TAKACHI ELECTRONICS ENCLOSURE CO., LTD. List of Products and Services

6 new sizes added for a total of 14 different sizes available for selection. Small rounded design plastic case ideal for use as IoT devices. Easily attached to, or detached from the wall by using the wall mounting bracket. Made of weather-resistant ASA material. Suitable for devices intended to be used under direct sunlight. Optional universal PCB, PCB32-53 is compatible with SIM5-7-2 and 5-7-3 models. See PCB series on our website for more details.

8 new sizes added for a total of 19 different sizes available for selection. Small rounded plastic case ideal for use as IoT devices. Easy assembly snap-fit construction. Despite the small size, the screwless construction provides ample internal space. Off-white models are made of weather-resistant ASA material. Suitable for devices intended to be used under direct sunlight. Optional universal PCB, PCB32-53 is compatible with SIC5-7-2 and 5-7-3 models. See PCB series on our website for more details.

Unique seamless construction and rainproof outdoor network box. Although it is IP44, it can completely protect the internal components against rain when installed vertically. ASA material is resistant to deterioration and discoloration from ultraviolet rays. Perfect for use as outdoor communication devices. Bracket integrated in the backside equipped with the slits allows for pole mounting belt to be passed through the slit for pole mounting, while the hanging holes enable it to be secured onto wall hooks or brackets. Tray comes with knock-out holes for wiring. Knock-out holes can easily be punched out through with a plier or a nipper. Available in 3 sizes.

Desktop-type sloped enclosure designed based on ergonomic angles and design. High waterproof protection class of IP67. 【What is IP67?】 It can be submerged in water at a depth of 1 meter for 30 minutes without any water ingress. The sides feature an easy-to-hold streamlined design, making it usable as a handheld device. Available in 6 sizes and 2 colors.

Network plastic box attached with shockproof silicone corner guards. Suitable for industrial tablet, measuring equipment, controller, and various other applications. A total of 6 color combinations available with 3 corner guard colors - dark gray, emerald, indigo - and 2 plastic box colors - dark gray and off-white.

Slim design small handheld enclosure. Selectable in battery compartment types or without battery compartment types. Easy replacement of batteries. Battery contact included in each case (except for N type). Select proper models by enclosure dimensions and capacity of the batteries. Nominal capacity CR2032: 225mAh CR2450: 620mAh CR2477: 1000mAh Battery contact included in each case. (With battery compartment types only.) Suitable for remote controller, wireless key fob, or small tester/device, and more. Available in 4 sizes in 2 different color types (black or white).

This is a pocket-sized case with a simple design and a silicone cover. The cover is elastic and non-slip, protecting the device from impacts such as drops. Type with a coin battery storage space allows for easy battery replacement. Please solder the included battery terminal to the circuit board for use. You can choose from the following coin battery types: CR2032×1, CR2032×2, CR2450×1, CR2477×1. 【Nominal battery capacity】 CR2032: 225mAh CR2450: 620mAh CR2477: 1000mAh It can be used for remote controls, small wireless devices, simple measuring instruments, RFID tags, small GPS devices, sensor equipment terminals, IoT network equipment terminals, and more. There is a strap attachment hole on the side, allowing you to attach the optional STPS series strap. Size: 4 sizes Colors Case body: white / similar to Munsell N9.5; black / similar to Munsell N1 Silicone cover: orange, green, cyan, light gray, black, enabling a total of 10 color combinations

Low cost and simple, snap-in cover structure case. Comfortable shape and hold. 4 different sizes and 5 different colors are available for selection. Suitable for use as a wireless device, remote control, key fob etc. Designed with an easily accessible hole for strap attachment. Protection class: IP40 Operating temperature: -10℃～+60℃ P color type has been scheduled to be discontinued and will no longer be available once current inventory has depleted. Please take this into your consideration when selecting color type.

Waterproof portable plastic case made of double shot injection molded TPE grip and ABS body. IP67 waterproof and does not allow water to enter even if dropped into water. TPE side grip provides not only a comfortable grip, but also protects from drop impact. Suitable to be used as a remote controller, wireless network device, IoT sensor, GPS, RFID tag, and more. Available in 6 different sizes and 4 different compartment types : CR2450/CR2477x1, CR2032x1, AAAx2, and no battery compartment type. Battery contacts are included with the CR2032 type. CR2032 battery contacts can be used by mounting them on the PCB.

IP67 waterproof handheld enclosure. Can be used for measuring instruments, communication devices, and controllers in outdoor or harsh factory environments. It has a high level of waterproofing that can withstand being submerged in water at a depth of 1 meter for 30 minutes without any water ingress. The battery structure allows for options of 2, 3, 4, or 6 AA batteries, as well as 2, 3, or 4 AAA batteries, or no batteries at all. Side grip is easy to hold and protects against impacts from drops and other impacts. 9 sizes and 10 color options available.

Handheld case with a shock-resistant design and a silicone cover. Main case is available in a total of 7 sizes. 2 colors available: off-white (similar to Munsell N8.75) and dark gray (similar to Munsell N3) There are types available with and without a battery box, and the battery configurations include 2 AA, 3 AA, 4 AA, 2 AAA, 3 AAA, 4 AAA, 6 AAA, and 006P (9V) batteries, totaling 8 options. Silicone cover is available in 4 colors: dark gray, navy blue, green, and orange.

Easy-to-hold handheld enclosure with silicone cover. There are types with and without a battery box, and the battery configurations available are: 2 AA, 3 AA, 4 AA, 2 AAA, 3 AAA, 4 AAA, 6 AAA, and 006P (9V), totaling 8 options. The case comes in 8 sizes, and available in 2 colors: off-white (similar to Munsell N8.75) and dark gray (similar to Munsell N3). The silicone cover is available in 5 colors: dark gray, light gray, blue, green, and red.

The most popular handheld plastic enclosure in Japan. Designed with beveled edges and rounded corners, and manufactured from flame-retardant ABS UL94V-0 material. Available in 9 different compartment types: AAx2, AAx3, AAx4, AAAx2, AAAx3, AAAx4, AAAx6, 9Vx1, and no battery compartment type. Positive (+) / negative (-) pole mark are incused within each battery compartment. Recommended to be used as measuring instruments, testing devices, wireless communication gadgets, medical equipment, and more.

High waterproof box for outdoor use made of ASA resin, resistant to discoloration and degradation from ultraviolet rays, with waterproof protection class of IP68 / IP67. Can be easily wall-mounted by simply removing the blind cover. Can be attached to poles or utility poles with an optional mount bracket. Waterproof protection class: IP68 (waterproof for 24 hours at a depth of 1 meter without water ingress) - 22 sizes IP67 (waterproof for 30 minutes at a depth of 1 meter without water ingress) - 2 sizes Product lineup: 24 sizes

Flat design plastic case. It has a panel structure, making it easy to process. Lineup 41 sizes in total, available in off-white and dark gray.

This is a shielded case with conductive paint, DOTITE (a paint mixed with nickel filler), applied to the inside of a plastic case. [The following two series are available for selection] The PFE series, with a flat design, is ideal for network communication devices, desktop measuring instruments, controllers, etc. Available in 4 sizes. The LCE series, in handheld size, is perfect for portable measuring instruments, handheld controllers, medical devices, etc. Available in 5 sizes.

PF plastic case with wall mounting flange bottom design. Made of flame-resistant ABS UL94V-0 and available in off-white color. Flat designed plastic case with detachable panels. Total of 30 different sizes available for selection.

IP65 switch box with 1 ~ 4 Φ22 hole(s) on the top cover. Made from flame retardant UL94V-0 high heat resistant polycarbonate material. Φ22 knock-outs on 2 opposite ends for easy wiring access if required. Exclusive cable gland, B131210G for Φ22 knock-outs is available as optional parts. IP65 protection class is maintained with waterproof switches and the exclusive cable glands installed. Yellow/Black color types available as BTO (built-to-order) at a MOQ of 500 pcs. For custom color order, the material would be changed to ABS UL94HB, with an operating temperature of -10°C ~ +60°C. 4 different sizes available.

Curved transparent acrylic case with corner support columns. Usable as a display enclosure for a unique and luxurious outlook. Robust structure by acrylic panels and extruded aluminium pillars. Knurled thumb screws for easy hand assembly. Possible to be used in a flat layout, or a standing layout. 5 different sizes are available. 【Conventional Acrylic Cases】 - The shape is rectangular. - Prone to breaking. - Most have a structure where the cover simply sits on top. - Custom orders take time for estimates and production lead times. 【SKL Series】 - Soft curved design. - Uses aluminum pillars at the corners for high strength. - The cover can be securely fixed with knurled screws, making it easy to attach and detach. - Custom sizes and custom processing can be shipped within 7 days after order. - The cost for custom sizes is clearly defined in the price list by size. Custom sizes can be specified freely in 1mm increments for width (W) and depth (D) from 50 to 500mm, and height (H) from 30 to 500mm. The lead time is short, with shipping on the 7th day after order confirmation.

Transparent acrylic box with corner support frames and elastomer corner guards. Extruded aluminium corner frames enables the structure to be rigid when screwed. Perfect to be used as a display case to showcase a product’s internal components at trade shows or demonstration events, or as a touch screen monitor box. Can be manufactured in a wide range of dimensions. Adjustable sizes available in 1mm intervals, with W and D dimensions from 55 ~ 500mm, and H dimensions from 30 ~ 500mm. Elastomer corner guards are impact resistant and function as anti-slip rubber feet. Black (similar to RAL7021) or Gray (similar to RAL7043) color can be selected.

Transparent acrylic case with corner support frames. Extruded aluminium corner frames enables the structure to be rigid when screwed. Perfect to be used as a display case to showcase a product’s internal components at trade shows or demonstration events, or as a touch screen monitor box. Can be manufactured in a wide range of dimensions. Adjustable sizes available in 1mm intervals, with W and D dimensions from 50 ~ 500mm, and H dimensions from 30 ~ 500mm. Rubber feet can be provided if required in S (Φ11.2mm) or L (Φ15.7mm) Available with short lead time of 7 days after the receipt of order. Products customized with holes for connectors and switches can also be shipped in 7 days. Prices are predetermined for each size - please refer to the PDF catalog for further information.

This is a low-cost transparent plastic case made of styrene. Available in 8 sizes.

Curved transparent acrylic case with corner support columns, exclusively for use with Raspberry Pi 4B models. Usable as a display enclosure for a unique and luxurious outlook. 3 models are available: Standard, Layered, and Flanged. Flanged RPA-4B-1F model is compliant with VESA100 (100x100) mounting standards, therefore can be attached onto the backside of display monitors, among others. Screws and standoffs to install Raspberry Pi Board are included. *Raspberry Pi Board is not included. 【Three selectable types】 RPA-4B-1: Single board type RPA-4B-2: Dual-layer motherboard type RPA-4B-3: Wall-mounted type (VESA mount type) *The VESA mount type features mounting holes with a pitch compatible with PC displays (75x75mm/100x100mm). It can be mounted on the back of a PC display or on a wall.

DIN Rail mountable Raspberry Pi 4B enclosure. Exclusively for use with 35mm DIN Rail. Able to assemble easily with a flathead screw driver; no screws required. Flat shape type and transparent window type are available. *Caution : Material may easily break when assembling. *Raspberry Pi Board is not included.

This is a DIN Rail mount plastic box exclusively for use with Raspberry Pi. Compatible with Raspberry Pi 2B / 3B / 3B+. Selectable from a flat type and a type with a transparent window. Can be directly mounted on a DIN Rail, allowing for easy installation of the Raspberry Pi in control panels or plastic boxes. TAKACHI also offers printing of original designs with an inkjet printer - realizing your one and only Raspberry Pi enclosure.

A stylish attaché case design waterproof case in the style of a Pelican case. Available in a total of 22 sizes, including portable, trunk case, and carrying case types with pull handles. It can be widely used for outdoor sports and industrial applications. 【Features】 - Made of lightweight and high-strength reinforced PP plastic. - Waterproof and dustproof with IP65 protection class (prevents dust from entering and withstands water spray from all directions for more than 3 minutes at a rate of 12.5 liters per minute). - Equipped with an air-permeable, water-impermeable internal pressure adjustment valve to prevent the case from opening due to changes in air pressure and to avoid moisture ingress caused by temperature fluctuations. - Optional interior sponge foam and dividers are available. 【Applications】 - Portable measuring instruments, handheld measuring devices - Medical equipment - Outdoor power supplies, portable power sources - Portable communication devices, outdoor radio equipment - Storage for electric tools, special tools, and precision instruments - Storage for cameras, filming equipment, broadcasting equipment, and drones - Marine sports and outdoor leisure - Travel and air transport trunk cases - Storage for musical instruments such as electric guitars - Storage for defense equipment and police equipment

Durable and stylishly designed waterproof protector lockable case. Equipped with a TSA lock latch for security, or transportation as check-in baggage. Optional aluminium panel can turn the NKK series into your own original controller, measuring device, or portable power supply.

【Tool Case XTRA Series】 ■ A carrying-type tool case with a stylish appearance featuring a curved handle design. ■ By adding optional internal sponge foam, it is possible to enhance the protective function for stored equipment. ■ Ideal for storing medical devices, pharmaceuticals, measuring instruments, tools, precision parts, and test samples. ■ Available in 4 sizes and 2 colors: black and light gray. (Models 403810 and 494614 are available in black only.) Material: PP (Polypropylene) plastic 【Size (external dimensions) & Standard Price】 Sales Unit: 1 unit～ L258 × W246 × H49 mm / ￥3,220 L320 × W308 × H81 mm / ￥4,190 L397 × W308 × H96 mm / ￥5,820　　 L486 × W460 × H136 mm / ￥12,370

Easy to use! Low-cost tool case! 【Size (external dimensions)・Standard Price】 L230 × W187 × H45mm 　￥1,790 L265 × W225 × H50mm 　￥2,010 L327 × W275 × H55mm 　￥2,910

This is a versatile carrying case that opens and closes easily with a snap-in latch. A wide range of 17 sizes is available, from L25.4×W23×H7.2cm to L45.2×W38.3×H20.0cm. By adding optional internal foam, you can enhance the protective function for stored equipment. Ideal for storing tools, precision parts, measuring instruments, test samples, medical devices, and more.

IP68 high performance polycarbonate box that can withstand submersion at a depth of 2 meters for up to 24 hours. 2 new sizes added for a total of 6 different sizes available for selection. High durability achieved through material thickness and stainless steel latch. Built-in bosses on both the top cover and base allow for the functional usage of components such as displays and circuit boards when attached.

IP65 hinged polycarbonate enclosure equipped with key lock latch. Made of light gray UL94V-0 polycarbonate, which has good heat resistance properties. Lockable enclosure best used for tamper prevention in FA, control box, and network communication fields. 【Line-up】 Light gray cover types : 50 different sizes Transparent cover types : 46 different sizes (BTO in extra lead time of 2 months) ***Transparent top cover type (T type) requires 2 months delivery time due to BTO (built-to-order) ***

Waterproof box with an IP65 waterproof and dustproof protection rating. It is a maintenance-friendly plastic box with an opening and closing design, suitable for various fields such as electrical construction, communication equipment, and FA/control. Available in a wide range of 50 sizes, with covers in white gray and transparent options. You can choose between the cost-effective ABS resin BCAP series and the high-strength, flame-retardant UL94V-0 polycarbonate BCPC series.

Waterproof polycarbonate enclosure for superior impact resistance. Available in 28 different sizes, with 2 different cover types (white gray and transparent). Suitable to be used as controller, junction box, network devices, outdoor measuring instrument and more.

Low-cost waterproof pull box, BCAS series, is a highly waterproof plastic box available at a low price. 【Features】 ○ A wide variety of 39 sizes ○ Versatile plastic boxes suitable for various fields - FA and control - Electrical construction - Wiring pull boxes - Terminal relay boxes - Switch boxes For more details, please contact us or download the catalog.

Universal plastic enclosure with screw fastening. 26 sizes are available in 2 colors; Black (ABS UL94HB) and Off-white (ABS UL94V-0).

Low cost, general purpose small plastic project box. No screws required; simple snap-in cover. Exclusive PCB (TNF series) is available. Please use it for small-lot device production, prototyping, or electronic projects. 17 sizes, 3 different material types (standard, flame-resistant, and heat-resistant) are available. 【Product Lineup】 Standard ABS resin type: 17 sizes available in two colors, light gray (similar to Munsell 5Y8/0.5) and black (similar to color Munsell N1) Flame-retardant ABS resin type: 4 sizes available in gray (similar to Munsell 5GY7/0.5) Heat-resistant ABS resin type: 5 sizes available in black (similar to Munsell N1)

Double-sided adhesive tape allows the standoff to be mounted quickly and easily; allows PCB mounting in non-boss enclosures. Excellent strength for securing screws due to the internal steel nut. Convenient for installing PCBs into enclosures without the need for customization. Please ensure that surface is cleaned and grease-free before adhering. Once removed, it cannot adhered on again.

Plated Through Holes (PTH) type universal PCB with a 2.54mm hole-to-hole pitch. Inexpensive and economical PCB made using robust, heat-resistant and non-conductive glass epoxy. Easily mounted onto bosses or standoffs via the mounting holes at each corner. Environmentally friendly lead-free solder. RoHS3 compliant. 5 different sizes available, with PCB100-160 being of Eurocard (3U) format size.

Universal board that uses lead-free solder, taking environmental measures into consideration. Available at a low price and can be selected from a total of 25 sizes. The material used is glass epoxy (FR-4) t1.6, featuring double-sided through holes at 2.5mm pitch. Lineup include sizes that fit perfectly in the SW, SS, SY, and TW series plastic cases.

TAKACHI produces overlay sheets with embossed buttons with significantly low initial costs. 【Reasons behind low initial costs】 - Using a CNC embossing machine eliminates the need for pressing dies to apply embossing (buttons) - Printing is done with inkjet printing, therefore print plates are not required - Both sheet and double-sided tape are cut with a CNC cutting plotter, eliminating the need for a cutting die With the new production method, which introduces the CNC embossing machine, lead time and costs have been reduced dramatically. - Production possible from just one sheet - Perfect for making prototypes and high-mix low-volume production - Embossing can be performed even in the development phase - We also welcome orders for overlay sheets only (New method) Sheet production lead time using CNC embossing machine New orders: 8 working days Repeated orders: 6 working days (Conventional method) Sheet production lead time using embossing dies New orders: 15 working days Repeated orders: 6 working days With unprecedented flexibility, we will support your speedy product development.

TAKACHI offers inkjet printing for cases and boxes with low initial costs, starting from just one piece and with short lead time. 【Reason for Low Initial Cost】 Because the printing is performed using data, there are no plate costs for silk screen printing! 【Lead Time】 Inkjet printing only: Shipped after 3 working days after order confirmation Hole milling + inkjet printing: Shipped after 8 working days after order confirmation

Takachi Electric Industry offers additional processing of aluminum cases and aluminum boxes, as well as cutting processing of aluminum plates, starting from just one piece with a short delivery time! With our German-made high-speed machining center, which is unique to our company in Japan, we achieve high-quality processing with a short lead time. Additionally, we have an inkjet printer capable of printing on plastic materials, allowing us to provide processing and printing as a combined service.

P68 high performance plastic enclosure protected from immersion as long as 24 hours at 1m depth. Perfect for use as outdoor communication or network devices. With a silicone waterproof gasket, and supported by multiple enclosing screws from the rear side, it allows the enclosure to maintain a stable high waterproofing capability. Self-tapping captive screws which are able to lock into a pre-drilled hole and provide a secure hold for fastening the cover. Please drive the self-tapping captive screws for cutting a thread into the holes at first so that the cover and body can be secured together properly. Available in 16 different sizes and selectable from standard WG series, which the material is ASA, and WGPC series, which offers high heat and flame resistance and the materials are PC+ASA.

Plastic enclosure with mount bracket for 35mm DIN Rail. 3 new sizes added for a total of 4 different sizes available for selection. Toolless snap-in structure allows for quick and easy assembly. Simple installation and removal on a DIN Rail with the pull lever. Suitable for network module, controller, data logger and more.