フロロテクノロジー List of Products and Services

The simplified fluorine coating exhibits strong non-stick properties. By applying the coating, it becomes difficult for adhesives to adhere, and it also reduces dirt such as fingerprints, grease, and water stains. Furthermore, it can be easily removed. This can save you the hassle of daily maintenance. 【This is effective in the following cases】 ■ Preventing adhesive from sticking to metal knives and scissors ■ Ensuring that tape does not stick to the blade when cutting adhesive tape ■ Making it easier to remove scale from faucet fixtures ■ Wanting to easily remove fingerprints from touch panel surfaces ■ Improving the slip properties of touch panels to enhance the user experience ■ Aiming to reduce cleaning time for fingerprints and dirt ■ Needing a durable anti-fouling coating that does not change the appearance ■ Scale (white stains) adhering to metal surfaces and becoming difficult to remove ■ Fingerprints being noticeable on stainless steel control panels and inner doors ■ Improving the transmittance of films used on displays and preventing fingerprints ■ Enhancing slip properties during operation *If you would like a free sample, please include "Sample Request" in your inquiry.

The simple fluorine coating exhibits strong non-stick properties. By applying the coating, it becomes difficult for adhesives to adhere, and it also reduces dirt such as fingerprints, grease, and water stains. Furthermore, it can be easily removed. This helps to eliminate the hassle of daily maintenance. 【It is effective in the following cases】 ■ Preventing adhesive from sticking to metal knives and scissors ■ Ensuring that tape does not stick to the blade when cutting adhesive tape ■ Making it easier to remove scale from faucet fixtures ■ Wanting to easily remove fingerprints from touch panel surfaces ■ Improving the slip properties of touch panels to enhance the user experience ■ Aiming to reduce cleaning time for fingerprints and dirt ■ Needing a durable anti-fouling coating that does not change the appearance ■ Scale (white stains) adhering to metal surfaces and becoming difficult to remove ■ Fingerprints being noticeable on stainless steel control panels and inner doors ■ Improving the light transmittance of films used on displays and preventing fingerprints ■ Enhancing slip properties during operation *If you would like a free sample, please include "Sample Request" in your inquiry.

The "FloroSurf FG-5093, 5095, 5097 Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. It does not contain PFAS regulated substances (such as PFOS and PFOA). Just one application provides a non-stick surface to the mold. It demonstrates excellent continuous release properties even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It has excellent durability and a proven track record of continuous release, and reapplication using a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to the mold material, enabling continuous release. ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nanoimprinting. ■ Easily applied with a brush or spray gun, drying at room temperature in 10 minutes. No need for external processing. ■ No need to remove the film during reapplication. ■ No transfer of release agent components, eliminating the need for cleaning of molded products (FG-5093, 5095). ■ Low odor and non-flammable, maintaining a good environment on-site (excluding aerosol types). ■ Applying it to the nozzle of extrusion molds reduces defects like blushing and melt fracture. Free samples are available for trial (limited to corporate clients)!

By applying an anti-fouling coating, fingerprints, oils, and water stains become less likely to adhere and can be easily removed. This helps reduce the hassle of daily maintenance. 【This is effective in the following cases】 ■ Want to easily remove fingerprints from touch panel surfaces. ■ Want to improve the smoothness of the touch panel and enhance the user experience. ■ Aim to reduce the cleaning time for fingerprints and dirt. ■ Need a durable anti-fouling coating that does not change the appearance. ■ Scale (white stains) adheres to metal surfaces and becomes difficult to remove. ■ Fingerprints are noticeable on stainless steel control panels and inner doors. ■ Improve the light transmittance of films used on displays and prevent fingerprints. ■ Increase smoothness during operation. *If you would like a free sample, please include "Sample Request" in your inquiry.

"FloroSurf FG-5090" is a coating agent that improves release properties by applying it to molds treated with fluororesin. (This product does not contain any PFAS regulated substances such as PFOA, PFOS, or PFHxS.) * It can be applied to molds treated with fluororesin and can be easily applied on the molding site using brushes or spray guns. * Just one application provides a non-stick surface to the mold, demonstrating excellent release properties even for complex and precise shapes. * There is no transfer or accumulation of dirt on the mold or workpiece. * It is non-flammable and does not fall under organic solvent regulations, eliminating the need for explosion-proof equipment, quantity management, and environmental measurement as stipulated by fire and safety laws. * If you would like a free sample, please include "Sample Request" in your inquiry.

The "Fluoro Surf FG-509X" is a surface treatment agent that allows for fluorine processing on the surface by applying it to resin-molded molds, enabling continuous release. It can be easily applied on-site using a brush, spray gun, or wiping. After application, it dries at room temperature in just 2 minutes. (This product does not contain any PFAS regulated substances such as PFOA, PFOS, or PFHxS.) * This surface treatment bonds to the mold surface, creating a durable release film that allows for continuous release. * It can also be applied to molds that have been conventionally fluorinated, further improving release properties. * The film thickness is only a few nanometers, making it suitable for nano and sub-micron level molds and nano imprinting, accurately reproducing precise surfaces. * It is non-flammable and does not contain organic solvents, eliminating the need for explosion-proof equipment, quantity management, and environmental measurement as stipulated by fire and safety laws. A water-based model "FG-505W" is also available as a VOC countermeasure model. * There is no need to remove the residual film during reapplication; you can simply apply another layer. * It has good gas release properties, reduces gas staining, and improves flow. * If you would like a free sample, please include "Sample Request" in your inquiry.

"FluoroSurf FG-5095W" is a fluorine treatment agent (release agent) for water-based resin molding molds. (This product does not contain any PFAS regulated substances such as PFOA/PFOS/PFHxS.) * Fluorine release processing can be easily applied on-site using a brush or spray gun. * The release component reacts and bonds to the mold surface, providing durability and continuous release properties. * The release agent component is dry and does not transfer to the molded product, eliminating the need for cleaning. * When the release performance decreases, reapplication will restore its effectiveness. * Applying it to the nozzle of extrusion molds can also reduce blushing. * It is water-based and does not fall under VOC regulations. It is non-flammable and does not contain organic solvents, making it easy to manage without the regulations stipulated by fire and safety laws. * The film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nano imprinting, accurately reproducing precise surfaces. * If you would like a free sample, please include "Sample Request" in your inquiry.

The "Fluoro Surf FG-509X Series" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. When applied to the mold with a brush or spray and dried at room temperature for about 10 minutes, it reduces the adhesion of the surface molding resin, demonstrating excellent release properties. It is particularly effective in situations where conventional release agents fail to work properly. The film is at the nanometer level, allowing for precise reproduction even on complex and intricate surface shapes. It has excellent durability, with a proven track record of continuous release over thousands of shots, and reapplication with a brush or spray can restore its performance. Since the release agent components do not adhere to the molded products, cleaning is unnecessary. Furthermore, regulated substances such as PFOS, PFOA, and PFHxS are not used. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Easily applied with brushes or spray guns, eliminating the need for outsourcing processing ■ No need to remove the film during mold reworking ■ No transfer of release agent components, making cleaning of molded products unnecessary ■ Low odor and non-flammable, maintaining a good working environment and easy management.

The "FloroSurf FG-509X Series" is a release agent that forms a dry fluorine film on the surface of molds. By simply applying it with a spray gun in our manufacturing facility and allowing it to air dry at room temperature, a dry, non-stick surface is imparted to the mold. There is no need to outsource processing to specialized contractors. The film is extremely thin, allowing for excellent continuous release properties even for complex and precise shapes. Additionally, the release agent components do not transfer, so cleaning of the molded products is unnecessary. Please try it in cases where conventional release agents do not work well during CFRP molding. Furthermore, our products do not contain regulated substances such as PFOS or PFOA. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ Film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nano imprinting ■ Easily applied with a brush or spray gun, with air drying in just 10 minutes at room temperature. No need for external processing ■ No removal of the film is required during reapplication ■ Low odor and non-flammable. Not classified as an organic solvent, significantly reducing legal management items Applying it to the nozzle of extrusion molds can also reduce haze. *If you would like a free sample, please contact us.

A high-performance release agent with proven results in various fields, the fluorine-based release agent "Fluorosurf" has been made into an aerosol. It can be easily applied on-site and exhibits excellent release properties after air-drying at room temperature. Additionally, it can be used as a substitute for release agents that have been discontinued by other companies. Please note that this product does not contain regulated substances (PFOA, PFOS, PFHxS). *If you would like a sample for use, please include "Sample Request" in your inquiry. (This offer is limited to corporate clients. It cannot be used for applications involving food or medical purposes.)

The "Fluoro Surf FG-5093" is a fluorine-based dry mold release agent. It is free of silicone, ensuring that molded products remain clean and do not require washing. It is the only release agent that does not cause cloudiness when molding transparent resins. With a thin film at the nanometer level, it demonstrates excellent release properties even for complex and precise shapes, maintaining accurate surface precision. It has high release properties and excellent durability, with a proven track record of continuous release over thousands of shots. It is particularly effective in situations where conventional release agents fail. 【Features】 ■ The release agent components react with the mold material to adhere strongly, allowing for continuous release. ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds. ■ It can be easily applied with brushes or spray guns, eliminating the need for outsourcing processing. ■ No removal of the film is required during mold reworking. ■ There is no transfer of release agent components, and cleaning of molded products is unnecessary. ■ When performance degrades, reapplication is as simple as top-coating! No need to remove the old film. ■ It has low odor and is non-flammable, helping to maintain a good working environment. ■ It does not use PFAS regulated substances (such as PFOS, PFOA, PFHxS, etc.).

"FluoroSurf" and "Mold-Free" provide excellent non-stick release properties to metal surfaces when applied. PFAS regulated substances (such as PFOS, PFOA) are not used. Please try it when conventional release agents do not work. 【Features】 ■ The fluoropolymer film reacts with the mold material to adhere strongly, enabling continuous release even when conventional release agents fail. ■ With a film thickness of just a few nanometers, it can faithfully reproduce surface shapes at the nano and sub-micron level. ■ FluoroSurf can be easily applied with brushes or spray guns, while Mold-Free can be applied with an aerosol. Application is completed in just 10 minutes at room temperature, eliminating the need for external processing like baked fluoropolymer. ■ There is no accumulation of dirt on the mold, and no transfer of components to the workpiece, eliminating the need for cleaning processes. (Excluding Mold-Free MF-02S) ■ It is also effective in improving resin flow. ■ It is non-flammable, thus not classified as hazardous under fire laws. (Excluding Mold-Free) It has low odor. A water-based model is also available for VOC countermeasures. ■ There is no need to remove the film during mold reworking. ■ It is effective in reducing surface defects in extrusion molding and addressing melt fracture issues.