ファスト List of Products and Services

We offer the compact applicator 'B4 Series' with simple and easy operation and low cost, along with the 'B4 Glue Line' which includes a hose and handgun. 【Features】 ≪B4 Applicator≫ 　■ Tank capacity of 4L. Large surface area allows for efficient adhesive dissolution. 　■ The large opening tank lid makes it easy to refill adhesive. 　■ The pump features two types of discharge methods: a "gear type" with a maximum capacity of 6kg/h that operates without pulsation, and a "piston type" with a maximum capacity of 29.3kg/h. ≪Heat Hose≫ 　■ A lineup of hoses with various inner diameters and lengths. ≪Handgun≫ 　■ Maintains even heat distribution from the tank to the nozzle. 　■ Lightweight and the nozzle can rotate 360 degrees, making it easy to work with and enabling precise application. *This is an all-in-one set of products necessary for adhesive application work. Please consult us regarding application methods such as beads, coatings, and spraying. For more details, please refer to the materials. Feel free to contact us with any inquiries.

A new series that enables significant electricity cost savings with cutting-edge design and technology: "Hot Melt Applicator New Model MICRON" The applicator of the conventional MICRON series has undergone a model change. Compared to before, we have successfully reduced power consumption significantly (compared to our previous model -40%). ○ Energy Efficiency By lengthening and thickening the fins that promote melting, we have increased the surface area inside the tank and achieved uniform heating within the tank. Additionally, by enhancing the insulation effect around the tank, we have shortened the time to reach the set temperature, thereby reducing the energy required to maintain the temperature during operation. ○ Usability To make operation easier, we have adopted a simple control panel. The tank lid cover opens wide, making it easy to refill adhesive and clean. The control panel slides with a 1/4 turn of a screw, allowing for easy access during maintenance. ● For other functions and details, please download the catalog.

The applicator "Micron Piston," which combines the efficiency characteristics of power consumption and adhesive usage, has been renewed. 【Features】 〇 Easy touch panel operation 〇 Programmable changes for each section from the main menu 〇 Designed with consideration for adhesives *For other functions and details, please download the catalog.

We have further improved the conventional operability and maintainability, while achieving significant savings on electricity costs through the new design.

According to the coating conditions, the hot melt is automatically supplied to the tank in the necessary amount → melted. It is also automatically supplied to the tank and melted when needed. As a result, the hot melt is not carbonized due to heat. By ensuring efficient supply and melting, the quality of the adhesive is maintained.

Practical Layout High-Capacity Applicator 【Features】 ○ Large gear pump type with tank capacities of 50L/120L/200L ○ Choose from three types of gear pump sizes and outlet positions ・MACRO50 　　 　Tank capacity: 50L 　　 　Dissolution capacity: 50Kg 　　 　 ・MACRO120 　　 　Tank capacity: 120L 　　 　Dissolution capacity: 120Kg 　　 　 ・MACRO200 　　 　Tank capacity: 200L 　　 　Dissolution capacity: 200Kg ● For other functions and details, please download the catalog.

■ Steel hot melt melting tank that can withstand harsh operating environments ■ User-friendly and easy access to the electrical cabinet □ Non-stick and anti-oxidation coated steel tank □ Selectable standby function □ Display of rotation speed and pressure □ Signal coupling key 0-10V □ Gear pump or foam pump with a maximum pressure of 10 MPa

An applicator with customization capabilities that leverages our company's original strengths, excelling in discharge accuracy, operability, and maintainability. 【Features】 - Developed for heat-conductive HM and high-viscosity HM - Compatible with all hot melts - Easy maintenance makes it ideal for prototypes and experimental machines - Expandable control panel - Supports high-viscosity and low-flow hot melts - Compatible with reactive hot melts - Systematization with pre-melters enables a variety of applications - Custom design and manufacturing available upon request - Multifunctional control panel ● For other functions and details, please contact us.

Compact applicator with simple and easy operability and low cost. 【Features】 ○ Two types of discharge methods The gear pump is equipped with a pressure relief valve for smooth resin delivery, with a maximum pumping capacity of 6 kg/hour. Pressure adjustment can be easily performed from outside the device. ○ Temperature control is possible from 40°C to 200°C (±0.5%). *Optional up to 230°C. ○ Tank section The B4 tank has a large surface area and features melting-promoting fins at the bottom, allowing for optimal melting rates. ○ External electrical input In addition to the motor start/stop switch, the B4 gear pump allows for external electrical input for the pump and motor from the master unit. ● For other functions and details, please download the catalog.

This is a compact applicator that achieves simple and easy operability at a low cost. The discharge volume can be adjusted using a variable gear pump. 【Features】 - The gear pump is equipped with a maximum pumping capacity of 5 kg/hour and a pressure relief valve to smoothly deliver the resin. The adjustment of the relief valve can be easily done from outside the device. ○ Temperature control is possible from 40°C to 200°C (±0.5%) *Optionally, it can be extended to 230°C. ○ Tank section The B4 tank has a large surface area, and the bottom of the tank is equipped with melting promotion fins, allowing for optimal melting rates. ○ External electrical input In addition to the motor start/stop switch, the B4 gear pump allows for external electrical input from the main unit for the pump and motor. ● For other functions and details, please download the catalog.

A multi-applicator that leverages the strengths of our original products, featuring customization, excellent discharge accuracy, operability, and maintainability. 【Features】 ○ Developed for thermally conductive hot melts and high-viscosity hot melts. ○ Compatible with all types of hot melts. ○ Easy maintenance makes it ideal for prototype and experimental machines. ○ Expandable control panel. ○ Supports high-viscosity and low-flow hot melts. ○ Compatible with reactive hot melts. ○ Systematization with pre-melters enables a wide range of applications. ○ Custom design and manufacturing available upon request. ○ Multifunctional control panel. ● For other functions and details, please contact us.

The tank-type applicator allows you to load hot melt adhesive into a tank, where it is heated and melted. Moisture-curing hot melt adhesives are often packaged in pouches and can be difficult to handle due to their high adhesive strength. To facilitate the handling of such hot melt adhesives, we have started selling a tank melter that allows you to place the entire pouch into a slug melter mounted on top of the tank and melt it directly with a cylinder. Since the slug melter is attached to the existing tank melter, you can choose the tank size according to the discharge capacity. By combining it with a 35 kg tank, it is suitable for applications that require quick responsiveness, such as supplying to roll coaters. 【Features】 - Tank size can be changed according to discharge volume (5, 10, 20, 35L) - Maximum discharge capacity of 8cc/rev (for single) - Operating temperature range of 40 to 200°C *For more details, please refer to the materials. Feel free to contact us with any inquiries.

【Features】 〇 Melting capacity of 5 kg/h 〇 Usable under various conditions, from simple applications to complex processes 〇 Easy insertion and removal of adhesive blocks 〇 Compact and lightweight, making it easy to integrate into production lines 〇 Combines safety and ease of use, with easy access to all areas * For other functions and details, please download the catalog.

【Features】 〇 Melting capacity of 10kg/h 〇 Usable under various conditions from simple applications to complex processes 〇 Easy insertion and removal of adhesive blocks 〇 Compact and lightweight, making it easy to integrate into production lines 〇 Combines safety and ease of use, allowing easy access to all areas *For other functions and details, please download the catalog.

Would you like to use a hot melt adhesive device for product packaging and sealing boxes, which melts with heat and solidifies at room temperature? By switching from double-sided tape to hot melt, you can reduce the number of work processes and lower costs. We will propose the desired equipment from a wide range of options.

We offer the compact applicator 'B4 Series', which achieves simple and easy operation at a low cost, along with the 'B4 Glue Line' that includes a hose and handgun. 【Features】 ≪B4 Applicator≫ 　■ Tank capacity of 4L. Large surface area allows for efficient adhesive dissolution. 　■ The tank lid opens wide for easy adhesive refilling. 　■ The pump features two types of discharge methods: a "gear type" with a maximum capacity of 6kg/h that operates without pulsation, and a "piston type" with a maximum capacity of 29.3kg/h. ≪Heat Hose≫ 　■ A lineup of hoses with various inner diameters and lengths. ≪Handgun≫ 　■ Maintains even heat distribution from the tank to the nozzle. 　■ Lightweight and the nozzle can rotate 360 degrees, making it easy to work with and enabling precise application. *This is an all-in-one set of products necessary for adhesive application work. Please consult us regarding application methods such as beads, coatings, and spraying. For more details, please refer to the materials. Feel free to contact us with any inquiries.

According to the coating conditions, the hot melt is automatically supplied to the tank in the necessary amount and then melted. It is also automatically supplied to the tank and melted when needed. As a result, the hot melt is not carbonized due to heat. By ensuring efficient supply and melting, the quality of the adhesive is maintained.

We offer a hand gun that allows for manual coating application of hot melt adhesives, which can be combined with various applicators and heat hoses. - Maintains even heat distribution from the tank through the hose to the nozzle - Lightweight and features a 360-degree rotating grip for ease of use and precise application - Coating width can be up to 20mm The application patterns include not only coating application but also bead application and spray application types. Actual coating application videos are currently available in the related video section below! For more details, please refer to the materials. Feel free to contact us with any inquiries.

"Micron+ FOAM" is a hot melt applicator that reduces adhesive consumption by foaming the adhesive. By mixing dry air (no nitrogen required) with the melted hot melt adhesive in the tank, the hot melt is foamed. This foaming increases the adhesive volume, enhancing thermal insulation and vibration effects. 【Features】 ■ Potential to reduce energy consumption by approximately 60% (according to MELER in Spain) ■ Adhesive consumption reduced by up to 50% ■ Increased adhesive volume (improved contact properties) ■ Enhanced thermal insulation ■ Improved vibration effects ■ Improved thixotropic properties *For more details, please download the PDF or feel free to contact us.