三広アステック List of Products and Services

This is a parallel paddle mixer equipped with parallel stirring blades from the KB series of electric motor stirrers. It is a type of electric motor stirrer that mounts to a container using a Heller connection. For detailed specifications, please contact us.

This is an electric motor stirrer type that mounts to a container with a 〇-helix connection. Please contact us for detailed specifications.

It is an electric motor stirrer type that mounts on a container with a 〇-helix connection. A speed controller is standardly equipped. You can choose according to the container capacity.

This is an air motor stirrer type that mounts to a container with a 〇-helix connection. You can choose it according to the container capacity.

- The drive part (motor) and the bearing unit can be separated due to the magnetic coupling method. - Since it is installed in a sealed state with the container, there is no concern about leakage or contamination from the outside even when connected to a pressurized tank or vacuum container. - The drive part and bearing unit use sanitary clamp fittings, making it easy to attach and detach from the container. - The bearing part employs self-lubricating all-ceramic ball bearings suitable for clean environments.

■RB Type (Fixed Installation Type) - The bearing part is directly attached to the bottom of the container, and the drive part is mounted on the outside, allowing for stirring operations in a sealed state. - The magnetic coupling method allows the stirring blades to rotate and enables instant reversal. - Ceramic bearings are standard in the bearing part. SIP/CIP is possible. - Designed and manufactured according to the combination with the container, capacity, and stirring target. ■RBh Type (Mobile Installation Type) - The mobile bearing part and drive part allow the stirring blades to be attached at any desired location. - There are suction cup type (SUS + silicone rubber) and flat type (PEEK + PTFE) options for attachment to the container. - The drive part is fixed to the outside of the tank with a suction cup. - Designed and manufactured according to the combination with the container, capacity, and stirring target.

- The high-efficiency design of the impeller and stator minimizes the occurrence of cavitation, resulting in efficient stirring. - Compact and lightweight, it can be easily used for dissolution work on-site when equipped with a handy grip (optional). - A JIS 5K 50A flange (non-sealed) is standardly installed, and by removing the flange, it can be converted to a PF2B screw type. - With the Heller adapter (optional), Heller connection (4S) is also possible. Please use it for stirring low-viscosity materials.

- Achieved a compact and lightweight design compared to other mixers in the same class. - The high-efficiency impeller generates a strong stirring force. There is almost no occurrence of cavitation, allowing for efficient mixing. - The standard connection to the container is a JIS 10K 50A flange (non-sealed). - A hygienic flange adapter (optional) allows for hygienic connections. Please use it for mixing with low viscosity.

- It is used for heating and dissolving high-viscosity liquids and solidified materials in combination with a container. - The heater material is thin and sheet-like, making it lightweight and highly flexible. - It can be easily attached to the container using a hook spring. - It can be manufactured in various shapes to match the shape of the container. - For details and combinations with the container, please contact us.

- The maximum surface temperature of the heater is 450°C. - Temperature control can be done using an input adjuster that inputs the electric heating capacity, or with an automatic temperature controller that automatically controls the surface temperature of the heater using a built-in temperature sensing part. - The exterior is covered with stainless steel. - We can manufacture sizes ranging from small laboratory units to large 200L sizes, depending on the size of the container. - For combinations with containers and further details, please contact us.

This is a liquid crystal thermometer that adapts to the wide-ranging needs of various industries such as food, pharmaceuticals, and cosmetics, featuring high performance, high precision, and excellent versatility. Its outstanding responsiveness and accuracy make it an ideal field-installed thermometer to replace traditional bimetal thermometers. The digital temperature display uses an LCD digit size of 18 mm in height, allowing for clear reading from a distance. With the inclusion of a large lithium battery, it can display temperature for approximately five years. The case material is made of stainless steel and is waterproof. It can be used even in environments where some moisture or steam may enter the case, leading to condensation.

This is a sanitary thermometer for temperature measurement in pharmaceuticals and food. The outer casing and sensing part are made of SUS304, designed with a drip-proof structure to withstand pressure and steam during cleaning. The connection is an ISO hygienic connection. The filling liquid uses nitrogen gas, ensuring safety in case of any incidents.

- The tubeless heat exchanger can be easily disassembled, allowing for visual cleaning and sterilization of the liquid-contact parts. - In addition to its high heat exchange capacity, it features a compact design that saves space. - The connection for the inlet and outlet of the processing liquid and cooling water is a small-diameter Heli-Coil. - For more details, please contact us.

This is a triple-action static mixer (inline mixer stationary type) that can be connected with a 〇H connection. It is made of all stainless steel SUS316L, with buff polishing and electropolishing specifications. It is compatible with CIP (clean-in-place) and allows for easy cleaning with removable elements.

- Sanitary-compatible helix type - The stainless steel knocker is a relay knocker with a stainless steel body that prevents the adhesion and clogging of powder and granules to hoppers and tanks. - It is ideal for the pharmaceutical, food, and chemical industries, as well as other environments that require corrosion resistance and safety. - The easily detachable helix type is a clamp band-fixed knocker that can be manually attached and removed from small sanitary containers and chutes. - This stainless steel knocker is suitable for environments where frequent washing of containers is performed.

〇 The "Around Pump" is a convenient line pump that can be easily used in combination with a stainless steel container. 〇 It can be disassembled and cleaned for hygiene, is compact and lightweight for easy portability, and features a discharge section that can rotate 360 degrees, making it space-saving. ■ Features ・Compact size for portability ・Ideal for transferring and filling small quantities of various liquids ・Can be disassembled with one touch, making cleaning easy ・Space-saving design with a discharge outlet that can be set in any direction, 360 degrees ・Drive options include air motor (explosion-proof) or electric motor (100V)