三広アステック List of Products and Services

This is a liquid crystal thermometer that adapts to the wide-ranging needs of various industries such as food, pharmaceuticals, and cosmetics, featuring high performance, high precision, and excellent versatility. Its outstanding responsiveness and accuracy make it an ideal field-installed thermometer to replace traditional bimetal thermometers. The digital temperature display uses an LCD digit size of 18 mm in height, allowing for clear reading from a distance. With the inclusion of a large lithium battery, it can display temperature for approximately five years. The case material is made of stainless steel and is waterproof. It can be used even in environments where some moisture or steam may enter the case, leading to condensation.

• Thermometer

- The maximum surface temperature of the heater is 450°C. - Temperature control can be done using an input adjuster that inputs the electric heating capacity, or with an automatic temperature controller that automatically controls the surface temperature of the heater using a built-in temperature sensing part. - The exterior is covered with stainless steel. - We can manufacture sizes ranging from small laboratory units to large 200L sizes, depending on the size of the container. - For combinations with containers and further details, please contact us.

• Heating device

- It is used for heating and dissolving high-viscosity liquids and solidified materials in combination with a container. - The heater material is thin and sheet-like, making it lightweight and highly flexible. - It can be easily attached to the container using a hook spring. - It can be manufactured in various shapes to match the shape of the container. - For details and combinations with the container, please contact us.

• Silicon Heater

- Achieved a compact and lightweight design compared to other mixers in the same class. - The high-efficiency impeller generates a strong stirring force. There is almost no occurrence of cavitation, allowing for efficient mixing. - The standard connection to the container is a JIS 10K 50A flange (non-sealed). - A hygienic flange adapter (optional) allows for hygienic connections. Please use it for mixing with low viscosity.

• Mixer/agitator

- The high-efficiency design of the impeller and stator minimizes the occurrence of cavitation, resulting in efficient stirring. - Compact and lightweight, it can be easily used for dissolution work on-site when equipped with a handy grip (optional). - A JIS 5K 50A flange (non-sealed) is standardly installed, and by removing the flange, it can be converted to a PF2B screw type. - With the Heller adapter (optional), Heller connection (4S) is also possible. Please use it for stirring low-viscosity materials.

• Mixer/agitator

■RB Type (Fixed Installation Type) - The bearing part is directly attached to the bottom of the container, and the drive part is mounted on the outside, allowing for stirring operations in a sealed state. - The magnetic coupling method allows the stirring blades to rotate and enables instant reversal. - Ceramic bearings are standard in the bearing part. SIP/CIP is possible. - Designed and manufactured according to the combination with the container, capacity, and stirring target. ■RBh Type (Mobile Installation Type) - The mobile bearing part and drive part allow the stirring blades to be attached at any desired location. - There are suction cup type (SUS + silicone rubber) and flat type (PEEK + PTFE) options for attachment to the container. - The drive part is fixed to the outside of the tank with a suction cup. - Designed and manufactured according to the combination with the container, capacity, and stirring target.

• Mixer/agitator

- The drive part (motor) and the bearing unit can be separated due to the magnetic coupling method. - Since it is installed in a sealed state with the container, there is no concern about leakage or contamination from the outside even when connected to a pressurized tank or vacuum container. - The drive part and bearing unit use sanitary clamp fittings, making it easy to attach and detach from the container. - The bearing part employs self-lubricating all-ceramic ball bearings suitable for clean environments.

• Mixer/agitator

This is an air motor stirrer type that mounts to a container with a 〇-helix connection. You can choose it according to the container capacity.

• Mixer/agitator

It is an electric motor stirrer type that mounts on a container with a 〇-helix connection. A speed controller is standardly equipped. You can choose according to the container capacity.

• Mixer/agitator

This is an electric motor stirrer type that mounts to a container with a 〇-helix connection. Please contact us for detailed specifications.

• Mixer/agitator

○ Non-glass sight gauge "VIEWLINE" (Flow Sight) ○ Ideal for liquid transfer in pharmaceuticals, food, beverages, cosmetics, and chemical products. ○ Safe as it is not made of glass. ○ Complies with FDA 21CFR175.300 and 177.1550, and USP Class VI. ○ It is also possible to reinforce the exterior with a stainless steel guard. ○ Can be manufactured up to a maximum length of 1 meter.

• hose

○ Smooth PTFE Hose "SILFLON" ○ Ideal for liquid and steam lines in pharmaceuticals, food, beverages, cosmetics, and chemical products. ○ Complies with FDA 21 CFR 177.1550. ○ Offers a wide temperature range. ○ The exterior is made of silicone rubber, allowing for easy hand washing. ○ Can be manufactured up to a maximum length of 6 meters.

• hose

○ Smooth PFA Hose "Polysil" POLYSIL ○ Ideal for the transfer of liquids in pharmaceuticals, food, beverages, cosmetics, and chemical products. ○ Complies with FDA 21CFR177.1550 and USP Class VI. ○ Reduces rubber odor and transfer of smells through the hose. ○ Offers exceptional flexibility compared to conventional straight PTFE hoses. ○ The exterior is made of white silicone. ○ Can be manufactured up to a maximum length of 5.7m.

• hose

PFA Hose "Politec" (Standard, CC, CP) ○ Ideal for conveying liquids in pharmaceuticals, food, beverages, cosmetics, and chemical products. ○ Complies with FDA 21CFR177.1550 and USP Class VI. (CC complies only with FDA 21CFR177.1550) ○ CC and CP are ATEX compliant and have anti-static properties. ○ Reduces rubber odor and transfer of smells through the hose. ○ Offers exceptional flexibility compared to conventional straight PTFE hoses. ○ The outer layer is made of EPDM rubber, providing excellent chemical resistance. ○ Can be manufactured up to a maximum length of 20 meters.

• hose

○ Butyl rubber hose "V.T.A" ○ Ideal for steam lines in pharmaceuticals, cosmetics, and chemical products. ○ Complies with FDA 21CFR177.1550. ○ Can be manufactured up to 60 meters in length.

• hose

○ Nitrile rubber hose "NITRIFOOD" ○ Can be used in all clean fields such as pharmaceuticals, cosmetics, and chemical products. ○ Complies with FDA 21CFR177.2600. ○ Excellent oil resistance. ○ Can be manufactured up to a maximum length of 40m.

• hose

○EPDM Hose "MaxiFood" MAXIFOOD ○Ideal for the transfer of pharmaceuticals, cosmetics, and chemical products. ○Complies with FDA 21CFR177.2600. ○Our depot type has no wires and offers resilience. ○The exterior is finished with durable fabric.

• hose

○EPDM Hose "VAPROCESS" ○Ideal for steam lines used in pharmaceuticals, cosmetics, and chemical products. ○Complies with FDA 21CFR177.2600. ○The exterior is finished with durable fabric.

• hose

○ Ethylene Propylene Rubber Hose "DEPOTAL J" ○ Ideal for conveying liquids in pharmaceuticals, food, beverages, cosmetics, and chemicals. ○ Complies with the Food Sanitation Act and FDA 21CFR177.2600. ○ Reinforced with wire, making it flexible and resistant to crushing. ○ Can be used under reduced pressure. ○ The exterior is finished with durable fabric. ○ Can be manufactured up to a maximum length of 20 meters.

• hose

○Silicone Hose "Spiral Sil" SPIRSIL ○Can be used in all clean fields such as pharmaceuticals, food, beverages, cosmetics, and chemicals. ○Complies with FDA 21CFR177.2600 and USP Class VI.

• hose

○Silicone Hose "GSI 75 NT・NTP" GSI 75 NT・NTP ○Can be used in all clean fields such as pharmaceuticals, food, beverages, cosmetics, and chemicals. ○Available in NT (white) compliant with FDA 21CFR177.2600 and NTP (translucent) compliant with USP class VI.

• hose

○Silicone Hose "TRESSIL" ○Can be used in all clean fields such as pharmaceuticals, food, beverages, cosmetics, and chemicals. ○Complies with FDA 21CFR177.2600 and USP class VI.

• hose

The valve opens and closes due to the up and down movement caused by the buoyancy of the float part. It is made of all stainless steel.

• valve

The installation at the bottom of the tank is a heel connection. There is almost no stagnation, allowing for efficient discharge of the contents. The shape minimizes dead space at the bottom of the tank, making it ideal for combination with a stirrer.

• valve

- The installation to the tank is a sanitary rule connection. - There is almost no stagnation, allowing for efficient discharge of contents. - The shape minimizes dead space at the bottom of the tank, making it ideal for combination with a stirrer. - Stirring efficiency is improved, reducing concentration unevenness and preventing undispersed materials. - It can be disassembled for cleaning, and since the sliding parts do not come into contact with the liquid, there is little residue left inside the valve, which shortens cleaning time.

• valve

- Compact design that takes up no space. - The mounting area of the bottom flange is small, allowing installation on small containers. - There are no gaps at the joints, preventing liquid accumulation. - Disassembly and cleaning are possible.

• valve

- There are two types of installation for the tank: direct welding type and flange connection type. - There is almost no retention, allowing for efficient discharge of contents. - The shape of the tank bottom minimizes dead space, making it ideal for combination with a stirrer. - Stirring efficiency improves, making it less likely to cause concentration unevenness or undispersed materials. - It can be disassembled for cleaning, and since the sliding parts do not come into contact with the liquid, there is less residue left inside the valve, reducing cleaning time.

• valve

This is a sanitary shutter valve for powder containers. Disassembly and assembly can be easily performed. The opening and closing parts move smoothly due to the PTFE sheet. Connection to the container is easy with the use of a clamp connection. There are single clamp type and double clamp type available.

• valve

● It uses a silicone-coated valve body that is resistant to damage when opening and closing the tablet. ● It can be disassembled and reassembled without the need for tools. ● Its lightweight and compact design makes it easy to handle and does not take up much space for installation. ● The angle of the handle is adjustable.

• valve

This is a lightweight butterfly valve designed for powder applications. It can be disassembled and reassembled without the need for tools. Its lightweight and compact design makes it easy to handle and does not take up much space during installation. The angle of the handle can be adjusted.

• valve

●Disassembly and reassembly can be done without tools. ●The lightweight and compact design makes it easy to handle and does not take up much space for installation. ●The angle of the handle can be adjusted.

• valve

It is used for sampling contents by attaching it to containers and piping. It can also be used as a faucet for containers.

• valve

- The structure minimizes dead spots and enhances CIP effectiveness, making it less prone to contamination. - The design, which is well-versed in the properties of fluororesin, can maintain sealing power for an extended period.

• valve

- The unique seal structure improves durability against external leaks compared to conventional diaphragm valves. - Maximum operating pressure is 1 MPa. It reduces flow changes after steam opening and closing, as well as variations in valve lift.

• valve

This is a compactly designed ISO small-diameter butterfly valve. The seat area has a special shape that minimizes pressure loss, and the valve body features a single shaft design for a more sanitary structure.

• valve

- The valve body opening adjustment can be made on either side with a stopper mechanism. - The stopper has 10 positions from fully open to fully closed at 0°, 9°, 18°, 27°, 36°, 45°, 54°, 63°, 72°, and 90°.

• valve

- It has a structure without a liquid pocket between the valve body and the ball (valve body). - Due to the structure that completely wraps the ball with a Teflon sheet, fluid does not stagnate inside the valve. - No tools are required for disassembly and reassembly. - The lightweight and compact design makes it easy to handle and does not take up space during installation.

• valve

This is a compact design ISO small-diameter ball valve. The wetted parts are made entirely of SUS316L (SCS16), and all gaskets are made of PTFE, making it a valve with excellent corrosion resistance.

• valve

- The valve body is connected using a clamp band, making disassembly and assembly easy. - The handle operation direction can be changed by 90° depending on the orientation of the stopper ring. - It is equipped with a drain to prevent liquid accumulation. - There are also three-way and automatic valves available.

• valve

- It is possible to apply a fluororesin coating to the inner surface of the stainless steel container as an option. - We will propose appropriate materials and coating thickness based on the contents and usage conditions. ■ Main characteristics of fluororesin 1. Non-stick 2. Heat resistance and low-temperature properties 3. Slipperiness 4. Non-wettability 5. Wear resistance 6. Electrical properties 7. Chemical resistance and corrosion resistance 8. Conductivity (anti-static type)

• Stainless steel container

- When labeling stainless steel containers or bottles with product management numbers or contents, laser marking and electrolytic marking are possible. - Laser marking slightly shaves the surface of stainless steel using a laser beam for marking. - Electrolytic marking uses a special chemical solution on the stainless steel surface and burns it in electrically. - Laser marking and electrolytic marking are effective processing options when container management, such as validation, is required.

• Stainless steel container

You can perform passivation treatment on stainless steel containers and custom sanitary fittings, among others. By conducting passivation treatment as the final finishing of the product, corrosion resistance is improved. Passivation treatment allows for the maintenance of rust-resistant and beautiful products.

• Stainless steel container

This is our original T-nut and bolt set for flange-open pressurized containers. It has good cleanability and can be easily installed and removed with a sliding mechanism. Swing bolts and eye nuts can also be manufactured in specifications compatible with the testing of Type II pressure vessels and small pressure vessels.

• Stainless steel container

〇These are sanitary pumping parts for pressure vessels. 〇These are pumping parts for pressure vessels. 〇The liquid transfer pipe, pressure inlet, valve, safety valve, and sanitary pressure gauge can be combined with a helical conversion adapter to accommodate the nozzle size of the pressure tank. 〇Custom sizes can be manufactured depending on usage conditions and other factors.

• Stainless steel container

This is a sanitary pressure transfer unit for pressure vessels. It is a compact pressure liquid transfer unit that gathers a liquid transfer pipe, pressure inlet, valve, safety valve, and sanitary pressure gauge on a single header. It can be manufactured in custom sizes depending on usage conditions.

• Stainless steel container