東洋精機製作所 List of Products and Services

●This is a testing machine for thermal aging tests of materials such as plastics and rubber. ●Unlike general constant temperature chambers or dryers, this oven is specially designed for thermal aging tests, with conditions such as temperature distribution, wind speed, and air replacement rate inside the chamber carefully considered based on testing standards like JIS and ISO.

• Thermostatic chamber
• Environmental Test Equipment
• Testing Equipment and Devices

● It can be stacked in two layers, saving space! ● It is also possible to purchase the upper and lower sections separately.

• Thermostatic chamber
• Environmental Test Equipment
• Testing Equipment and Devices

To eliminate the effects of additive migration, aging tests will be conducted by heating within a glass tube.

• Testing Equipment and Devices
• Environmental Test Equipment

-

• Testing Equipment and Devices
• Weather resistance test
• Environmental Test Equipment

The corn calorimeter is a testing device that measures the rate of heat generation and heat quantity based on the theory that "the amount of heat generated and the amount of oxygen consumed are constant (13.1 MJ per kg of oxygen)" through a method of measuring oxygen consumption during the combustion of organic materials. It is used for performance evaluation of fire-resistant materials based on the Building Standards Act. Since it allows for understanding the combustion behavior and smoke generation of various materials, it greatly contributes to research on fire resistance characteristics.

• Testing Equipment and Devices
• Analytical Equipment and Devices
• Other measurement, recording and measuring instruments

-

• Testing Equipment and Devices

Automotive interior materials are subject to safety standards for combustion and are used as testing equipment for that purpose.

• Testing Equipment and Devices

● The workability has been improved by the front door that opens and closes up and down. ● The position of the smoke exhaust section and control panel can be selected depending on the installation location.

• Testing Equipment and Devices

-

• Testing Equipment and Devices

The D-NP type also supports the Clemens scratch hardness test for decorative panels.

• Strength Testing Equipment
• Testing Equipment and Devices

Type NP is also compatible with the Clemens scratch hardness test for decorative panels.

• Strength Testing Equipment
• Testing Equipment and Devices

Reproduce the condition during cleaning with a brush and evaluate the extent of damage to surfaces such as coatings.

• Testing Equipment and Devices

Since it can be applied at a constant speed, it can create a coating film with a uniform thickness without causing uneven application.

• Testing Equipment and Devices

The drying and curing time of paints, inks, adhesives, etc., is measured non-contactly by irradiating the surface of the sample with laser light and analyzing the reflected interference fringe pattern.

• Testing Equipment and Devices
• Other measurement, recording and measuring instruments

This product applies digital holography technology to non-contact and quantitative evaluation of the drying and curing processes of paints and adhesives, visualizing the drying distribution. By understanding the drying process, it enables the optimization of manufacturing lines and allows for the calculation of the necessary amount of paint and the setting of drying times based on the desired painting conditions. Furthermore, it is expected to be applicable to the evaluation of the curing process of light-curable adhesives and the drying and curing analysis of ink dots, contributing to printable electronics.

• Testing Equipment and Devices
• Other measurement, recording and measuring instruments

We evaluate color transfer caused by friction with dyed fabrics and similar materials.

• Testing Equipment and Devices

When converting pigments into paints or inks, a vehicle (dispersing agent) is added and ground in, but there are various methods for this process. This machine is specifically designed for testing based on JIS K 5101, where a small amount of pigment and vehicle is placed between two glass plates and rotated while applying pressure with a weight to mix them. Therefore, the setting of test conditions such as load and rotation speed can be easily adjusted according to the type of sample.

• Testing Equipment and Devices
• Emulsifier/Disperser

Due to the electric operation, the reproducibility of measurements is improved.

• Strength Testing Equipment
• Testing Equipment and Devices

This is a new optical interference measurement system that uses the statistical characteristics of the scattering field (laser speckle) generated when a rough surface is illuminated with a laser, which is considered a standard in a statistical sense, and is not subject to limitations imposed by the precision of optical elements or the measurement targets. 【Product Features】 〇 Capable of sub-nanometer measurements 〇 Non-contact and non-invasive measurement 〇 Applicable to biological entities such as plant growth and changes in trees *For more details, please download the PDF or contact us.

• Other inspection equipment and devices
• Other measurement, recording and measuring instruments
• Other image-related equipment

The behavior of the ink film separating between rolls on a printing machine is significantly influenced by the characteristics of the ink, making it one of the important factors in evaluating printability. The inkometer is a device that models the functions of each roll on the printing machine and measures the tack of the ink that appears here. Tack is a property related to the viscosity of the ink, representing its adhesiveness, and is closely related to the surface strength of the paper and trapping, among other factors. ● Operator name (up to 20 characters), sample name (up to 80 characters), and test conditions (up to 50 characters) can be registered. ● The removal of the top roll and vibration roll has become easier.

• Testing Equipment and Devices
• Viscometer

The behavior of the ink film when it separates between rolls on a printing machine is greatly influenced by the characteristics of the ink, making it one of the important factors in evaluating print suitability. This device models the functions of each roll on the printing machine and measures the tack of the ink that appears there.

• Testing Equipment and Devices
• Thermostatic chamber

-

• Testing Equipment and Devices

-

• Testing Equipment and Devices
• Other measurement, recording and measuring instruments
• Viscometer

○Capacity: 0.5ml ○Plate weight: 115g (acrylic plate) ○Reference standards: JIS K 5101, K 5701 *Optional load plate (glass plate)

• Testing Equipment and Devices
• Other measurement, recording and measuring instruments
• Viscometer

The viscosity is determined from the descent speed of the rod when a sample is filled between a ring and a rod with a certain gap, and the rod is pressed with a constant force.

• Testing Equipment and Devices
• Other measurement, recording and measuring instruments
• Viscometer

-

• Testing Equipment and Devices
• Other measurement, recording and measuring instruments
• Viscometer

The size of the grains is determined from the depth of the two sloped grooves.

• Testing Equipment and Devices

We will vibrationally blend pigments and glass beads in a glass container and compare their dispersibility.

• Testing Equipment and Devices
• Emulsifier/Disperser
• Sieve/Shaker

By applying water pressure from one side of the sample surface and checking for water leakage after a certain period of time, a waterproofness test can be easily conducted.

• Testing Equipment and Devices

●By attaching additional weights to the balanced arm, the test load can be up to 2000g. ●The number of reciprocations of the sample stage can be set to your desired count using the preset counter.

• Testing Equipment and Devices
• Strength Testing Equipment

-

• Testing Equipment and Devices

It is a friction testing machine used to evaluate color transfer due to friction from printing inks and the fuzzing of paper.

• Testing Equipment and Devices

●It can be used as a simple manual injection molding machine to shape test pieces in the form of dumbbells or strips. ●By replacing the inner cylinder, it can also be used as a pelletizer to directly feed amorphous samples obtained from mixing (cylinder diameter ∅20mm) and pelletize them.

• Testing Equipment and Devices
• Injection Molding Machine

The F type Permeameter measures air permeability of fabrics. Applies a specific suction pressure (differential pressure) to sample and evaluates by air flow rate.

• Testing Equipment and Devices

The smoothness of paper and similar materials is evaluated by the rate at which air leaks through the gap between the sample pressed against a smooth glass surface and its smooth surface.

• Testing Equipment and Devices

-

• Testing Equipment and Devices

-

• Testing Equipment and Devices

-

• Testing Equipment and Devices

You can easily punch out using the rotational force of the handle.

• Testing Equipment and Devices

You can easily punch through samples with air cylinder drive!

• Testing Equipment and Devices

A roller with a mass of 2 kg is moved back and forth at a speed of 10 ± 0.5 mm/sec to press the sample onto the test plate. ● Compact tabletop design that does not take up much space. ● A sample mounting fixture that minimizes air entry between the sample and the test plate is included as standard. ● Comes with a roller resting fixture for when not in use.

• Testing Equipment and Devices
• Strength Testing Equipment

It can be conveniently used as a desktop type and is equipped with safety devices.

• Testing Equipment and Devices

- It is a compact tabletop type that can be easily used anywhere. - The pressure plate can be moved and finely adjusted with just the pump's pressurization operation. (Automatic switching, two-speed type) - It has a fast heating rate and excellent temperature distribution. - It is equipped with an overheat prevention circuit. - It satisfies the functions of two units (heating and cooling) with one device. (Model with water cooling plate) - Air cooling unit [Model AIR-C] (optional for water-cooled plate specification, increases cooling efficiency by flowing air through the water cooling pipe, includes a check valve to prevent backflow of cooling water, manual operation for opening and closing the air and cooling water valves) - Other options include: safety cover [Model SC], interlock type safety cover [Model ISC], temperature controller [Model T-CONT] (programmed heating, maximum heating capacity of 12°C/min, maximum number of heating steps 16), heat plate parallel assistance mechanism [Model PARA], over-temperature prevention unit [Model TEMPG].

• Testing Equipment and Devices

● It is a compact tabletop type, so it can be conveniently used anywhere. ● The pressure plate can be moved and finely adjusted with just the pump's pressurization operation. (Automatic switching, two-speed type) ● It has a fast heating rate and excellent temperature distribution. ● It is equipped with an overheat prevention circuit. ● One unit satisfies the functions of two units (heating and cooling). ● Cooling compression can be performed without lowering the temperature of the heating plate due to the rotary cooling plate.

• Testing Equipment and Devices

This is a press machine that incorporates operations such as degassing and cooling control to make the sample molding conditions more reliable.

• Testing Equipment and Devices