TAKACHI ELECTRONICS ENCLOSURE CO., LTD. List of Products and Services

Hinged structure allows easy access for maintenance or replacement of components. 2, 3 and 4 way types are available. A screw type wiring connection is adopted; allowing for easy installation and removal. 4P pole models and no terminal models are available. 【Features】 Protection class: IP68 (24 hours at 1m depth) Operating temperature: -25°C to +60°C Cover tightening torque: 0.5 to 0.6N・m

Integrated junction box consisting of cable glands and a terminal block. Suitable for industrial facilities, power cable joints, relay between motors and/or sensors. IP65 protection class with high oil resistant PBT material. 3, 4, and 6 pole types are available. Φ5.0 and Φ7.4 rubber cable bushes (2 pcs each) are included. Φ5.0 bush : Cable range Φ4～5mm Φ7.4 bush : Cable range Φ6～7mm

Compact size junction box ideal for power lines and sensor relay. Waterproof with IP65 protection class. Lower price compared to other products. TMB-4P, 6P, and 10P come with a Φ21 knockout. When making a hole, place a flathead screwdriver against it and strike it firmly with a hammer or similar tool. For waterproofing the knockout hole, please use the separately sold M20 size cable gland. A wide range of optional parts available!

The diecast aluminum terminal box is a terminal junction box suitable for use in harsh environments where heat and oil resistance are required, which are difficult to achieve with standard plastic terminal boxes. 【Features】 - Excellent waterproof performance with protection rating IP65 - Superior heat dissipation, heat resistance, and oil resistance due to aluminum die-casting - Available in six types with terminal counts of 6P, 9P, 15P, 20P, 20P (10P×2 rows), and 30P (15P×2 rows) - Five sizes ranging from 80×75×57.5mm to 120×220×80mm For more details, please contact us or download the catalog.

IP68 high performance plastic box protected from immersion as long as 24 hours at 1m depth. PC/ASA material provides superior heat resistance and flame retardancy. Perfect for use as outdoor communication or network devices. Self-tapping captive screws which are able to lock into a pre-drilled hole and provide a secure hold for fastening the cover. Please drive the self-tapping captive screws for cutting a thread into the holes at first so that the cover and body can be secured together properly.

P68 high performance plastic enclosure protected from immersion as long as 24 hours at 1m depth. Perfect for use as outdoor communication or network devices. With a silicone waterproof gasket, and supported by multiple enclosing screws from the rear side, it allows the enclosure to maintain a stable high waterproofing capability. Self-tapping captive screws which are able to lock into a pre-drilled hole and provide a secure hold for fastening the cover. Please drive the self-tapping captive screws for cutting a thread into the holes at first so that the cover and body can be secured together properly. Available in 16 different sizes and selectable from standard WG series, which the material is ASA, and WGPC series, which offers high heat and flame resistance and the materials are PC+ASA.

Waterproof junction box with a cable gland and body in a single structure. It has a protection class of IP68, with waterproof performance at 0.5 bar for 3 hours (equivalent to depth of 5 meters for 3 hours). Both 3-way and 4-way types are available. The terminal block is removable, and the connection method is screw-type, making it easy to work with. The terminal section can be selected from 7 types: without terminal block, 3P, 5P, 8P, 3WP, 4WP, and 3LP. By using optional rubber bushings, it can accommodate cables of various diameters.

IP68 Y-shaped relay connector for branching of cables. A screw type wiring connection is adopted, allowing for easy installation and removal. 3P, 6P and 3WP pole terminal models and no terminal model are available. Possible to adopt wide cable range with the optional sealing insert. Applicable cable size range can be expanded by removing the inner sealing insert.

This is a highly waterproof connector equivalent to IP68 3bar/2h (30m depth for 2 hours). The terminal section has 4P×4, and each is common. The wiring method is screw-type, making it easy to work with.

IP67 waterproof polycarbonate enclosure with knockouts. Molded with metric knock-outs for easy removal for cable entry. Tough polycarbonate material for superior impact resistance. Suitable to be used as terminal junction box, control box, wireless network devices and more. Mountable on walls by using the cover holes for fastening. Available in 28 different sizes, with 2 different cover types (white gray and transparent). *Optional terminal block STB series can be easily attached to SPCM series.

IP65 switch box with 1 ~ 4 Φ22 hole(s) on the top cover. Made from flame retardant UL94V-0 high heat resistant polycarbonate material. Φ22 knock-outs on 2 opposite ends for easy wiring access if required. Exclusive cable gland, B131210G for Φ22 knock-outs is available as optional parts. IP65 protection class is maintained with waterproof switches and the exclusive cable glands installed. Yellow/Black color types available as BTO (built-to-order) at a MOQ of 500 pcs. For custom color order, the material would be changed to ABS UL94HB, with an operating temperature of -10°C ~ +60°C. 4 different sizes available.

Waterproof polycarbonate enclosure for superior impact resistance. Available in 28 different sizes, with 2 different cover types (white gray and transparent). Suitable to be used as controller, junction box, network devices, outdoor measuring instrument and more.

IP64 and IP54 water-resistant see-through hinged inspection window. Smartly designed window for protection of switches and displays, etc. Use in situations where component status, access and maintenance is necessary. Knurled thumb screws for easy securing. Be careful not to get fingers caught on the spring loaded self-closing cover.

Economically priced end stopper bracket for use with 35mm DIN Rail. Can be used to fix terminal blocks or modules. Included screws allow affixing of stopper brackets firmly at a fixed location.

Stopper bracket for use with 35mm DIN Rail to keep an attachment at a fixed location. TKR-TWE1 is used with small DIN Rail attachment parts. For larger / higher attachment parts, TKR35-1 is recommended for providing additional support.

For installation of enclosures, PCB and other parts onto a DIN Rail. Robust metallic material allows rigid mounting on DIN Rails. Simple installation and removal via the pull lever. Load capacity: 10kg [Material] Base, lever: Steel plate Spring: Iron

This is a DIN Rail mounting foot that can be easily removed with one touch. Bulk packaging is available. The conventional model CKD-80 has been discontinued, and DRF80-1 is the replacement product. Load capacity: 1.5kg

Mounting base for installation of enclosures, PCB and other parts onto 35mm DIN Rail. 4 new sizes added for a total of 5 different sizes available for selection. Easy mounting and dismounting from a DIN Rail using the pull lever. Replacement product for the discontinued DRA series.

IP68 2bar/3h (passed waterproofing test equivalent to 3 hours @ 20m depth) Screw type connection enables easy installation. Selectable from 2-pole, 3-pole, or 4-pole models.