山田マシンツール List of Products and Services

It is now an era where milling holders are selected and purchased according to the machining, just like choosing tools and equipment. In Japan, when purchasing automatic lathes, it is common to choose genuine milling holders. On the other hand, in Europe and the United States, there are many cases where non-genuine products are selected. Recently, there has been an increase in the processing of difficult-to-cut materials and compound machining. To address these, attention is also being drawn to automatic lathe milling holders. By selecting milling holders that match the machining, just like choosing equipment and cutting tools, they may become a reliable asset. High-torque holders, speed-up holders, and hob processing units that cannot be covered by genuine products cannot even be chosen if you are unaware of them. Please consider them as options when updating equipment or when you encounter difficulties in machining.

• Other machine tools
• lathe

The Microconic system is a collet chuck system for the rear main spindle (sub-spindle) of automatic lathes. It features a precision collet for small diameters that allows for easy numerical adjustment of clamping force, as well as an overgrip collet that can clamp over steps with a maximum diameter of 4 mm. The cartridge used for this system has a shape compatible with standard collets, allowing for easy installation on equipment without the need for modifications.

• Other cutting tools
• Processing Jig
• Chuck

With Adjust - Precisely Adjusting the Tool Height Bring your work to a new level with With Adjust and enjoy flexibility. This is an innovative and patented tool holder system ideal for turning operations on sub-spindles. Height adjustments can be made quickly and easily without compromising stability. Use With Adjust to fine-tune the path to the future of back work. This is a completely new adjustable tool holder system from With Cut. It allows for rapid height adjustments without losing stability. ■ Quick With fine-tuning adjustment screws and stable clamps, you can change the center height. Simply loosen one clamp screw from the head and shank of With Adjust - adjustments can be made. It's that easy. ■ Stable The shank and adjustable head are arranged together with the serrated surface on the X-axis and adjustment screws and springs on the Y-axis. The reproducibility achieved by removing and re-tightening the tool holder is less than 0.005.

• others

By reducing material waste during the cutting process, we can minimize losses and be environmentally friendly. It's truly a win-win with With Twin. If we increase the rigidity of the cutting tool, we can make the blade width narrower. This way, we won't waste material as chips. With this idea in mind, With Twin was developed.

• others

With the stability cultivated in WizThread, we present WizGroove for grooving operations. Grooving, where rigidity is put to the test, is where the stability that WizCut is particular about truly shines. Grooving is a plunging operation where the entire insert makes contact with the workpiece and cuts into it. In automatic lathe machining, grooving often poses challenges due to insufficient tool rigidity, which can lead to rough surfaces or dimensional inaccuracies, especially when working with hard materials. To address this issue, WizCut has developed WizGroove by applying the proven principle of the vertically positioned insert method from WizThread, achieving stable machining during the process. Similar to WizThread, it features a four-corner usable insert and an internal coolant holder that can handle up to 20MPa.

• others

**Features** ■ The insert is positioned vertically instead of lying horizontally. In machining hard or sticky materials, it is common for vibrations during processing to cause roughness on the flank surface or the generation of burrs. With-Cut has developed a unique shape that places the insert vertically to solve this problem. ■ We are particular about the finishing of the insert. To emphasize cutting performance, the cutting edge is finished with grinding. Many customers are surprised by the sharpness of the cutting edge at exhibitions, but to ensure that it is sharp yet not prone to chipping, we use carefully selected carbide to achieve both sharpness and durability. ■ We also offer internal coolant holders to further improve chip removal. Internal coolant holders have become quite popular recently. They are now quite common for internal diameter tools and grooving tools, but they have not been widely adopted in threading operations. With-Cut also offers internal coolant specifications for threading tools. *For more details, please refer to the PDF document or feel free to contact us.*

• Other machine elements

This is an easy-to-use coolant hose and fitting system designed to achieve internal oil processing. 【Main Features of Withhip】 ■ Flexible for easy handling, made of durable and wear-resistant stainless steel ■ Adopts a coupling method that allows for easy replacement ■ Rated for high-pressure coolant use with a pressure specification of 25Mpa ■ A wide range of components is available, allowing for flexible layouts tailored to machine specifications and applications. *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• connector
• nozzle

This is an insert for back-grinding that is also favored by Swiss people who prefer Swiss-made products.

• others

Yamada Machine Tool Co., Ltd. boasts a top share in screw gauges and sells various gauges as an agent for Daiichi Measurement Manufacturing, which supports Japanese manufacturing. In addition to standard gauges, we also welcome inquiries about custom products and calibration, so please feel free to contact us. ■ Gauges for Parallel Threads - Gauge for parallel threads - Standard screw gauge ■ Gauges for Taper Threads - Pipe taper screw gauge R - American standard pipe taper screw gauge NPT - American standard pipe tight taper screw gauge NPTF ■ Special Purpose Screw Gauges - Screw gauge for perpendicularity inspection - Screw gauge for coaxiality inspection - Adjustable screw ring gauge - Screw plug gauge for length/depth inspection - Gauge handle with coloring ■ Plain Gauges - Limit gauge for holes (carbide limit gauge for holes) - Limit gauge for shafts (carbide limit gauge for shafts) - Master gauge (carbide master gauge) - Taper gauge ■ Other Special Gauges - Plate-type height gauge - Plate-type depth gauge - Internal width gauge (keyway gauge) - Spline gauge and more.

• others
• Other measurement, recording and measuring instruments

■High-Performance Vertical Universal Measuring Machine ・Mestra + Touch ・Vectra - Touch ・V3/V4 Plus ・TVM ■High-Performance Horizontal Measuring Machine ・THV ・Horizon + Granite ・Horizon Premium ・Love Concept + Premium ・Love Concept Nano ■Non-Contact Surface Shape Measuring Machine ・TR-Profile + DH-8 ・TR-Scan ・TR-Scan Premium

• others
• Other measurement, recording and measuring instruments

Yamada Machine Tool Co., Ltd. is a distributor of Teclock, which boasts the top market share in durometers, and we sell various measuring instruments. In addition to selling measuring instruments, we also accept requests for repairs and calibrations, so please feel free to contact us. ■ Durometer (Rubber and Plastic Hardness Tester) The most famous product among Teclock's offerings is the durometer (rubber and plastic hardness tester). ■ A Variety of TECLOCK Products Measuring Around the World In addition to durometers, we sell a wide range of Teclock products including thickness gauges, lever tests, depth gauges, dial gauges, cylinder gauges, micro-hole tests, electronic products, and special digital gauges for measuring indentation depth. - Thickness Gauge - Lever Test - Depth Gauge - Special Digital Depth Gauge for Measuring Indentation Depth

• others
• Other measurement, recording and measuring instruments

Air pen that can mark various materials such as aluminum, iron, stainless steel, and brass without deforming the workpiece due to point pressure. 【Features】 ○ High-speed vibration of a super-hard stylus (needle) for marking with point pressure. ○ Marked characters and symbols can remain permanently without fading. ○ Desktop model that operates independently. ○ Low load. 　Due to marking with point pressure, there is minimal load on the workpiece, preventing degradation of shape accuracy. ○ Marking is possible on surfaces other than flat ones. 　Can mark directly on relatively small variations like bumps and curves. ● For other functions and details, please contact us.

• Other machine tools

● A size that feels natural even when placed in the shop ● Easily set up on a simple stand ● Can be placed anywhere as long as there is power ● Compact and easy to install in limited spaces ● Immediate and high-speed clean marking possible after installation ● Software that is easy to use on a PC ● Highest safety standards - Class 1

• Laser marker

The PZ turn is a head-split type tool developed for automatic lathes. It is a groundbreaking product that breaks the conventional wisdom of split tools with high precision and high rigidity, enabling off-machine setup in the world of automatic lathes. Since its domestic sales began in 2018, the lineup has been continuously expanded and evolved to be more user-friendly. This item is recommended for automatic lathe users who: - Face labor shortages and differences in operator skill levels - Want to increase productivity - Want to prevent defective products from flowing out due to trial cutting - Want to improve the working environment

• lathe
• byte
• Fuel system parts

Our company offers a wide range of "marking machines and devices" that can be selected based on the size and material of the item to be marked, as well as the working environment. We also have products that help ensure traceability, preventing accidents caused by hammering during manual stamping or mistakes in marking, while also reducing work time and improving productivity. 【Examples of Products】 ■ Handheld Inkjet Marker "Handjet EBS-250" It can read 2D codes with a scanner and immediately mark by wireless transfer. ■ Air Stylist Marker "XE320" Capable of stamping 2D codes on parts. Character size can be set in increments of 0.1mm. ■ Fiber Laser Marker "F20" Automatically marks serial numbers on the outer circumference of bearings with a diameter of φ40 to 300. *We are currently offering materials that introduce examples of how to utilize the above products. Please check it out from "PDF Download." Feel free to contact us as well.

• Marking machine
• Other markings

It can be securely fixed by screwing it in, allowing for reliable coolant supply to the targeted area. It is also ideal for air blow piping to remove chips. 【Features】 ■ Can be installed on general machine tools. ■ Can be freely selected and combined from a wide variety of types (1/2” and 1/4”). ■ Can be used at a maximum pressure of 80 bar. ■ Suitable for cooling, air blowing, and suction. ■ Excellent return on investment. ■ Anodized for long-lasting use. ■ Lightweight and easy to handle. ■ New design. ■ 100% manufactured in Switzerland. *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• connector
• nozzle

We handle the "Tool Holder" manufactured by Heimatec, developed for Shinkom machine users. Since the dimensions are the same as the standard holders for each model of lathe, no modifications to the machine are necessary for installation. You can easily install and experience the holders from Heimatec, a manufacturer specializing in tool holders. 【Features】 ■ Lineup will be gradually expanded ■ Maximizes the machine's capabilities ■ Special specifications will also be addressed gradually ■ A wide range of accessories such as nuts and wrenches available *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• lathe

We handle the "Rotary Tool Unit for Automatic Lathes" manufactured by a specialized overseas manufacturer for Japanese machine tools. It can be easily installed on existing equipment, contributing to reduced failures and improved accuracy and productivity. It has a proven track record of being installed in machine tools from major equipment manufacturers and is recommended for automatic lathe users engaged in complex and high-precision machining. 【Features】 ■ No modification of equipment is required; it can be used from the day it is installed. ■ "Sealing" prevents the internal inflow of cutting oil and is resistant to wear. ■ "Bearings" suppress heat generation and noise, achieving good runout accuracy. ■ "Grease" maintains excellent lubrication even at high rotational speeds. ■ Proven installation in machine tools from Citizen Machinery, Star Micronics, Tsugami, and others. *For more details, please refer to the materials. Feel free to contact us with any inquiries. ★ We will be exhibiting at "Mechatrotech Japan 2019," which will be held from October 23. Please refer to the basic information for the exhibition overview.

• Other work tools

Yamada Machine Tool, which handles machine tools and various tools, proposes processing tools for brass fitting parts. Traditionally, marking was done manually after machining, but by implementing marking within the lathe, the process can be streamlined. Additionally, using a "polygon cutter" that can be utilized on four corners can lead to a reduction in tool costs. [Proposal Details] ■ Marking within the lathe ■ Polygon cutter usable on four corners ■ Open-type die head that allows for quick return *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

This document presents the "Brigetti Slotting Unit," developed for those who want to process keyways and hexagonal holes more efficiently. It includes explanations of each part of the unit, guidelines for maximum processing width and conditions for different workpieces, as well as processing examples. [Contents] ■ Explanation of each part ■ First-time use ■ Grease replenishment ■ Maintenance ■ Inner diameter/outer diameter processing ■ Tool cycle information ■ Maximum processing width and conditions for different workpieces ■ Processing examples, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• lathe

This catalog introduces products such as the "Roller Burnishing" manufactured by YAMASA, which is handled by Yamada Machine Tool. It includes roller burnishing technology, single roller burnishing tools from the "SX Series," and multi-head burnishing tools from the "UX Series." As an agent for domestic and international manufacturers with excellent features, our company consistently provides unique sales and services to meet customer needs. [Contents] ■ Roller Burnishing Technology ■ Deep Rolling Technology ■ Single Roller Burnishing Tools SX Series ■ Single Roller Burnishing Tools RX Series ■ Single Roller Burnishing Tools RXS Series ■ Multi-Head Burnishing Tools UX Series *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• Other machine tools

This is a brand suitable for screw machining larger than ARC size and for rolling heads mounted as dedicated machine attachments. ■ Features of VABS (Vabs) Screw Rolling Heads - Can be mounted on CNC lathes, allowing the integration of cutting and rolling processes into a single CNC lathe. - Has a wealth of experience in processing large screws ranging from a minimum of M2.6 to a maximum of M138. - Has a proven track record in the production of trapezoidal screws and screws with special shapes. - Can also provide closing devices. ■ Advantages of Rolled Screws 1. Improved screw strength Strength is enhanced due to work hardening from plastic deformation and densification of the structure. 2. Improved surface roughness The surface is varnished and has a glossy finish. 3. Reduced processing time High-speed pitch feeding allows for relatively short processing times for finishing in one go. 4. Reduced setup time The lifespan of rolls is generally longer compared to cutting, which reduces the frequency of tool changes. 5. Prevention of burrs, cracks, and rust The structure becomes stronger due to plastic deformation, significantly reducing the defect rate.

• Other machine elements

We handle "Multi-Deck Warring." "Multi-Deck Warring" is a threading system that uses multiple inserts. The inserts are arranged inside a ring and cut while rotating at high speed in an eccentric state relative to the workpiece, designed for each machine's tool holder. We propose suitable inserts tailored to the specifications of the machining machine and the processing content. 【Features】 ■ Increased productivity ■ Up to 50% reduction in processing time ■ Excellent finish in one pass ■ Easy tool change ■ Suitable for machining long screws *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• Other cutting tools

The roller box is a tool that has been used for external rough machining on 6-axis automatic lathes for a long time. There is a roller on the opposite side of the insert, which has a mechanism to prevent the workpiece from escaping during machining. The upper roller is designed to smooth the surface finish after cutting, similar to a vanishing mechanism. It is utilized for rough machining of workpieces with long protrusions, improving the efficiency of rough machining with large allowances. *For more details, please refer to the PDF document or feel free to contact us.*

• Other machine elements
• Other work tools

Gripex is used to pull materials from the chuck using coolant pressure and to transport finished workpieces. Its patented unique mechanism is characterized by a strong gripping force at low coolant pressure. **Advantages of Gripex** - Easy setup – No need to adjust for workpiece diameter as long as it is within the compatible range. - Compact and lightweight – Its small size minimizes interference, so there is no need to change the position of adjacent turret tools. - Powerful – It withstands pressures of 20 bar without the need for an additional pressure relief valve. - Gripex does not require high pressure. - Operates from 0.5 bar. (Refer to the diagram on page 9 of the catalog) - Can clamp at a very short position, very close to the chuck. - Clamps hex bars without requiring spindle orientation. - Can be used similarly to a pickup unit with robot jaws. *For more details, please refer to the PDF materials or feel free to contact us.*

• Other machine elements

The "MEX turn SYSTEM" is a tooling system that maximizes the potential of NC lathes. By utilizing a hydraulic hydro chuck, it reduces micro-vibrations that occur during machining, allowing for a synergistic effect on surface roughness and tool longevity. Additionally, by using the MEXHOLDER (eccentric sleeve), it simplifies the precise height adjustment on the machine, significantly reducing setup time. 【Features】 ■ Significant improvement in surface roughness, tool life, and setup time ■ Synergistic effect on surface roughness and tool longevity ■ Simplified precise height adjustment ■ Significant reduction in setup time *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• lathe

Optimization of small diameter hard turning processing from φ0.65 with small diameter hole machining tools - Intern Numerous achievements in the production of CBN tools and carbide tools under φ2. We also accept orders for special shapes and process consolidation tools. 【Features】 ■ Can be used with holders from φ2 to φ8 ■ Uses selected carbide with excellent wear resistance and capable of machining stainless steel ■ Has a proven track record of producing boring bars as small as φ0.50 ■ Also offers a hydro clamp system that can be directly attached *For more details, please refer to the PDF document or feel free to contact us.

• lathe
• Other machine elements

This document presents the machining results of the internal diameter processing tool "IN turn." For chromium-molybdenum steel equivalent to 16 MnCrS5, a φ4.5 internal diameter machining was performed using a carbide HM120C boring bar (IN6.035.105.015HM120C). The tool life achieved was 2.3 times that of competing products. [Case Studies] ■ For SUM22 equivalent, φ3.2 internal diameter machining Carbide HM120C boring bar (IN6.060.090.015HM120C) was used. ■ For chromium-molybdenum steel equivalent to 16 MnCrS5, φ4.5 internal diameter machining Carbide HM120C boring bar (IN6.035.105.015HM120C) was used. ■ For SUS434 equivalent, φ6.95 internal diameter machining Carbide HM120C boring bar (IN6.055.165.020HM120C) was used. *For more details, please refer to the PDF document or feel free to contact us.

• lathe
• Other machine elements

Our company offers the strong alkaline ion water utilization system "Alcool." "Alcool" is a system for improving factory environments and reducing costs through the use of strong alkaline ion water generated by the strong alkaline ion water generator "ALC-NEWS." By using the generator to perform electrolysis on tap water, we produce strong alkaline ion water. 【Features of Strong Alkaline Ion Water】 ■ Excellent cleaning power ■ Less environmental impact compared to detergents ■ Deodorizing and antibacterial effects *For more details, please refer to the PDF materials or feel free to contact us.

• Other machine elements
• Other production management systems

We propose grinding processing using strong alkaline ion water. By using strong alkaline ion water with a pH of 12.5 in flat grinding machines, cylindrical grinding machines, and NC lathes, we can suppress the growth of bacteria in water-soluble coolants. Additionally, due to its high cleaning effect, it reduces the likelihood of grinding wheel clogging and minimizes the adherence of dirt inside the processing machines. This is recommended for those facing challenges in grinding processing and looking for improvements, as well as for those who are open to introducing new technologies. 【Features】 ■ Suppresses the growth of bacteria in water-soluble coolants ■ High cleaning effect ■ Reduces the likelihood of grinding wheel clogging ■ Minimizes the adherence of dirt inside processing machines *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• Other production management systems

This document is a catalog summarizing the main high-tech tool holders for the Nakamura-Tome Precision Industry "WT-150 size 80mm width turret." High-quality and high-rigidity tool holders enhance the machining efficiency and precision of CNC multi-tasking lathes. It includes testimonials from customers who have adopted high-tech tool holders and introduces the tool holder lineup for the Nakamura-Tome WY-150. [Contents (excerpt)] ■ We asked high-tech users! ■ Features of the bearings ■ Standard holder lineup for WT-150 (1) ■ Standard holder lineup for WT-150 (2) ■ Standard holder lineup for WT-150 (3), etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

This document is a catalog summarizing the main high-tech tool holders for the "WT-100" manufactured by Nakamura-Tome Precision Industry. High-quality and high-rigidity tool holders achieve improved machining efficiency and accuracy for CNC multi-tasking lathes. We will introduce customer feedback from those who have adopted high-tech tool holders, as well as the lineup of tool holders for the WT-100 from Nakamura-Tome Precision Industry. [Contents (excerpt)] ■ We asked high-tech users! ■ Features of the bearings ■ Standard holder lineup for WT-100 (1) ■ Standard holder lineup for WT-100 (2) ■ Standard holder lineup for WT-100 (3), etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

This document is a catalog summarizing the main high-tech tool holders for the Citizen Machinery models "BNJ42S/SY6 and BNJ51S/SY6." High-quality and high-rigidity tool holders enhance the machining efficiency and improve the machining accuracy of CNC multi-tasking lathes. We will introduce feedback from customers who have adopted high-tech tool holders, as well as the lineup of tool holders for the Citizen Machinery BNJ42S/SY6 and BNJ51S/SY6. [Contents (excerpt)] ■ We asked high-tech users! ■ Features of the bearings ■ BNJ42S/SY6 and BNJ51S/SY6 standard holder lineup (1) ■ BNJ42S/SY6 and BNJ51S/SY6 standard holder lineup (2) ■ BNJ42S/SY6 and BNJ51S/SY6 standard holder lineup (3), etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

This document is a catalog summarizing the main high-tech tool holders for the DMG Mori Seiki "NL/NLX1500." High-quality and high-rigidity tool holders enhance machining efficiency and improve machining accuracy for CNC multi-tasking lathes. It includes testimonials from customers who have adopted high-tech tool holders, as well as the lineup of tool holders for the DMG Mori Seiki NL/NLX1500-4000. [Contents (excerpt)] ■ We asked high-tech users! ■ Features of bearings ■ Standard holder lineup for NL/NLX1500 (1) ■ Standard holder lineup for NL/NLX1500 (2) ■ Standard holder lineup for NL/NLX1500 (3), etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

This document is a catalog summarizing the main high-tech tool holders suitable for the Okuma "LB3000." High-quality and high-rigidity tool holders enhance the machining efficiency and accuracy of CNC multi-tasking lathes. It includes testimonials from customers who have adopted high-tech tool holders, as well as the lineup of tool holders for the Okuma LB3000EX. [Contents] ■ Feedback from high-tech users! ■ Features of the bearings ■ Standard holder lineup for LB3000EX (1) ■ Standard holder lineup for LB3000EX (2) ■ Standard holder lineup for LB3000EX (3) ■ Standard holder lineup for LB3000EX (4) ■ Standard holder lineup for LB3000EX (5) *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The 【Hand Jet EBS-260】 is a handheld inkjet marker (printer) developed by the German company EBS. An inkjet marker is a marking device that prints by spraying ink. ○ Features It can quickly and cleanly print on materials that easily absorb ink, such as metal, vinyl, plastic, cardboard, wood, fabric, and concrete. With the "Marking Guide Laser" equipped, positioning the print area is easy. Anyone can achieve the same quality of printing. ○ Basic Operation Data inputted on a computer can be transferred to the main unit via Bluetooth or Wi-Fi, allowing for easy and quick printing by moving the tool while pressing it against the workpiece. The automatic data transfer function from a barcode reader, which was previously an option in conventional models, and the automatic transfer function for Excel data are now standard features, enabling operations tailored to the line configuration used. Additionally, the built-in 3.5-inch color touch panel allows for setting print content and parameters, making it usable even in environments without a PC at hand.

• Other markings
• Printer

The 【Hand Jet EBS250】 is a handheld inkjet marker developed by the German company EBS. An inkjet marker is a marking device that prints by spraying ink. ○ Features It can quickly and cleanly print on various metals. It produces the same quality of printing regardless of who operates it. ○ Basic Operation Data inputted on a computer can be transferred to the device via Bluetooth, allowing for easy and quick printing by moving the tool while pressing it against the workpiece.

• Other markings
• others

We handle the Heimatec CNC lathe tool holder, "Heimatec Capt." The "Heimatec Capt" contributes to improving setup and tool change times for lathes and machining centers. By using this product, you can install not only standard tools of the Capt system but also a wide variety of special tools designed for machine optimization. 【Features】 ■ Easy and quick to handle ■ High precision and versatility ■ Compatible with a wide range of attachments ■ Reduces setup time ■ Supports internal lubrication *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• lathe

We handle the "Sky Diving Unit for Turning Centers" from Haimatec. The tools in the "Haimatec Sky Diving Series" feature an angular adjustment function of ±45°, accommodating a wide range of products. The angular angle can be adjusted continuously. Additionally, various tool connection methods are available, including the standard collet system, the unique u-tec change system, a hydraulic clamping system, and universal arbor connections. 【Features】 ■ High precision and high rigidity ■ Diverse tool connection methods ■ Adjustable ±45° ■ Compatible with internal and external lubrication ■ Supports internal gears/external gears, straight gears/helical gears *For more details, please refer to the PDF materials or feel free to contact us.

• Other machine elements

This is a unit for converting an ER collet holder to a hydro clamp system. It can be easily used by simply removing the existing ER nut and collet and replacing them. There is also an adjustment mechanism, making it easy to adjust for runout. If the inner diameter of the unit differs from the shank diameter of the tool, a reduction sleeve (sold separately) can be used to accommodate this.

• Chuck
• others

The tool can be quickly and easily secured by tightening just one screw. Since the tool is firmly held by a surface rather than a point, an improvement in tool life can be expected. The hydraulic clamping method has the effect of absorbing and suppressing vibrations, contributing to improvements in surface finish and enhancing your productivity.

• others
• Chuck

This document contains information related to Dr. Beier's paper on the development and design of high-speed deburring tools (HSD). It introduces topics such as "the fundamental issues of deburring," "conventional technologies," and "experimental results of directly controllable deburring tools." [Contents (excerpt)] ■ Fundamental issues of deburring ■ Conventional technologies ■ Concept of directly controllable cutting edges ■ Experimental results of directly controllable deburring tools ■ Comparison of experimental results of directly controllable deburring tools with conventional deburring tools ■ Summary *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The GND grooving/cutting system from MAS Corporation was developed based on the requests of users who actually use the Sumitomo Electric Hardmetal grooving chip GND type (for external diameter processing). By simply swapping the holder and connecting the coolant hose, you can process the GND type insert with internal lubrication specifications.

• Plastic processing machines (cutting and rolling)
• lathe

It has the function of smoothing the surface condition after cutting, like vanishing. The roller box has been used as a tool for external diameter rough machining on 6-axis automatic lathes for a long time.

• Other processing machines

MAS Corporation is a group of experts that has been involved in cutting processing in Leonberg, Germany, for over 30 years. They have analyzed and verified various challenges that arise on-site from all angles and have worked on optimizing processes. The GND insert holder is a solution developed by MAS Corporation in response to requests from users of GND inserts manufactured by Sumitomo Electric Hardmetal. It aims to simultaneously improve chip management and the cooling of cutting edges.

• others
• Chuck