光洋産業 List of Products and Services

We have launched a "walk-through type RFID tunnel gate" that is low-cost and eliminates 100% of misreads caused by radio wave leakage. By installing shield curtains at the tunnel entrances, we have developed a tunnel gate that allows for bulk inspections without misreads, even with maximum power radio waves, at a low price. Customization for various sizes and specifications is also available. 【Features】 ■ "Wide opening" that allows hangers, carts, and trolleys to pass through as they are ■ "Electromagnetic shield curtains" to prevent radio wave leakage from the entrance ■ Installation of "transparent panels with electromagnetic shielding" on the ceiling and sides to visualize the inside of the gate ■ "Maximum size" can be adjusted to fit the site ■ "Radio wave absorbers" to prevent radio wave reflection ■ "Equipped with casters" for mobility ■ "On-site shield performance measurement" is also possible *For more details, please contact us or view the PDF materials available for download in the catalog.

• EMC countermeasure products

KR-162PWL (With substrate: special non-woven fabric) KR-036PWL (With substrate: special non-woven fabric) KR-523PWL (With substrate: special non-woven fabric) KR-735PWL (With substrate: special non-woven fabric) KR-780PWL (With substrate: special non-woven fabric) KR-185NW (Without substrate)

• Adhesive tape

We have launched a "flame-retardant electromagnetic wave shielding membrane material" that demonstrates electromagnetic wave shielding performance even in outdoor environments and can also be used as tent material. We have developed a flame-retardant shielding membrane material that has electromagnetic wave shielding performance in outdoor environments and can independently construct structures such as tents. It can be used in a wide range of fields, including logistics and defense. 【Features】 - Electromagnetic wave shielding membrane material that is "flame-retardant" and "can be used independently outdoors" - Can be processed similarly to general tent materials - Electromagnetic wave shielding performance remains unchanged even when exposed to wind and rain - Can be used for construction purposes due to its flame-retardant properties. - Intended uses: - Radio wave shielding for factories, warehouses, and logistics hubs using RFID - Shield tents for operational command in the defense sector, shield covers for electronic equipment protection - Concert tents, circus tents, and expo pavilions that use wireless radio and wireless microphones inside - Drone training grounds where interference from radio waves needs to be eliminated *For more details, please contact us or view the PDF materials available for download in the catalog.

• Composite Materials

This document explains "spatial design" for the stress-free operation of RFID (electronic tags). It covers issues such as misreading and interference, spatial design using electromagnetic shielding materials, and information about electromagnetic shielding materials. Koyo Industries will consistently handle everything from material development and shielding design proposals to delivery and subsequent maintenance. We encourage you to read it and make use of it. [Contents] ■ Issues of misreading and interference ■ Spatial design using electromagnetic shielding materials ■ Introduction to electromagnetic shielding materials ■ Case studies in the apparel industry ■ Shielding spatial design for RFID system adoption in the convenience store industry ■ Purpose of the proposal and our strengths *For more details, please refer to the PDF document or feel free to contact us.

• IC tag

This document introduces examples of the use of "non-combustible SS aluminum sheets." It includes examples of interference prevention for electronic tag reading, construction photos, electromagnetic wave shielding for EEG rooms, EMG rooms, and hearing test rooms, SS sheet construction examples, and measures against radio wave interference in server rooms and VIP conference rooms. Additionally, it also introduces fire compartment wiring penetration treatment and moisture-proof airtight sheets for fire compartments. 【Contents (partial)】 ■ Examples: Interference prevention for electronic tag reading ■ Construction photos: Apparel, specialty stores ■ Electromagnetic wave shielding: EEG rooms, EMG rooms, hearing test rooms ■ SS sheet construction examples: EEG rooms, EMG rooms, hearing test rooms ■ Radio wave interference measures: Server rooms, VIP conference rooms *For more details, please refer to the PDF document or feel free to contact us.

• IC tag

● Before the measures were implemented, the electronic tags (RFID) on the apparel store side were being read by the reader on the back-end side, causing disruptions in operations. However, by spatially separating them with a non-combustible aluminum shield sheet partition (constructed on the back-end wall to prevent multipath interference, with ceiling installation examples depending on the environment), we reduced the impact of mutual interference and resolved the issue, and we are currently expanding renovations to all stores. ● By utilizing RFID and electronic shelf labels together, we can automate necessary parts, allowing us to allocate limited personnel to areas where human involvement enhances corporate value and the significance of the store, thus achieving true labor reduction. Recently, due to the pressure on radio waves leading to frequency shifts and reconfigurations, as well as an increase in RFID users and other wireless devices, cases of acquired radio interference and other obstacles have been observed. However, considering the characteristics of RFID, what is expected is not just labor reduction. ● The non-combustible certified aluminum electromagnetic wave shielding sheet used has obtained F☆☆☆☆ certification and fireproof certification (non-combustible: NM-1776). Its high shielding performance and durability make it user-friendly, and because it can be relatively easily installed in general interior construction, it is expanding its range of applications in various uses where specialized skills were previously required.

• aluminum

- It is a transparent and permeable electromagnetic wave absorber that can create peaks at specific frequencies due to the surface pattern. - In cases where multiple readers are used to read electronic tags, such as in RFID-tagged cardboard forklift operations, placing an absorber partition on the gate side absorbs and shields interference waves from adjacent lanes, enabling normal tag reading and improving errors caused by miscounts. - The partition can be moved as needed, allowing effective zoning of proximity areas and reducing the distance of work movement, leading to labor savings. - Specifications for the transparent electromagnetic wave absorption panel for UHF-RFID in the 920 MHz band: Size: H2,000 x W1,000 x t5.0; Weight: 18.5 kg.

• Other polymer materials

Electromagnetic Wave Shielding Film *Wi-Fi Environment Improvement Measures *Wireless Radio Environment Improvement Measures ● By improving the radio wave environment in windows and indoors, it is possible to bring 5G traffic indoors without causing interference with Wi-Fi 6. Additionally, when applying for a local 5G license, interference adjustments between adjacent local 5G base stations and devices are required based on the radio law-related examination standards. The only solution for the weakest point, window glass, is the electromagnetic wave shielding window film. ● With a visible light transmittance of 70%, it exhibits high transparency while demonstrating excellent heat shielding properties. ● It provides a shielding effect of 25-30 dB, with high transparency and excellent electromagnetic wave (electric field wave) shielding effectiveness, helping to block harmful waves and reduce interference from Wi-Fi 6, 5G, local 5G, etc., thus aiding in countermeasures against speed reduction, delays, and leaks. ● It reflects over 90% of infrared rays (solar heat) contained in sunlight, cuts 99% of ultraviolet rays (UV), and has a high light selectivity with a light efficiency of 1.4 (for 73FG), ensuring low reflection below that of glass without compromising appearance.

• IC tag

- Measures against Wi-Fi signal interference and wireless radio signal interference are supported. - Can be used as a countermeasure against RFID tag interference. - UHF band IC tags are being widely adopted, especially in logistics applications, due to their convenience of being able to read a large number of IC tags over a wide area. However, because their communication range is several meters long, they often read IC tags that are not intended to be recognized. - To prevent misreads, shield curtains, shield roll screens, and shield Roman shades are optimal. - Shield roll screens are a roll screen type that can be retracted and stored when not needed, allowing for accurate reading of IC tags without obstructing the flow of objects or people.

• others

The cause of the issues in the Wi-Fi environment may be the neighboring Wi-Fi signals entering through the window. By properly shielding unnecessary signals with window glass, you can comfortably improve the unstable wireless LAN indoors.

• EMC countermeasure products

【SS Sheet: Fireproof Material Certification Number (Non-combustible: NM-1776) F☆☆☆☆ Certification】 ● Reduction of RFID and WiFi signal interference ● Aluminum sheet reinforced with glass cloth ● Both sides are aluminum, providing unprecedented strength, making it less prone to holes or cracks from bending during installation, and excellent in workability. In case of emergencies, the joints and holes can be reinforced with conductive aluminum tape of the same material, enhancing the shielding performance. 【SS Tape】 ● Reinforcement of gaps between shielding materials, repair of holes, reinforcement of metal connections, and around openings (for shielding joints, shielding construction repairs, and joining metal to metal)

• IC tag
• fiber
• aluminum

- The aluminum tape reinforced with glass cloth uses a high conductivity metal foil as the adhesive surface, providing excellent flexibility, conductivity, and thermal conductivity. - Since it uses a conductive adhesive, it can achieve conductivity in the vertical (thickness) direction just by sticking it on. Being in tape form allows it to be wrapped around cables, devices, and irregular surfaces for use. - By shielding the cables and connectors of electronic devices, it protects them from static electricity and electromagnetic wave interference, enabling measures against electromagnetic wave and radio wave disturbances, as well as static electricity removal. - When installing a freeze prevention device directly onto a resin pipe, aluminum tape treatment on the piping is necessary (wrap this product fully around the piping and ground the aluminum). [Piping treated with aluminum tape can be installed using the same construction data as steel pipes.] - It is used at joints and holes during shielding installation, and the reinforcement improves workability and enhances shielding performance. - It can be used for through-cable treatment.

• aluminum

● It excels in electromagnetic wave shielding (reflection, absorption, blocking, and shielding), and since it is a conductive fabric fiber, there is no generation of static electricity, allowing the entire fabric to be grounded. ● Weight reduction: Compared to shielding measures using metal, it is lighter and has better handling properties. Ventilation holes: High breathability is achieved using conductive fabric, allowing for shielding at the hole areas. ● The fabric is made from aramid fibers that are coated with copper and nickel plating, providing high conductivity, bend resistance, and flexibility. Additionally, aramid fibers are high-performance fibers that possess heat resistance and flame retardancy, and are used in applications such as firefighting suits. ● A three-layer structure of PET yarn plated with Ni (nickel) + Cu (copper) + Ni (nickel) exhibits excellent shielding properties.

• fiber

Frequency-selective electromagnetic wave absorbing glass Frequency-selective electromagnetic wave absorbing panel (resin type) All custom-made Maximum size: 1,200mm × 2,400mm Manufacturable in both glass and resin types Can be used indoors and outdoors when made of glass

• others
• EMC countermeasure products
• Machinery and equipment installation/dismantling/relocation

All made to order Maximum size up to 1,200mm × 3,600mm Can be made from either glass or resin Usable for both interior and exterior applications High transparency High shielding properties

• Semiconductor inspection/test equipment
• Other physicochemical equipment
• others

We offer a one-stop solution for the development of electromagnetic wave shielding materials at our in-house research institute, manufacturing at our own factory, measuring materials and methods in our in-house research facility's "anechoic chamber," design, electromagnetic wave shielding construction, and electromagnetic wave measurement (upon handover).

• IC tag
• Magnetic field analysis/electromagnetic wave analysis
• Other security

● The aluminum sheet, reinforced with glass fiber and double-sided aluminum foil, eliminates the need for construction with copper mesh and copper foil, which are susceptible to corrosion. It exhibits unprecedented strength, making it less likely to develop holes during installation or cracks due to bending, unlike conventional products. The joints and holes are reinforced with SS tape of the same material, enhancing workability and providing excellent shielding performance. ● The shielding performance has been proven by numerous electromagnetic wave shielding construction achievements. ● As a durable and easy-to-install shielding material that replaces the difficult-to-handle copper foil in EEG, EMG, and hearing test rooms, the moisture-resistant aluminum sheet shield is easy to maintain, durable, requires no special skills, and is relatively easy to install in interior construction, making it ideal for new builds, renovations, and maintenance work.

• aluminum

KOYO MS Sheet (Magnetic Shield) is a material particularly suitable for shielding low-frequency alternating magnetic fields. It has minimal degradation of magnetic shielding performance due to processing such as bending, punching, and cutting, making it easy to process into curved surfaces and various shapes. Furthermore, by combining it with other materials, it is possible to further enhance the properties of the MS sheet. It is lightweight (amorphous metal + front and back PET film) and has good workability (with minimal degradation of magnetic shielding performance during processing such as bending, punching, and cutting, and easy processing into curved surfaces and various shapes). This significantly reduces the risk of surrounding damage and adhesion accidents during the transportation of materials in high magnetic field environments, especially during equipment replacement and renovation, allowing for safe construction. 【Features of Magnetic Shielding Sheet】 ● No magnetic directionality ● Lightweight and easy to handle ● Large size available (900×1800) ● On-site processing possible (bendable) ● Punching processing is possible

• Non-ferrous metals
• Other services
• Other metal materials

Electromagnetic wave shield doors for offices, stainless steel single-leaf doors, large steel sliding doors, and large anechoic chamber doors are electromagnetic wave shield doors tailored to needs and requests. Designs can be customized according to frequency and required performance. Doors with shielded glass are also available.

• Steel
• stainless

● This is a non-combustible material with a fiberglass core and aluminum foil attached to both sides. ● A tape of the same material (such as SS tape) is used at the seams to maintain adhesion. Heat insulation measures for buildings in summer are key. ● In summer, roofs heat up due to solar electromagnetic waves, rising to around 55°C to 70°C. By covering them with SS sheets, radiant heat is reflected, protecting the building from radiant heat that insulation cannot guard against, creating a comfortable space that is less affected by outside temperatures. ● By covering with this product, radiant heat is reflected, protecting the building from radiant heat that insulation cannot guard against, creating a comfortable space that is less affected by outside temperatures. ● The fiberglass reinforced core with double-sided aluminum sheets demonstrates durability, making it less likely to crack from bending and improving workability on site. It also has waterproof performance, achieving moisture-proofing, heat insulation, and airtightness with a single layer of sheet even in fire compartments. ● According to alkali exposure tests conducted at our research institute, when applying this product directly to hardened concrete, no alkali corrosion is observed if primers, adhesives, etc., are used.

• aluminum

1) "Wireless LAN Access Point Storage Box" - Controls the direction of radio wave emission to prevent interference, and prevents interference caused by reflections on metal floor surfaces within the ceiling, making it essential for ceiling-mounted access points. - Allows for easy adjustment and relocation of the AP position after installation. - Thickness can be adjusted according to the frequency band used, enabling optimal radio wave absorption. 2) "Heat-Reflective Transparent Electromagnetic Wave Shield Window Film" - Reflects over 90% of infrared rays (solar heat) contained in sunlight and cuts 99% of ultraviolet (UV) rays. - Offers a high light selectivity with a light efficiency of 1.4 (for 73FG), which is unmatched by other companies, demonstrating high heat-reflective properties while remaining transparent. It is a high-performance mirror type that can reflect infrared rays, with a visible light reflectance of less than 10%, preserving appearance, and provides an electromagnetic wave (electric field wave) shielding effect of 25-30 dB. - When used in combination with the adjustment of the installation position of the "Wireless LAN Access Point Storage Box," high attenuation effects are observed in cases of exterior walls: metal curtain walls / structural floors: metal deck plates, etc. 3) In cases where the exterior wall is RC (reinforced concrete) and ALC (autoclaved lightweight concrete), there is no shielding performance, so a composite measure involving the installation of non-combustible aluminum sheets will be implemented.

• Composite Materials
• Wireless LAN
• aluminum

- It is capable of wideband radio wave absorption from 300 MHz to 110 GHz and excels in radio wave absorption performance for oblique incidence. It is easy to cut and process, making installation at the site straightforward. - It is an electromagnetic wave control material and radio wave absorber effective for wireless technology, EMC, and noise countermeasures. - Made primarily from polyolefin-based resin and carbon, it can be produced in suitable thicknesses depending on the applicable frequency. - Wireless LAN access points stored in the ceiling can cause interference due to reflected waves from the deck plate within the ceiling, so the radio wave absorption box cuts off upward radio waves, enhances the directionality of downward waves, and absorbs excess radio waves. - Installing it on adjacent partition walls in the same floor tenant prevents radio wave interference and secures channels. - Near glass windows, it prevents radio wave leakage to the outside and, when used in conjunction with shielding films and floor SS sheets, reduces radio wave interference between floors and inside and outside. - The box for wireless LAN access points, when combined with SS sheets, prevents radio wave interference. - It is used as an electromagnetic wave control material for adjusting wireless LAN access point equipment during system installation (used to isolate and adjust several units at hand).

• others

● This gasket made with conductive fibers can be used at the contact points of simple shielded fixtures. ● It is a gasket made with flexible, elastic, and highly conductive silver-coated fibers. ● It comes with conductive adhesive copper foil tape on the back, serving as a shield gasket for contact points between metals.

• fiber
• others

It has excellent shielding performance and is suitable for repairing electromagnetic wave leakage for indoor use. It demonstrates superior adhesion to various materials such as metal, glass, and wood, as well as reinforcing corners, overlaps, and joints of shielding sheets, sealing joints of shielding doors and shielding glass, and caulking of sash frames.

• glue

■Necessary for building software and hardware for wireless and radio technology ● Our own site is not available... ● There is a site, but no testing facilities... ● There are no engineers available to handle it... ● We cannot find time for testing... ● At our company, you can utilize our services in a rich natural environment. ● If it is a transportable product, we will accept measurements at our site. ● Due to cost, we have no choice but to reduce the number of measurements... ● We do not want to slow down the development speed... 　※ Please consult with us first. 【Overview】 'EMC 3m Method Anechoic Chamber' Measurement ● Compliant with Japan Architectural Institute Environmental Standards (AIJES-E0003-2017) ● Measurement of interference wave electric field strength ● Measurement of conducted interference waves at power ports (noise terminal voltage measurement) / Measurement of conducted interference waves at communication ports ● Measurement of interference power 'EMC Shielding Performance Measurement' Measurement Targets ● Full-scale shielding performance measurement with large openings (doors, windows, etc.) ● Shielding performance measurement of various materials (up to 2400mm x 2400mm)

• Other contract services

● We offer on-site measurement and testing services for electromagnetic wave environments to resolve the issues you inquired about. ● From the pre-meeting of the planning stage, we provide a one-stop solution that includes on-site measurements, consulting based on the results, and subsequent electromagnetic wave countermeasures and shielding construction. ● We will also propose more cost-effective and efficient materials and construction methods.

• Other contract services
• Contract measurement
• Prototype Services

We measure the electromagnetic environment of buildings such as companies, factories, and hospitals, which may be concerned about equipment malfunction or health hazards to humans due to electromagnetic wave interference. We also offer measurements of the shielding effectiveness at installation sites for MRI and CT machines, as well as surrounding electromagnetic environments. 1) Magnetic Field Measurement When it is necessary to know the magnetic field environment in advance, such as for the installation of devices that are susceptible to magnetic field influences, please make use of our environmental measurement services. 2) Examples of On-Site Measurements - Installation sites for electron microscopes - Installation sites for semiconductor manufacturing equipment - Installation sites for hospital equipment and testing devices - Near power transmission lines - Near transformers - In areas around apartment buildings or residential construction sites where there are nearby power transmission lines or substation facilities 3) Classification of Environmental Magnetic Fields - DC Magnetic Fields Magnetic fields leaking from permanent magnet application devices (such as speakers), magnetic fields generated by DC large currents from lightning or welding machines, strong electromagnets (such as lifting magnets), and geomagnetic fields. - AC Magnetic Fields Magnetic fields from power transmission lines and substation distribution equipment at commercial frequencies. - Fluctuating Magnetic Fields Transient magnetic field changes caused by the passage of trains or vehicles, disturbances in magnetic fields due to the operation or shutdown of electrical equipment and devices.

• Other contract services
• Contract measurement

- The adoption of "SUS double mesh" at the intake ports for "light" and "air" has eliminated the need to install air conditioning and lighting fixtures indoors. - This is a prefabricated panel-type shield room that has a short on-site construction period and allows for easy relocation and modification. - By using SUS double mesh for the daylight windows and ceiling openings, we have eliminated the durability and clogging issues that were drawbacks of previous mesh shield rooms, making lighting fixtures, ventilation equipment, and fire alarm systems unnecessary. - Unlike traditional enclosed spaces, this design allows for visibility both inside and outside, creating a sense of openness without feeling oppressive. It is lightweight and easy to construct, and in office spaces within tenant buildings, there is no need for construction on the building side. Layout changes after installation can be easily managed without the need for dismantling, relocation, or reassembly, and there is no requirement for restoration to the original state upon departure. - The design is tailored to the intended use and specifications, and due to the panel system, construction and adjustments in dimensions can be easily carried out.

• stainless
• others
• EMC Testing

The pipe frame structure (which does not require screws or pipe joints by the driver) allows for easy assembly and disassembly, is lightweight, compact, portable, does not occupy installation space, and is space-saving for storage, making it a simple shield room that can be set up anywhere. The shield layer (shield tent fabric) is double-layered, enabling high-performance shielding, and the floor is made of galvanized steel plates, which can be replaced only if damaged, without affecting the tent's shielding performance.

• Other environmental equipment
• fiber
• Wireless LAN

In recent years, there has been an increase in electronic devices and radar emitters that emit high-frequency waves, and correspondingly, EMC and EMS measures have become essential. The "high-frequency electromagnetic wave absorption sheet" absorbs electromagnetic waves in the gigahertz range of 5 to 110 GHz. It can be customized in terms of materials, mixing ratios, and film thickness for the electromagnetic wave absorption layer and metal reflection layer to match the frequencies emitted by electronic devices. As the speed of CPUs and other components increases, the noise frequency range is shifting to high frequencies, making it difficult for conventional ferrites and filters to prevent interference with signal waveforms, complicating noise countermeasures. This product excels in radio wave absorption performance at oblique angles, is easy to process and install due to its thin sheet form, and is highly durable. It is suitable for countermeasures against module TX-RX crosstalk (ETC at 5.8 GHz, X band at 8-12 GHz, ship radar at 3 GHz and 9 GHz, proximity radar at 24 GHz, local 5G at 28 GHz, high-speed wireless LAN at 60 GHz, vehicle-to-vehicle radar at 76.5 GHz, and millimeter-wave noise countermeasures from 50 GHz to 110 GHz), ground plate crosstalk measures, unwanted radiation noise absorption, communication facility sites, countermeasures against ETC misoperation due to diffuse reflection, and ghosting caused by nearby metallic structures in radar applications.

• others

● The NFC/RFID system, which is a global standard, is being adopted in transportation-related contactless IC cards and electronic money, expanding convenience. ● From card form factors to system-compatible mobile phones and smart devices, small mobile electronic devices are equipped with reader/writer (R/W) functions, enabling the active use of inexpensive NFC tags. ● As a result, everything and everywhere can connect to internet services, allowing even white goods and healthcare devices without network connectivity to connect to the internet through smartphones and start collaborating with various cloud services. ● The biggest advantage is that the system can be built without placing a special burden on stores or users. ● On the other hand, when incorporating into small mobile electronic devices, it is inevitably necessary to be close to metals such as printed circuit boards, so a method is employed that has a magnetic shielding effect between the metal surface substrate and the tag antenna, while also placing low-loss soft magnetic materials. ● This allows the incident magnetic flux to pass through the layer of high permeability material and return from the end face, enabling communication even when an RF tag is attached to a metal surface.

• Other metal materials
• EMC countermeasure products

【Features of KR-G227 Inorganic Adhesive】 - It is an inorganic liquid adhesive with a powdered hardener additive. - The liquid itself is odorless, and no volatile substances or harmful gases are generated during drying. - It cures through a dehydration condensation reaction caused by the hardener and drying. - The adhesive itself is non-flammable, highly heat-resistant, and does not degrade under ultraviolet light. - Viscosity can be adjusted by adding water.

• glue
• Coating Agent

★ The fire from the stove ignited the vinyl curtains and disinfectant... A two-story wooden store was completely burned down, with one person in critical condition and 11 others injured. There has been an increase in fires at restaurants and homes compared to last year. Many of you may have installed non-fire-retardant vinyl sheets as an emergency measure, but from a disaster prevention perspective, there is a growing possibility of receiving warnings from the fire department in the future. Please make sure that the products you use have the "fire-retardant certification label" and are fire-retardant processed products. ■ Antiviral processing, antibacterial processing, fire-retardant processing 【Antiviral processing】 Organic synthetic type, blended PVC sheet/body (JP06125409X0007K) 【Antibacterial processing】 Organic synthetic type, blended PVC sheet/body (JP0122409A0002V) ● Reduces specific viruses on the product. ● Antiviral processing is not intended for the treatment or prevention of diseases. ● Complies with SIAA safety standards.

• others

● By simply attaching it to the vibration source, it suppresses noise and vibrations generated by the device, creating a comfortable space. ● Material selection can be tailored to the usage temperature environment and target frequency. ● We propose a new method of forming a vibration-damping layer through injection molding, as an alternative to the application of traditional vibration-damping sheets and coatings. ● It can be processed using various methods such as adhesive bonding of molded products, insert molding, and two-color molding. ● Noise and vibration control technologies can be classified into four categories: vibration damping, vibration isolation, sound absorption, and sound insulation, based on whether they reflect, insulate, or absorb the vibrational energy of vibrating substances (solids and air). ● NeoFeed is a vibration-damping material that absorbs the vibrational energy of solids. ● It efficiently attenuates solid vibrations and also reduces air vibrations (noise) generated by solid vibrations. ● A lineup of highly effective vibration-damping materials using non-PVC resins. ● In addition to standard sheet types with thicknesses of 1mm and 2mm, we also offer pellet types for thermoforming grades and film types of 125μm. ● We also accept various processing requests, including punching sheets and laminating with other materials such as sound-absorbing foam.

• Other polymer materials

● Perfect for those who want to conduct microbial testing quickly! Microbial testing, which previously took at least 24 hours, can now provide results in about 10 minutes. ● The ability to conduct rapid microbial testing allows for continuous monitoring of bacterial counts, leading to "reduction of inventory until shipment" and "strengthening of risk management." We are conducting demonstrations at our company. ● Additionally, we are also evaluating samples at our research facility, so please feel free to contact us. 【KB-VKH01】 □ Measurement time is approximately 10 minutes. □ Detection using a 0.4μ dedicated membrane filter and nucleic acid staining reagent. □ Can be used for managing not only live bacteria but also dead bacteria and total bacteria. 【KB-VKH02】 □ Live bacteria measurement type. □ Measurement time is approximately 6 minutes. □ Detection using a 0.4μ dedicated membrane filter and active staining reagent. □ End model.

• Other inspection equipment and devices

This is a reagent used during measurements with the microbial rapid testing device, BioProlar. In addition to bacteria, staining reagents and methods for yeasts and other organisms are currently under development. For more details, please feel free to contact us.

• Other inspection equipment and devices
• Analytical Equipment and Devices

●This is one of the consumables required when using the microbial rapid testing device, BioProler. ●You can select the appropriate filtration chip according to the type and amount of the sample. ●If the sample contains a large number of components or substances other than bacteria, using the appropriate filtration chip will allow you to measure samples that would otherwise be difficult to measure.

• Other inspection equipment and devices
• Analytical Equipment and Devices