三広アステック List of Products and Services

〇10L to 300L 〇This is a stainless steel container designed and planned for pharmaceutical manufacturing, enhancing cleanliness for the storage of raw materials and intermediate products. 〇The gaps at the edges of the container are completely sealed with full circumferential welding. The handles are made of stainless steel round bars, improving both cleanliness and strength. 〇By applying electropolishing as an option, cleanliness and corrosion resistance are further enhanced, including the removal of buffing dust.

〇4L to 1000L 〇This is a stainless steel container with a bottom that is sloped towards the nozzle direction, allowing for the discharge of contents from the discharge nozzle mounted at the bottom. 〇The standard nozzle is an ISO helical type. It can be connected to sanitary components such as sanitary valves. 〇It can be combined with a cart or stand. 〇The lid can be selected from three types: standard, clip-sealed, and lever band-sealed.

〇7L to 1000L 〇This is a stainless steel container with a bottom that is inclined towards the discharge nozzle direction, allowing for the discharge of contents from the discharge nozzle mounted at the bottom. 〇The standard nozzle is an ISO hygienic type. The mounting part of the nozzle has a finish that allows for good cleanability. 〇It is possible to connect with sanitary parts such as sanitary valves. 〇Smooth movement is possible due to the caster legs. 〇The casters use polyurethane wheels with bearings.

〇7L to 500L 〇The container has a conical hopper shape with a 90° bottom surface, allowing for complete discharge of the contents through the discharge nozzle mounted at the bottom. 〇The angle of the hopper can be adjusted from 60° to 135°. 〇The standard nozzle is an ISO helical type, compatible with sanitary parts such as sanitary valves. 〇Equipped with caster legs for smooth mobility. 〇The casters are polyurethane wheels with bearings.

○20L to 500L ○This is a legged conical hopper container with a diaphragm-type tank bottom valve. ○Compared to those with a helical structure, this stainless steel container has improved discharge performance of the contents due to the pipe-free design at the nozzle section. ○It has minimal dead space, making it suitable for combination with agitators. ○The tank bottom valve is available in flange type and direct weld type.

〇20L to 500L 〇It is a hopper container with legs and a bottom ball valve. 〇Compared to those with a helix, this stainless container has improved discharge performance of the contents due to the pipe-free design of the nozzle section. 〇With minimal dead space, it is suitable for combination with a stirrer.

〇20L to 500L 〇The container has a conical hopper shape with a bottom angle of 120°, allowing for a reduced overall height. 〇It is a stainless steel container that can discharge the contents completely without any residue from the discharge nozzle mounted at the bottom. 〇The standard nozzle is an ISO helix. It can be connected to sanitary parts such as sanitary valves. 〇Equipped with caster legs for smooth mobility. 〇The casters are polyurethane wheels with bearings.

〇20L to 500L 〇This is a 120° conical hopper container with a diaphragm-type tank bottom valve and legs. 〇Compared to those with a helix, this stainless steel container has improved discharge performance of the contents due to the pipe-free design at the nozzle section. 〇It has minimal dead space, making it suitable for combination with agitators. 〇The tank bottom valve is available in flange type and direct weld type.

〇20L to 500L 〇It is a hopper container with legs and a bottom ball valve at 120°. 〇Compared to those with a helix, this stainless container has improved discharge performance of the contents due to the pipe-free design of the nozzle section. 〇It has minimal dead space, making it suitable for combination with agitators.

This is a stainless steel container with a conical hopper shape at the bottom with an angle of 60° and a large diameter heel specification. It can be connected to a sanitary valve for powder and granular materials. A knocker can also be installed to prevent the adhesion and blockage of powder and granular materials.

〇20L to 500L 〇It is a stainless steel container with a conical hopper shape at the bottom with a 60° angle and a large diameter heel. 〇It can be connected to a sanitary valve for powder and granular materials. 〇A knocker can also be installed to prevent the adhesion and blockage of powder and granular materials.

〇4L to 1000L 〇This is a stainless steel container with a dished bottom. 〇Due to the dished shape, it is suitable for stirring operations using a handheld mixer and for discharging contents with handheld pumps, etc. 〇The lid can be selected from three types: standard, clip-sealed, and lever band-sealed. 〇By adding modifications to the lid of a custom container, the range of use can be expanded.

- The bottom of the container has a dished shape, allowing for complete discharge of the contents from the discharge nozzle mounted at the bottom, making it a stainless steel container. - The standard nozzle at the bottom is an ISO helix. - It is possible to connect sanitary components such as sanitary valves to the bottom nozzle. - Smooth movement is possible due to the caster legs. - The casters use polyurethane wheels with bearings.

This is a leg-mounted vessel with a diaphragm-type tank bottom valve. Compared to those with a helical design, this stainless steel container has improved discharge performance of the contents due to the pipe-free design of the nozzle section. It is suitable for combination with stirrers due to its minimal dead space. The tank bottom valve is available in flange type and direct weld type.

〇20L to 1000L 〇DTBV legged manhole container with tank bottom ball valve. This is a legged manhole container with a tank bottom ball valve. 〇Compared to those with a helical design, this stainless steel container has improved liquid discharge due to the pipe-free design of the nozzle section. 〇With minimal dead space, it is suitable for combination with agitators.

○20L to 1000L ○This is a legged container with a flat bottom. The discharge nozzle (drain) at the bottom can be changed in size and installation position. ○The standard nozzle is an ISO standard. It can be connected to sanitary parts such as sanitary valves. ○Equipped with caster legs for smooth movement. ○The casters are polyurethane wheels with bearings.

○35L to 80L ○The stainless steel container body and the frame can be separated. Since they can be separated, only the container body can be cleaned. ○The container body is of the sloped container type. It is placed on the frame using brackets attached to the container. ○The container is secured to the frame using eye bolt nuts or a plug-type pin.

○35L to 80L ○The stainless steel container body and the frame can be separated. Since they can be separated, only the container body can be cleaned. ○The container body is of the cone hopper type. It is placed on the frame using brackets attached to the container. ○The container is secured to the frame using eye bolt nuts or a plug-type pin.

○35L to 80L ○The stainless steel container body and the frame can be separated. Since they can be separated, only the container body can be cleaned. ○The container body is of the dished end type. It is placed on the frame using brackets attached to the container. ○The fixation of the frame and the container is done using eye bolt nuts or insertion-type pins.

○4L to 35L ○This is a stainless steel container that can be used as a raw material feeding container by connecting the bottom of the container to equipment or large containers. ○The bottom surface of the container has a conical hopper shape with a 90° angle. ○The angle of the hopper can be adjusted from 60° to 135°.

This is a stainless steel container that can be used as a raw material input container by connecting the bottom of the container to the helix of equipment or large containers. The bottom surface of the container has a dished shape.

This is a stainless steel container that can be used as a raw material feeding container by connecting the bottom of the container to the helix of equipment or large containers. The bottom surface of the container has a conical hopper shape with an angle of 120°. Compared to 90° HTF and 60° HTFW, it has a lower height for the same capacity.

○4L～20L ○This is a flat container with a heel rule on the bottom surface. The discharge nozzle (drain) at the bottom can be adjusted in size and installation position. ○The standard nozzle is an ISO heel rule. It can be connected to sanitary components such as sanitary valves.

This is a stainless steel container that can be connected to the bottom of the container with a helical structure for use in feeding raw materials, etc., into equipment or large containers. The bottom surface of the container has an eccentric conical hopper shape.

〇1L to 25L 〇This is a stainless steel container that can be connected to the bottom of equipment or large containers for the purpose of adding raw materials, etc. 〇The bottom surface of the container has a conical hopper shape with an angle of 60°.

〇1L to 25L 〇This is a stainless steel container that can be used as a raw material input container by connecting the bottom of the container to the helix of equipment or large containers. 〇The bottom surface of the container has an eccentric conical hopper shape.

〇0.5L to 3L 〇It is a stainless steel container with a conical hopper bottom that can be connected to a container for raw material input. 〇The hopper angle can be adjusted. 〇The standard nozzle complies with ISO standards. 〇Due to its small capacity, it can be connected to smaller containers.

〇 0.5L to 3L 〇 This is a stainless steel container with an inlet pipe attached to the nozzle part. 〇 It allows for smooth pouring of liquids and other materials when connected to other stainless steel containers. 〇 The length of the inlet pipe and the angle of the conical hopper can be adjusted. 〇 The standard nozzle complies with ISO rules.

○10L to 45L ○The lid has a conical hopper shape with a 60° angle. ○It is a convenient stainless steel container for storing powder and granular materials and for discharging contents. ○The attachment of the hopper lid to the container uses a simple sealing structure with a dedicated lever band (lever band sealing type). ○The opening of the hopper lid uses an ISO Halu. ○In addition to the Halu cap, it is also possible to connect sanitary parts such as valves.

This is a conical hopper lid for powder discharge that is attached to a stainless steel container. The nozzle size and angle can be adjusted according to the contents. HTL-24 to 39 uses a lever band for CTL, while HTL-43 and above use a split band.

The interior during inversion has a flat structure that makes it difficult for powder to accumulate at the connection between the stainless steel container body and the conical hopper lid, compared to the HTL hopper lid. The edge of the lid is welded all around. The nozzle size and angle can be adjusted according to the contents.

〇7L to 100L 〇Conventional legged ramp containers have a standard of three legs up to size 43. 〇To improve stability during movement when filled with liquid, we have introduced a lineup of four-legged, screw-in swivel caster specifications for sizes 21 to 47. 〇The conventional casters for size 47 have a fixed and swivel plate-type mount, but they are of the screw-in swivel caster specification.

〇7L to 100L 〇Conventional legged hopper containers have a standard of three legs up to size 43. 〇To improve stability during movement when filled with liquid, we have added a lineup of four-legged, screw-in swivel caster specifications for sizes 21 to 47. 〇The conventional caster for size 47 features a plate-type attachment that is fixed and swivel, but it is now available in a screw-in swivel caster specification.

〇7L to 100L 〇Conventional legged mirror-finish containers have a standard of three legs up to size 43. 〇To improve stability during movement when filled with liquid, we have added a lineup of four-legged, screw-in swivel caster specifications for sizes 21 to 47. 〇The conventional caster for size 47 features a plate-type mount that is fixed and swivel, but it is now available in a screw-in swivel caster specification.