フロージャパン Product Lineup

Flow is a leading company in the development and manufacturing of ultra-high-pressure water jets and a top provider of robotics and assembly equipment. We offer environmentally friendly solutions through advanced technology to the manufacturing and industrial cleaning markets. In the early 1970s, the predecessor in charge of research and development became independent from Boeing and founded Flow Research. This marked the beginning of Flow. The ultra-high-pressure water jet, used as industrial cutting equipment, was our first product. Later, Flow invested in and patented the technology, successfully developing the world's first abrasive water jet capable of cutting hard materials up to 30.5 cm (12 in.) thick. For more details, please contact us or refer to our catalog.

In metal material cutting, there are methods such as laser and plasma, but issues like "the occurrence of distortion due to heat" and "difficulty in processing hard-to-cut materials like CFRP" are common concerns. Additionally, wire electrical discharge machining is suitable for thick materials, but the issue of processing time is a concern. Flow Japan's water jet cutting machine, the 'Mach 500 Series,' is equipped with an industry-leading ultra-powerful pump that operates at a pressure of 600 MPa, achieving high-speed and high-precision processing. It can cut materials over 100 mm thick and allows for adjustments to the cutting head and water flow according to the material, from soft to hard (reducing processing time by up to 1/10). With water jet cutting, hard-to-cut materials like CFRP, titanium, and Inconel can be easily cut! ★ For a limited time, we are offering a handbook filled with comparison data between water jet cutting and other methods for free! ★ → For more details, please download the PDF data from the link below.

The advanced material "carbon fiber reinforced plastic: CFRP," which balances high strength and lightness, is widely used in the aerospace and automotive industries, but it is characterized by its difficulty in processing. Did you know that water jet cutting is often chosen for its trimming processing? With router processing, distortion due to heat occurs, leading to secondary processing, but water jet cutting eliminates this concern and allows for high-precision processing in a short time. When processing 10 meters of 25mm thick CFRP, it can be done in less than one-third of the time required by a router. 【Introducing our flagship model】 The Flow Japan water jet cutting machine 'Mach 500 Series' is equipped with an ultra-powerful pump with the industry's highest class operating pressure of 600 MPa, achieving high-speed and high-precision processing. It can cut materials over 100mm thick and allows for adjustments to the cutting head and water flow according to the material, from soft to hard (reducing processing time by up to 1/10). ★ We are currently offering a free technical document titled "Why Water Jet Cutting is Chosen for CFRP Processing?" ★ *Please download the PDF data from the link below to view it.

When processing complex shapes with a water jet cutting machine, the entire processing procedure constantly repeats "acceleration ⇔ deceleration." In other words, it does not mean that cutting is always done at "maximum speed." ⇒ To shorten the cutting time of parts, it is necessary to focus on "acceleration"! Flow Japan's water jet cutting machine, the 'Mach 500/700 series,' can achieve an acceleration of 0.1 times, which is more than double that of other water jet systems, significantly reducing the time required for processing complex shapes. Furthermore, combined with a top-class ultra-powerful pump with a maximum operating pressure of 600 MPa, it enables high-speed and high-precision processing. It can easily cut materials over 100 mm thick and allows for adjustments to the cutting head and water flow to suit various materials, from soft to hard. ★ A pamphlet explaining the "Importance of Acceleration in Water Jet Cutting" is available for viewing via the "PDF Download" link below. ★ We have launched a YouTube channel! Please check it out through the link below!

The "NanoJet" is a high-precision, compact water jet machining center. It easily achieves high-output operations that deliver special parts with minimal floor space. For example, it excels in fine processing of small and fragile items, such as electronic devices (materials like glass and ceramics) and highly integrated semiconductor devices. It is also well-suited for cutting advanced machine materials that require precision and complex geometries, as well as for production environments that operate 24/7, providing maximum uptime and reliability. 【Features】 ■ Excels in fine processing of small and fragile items ■ Can be used in a space-saving environment compared to conventional machines ■ Completely sealed system suitable for the inherent cutting environment of water jets ■ Rapid comprehensive parts processing ■ Designed to meet application requirements *For more details, please refer to the PDF document or feel free to contact us.

This document introduces 14 reasons why water jets handled by Flow Japan Co., Ltd. are necessary. It outlines the reasons for considering a water jet cutting system as part of equipment acquisition plans, including versatility for business expansion, efficiency improvements through pressure, and productivity enhancements through labor-saving. You should be able to discover unexpected possibilities of water jets. [Excerpt of Contents] ■ Water jets are highly productive - Versatility for business expansion - Efficiency improvements through pressure - Productivity enhancements through labor-saving - Rapid setup - Complement existing technologies - Precision for taking on profitable work *For more details, please refer to the PDF document or feel free to contact us.

Do you have any concerns about processing like this? - Materials hardening due to heat effects... - Poor yield and a lot of material loss... - Materials being too thick... etc. These can be solved with water jet cutting! Please refer to the downloadable materials. [Downloadable Materials] ■ Tips for reducing processing costs and improving productivity ■ 14 reasons why water jet cutting is necessary ■ 'Why is water jet cutting chosen for CFRP processing?' *For more details, please download the PDF using the download button or feel free to contact us.

"Flow Waterjet" is a versatile cold cutting process suitable for processing building materials such as stone and ceramics. It can process ceramic materials, which are difficult to cut, without changing tools, and cutting at speeds exceeding 1,000 m/s achieves high processing precision while providing excellent surface finish. [Features] ■ Capable of cutting various materials such as natural stone, artificial stone, marble, ceramics, glass, and composite materials. ■ High-precision cutting: capable of internal and external contours, sharp angles, and diagonal cuts. ■ No direct contact between the cutting head and the workpiece, preventing mechanical stress on the product. ■ No generation of heat, dust, or smoke. ■ Achieves high-quality finishes, high productivity, and low operational costs. [Stone Cutting Solutions] - Dynamic Waterjet Technology - 2D Taperless WJ Cutting - Dynamic Waterjet XD - 3D Taperless WJ Cutting - Ultra Pierce VacuumAssist - Piercing process for brittle materials *For more details, please download the PDF or feel free to contact us.

We would like to introduce our "metal processing using water jet cutting." Abrasive water jet cutting is suitable not only for cutting aluminum and steel but also for processing high-value-added materials such as titanium, Inconel, bronze, and tool steel. Since it typically cuts with a narrow width of about 0.76mm to 1mm, it allows for nesting with minimal spacing and cutting shared lines of parts, maximizing material utilization. 【Features】 ■ Increased productivity with high-speed and high-precision processing ■ Fine processing due to very narrow cutting width ■ No issues with variations in material purity ■ Material savings and reduction of waste *For more details, please download the PDF or feel free to contact us.

We would like to introduce our "composite material processing" using water jet technology. By using an abrasive water jet, high-precision processing is possible for any combination of materials, regardless of shape or fine details. Additionally, since cutting is performed through an erosion effect rather than friction or shear, it allows for smooth cutting surfaces without fraying or delamination, minimizing the need for secondary processing. 【Features】 ■ Improved productivity with high-speed and high-precision processing ■ No delamination or fraying during cutting ■ Fine processing with a very narrow cutting width ■ Material savings and reduction of waste ■ All-direction cutting that accommodates fine corner sections *For more details, please download the PDF or feel free to contact us.

We would like to introduce our company's "stone and tile processing" using water jet technology. With abrasive water jet processing, there is no thermal impact or surface stress, allowing for processing that maintains the original beauty and strength of the stone and tile. Drilling holes for sinks and faucets, as well as cutting complex shapes at the edges of slabs, is easy. Water jet processing contributes to effective material utilization, cost reduction, and profit expansion. 【Features】 ■ Improved productivity with high-speed and high-precision processing ■ Ultra-fine processing and design processing with very narrow cutting widths ■ Material savings and reduction of waste ■ All-direction cutting that accommodates fine corner areas ■ Processing with a single pass according to material thickness *For more details, please download the PDF or feel free to contact us.

We would like to introduce our "food processing" using water jet technology. In general food cutting applications, the cutting width ranges from 0.01mm to 0.02mm. The very small incision (kerf) is similar to the thickness of human hair, resulting in minimal waste. Depending on the application, very fine cutting is possible. Additionally, since there are no blades or metal cutting involved, there is no concern about bacterial contamination from food to food or from tools to food, and there is no downtime for sharpening. The cutting quality is also very high, yielding clean edges without slipping or tearing. 【Features】 ■ Cutting can be done using only water ■ Easy integration with food processing machinery ■ Adjustable settings according to various processing targets ■ High safety for operators *For more details, please download the PDF or feel free to contact us.

We would like to introduce our "glass processing using water jet technology." From the processing of complex stained glass to drilling holes in glass and processing laminated glass for bulletproof applications, it can be widely used across various industrial fields with high cost performance. Since processing can be done in all directions, complex shapes can be processed in one go. Additionally, by utilizing vacuum assist, even fragile glass can be drilled without the worry of cracking or creating craters. 【Features】 ■ Capable of processing complex patterns ■ Improved productivity with high-speed and high-precision processing ■ Fine processing due to very narrow cutting widths ■ Material savings and reduction of waste ■ All-direction cutting that accommodates fine corner details *For more details, please download the PDF or feel free to contact us.

We would like to introduce our "laminated material processing and stacking cutting" using water jet technology. This processing method utilizes supersonic jet water streams to cut materials, allowing for the cutting of laminated materials or stacked materials in a single operation. It is possible to perform stacking cuts on parts with a certain thickness using all models of Flow's water jet systems. Additionally, since there is no thermal impact, stacking cuts can be made without the worry of interlayer melting, resulting in a clean cut surface. 【Features】 ■ Increased productivity with high-speed and high-precision processing ■ Fine processing with a very narrow cutting width ■ Material savings and reduction of waste ■ Processing in a single pass according to material thickness ■ Near-net shape processing is possible *For more details, please download the PDF or feel free to contact us.

We would like to introduce our "paper product processing" using water jet technology. It can cut cleanly at various speeds and angles, and can be easily integrated into automatic threading devices. Since the cutting edge does not dull, maintenance is reduced, and the operating cycle is extended. It can cut through bundles of coated paper without damaging the edges, allowing for remarkably fast processing tailored to the shape of diapers. 【Features】 ■ No cutting debris, resulting in good yield ■ Improvement of the working environment ■ Clean edges ■ Clean cutting surfaces ■ Minimal cutting width *For more details, please download the PDF or feel free to contact us.

We would like to introduce our "precision cutting processing" using water jet technology. By cutting with a narrow cutting width of approximately 0.76mm to 1mm, we can achieve nesting with minimal spacing and cut shared lines of parts, maximizing material utilization. Additionally, since there is no mechanical stress or thermal effects, and consequently no distortion, secondary processing such as finishing is generally unnecessary. 【Features】 ■ Fine processing with an extremely narrow cutting width ■ No issues with variations in material purity ■ Material savings and reduction of waste ■ Processing with a single pass according to material thickness *For more details, please download the PDF or feel free to contact us.

We would like to introduce our "Bevel Processing with Waterjet Cutting Machines." Thanks to the technology of "Dynamic Waterjet XD" developed by Flow, bevel cutting and 3D processing with waterjet have been realized. With a nozzle that can tilt up to 60 degrees, it is possible to process more complex shapes than ever before. Additionally, it can achieve a smooth cutting surface in a single operation, eliminating the need for secondary processing. 【Features】 ■ Improved productivity with high-speed and high-precision processing ■ Fine processing with an extremely narrow cutting width ■ No issues with variations in material purity ■ Material savings and reduction of waste *For more details, please download the PDF or feel free to contact us.

We would like to introduce our "thick material processing" using water jet technology. The quality of the processed surface is not affected by the thickness of the material, and since it is a processing method that does not generate machine load, distortion, or thermal effects, it results in a smooth cutting surface regardless of thickness. Due to the very narrow cutting width, nesting can be minimized, allowing for maximum utilization of materials without waste. 【Features】 ■ Increased productivity with high-speed and high-precision processing ■ Material savings and reduction of scrap ■ Since no vertical or horizontal forces are applied to the workpiece, simple clamping is sufficient ■ No thermal effects ■ Near-net shape processing is possible *For more details, please download the PDF or feel free to contact us.

The "Water Jet Mach 200c Cutting Machine" can be widely used in various fields from manufacturing to R&D with a variety of options. The operability and convenience make this product ideal for first-time water jet users. It can process thick materials with ultra-high pressure water. With a gantry structure that fully utilizes the processing area, it enables quick and precise motion control. 【Choose from advanced cutting heads】 ■PURE WATERJET - Water jet without abrasives is suitable for processing soft materials. ■STANDARD WATERJET - Using abrasives allows for processing various hard materials. ■DYNAMIC WATERJET - Achieves high-precision processing at four times the speed of conventional methods. *For more details, please download the PDF or feel free to contact us.