression function allows for the cancellation of slight fluctuations in readings due to environmental changes. It is available for methane (NV-100C), hydrogen sulfide (NV-100H), carbon monoxide (NV-100D), and oxygen (NV-100S). The gas sampling method for the detection unit is diffusion type. (KD-5B/KD-5D/KD-5O) For more details, please contact us.

• Other measurement, recording and measuring instruments
• Other safety and hygiene products

The DIK-311E is a soil moisture meter that allows for easy measurement of soil volumetric water content in just a few seconds by simply inserting the theta probe (sensor) into the soil. The sensor measures by detecting changes in dielectric constant and is waterproof, allowing it to be directly buried in the ground. It can measure volumetric water content from 0 to 100% with an accuracy of 5%, and with calibration, it can achieve an accuracy of 2%. For more details, please contact us.

• Other measurement, recording and measuring instruments

The debris flow warning system OT-1407 detects debris flows and abnormal water levels using wire sensors and alerts downstream areas through sirens to prevent disasters. The warning device is powered by solar energy, making it usable in locations without power, such as mountainous areas and riverbanks. For more details, please contact us.

• Other measurement, recording and measuring instruments

The TGS-146B is a GM survey meter for β (γ) rays that displays count rates on both an analog meter and a digital display, while cumulative counts can be shown digitally. It uses a large-area end-window organic GM tube as the detector, allowing for efficient measurements. The adoption of a large analog meter and digital display enables the reading of subtle changes in count rates and detailed data. The measurement range is displayed within the meter, reducing the need for eye movement. Additionally, it is equipped with a variety of features, including alarm functions, cumulative counting functions, and memory functions. For more details, please contact us.

• Other measurement, recording and measuring instruments

The LED stroboscope testo 477 is a device that continuously emits light that flashes at regular intervals from several times to several thousand times per second, and it is used to observe the movement and state of objects in rotational or repetitive motion by utilizing the afterimage effect of the human eye. Since it allows for checks while the object is in motion, it can be used to confirm whether there are any color misalignments in printing machines or inconsistencies in thread feeding in weaving machines, as well as to check for any abnormalities in gear meshing. It is convenient for checking the movements of machines installed in hard-to-reach places or small rotating bodies. For more details, please contact us.

• Other inspection equipment and devices

The NL-62 precision sound level meter comes standard with an auto store function and allows for continuous measurement using a timer function or external power supply. It emphasizes ease of use by eliminating the hassle of having to check the manual during measurements. The screen is a large, easy-to-read 3-inch color LCD, and it has added waterproof performance to withstand sudden rain. The Rion NL-62 precision sound level meter maximally supports your measurements. For more details, please contact us.

• Noise Inspection

The dial-type variable resistor 278610 is a variable resistor that provides accurate and stable resistance values in the measurement range of ±0.05 to ±2% in DC and low-frequency bands. It has a small temperature coefficient, minimal aging change, and low residual resistance. It can be used in DC and low-frequency bands and is rack-mountable. For more details, please contact us.

• Resistors

The MT-10(265303) is a mini manometer that achieves compactness, lightweight design, and high reliability. It uses a silicon resonant sensor that has won the Okouchi Memorial Prize and the Keidanren Chairman's Award for pressure measurement. The detection part employs single crystal silicon, which offers superior reproducibility compared to conventional metal sensors and allows for stable measurements due to minimal aging changes. For more details, please contact us.

• Testing Equipment and Devices

The 401B heat stroke prevention display panel directly shows the current WBGT (Wet Bulb Globe Temperature) for heat stroke prevention guidelines, making the real-time risk of heat stroke and preventive measures clear at a glance. It frees you from the hassle of measurement and display. The prevention guidelines can be selected from three types based on usage: "for sports," "for labor," and "for daily life." (Changes to the expression of risk are also possible.) It does not require wiring installation due to wireless communication, allowing for flexible placement. For more details, please contact us.

• Other safety and hygiene products