日本カンタム・デザイン List of Products and Services

【Features】 ■ Real-time measurement and monitoring ■ Quality control and standardization ■ Quantification of "appearance" color and turbidity ■ Reduction of management costs ■ Supports measurement of pH and conductivity ■ Compatibility with certain gases is also possible For more details, please refer to the catalog or feel free to contact us.

Dissolved and undissolved substances, as well as gases in a solution, may absorb light of a certain wavelength. Optek's colorimeter is a sensor that measures the presence or concentration of substances by measuring light absorption. There are visible light type and ultraviolet light type absorbance meters available. 【Features】 [Visible Light Type] ■ Supported units: APHA/Hazen, EBC, Lovibond, etc. ■ Wavelengths available: Select from 385 to 1000 nm ■ Capable of detecting one wavelength or two wavelengths in one light path [Ultraviolet Light Type] ■ Wavelengths available: Select from 254, 280, 290, 300, 313 nm ■ Capable of detecting one wavelength or two wavelengths in one light path For more details, please refer to the catalog or feel free to contact us.

Optek's turbidity meter is a sensor that can quantitatively measure substances contained in a solution (such as trace suspended solids, insoluble liquids, and bubbles). To accommodate solutions from low turbidity to high turbidity, it employs both scattering light measurement and absorbance measurement methods. 【Features】 [Scattering Light Type for Low Turbidity] ■ Turbidity: Usable for 0 to 300 degrees (0 to 500 ppm DE) ■ Achieves high-precision measurements [Absorbance Type for High Turbidity] ■ Turbidity: Usable for 300 degrees (500 ppm DE) and above ■ The measurement cell comes in two types: a pipe type that is installed in the middle of piping, and a probe type that is inserted into reaction tanks, etc. For more details, please refer to the catalog or feel free to contact us.

Optek's inline process analyzers (UV meters, colorimeters, turbidity meters) are systems that measure the UV, color, and turbidity of process fluids or gases using UV light, visible light, and near-infrared light. In addition to turbidity and color measurement during the process, they enable concentration detection of components contained in process solutions and gases, as well as quality control through the detection of trace contaminants. Quality control using UV meters, colorimeters, and turbidity meters, phase separation, anomaly detection, and more are being applied across various fields, including pharmaceuticals, petroleum and chemicals, and beverages. For more details, please refer to the catalog or feel free to contact us.

Optek's probe-type absorbance/turbidity sensor measures turbidity from the absorbance of near-infrared light and can measure solutions in the medium to high turbidity range. It features a seal-less sapphire window at the probe tip. There is no need for sampling, and a wide measurement range and optical path length can be selected. 【Features】 ■ Real-time measurement in piping and tanks ■ Uses near-infrared light that is not affected by the color of the liquid ■ Employs maintenance-free LED lamps ■ Easy installation on existing equipment ■ Autoclavable For more details, please refer to the catalog or feel free to contact us.

Optek is a world-leading manufacturer of inline process analyzers. As a global partner in the biotechnology industry, Optek provides advanced technologies such as excellent signal amplification technology, support for inline calibration, zero-point calibration, stray light suppression, and a multilingual user interface that facilitates on-site operations. [Biotechnology Applications] - Fermentation - Control of centrifuges - Ultrafiltration - Chromatography - Formulation and filling - Single-use For more details, please refer to the catalog or feel free to contact us.

Optek is a world-leading manufacturer of inline process analyzers. As a global partner in the pulp and paper industry, Optek provides advanced technologies such as excellent signal amplification technology, support for inline calibration, zero-point calibration, stray light suppression, and a multilingual user interface that facilitates on-site operation. [Pulp and Paper Applications] ■ Inline ClO2 Monitoring ■ White Liquor Filtration ■ Raw Water Quality ■ Effluent Monitoring ■ White Water Turbidity For more details, please refer to the catalog or feel free to contact us.

Optek is a world-leading manufacturer of inline process analyzers. As a global partner in the beer industry, Optek provides advanced technologies such as excellent signal amplification technology, support for inline calibration, zero-point calibration, stray light suppression, and a multilingual user interface that facilitates on-site operations. [Beer Brewing Applications] ■ Filter Control 11°/90° ■ Control of Separators ■ Yeast Management ■ Brewery Turbidity ■ Color Management For more details, please refer to the catalog or feel free to contact us.

Optek is a world-leading manufacturer of inline process analyzers. As a global partner in the chemical industry, Optek provides advanced technologies such as excellent signal amplification technology, support for inline calibration, zero-point calibration, stray light suppression, and a multilingual user interface that facilitates on-site operations. 【Chemical Industry Applications】 ■ Halogen concentration measurement ■ Filter control (filtration process management) ■ Color management and concentration measurement ■ Leak detection / condensate / carryover detection ■ Phase separation / interface detection For more details, please refer to the catalog or feel free to contact us.

Optek is a world-leading manufacturer of inline process analyzers. As a global partner in the food and beverage industry, Optek provides advanced technologies such as excellent signal amplification technology, support for inline calibration, zero-point calibration, stray light suppression, and a multilingual user interface that facilitates on-site operations. [Food and Beverage Applications] ■ Filters and centrifuges ■ Detection of concentration and hue ■ Phase separation (boundary detection / CIP) ■ Bleaching and mixing ■ Condensate and cooling water For more details, please refer to the catalog or feel free to contact us.

Optek is a world-leading manufacturer of inline process analyzers. As a global partner in the petrochemical industry, Optek provides advanced technologies such as excellent signal amplification technology, support for inline calibration, zero-point calibration, stray light suppression, and a multilingual user interface that facilitates on-site operations. [Petrochemical Applications] ■ Colorimetry of refined fuels ■ Quality of naphtha in crude oil atmospheric distillation units ■ Produced water in oil ■ Condensate and cooling water ■ Fuel analysis: Water in fuel For more details, please refer to the catalog or feel free to contact us.

The inline ultrasonic concentration meter LiquiSonic not only measures acid and alkali concentrations but also enables the detection of phase interfaces and the monitoring of complex reactions such as polymerization and crystallization. It contributes to monitoring optimal product quality and plant safety, as well as cost reduction through the efficient use of raw materials. It has been implemented in a wide range of industries, including chemicals and pharmaceuticals, steel, food technology, mechanical and plant engineering, and automotive manufacturing.

This is an inline viscometer capable of measuring from low to high viscosity. It supports a wide temperature range and high pressure. Measurements can be obtained in real-time inline, providing high reproducibility in a stable environment. 【Features】 ■ Real-time, high reproducibility measurements ■ Easily integrated into existing equipment ■ Optimization of production ■ Quality assurance through data collection ■ Supports maximum viscosity of 2,500,000 mPa·s ■ Compatible with temperatures from -40 to 450℃ (can accommodate even higher temperatures) ■ Maintenance-free structure *For more details, please refer to the related links or feel free to contact us.

We will be exhibiting at "Smart Energy Week" held at Tokyo Big Sight from February 19 (Wednesday) to February 21 (Friday), 2025. (Booth No: E14-36) We sincerely look forward to your visit. ★You can apply for your visit from the news page below! The "Micro Gas Chromatograph" is a product that supports continuous measurement of process gases by establishing a sampling line from the process, manufactured by I-GRAPHX. By using MEMS in the detector and column, it achieves miniaturization, lightweight design, shorter measurement times, and reduced consumption of sample gas/carrier gas compared to conventional gas chromatographs. Additionally, it supports the use of GC columns to obtain a wide range of analytical spectra. 【Features】 ■ Low energy and low carrier gas consumption ■ Short analysis time ■ Compact dimensions ■ Portable use of measurement quality found in laboratories ■ Low maintenance costs ■ Easy handling *For more details, please refer to the related links or feel free to contact us.

KxS Technologies' refractometer can determine the concentration and physical property changes of liquids flowing through a process by measuring the refractive index. The sensor itself has a compact design, allowing for flexible installation in various positions within the process. The DCM-20 does not have a dedicated display; instead, it allows for measurement display and setting changes via a web browser using analog or digital output. *For more details, please refer to the related links or feel free to contact us.*

TrueDyne Sensors in Switzerland is engaged in the development of a wide variety of micro sensors using MEMS technology. Various inline sensors, which are small enough to fit in the palm of your hand, require only a small amount of sample for measurement and can be installed in flexible locations. Additionally, since the amount of material used is relatively low, the products offer significant cost advantages and enable continuous measurements at multiple locations within a process.

The Fluid.iO ZMF series is a maintenance-free, robust, and compact gas sensor with a built-in transmitter that allows for direct installation in piping and tanks. The gases that can be measured include carbon dioxide (CO2), methane (CH4), propane (C3H8), and sulfur hexafluoride (SF6) as part of the standard lineup. 【Features】 - Excellent long-term stability of measurement values - Robust stainless steel housing - Maintenance-free NDIR - SIL2 certification / explosion-proof (ATEX) certification - High cost-effectiveness

The "Gas Cooler" is a gas measurement component manufactured by PSG, providing a solution that meets particularly high demands for sample gas quality. By using optional components (such as acid concentration meters, humidity meters, gas pumps, etc.), it can be configured as a compact sample gas conditioning system. Additionally, for cooling, we offer specially designed compressor-type and Peltier-type (thermoelectric) options. 【Features】 ■ Optimization of the jet stream heat exchanger principle ■ Minimal measurement gas leaching ■ Heat exchanger can be replaced without opening the housing ■ Long-duration hot gas bypass system without switching the compressor ■ Digital display showing temperature and alarms *For more details, please refer to the related links or feel free to contact us.

The "Sampling Probe" is a gas measurement part manufactured by PSG that allows for filter replacement without tools and without removing the sample line. It comes standard with a maximum gas filter area, enabling efficient dust removal and low maintenance operation. Additionally, it stabilizes gas measurements for CEMS (Continuous Emission Monitoring System) and process analysis and optimization. 【Features】 ■ Made of SUS316 for corrosion resistance ■ Standard connections for calibration gas introduction and back purge (reverse flushing) ■ Equipped with temperature alarm contacts ■ Compact protective housing suitable for outdoor installation under harsh conditions ■ Compatible with low to medium dust sampling *For more details, please refer to the related links or feel free to contact us.

The "Heated Sample Line (Heated Conduit)" is a gas measurement part manufactured by PSG. It plays a crucial role in transferring gas samples from the gas sampling probe to the sample conditioning system or analytical device. It is categorized into two types: the "Flexible Type Line," which has a bending radius of about six times the outer diameter of the line, and the "Molded Type Line," characterized by its robust exterior. **Features of the Molded Line:** - Temperature control via a temperature controller - PSG basic parallel heating cable - Temperature control up to 200°C - Extendable up to 300m - Internal lines can be made of PTFE, PFA, stainless steel, or special alloys *For more details, please refer to the related links or feel free to contact us.*

The MCQ-made gas mixer GB100PLUS can generate and dilute mixed gases from low flow rates, allowing for free setting of flow rates and concentrations. It is a high-quality, high-precision, automatically controlled gas mixer developed for laboratory use. It is an innovative all-in-one system that replaces traditional systems using multiple mass flow controllers. We offer specifications for 3-channel, 4-channel, and 6-channel configurations.

The MCQ-made gas mixer GB100 can generate and dilute mixed gases from low to high flow rates, allowing for free setting of flow rates and concentrations. It is a high-quality, high-precision, and automatically controlled gas mixer developed for laboratory use. It is an innovative all-in-one system that replaces traditional systems using multiple mass flow controllers.

The MCQ-made gas mixer GB3000/4000/6000 is specially designed for the mixing and dilution of non-corrosive gases. It is the best solution for generating, managing, controlling, and measuring gas mixtures and dilutions. Additionally, it allows for the management and control of mixed gases via a touch display or accompanying software. It is an innovative all-in-one system that replaces traditional systems using multiple mass flow controllers. Specifications are available in 3-channel, 4-channel, and 6-channel configurations.

The MCQ-made gas mixer GB NANO3/NANO4/NANO6 can generate and dilute mixed gases with the smallest flow rate in the product lineup. Specially designed for cell culture, it provides precise gas mixing and control, creating optimal culture conditions. It is an innovative all-in-one system that serves as an alternative to conventional pre-mixed gas cylinders. We offer specifications for 3-channel, 4-channel, and 6-channel models.

The MCQ-made gas mixer GB15K is a high-flow model specially designed for industrial applications. It can dynamically generate and dilute mixed gases at any time, allowing for free adjustment of flow rates and concentrations. It features a resistive membrane touch panel, enabling parameter changes even while wearing gloves.

The MCQ-made gas mixer GM Vacuum allows for simultaneous gas mixing, dilution, and pressure control. It is designed with space optimization in mind, making more effective use of the workspace compared to conventional models. Additionally, it is possible to manage and control the mixed gas using the accompanying software. We offer specifications for 1-channel, 2-channel, and 3-channel options.

In addition to our expertise in nano-order surface analysis equipment, we also propose resist solutions and maskless exposure devices for semiconductor processes.