三橋製作所 List of Products and Services

The "PD-200" is an actuator used for moving detectors when performing lamination control or centering control. Equipped with a potentiometer, it allows for position feedback. It can perform web lamination and centering control. 【Features】 ■ For detector movement ■ Equipped with a potentiometer ■ Allows for position feedback ■ Capable of web lamination and centering control *For more details, please refer to the PDF document or feel free to contact us.

• Solenoid Actuators

The "PD-100" is an actuator for moving detectors. It is used when you want to manipulate the sensor position in combination with control panels such as PW-1000 and PW-800. 【Features】 ■ For moving detectors ■ Can be combined with control panels such as PW-1000 and PW-800 ■ Used when you want to manipulate the sensor position *For more details, please refer to the PDF document or feel free to contact us.

• Solenoid Actuators

The "CM-412F" is a motor for yaw control that can be combined with devices such as the PW-1310. It uses a DC motor and is used in combination with control panels, operation panels, and detectors as various drive sources for yaw control. Please use it when you design and manufacture the drive mechanism yourself. 【Features】 ■ Can be combined with devices such as PW-1310 ■ Used when you design and manufacture the drive mechanism yourself ■ Adopts a DC motor *For more details, please refer to the PDF materials or feel free to contact us.

• Other motors

The "PW-1310-3" is a control panel for web serpentine control. It can connect medium-sized drive units such as the actuators PD-811 and PD-850. All detectors in the Q series can be connected. The operating status can be easily understood at a glance, and settings are also easy to configure to accommodate various usage methods. 【Features】 ■ Compatible with our standard detectors ■ Three bank memories available ■ By switching banks for various types of web, suitable settings can be called up ■ Equipped with a large LCD display (8 lines x 40 characters) ■ Operating status can be easily understood at a glance *For more details, please refer to the PDF materials or feel free to contact us.

• Control Panel

The "PGS-400/PGS-701" is an offset roll guide used for controlling meandering in the intermediate process of web transport. It includes the large roll guide "PGS-400" driven by a ball screw and the medium roll guide "PGS-701" driven by a cam. The servo amplifier is equipped with various protective functions to safeguard the servo amplifier, including overcurrent protection, overload protection, and motor heating protection. 【Features】 ■ High rigidity and low backlash ■ High speed and high responsiveness ■ AC servo motors do not require magnets on the rotor ■ Maintenance-free due to brushless design ■ Comprehensive protective functions *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "PDS-610/PDS-400" is an actuator used for controlling the lateral movement of web unwinding and rewinding sections when combined with the PW-1000 and PCS-1000. The lineup includes "PDS-610" for use with a total weight of 1500 kg or less, and "PDS-400" for use with a total weight of 1000 kg or less. The servo amplifier is equipped with various protective functions to safeguard the servo amplifier, including overcurrent protection, overload protection, and motor heating protection. 【Features】 ■ High speed and high responsiveness ■ AC servo motors do not require magnets in the rotor ■ Excellent power rate for high responsiveness ■ Maintenance-free due to brushless design ■ Comprehensive protective functions *For more details, please refer to the PDF document or feel free to contact us.

• Solenoid Actuators

The "PCS-1000" is an AC servo motor driver used in combination with the PW-1000. Since the AC servo motor does not require magnets in the rotor, it has low rotor inertia and excellent power rating, allowing for high responsiveness and precise control. It has no wear from brushes, requires no maintenance or inspection, and can be used in clean rooms. 【Features】 ■ High speed and high responsiveness ■ Maintenance-free due to brushless design ■ Comprehensive protective functions ■ The servo amplifier is equipped with various protective features ■ Functions such as overcurrent protection, overload protection, and motor heating protection are included *For more details, please refer to the PDF document or feel free to contact us.

• Other process controls

The PC-930 is a DC motor driver designed to be used in combination with the preamplifier PE-700. It is capable of driving medium to large actuators. There are two modes: one controlled by ON-OFF input and another that controls speed proportional to the input voltage. When controlling proportional to the input voltage, the PE-700 driver and detector should be connected. 【Features】 ■ Equipped with two operating modes ■ Mode controlled by ON-OFF input and speed controlled proportional to input voltage ■ When controlling proportional to input voltage, connect the PE-700 driver and detector *For more details, please refer to the PDF document or feel free to contact us.

• DC Motor

The "PD-850/PD-900" is an actuator used for controlling the wavering of the web unwinding and rewinding sections. It is used in combination with the control panel and detectors of the Q-series for items with a total weight of 9,400 kg or less (the PD-900 is for items with a total weight of 13,300 kg or less). Additionally, it is equipped with a micro switch for center position detection, allowing the actuator to be set to the center position in advance when the center stop switch on the control panel is pressed. 【Features】 ■ Long lifespan and easy maintenance ■ Almost no wear parts due to the use of a ball screw in the drive mechanism ■ Equipped with a micro switch for center position detection *For more details, please refer to the PDF materials or feel free to contact us.

• Actuator

The "PD-650S" is an actuator used for controlling the wandering of the web during unwinding and rewinding. It can be used in the direction of gravity for wandering control during vertical web transport. It is used in combination with the control panel and detectors of the Q-series. Since it employs a ball screw in the drive mechanism, there are almost no wear parts, resulting in a long lifespan and easy maintenance inspections. It is equipped with a micro switch for center position detection. 【Features】 ■ Long lifespan and easy maintenance inspections ■ Uses a ball screw in the drive mechanism ■ Almost no wear parts, long lifespan, and easy maintenance inspections ■ Equipped with a micro switch for center position detection ■ Usable in the direction of gravity *For more details, please refer to the PDF document or feel free to contact us.

• Actuator

The "PD-650" is an actuator used for controlling the wavering of the web's unwinding and rewinding sections. Since it employs a ball screw in its drive mechanism, it has very few wear parts, ensuring a long lifespan and easy maintenance. It is used in combination with the Q-series control panel and detectors for items with a total weight of 3500 kg or less. Additionally, it is equipped with a micro switch for center position detection, allowing the actuator to be set to the center position in advance when the center stop switch on the control panel is pressed. 【Features】 ■ Used for items with a total weight of 3500 kg or less ■ Long lifespan and easy maintenance ■ Employs a ball screw in the drive mechanism ■ Very few wear parts, ensuring a long lifespan and easy maintenance ■ Equipped with a micro switch for center position detection *For more details, please refer to the PDF document or feel free to contact us.

• Actuator

The "PD-620-100" is an actuator used for controlling the wavering of the web's unwinding and rewinding sections. It is used in combination with the Q-series control panel and detectors for items with a total weight of 1200 kg or less. The stroke is 100 mm, which is shorter compared to the "PD-620." Additionally, it is equipped with a micro switch for center position detection, allowing the actuator to be pre-set to the center position when the center stop switch on the control panel is pressed. 【Features】 ■ Used for items with a total weight of 1200 kg or less ■ Stroke is 100 mm ■ Long lifespan and easy maintenance ■ Uses a ball screw for the drive mechanism ■ Minimal wear parts, ensuring a long lifespan and easy maintenance ■ Equipped with a micro switch for center position detection *For more details, please refer to the PDF document or feel free to contact us.

• Actuator

The PD-620 is an actuator used for controlling the wavering of the web unwinding and rewinding sections. Since it employs a ball screw in the drive mechanism, it has very few wear parts, ensuring a long lifespan and easy maintenance. It is used for items with a total weight of 1200 kg or less. It can be used in combination with the Q-series control panel and detectors, and is equipped with a micro switch for center position detection. 【Features】 ■ Used for items with a total weight of 1200 kg or less ■ Long lifespan and easy maintenance ■ Employs a ball screw in the drive mechanism ■ Very few wear parts, ensuring a long lifespan and easy maintenance ■ Equipped with a micro switch for center position detection *For more details, please refer to the PDF document or feel free to contact us.

• Actuator

The "PD-610" is an actuator used for controlling the wavering of the web's unwinding and winding sections. It is used in combination with the control panel and detectors of the Q-series for items weighing up to 1600 kg. Equipped with a micro switch for center position detection, it allows the actuator to be set to the center position in advance when the center stop switch on the control panel is pressed. Additionally, because it employs a ball screw in its drive mechanism, there are very few wear parts, resulting in a long lifespan and easy maintenance. 【Features】 ■ Used for items weighing up to 1600 kg ■ Long lifespan and easy maintenance ■ Employs a ball screw in the drive mechanism ■ Very few wear parts, resulting in a long lifespan and easy maintenance ■ Equipped with a micro switch for center position detection *For more details, please refer to the PDF document or feel free to contact us.

• Actuator

The "PD-710" is an actuator used for controlling the winding and unwinding of web materials and for managing the wavering of the winding section. It is used in combination with the control panel and detectors of the Q-series. Compared to the "PD-610," it has a shorter overall length, making it suitable for installation in small spaces. Additionally, it is equipped with a micro switch for center position detection, allowing the actuator to be set to the center position in advance when the center stop switch on the control panel is pressed. 【Features】 - Short overall length, ideal for installation in small spaces - Long lifespan and easy maintenance - Uses a ball screw in the drive mechanism - Minimal wear parts, ensuring long life and easy maintenance - Equipped with a micro switch for center position detection *For more details, please refer to the PDF document or feel free to contact us.

• Actuator

The "PD-400-1/50" is an actuator used for controlling the wavering of the web's unwinding and winding sections. It is equipped with a micro switch for center position detection, allowing the actuator to be set to the center position in advance when the center stop switch on the control panel is pressed. It can be used in combination with the Q-series control panel and detectors, and compared to the "PD-400," its driving speed is reduced to 1/5, making it suitable for applications that require high precision. 【Features】 ■ Used in applications requiring high precision ■ Long lifespan and easy maintenance ■ Uses ball screws in the drive mechanism ■ Minimal wear parts, ensuring long lifespan and easy maintenance ■ Equipped with a micro switch for center position detection *For more details, please refer to the PDF materials or feel free to contact us.

• Actuator

The "PD-400-75" is an actuator used for controlling the wavering of the web's unwinding and rewinding sections. Compared to the "PD-400," it has a larger stroke (75mm) and is used in combination with the Q-series control panel and detectors. Additionally, it is equipped with a micro switch for detecting the center position, allowing the actuator to be set to the center position in advance when the center stop switch on the control panel is pressed. 【Features】 ■ Large stroke (75mm) ■ Long lifespan and easy maintenance ■ Uses a ball screw in the drive mechanism ■ Minimal wear parts, long lifespan, and easy maintenance ■ Equipped with a micro switch for center position detection *For more details, please refer to the PDF document or feel free to contact us.

• Actuator

The "PD-400" is an actuator used for controlling the wavering of the web's unwinding and rewinding sections. It is used in combination with the Q-series control panel and detectors for items weighing up to 1300 kg. Since it employs a ball screw in its drive mechanism, there are almost no wear parts, resulting in a long lifespan and easy maintenance. Additionally, by pressing the center stop switch on the control panel, the actuator can be pre-set to the center position. 【Features】 ■ Used for items weighing up to 1300 kg ■ Long lifespan and easy maintenance ■ Employs a ball screw in the drive mechanism ■ Almost no wear parts, resulting in a long lifespan and easy maintenance ■ Equipped with a micro switch for center position detection *For more details, please refer to the PDF document or feel free to contact us.

• Actuator

The PS-800 is a photoelectric transmission type detector that detects the position of line marks and boundaries printed on transparent webs. The light source is a tungsten bulb, and the light receiving element is a silicon photodiode. It is suitable for when you want to control based on printed references rather than web edge references. It is used in combination with the Q-series control panel and drive units for web wandering control. 【Features】 ■ Detects the position of line marks and boundaries printed on transparent webs ■ Ideal for when you want to control based on printed references *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The PS-711 is an infrared transmission web edge detector. Due to its photoelectric design, it offers high accuracy and is suitable for controlling opaque materials and non-woven fabrics. It is used in combination with the Q-series control panel and drive units for web wander control. The light source uses a light-emitting diode, eliminating the need for replacement, and it is controlled using a pulse lighting method, making it largely unaffected by disturbances. 【Features】 ■ The light source uses a light-emitting diode, eliminating the need for replacement ■ The light source is controlled using a pulse lighting method ■ Largely unaffected by disturbances ■ High accuracy, suitable for controlling opaque materials and non-woven fabrics *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The PS-45 is an ultrasonic transmission-type web edge detector. It is used in combination with the control panel and drive of the Q-series for web wander control. It is suitable for detecting transparent objects as it is not affected by the web's transparency, color, or pattern. Additionally, it is more compact compared to the PS-400, allowing it to be used in narrow spaces. 【Features】 ■ Compact body ■ Stable detection due to ultrasonic technology ■ Can be installed in places previously deemed impossible due to mounting space constraints ■ Can reliably detect various web colors, patterns, and transparencies without being affected *For more details, please refer to the PDF materials or feel free to contact us.

• Sensors

The PS-400 is an ultrasonic transmission-type web edge detector. It is suitable for detecting transparent objects as it is not affected by the web's transparency, color, or pattern. It is used in combination with the Q-series control panel and drive units for web deviation control. By detecting changes in airborne ultrasound, it reliably detects the edges of the web without being influenced by the color, pattern, or transparency of various webs. 【Features】 - Not affected by the web's transparency, color, or pattern - Suitable for detecting transparent objects - Stable detection due to ultrasonic technology *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

The "PS-350" is a photoelectric transmission type web edge detector. It has approximately twice the detection width compared to the "PS-300," allowing it to accommodate various web widths without moving the detector. The detection width is wide at 440mm, making it suitable for centering control using two units. The light source uses a light-emitting diode, eliminating the need for replacement, and it is used in combination with the Q-series control panel and drive machine for web deviation control. 【Features】 ■ Wide detection width ■ Can be used for centering control by installing two units ■ Uses a light-emitting diode as the light source ■ Accommodates various web widths without moving the detector *For more details, please refer to the PDF materials or feel free to contact us.

• Other measurement, recording and measuring instruments

The PS-300 is a photoelectric transmission type web edge detector. It has a wide detection width of 200mm, making it suitable for centering control when using two units. It is used for web wandering control in combination with the Q-series control panel and drive unit. The light source uses a light-emitting diode, so there is no need for replacement, and due to its wide detection width, it can be used for centering control by installing two units. 【Features】 ■ Wide detection width ■ Can be used for centering control by installing two units ■ Light source uses a light-emitting diode *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The PS-270 is a reflective detector that is resistant to ambient light and capable of high-sensitivity detection. It detects printed line marks and boundaries on webs using a photoelectric reflective method. It is used for web skew control in combination with the Q-series control panel and drive units. It can also detect sheets with gold and silver backgrounds, and the new optical system enhances its ability to detect mark lines on "shiny" sheets such as gold and silver. 【Features】 - By adopting a large lens, the detection distance is set to 30mm, and the spot diameter is φ7.5. - The detection point is easy to see, making position adjustment simple. - Equipped with a newly designed circuit inside the detector. - Not affected by sunlight or surrounding lighting. - Capable of detecting sheets with gold and silver backgrounds. *For more details, please refer to the PDF materials or feel free to contact us.

• Other measurement, recording and measuring instruments

The PS-261 is a reflective detector used for web wandering control in combination with the Q-series control panel and drive unit. It detects printed line marks and boundaries on the web using a photoelectric reflective method. By adopting LEDs as the light source, lamp replacement is no longer necessary. Additionally, by switching the settings on the control panel, it is possible to switch between line and edge detection without replacing the detector. 【Features】 ■ Photoelectric reflective type ■ Uses LED as the light source ■ No need for lamp replacement ■ Ability to switch between line and edge detection without replacing the detector ■ Detects printed line marks and boundaries on the web *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "PW-800" is a control panel for web serpentine control. It has simple functions and is easy to operate. It can drive all roll guides and small actuators, and sensors from the Q series, except for "PS-800," "PS-300," and "PS-350," can be connected. Compared to our conventional product (PW-1000), it has been miniaturized to one-fourth the volume, and the sheet key prevents dust from entering from the panel surface. 【Features】 ■ Compact control unit ■ Easy operation ■ Automatic setting of reference position with a single SET switch ■ Sensitivity adjustment can be increased or decreased with a switch ■ Sheet key adopted *For more details, please refer to the PDF materials or feel free to contact us.

• Control Panel

The "PW-2000" is a control panel for web serpentine control. It can connect medium-sized drive units such as actuators "PD-811" and "PD-850." All detectors in the Q series can be connected. It comes standard with input and output terminals for controlling the switching of operating modes and other functions via an external controller. 【Features】 ■ Compatible with our standard detectors ■ Three bank memories available ■ Equipped with a large LCD display (8 lines × 40 characters) ■ Capable of connecting medium-sized drive units ■ Standard input and output terminals *For more details, please refer to the PDF materials or feel free to contact us.

• Control Panel

The "PW-1310" is a control panel for web serpentine control. It can connect large drive devices such as the actuator "PD-900" and the motor "CM-402F." It is compatible with all detectors in the Q series. Three bank memories are provided for various settings, and each bank stores settings such as gain and zero adjustment, allowing for the retrieval of optimal settings by switching banks for different types of web. 【Features】 ■ Compatible with our standard detectors ■ Three bank memories available ■ Equipped with a large LCD display (8 lines × 40 characters) ■ Capable of connecting large drive devices *For more details, please refer to the PDF materials or feel free to contact us.

• Control Panel

The "PW-1000" is a control panel for web skew control. It can connect to all detectors in the Q series, and all drive units can use all roll guides and small actuators. It comes standard with input and output terminals for controlling the switching of operating modes via an external controller. 【Features】 ■ For web skew control ■ Compatible with our standard detectors ■ Equipped with 3 bank memories ■ Large LCD display (8 lines x 40 characters) ■ Standard input and output terminals *For more details, please refer to the PDF materials or feel free to contact us.

• Control Panel

The "PGM-15" is a compact roll guide developed for customers currently using conventional models "PG-50, 80, 100, 110, 800," with the aim of allowing them to replace these models with the "G series" without significantly changing the current installation state. It is suitable for narrow webs under 600mm and is ideal for controlling the wandering of webs in packaging machines and sanitary product manufacturing machines. 【Features】 - Adopts maintenance-free brushless DC motor - Built-in ball screw type ultra-compact actuator - Can powerfully pivot the roll frame without play - The pivot torque of the roll frame is more than three times that of the conventional gear type "PG-100" - Easy wiring as it connects to PEM type controllers and PSM type sensors via connectors only *For more details, please refer to the PDF document or feel free to contact us.

• others

The "PSM-46W Series" is an ultrasonic edge sensor for detecting the edges of webs. The "46WS" with a switch panel allows for mode switching and teaching operations directly on the sensor body, making it convenient. Additionally, models with a switch panel can be configured into a simple system (consisting only of the drive unit and sensor) without using the "PEM type" controller. 【Features】 ■ Detects the edges of webs ■ Performs web skew correction in combination with dedicated controllers and drive units ■ Available in two shape types: "W" and "WX" ■ Detects the edge position of the web by changes in ultrasonic transmission ■ Can accurately detect without being affected by color, pattern, or transparency *For more details, please refer to the PDF materials or feel free to contact us.

• Sensors

The "PEM-3000" is a controller that combines dedicated sensors and drive mechanisms to control the web's serpentine motion. It features a color LCD touch panel, achieving universal operability. It comes standard with external input/output terminals for controlling the LPC from outside and analog output terminals for monitoring the state of the web, providing an interface with external devices. 【Features】 ■ Achieves universal operability ■ Intuitive operation through the color LCD touch panel ■ Standard terminals for switching input for operating mode and alarm output for external control ■ Standard analog output for monitoring the state of the web detected by sensors ■ Connection with sensors and drive mechanisms is made via connectors, allowing for easy wiring *For more details, please refer to the PDF materials or feel free to contact us.

• controller

The "CS-300" is a pouch stocker that aligns and boxes pouches (small bags) cut into single or multiple bag units in a continuous packaging format using a filling and packaging machine. The rotation of the shutter is driven by an AC servo motor. Despite its high-speed operation, it maintains a quiet working environment. Adopting a two-stage shutter system, it continues to count pouches continuously without stopping the supply during box changeovers. 【Features】 ■ Device capacity: 240 units/min ■ Shutter rotation is driven by an AC servo motor ■ Shutter uses a smoothly embossed plate ■ Two-stage shutter system adopted ■ Equipped with a 10.0-inch color touch panel for easier operation *For more details, please refer to the PDF document or feel free to contact us.

• Food Packaging Machinery

The "KS-2200" is a rotary pouch cutter that improves the precision of perforations and cuts by adopting a slide unit. It can register up to 50 varieties. The cutter unit and perforation unit come with an angle adjustment function to correct diagonal cuts. The depth of the notches can be freely adjusted during operation. 【Features】 ■ Improved precision of perforations and cuts due to the adoption of a slide unit ■ Easy operation with a clear 5.7-inch color touch panel ■ The depth of the notches can be freely adjusted during operation ■ The cutter unit and perforation unit are equipped with an angle adjustment function to correct diagonal cuts ■ Can register up to 50 varieties *For more details, please refer to the PDF document or feel free to contact us.

• cutter

The "OM-210a" is a noodle feeder that dispenses dried noodles such as ramen onto packaging machines. It is easy to connect to the packaging machine and simple to operate. It can easily synchronize with input signals from packaging machines and automatically dispense the noodles. 【Features】 - Dispenses dried noodles such as ramen onto packaging machines - Pursues compactness and high speed, achieving a user-friendly noodle dispensing machine - Easy connection to packaging machines - Simple operation - Can easily synchronize with input signals from packaging machines for automatic dispensing *For more details, please refer to the PDF document or feel free to contact us.

• Food Packaging Machinery

The "SMH Series" is a multi-line dispensing device that individually distributes pouches filled with powders or liquids such as soups and seasonings, and simultaneously introduces each pouch into containers that are transported in parallel. It realizes a transportation system that enables continuous transport. By changing the conveyor's intermittent operation to continuous operation, it stabilizes the introduction to the attachment while also achieving stable cutting with the "KD-4010 Pouch Dispenser." 【Features】 ■ Used in combination with our pouch dispenser (KD-4010) ■ Achieves approximately 1.5 times the speed compared to our conventional devices ■ Realizes a transportation system that enables continuous transport ■ Space-saving design ■ Multiple devices can be consolidated into one unit *For more details, please refer to the PDF document or feel free to contact us.

• Food Packaging Machinery

The "SMV Series" is a multi-line dispensing device that distributes individual pouches filled with powders or liquids such as soups and seasonings, and simultaneously inserts each pouch into containers that are transported in parallel. By using an AC servo-driven suction arm to hold the pouches during insertion, it allows for precise placement at the targeted insertion position, with minimal work misalignment during insertion. 【Features】 ■ Reliable insertion into the cup with the suction arm ■ Can be used in combination with our pouch dispenser (KD Series) ■ Enables accurate fixed-position insertion ■ Ideal for inserting lightweight pouches, as it is not affected by static electricity ■ Can accommodate different pouch sizes with simple guide adjustments *For more details, please refer to the PDF materials or feel free to contact us.

• Food Packaging Machinery

The "SMF Series" is a multi-line dispensing device that individually distributes pouches filled with powders or liquids such as soups and seasonings, and simultaneously inserts each pouch into containers that are transported in parallel. It is used in combination with our pouch dispenser (KD Series). By using two pouch dispensers, simultaneous insertion of two varieties or backup operation is also possible. 【Features】 - Individually distributes pouches and simultaneously inserts each pouch into containers that are transported in parallel. - Used in combination with our pouch dispenser (KD Series). - Space-saving design allows for multiple parallel fixed-position insertion with a single pouch dispenser. - By using our standard pouch dispenser, it supports a variety of standard options. - Using two pouch dispensers allows for simultaneous insertion of two varieties or backup operation. *For more details, please refer to the PDF document or feel free to contact us.

• Food Packaging Machinery

The "TM-200" is a taping machine that applies double-sided tape to pouches in a continuous package format. Compared to the conventional "TM-120," various adjustments can now be made without tools. With the addition of a reset switch and an LED for TM error indication, and by changing the operation switch to a illuminated type, it has become easier to see and handle. 【Features】 ■ Various adjustments can be made without tools compared to the conventional "TM-120" ■ Added reset switch and TM error indication LED, changed operation switch to illuminated type ■ Can cut and apply pouches one by one in sync with the packaging line ■ Prevents contamination of food and other items by adhering pouches to trays or packaging films ■ Application methods can be selected from chute application, stamp application, or adhesive application *For more details, please refer to the PDF document or feel free to contact us.

• Other packaging machines

The "CDR-100" is a card dispenser that reduces damage from separation claws by smoothly pulling cards out with a rotary mechanism. Conventional devices had limitations on operating speed due to their reciprocating motion, but by adopting a rotary continuous motion mechanism, we have achieved even higher speeds (capacity of 300 cards per minute). By utilizing an encoder, we can synchronize the rotation of the suction arm and the conveyor's transport, ensuring that the workpieces are reliably placed in a fixed position. 【Features】 - By creating an air layer between workpieces, it becomes possible to separate them, improving the reliability of retrieval compared to conventional devices. - The rotary mechanism reduces damage from separation claws by smoothly pulling cards out. - The adoption of a rotary continuous motion mechanism enables further acceleration. - Ensures that workpieces are reliably placed in a fixed position. *For more details, please refer to the PDF document or feel free to contact us.

• dispenser

The "CD-870SLIM" is a slim-type card dispenser designed for loading backing sheets, trays, lids, flat pouches, and more. It features our proprietary cam rack in the drive mechanism, enabling high stability and smooth operation that is gentle on the workpieces. The air consumption is approximately half of the conventional amount, at 50 liters/min. 【Features】 ■ Designed for loading backing sheets, trays, lids, flat pouches, etc. ■ Can easily synchronize and automatically load based on input signals from packaging machines and others. ■ Utilizes our proprietary cam rack in the drive mechanism. ■ Ultra-slim compact body. ■ Air consumption is about half of the conventional amount, at 50 liters/min. *For more details, please refer to the PDF materials or feel free to contact us.

• dispenser

The CD-920 is a high-speed card dispenser that places various cards, stickers, and backing sheets at a fixed position on a conveyor line. By adopting our unique combination cam (patent number 2673116) in the drive mechanism, we have achieved a compact and smooth operation. The card supply and insertion direction can be freely selected. 【Features】 ■ Pursues miniaturization and lightweight design, achieving a compact and user-friendly card dispenser ■ Can easily synchronize for automatic insertion based on input signals from packaging machines and others ■ Built-in counting function to count the number of inserted cards ■ Can be preset for settings ■ Uses a cam mechanism *For more details, please refer to the PDF materials or feel free to contact us.

• dispenser

The CD-870 is a card dispenser that allows for the input of backing sheets, trays, lids, flat pouches, and more. It uses a conveyor-type stock method, enabling the storage of a large quantity of workpieces. By adopting our unique cam rack in the drive mechanism, it achieves high stability and smooth operation that is gentle on the workpieces. 【Features】 - The stock method is conveyor-based, allowing for the storage of a large quantity of workpieces. - Our unique cam rack is used in the drive mechanism. - It provides high stability and smooth operation that is gentle on the workpieces. - It can easily synchronize and automatically input based on input signals from packaging machines and others. - Equipped with AC servo motor drive. *For more details, please refer to the PDF materials or feel free to contact us.

• dispenser

The "CD-820" is a device that inserts various cards, stickers, and backing sheets into a designated position on a conveyor line. By adopting our unique cam rack in the drive mechanism, it achieves a compact and smooth operation. The card supply and insertion direction can be freely selected. 【Features】 ■ Pursuing miniaturization and lightweight design, it realizes a compact and user-friendly card dispenser. ■ It can easily synchronize and automatically insert based on input signals from packaging machines and other equipment. ■ It has a built-in counting function that can count the number of inserted items and allows for preset settings. ■ It offers high stability and smooth operation that is gentle on the workpieces. *For more details, please refer to the PDF materials or feel free to contact us.

• dispenser