TAKACHI ELECTRONICS ENCLOSURE CO., LTD. List of Products and Services

IP68 snap-lock mini connector for easy and frequent connection / disconnection. Easy connection / disconnection through the use of the snap-lock mechanism. 4P and 5P pole models are available. Plug-socket connector type consisting of the plug side (male) and socket side (female). UL2238 / C22.2 No. 182.3 certified products. Screwless connection method; screw, soldering or special tools are not required. Applicable cable size range can be expanded by removing the inner sealing insert.

IP68 snap-lock mini panel-mount connector for easy and frequent connection / disconnection. Easy connection / disconnection through the use of the snap-lock mechanism while installed on panels or enclosures. Screwless terminal block for high-speed connection. 4P and 5P pole models are available. UL2238 / C22.2 No. 182.3 certified products. Plug-socket connector type consisting of the plug side (male) and socket side (female). Screwless connection method; screw, soldering or special tools are not required. Applicable cable size range can be expanded by removing the inner sealing insert.

IP68 snap-lock connector for easy and frequent connection and disconnection. 4P and 5P pole models are available. Plug-socket connector type consisting of the plug side (male) and socket side (female). Screw type connection method; soldering or special tools are not required. Screwdriver flathead tip width of 3mm is recommended. Screws may be screwed in firmly. Use a screwdriver with proper grip handles to loosen it. Applicable cable size range can be expanded by removing the inner sealing insert.

IP68 snap-lock mini panel-mount connector for easy and frequent connection / disconnection. Can be attached / detached while installed on panels or enclosures. 4P and 5P pole models are available. Plug-socket connector type consisting of the plug side (male) and socket side (female). Screw type connection method; soldering or special tools are not required. Screwdriver flathead tip width of 3mm is recommended. Screws may be screwed in firmly. Use a screwdriver with proper grip handles to loosen it. Applicable cable size range can be expanded by removing the inner sealing insert.

IP68 snap-lock micro connector of just 14mm in diameter. Easy connection/disconnection by simply snapping it to lock, and pulling while pressing the tab to release. 2P and 3P pole models are available. Plug-socket connector type consisting of the plug side (male) and socket side (female). Screw type connection method; soldering or special tools are not required. For 2P models, use a flathead (minus) screwdriver of tip width 3mm. For 3P models, use a hexagonal screwdriver (tip width of 0.9mm width across flats). Screws may be screwed in firmly. Use a screwdriver with proper grip handles to loosen it. Applicable cable size range can be expanded by removing the inner sealing insert.

IP68 snap-lock micro panel-mount connector of just 14mm in diameter. Easy connection/disconnection by simply snapping it to lock, and pulling while pressing the tab to release. 2P and 3P pole models are available. Plug-socket connector type consisting of the plug side (male) and socket side (female). Screw type connection method; soldering or special tools are not required. For 2P models, use a flathead (minus) screwdriver of tip width 3mm. For 3P models, use a hexagonal screwdriver (tip width of 0.9mm width across flats). Screws may be screwed in firmly. Use a screwdriver with proper grip handles to loosen it. Applicable cable size range can be expanded by removing the inner sealing insert.

This is a waterproof connector with IP68 rating, capable of withstanding 3 bar for 3 hours (at a depth of 30m). The wiring method is screw-type, making it easy to work with. Number of terminals can be selected from 2P, 3P, 4P, or 5P. The set includes a plug side (male) and a socket side (female). If you only need the plug side or the socket side, please order using the individual part number.

A panel mount connector that can be mounted on panels and enclosures and allows for insertion and removal. Waterproof connector equivalent to IP68 3bar/3h (3 hours@30-meter depth). The wiring method is screw-type, making it easy to work with. The number of terminal poles can be selected from 3P, 4P, or 5P. The plug side (male) and socket side (female) are sold as a set. If you only need the plug side or the socket side, please order using the individual part number.

IP68 2bar/3h (passed waterproofing test equivalent to 3 hours @ 20m depth) Screw type connection enables easy installation. Selectable from 2-pole, 3-pole, or 4-pole models.

Waterproof connector equivalent to IP68 2bar/3h (20m depth for 3 hours) protection class. Wiring method is screw-type, making it easy to work with. 3 types of terminal poles available: 2P, 3P, and 4P.

This is a highly waterproof connector equivalent to IP68 3bar/2h (30m depth for 2 hours). The terminal section has 4P×4, and each is common. The wiring method is screw-type, making it easy to work with.

Waterproof connector with a plug and socket set. Terminal pole numbers can be selected from 6P and 8P. Rated voltage is 400V, rated current is 16A, and compatible cable diameter is Φ7 to 13.5mm. The wiring method is screw-type, making it easy to work with.

IP68 panel-mount plug-type connector for installation on panels or boxes. Plug-socket panel-mount type consisting of the plug side (male) and socket side (female). Screw type connection method; soldering or special tools are not required. 3P, 6P and 8P pole models are available. THB406-3P is UL2238 / C22.2 No. 182.3 compliant product. For safety reasons, please arrange the connector such that the primary side is female (socket side) and the secondary side is male (plug side).

IP68 relay connector with screw type wiring connection for easy installation and removal. 3P, 6P, 2WP and 3WP pole models and no terminal model are available. No terminal model can be used to protect the connector. Possible to adopt wide cable range with the optional sealing insert. Suitable for use as power or sensor signal relay of industrial plant, machining instrument, outdoor LED lighting, underground wiring, marine equipment where waterproofing is required.

IP68 Y-shaped relay connector for branching of cables. A screw type wiring connection is adopted, allowing for easy installation and removal. 3P, 6P and 3WP pole terminal models and no terminal model are available. Possible to adopt wide cable range with the optional sealing insert. Applicable cable size range can be expanded by removing the inner sealing insert.

Hinged structure allows easy access for maintenance or replacement of components. 2, 3 and 4 way types are available. A screw type wiring connection is adopted; allowing for easy installation and removal. 4P pole models and no terminal models are available. 【Features】 Protection class: IP68 (24 hours at 1m depth) Operating temperature: -25°C to +60°C Cover tightening torque: 0.5 to 0.6N・m

Waterproof junction box with a cable gland and body in a single structure. It has a protection class of IP68, with waterproof performance at 0.5 bar for 3 hours (equivalent to depth of 5 meters for 3 hours). Both 3-way and 4-way types are available. The terminal block is removable, and the connection method is screw-type, making it easy to work with. The terminal section can be selected from 7 types: without terminal block, 3P, 5P, 8P, 3WP, 4WP, and 3LP. By using optional rubber bushings, it can accommodate cables of various diameters.

There are various shapes that can accommodate different cable wiring methods, such as straight type, L right angle type, T branching type, Y branching type, and 4 branching type. No soldering or specialized crimping tools are required for wiring. Only a screwdriver is needed, making wiring work on site easy. There are 7 types of terminal poles available, ranging from 3P to 8P.

General-purpose cable gland with a screw section that conforms to the M screw standard. It offers waterproofing with an IP67 protection rating (equivalent to 30 minutes at a depth of 1 meter) and is available at a low price. The screw sizes range from M8 to M63, and it accommodates cable outer diameters from Φ1mm to Φ44mm, offering a total of 17 sizes in a wide lineup. The rubber bush is made of highly oil-resistant NBR rubber. It comes with an O-ring on the seating surface, allowing for waterproofing even when used on uneven wall surfaces to a certain extent.

This is a weather-resistant cable gland made of silicone rubber that is resistant to ultraviolet rays and aging. [Weather resistance] refers to the property of polymer materials such as plastics and paints that makes them less likely to deform, discolor, or deteriorate when used outdoors. It has an IP67 waterproof rating, making it ideal for outdoor use. An O-ring is attached to the base, allowing it to be waterproof even when used on uneven wall surfaces to a certain extent.

High waterproof with IP68 protection class - 0.5 bar/30 min (waterproof for 30 minutes at a depth of 5m). Compared to conventional products, the rubber bush is thicker, providing a larger contact surface with the cable and holding it with uniform force. It demonstrates stable and high waterproof performance even against repeated tightening. Compatible cables range from Φ2.5mm to Φ42mm, with a wide lineup. Available in a total of 15 sizes from M8 to M50.

The spiral section prevents the bending of cables and protects against disconnection. Available in six sizes from M8 to M25. Compatible cable diameters: Φ1mm to Φ16mm. Product no. / Screw size / Cable diameter / Standard price RSP8-2.5 / M8 / Φ1 to Φ2.5 / ￥220 RSP8-4 / M8 / Φ2.5 to Φ4 / ￥220 RSP10-6 / M10 / Φ3 to Φ6 / ￥220 RSP12-6 / M12 / Φ3.5 to Φ6 / ￥220 RSP16-8 / M16 / Φ4 to Φ8 / ￥250 RSP20-11 / M20 / Φ6 to Φ11 / ￥310 RSP25-16 / M25 / Φ11 to Φ16 / ￥430

Multi-hole cable gland with M threads. Multiple cables can be protected with a single cable gland. Up to a maximum of 6 cables can be used with 1 cable gland. 5 thread sizes for M12・M16・M20・M25・M32 are available in light gray and black. Cable range: Φ1.5mm～Φ11mm

High waterproof performance with protection class IP68, 5bar/1h (equivalent to 1 hour at a depth of 50m). 【Lineup】 Sizes: Screw sizes M16 to M25, compatible cable diameters Φ5mm to Φ17mm, Φ6×2 hole type, a total of 5 types Colors: 3 types - light gray/gray, black/gray, black/green

L-shape cable gland with M type threads. Allow wires to be routed vertically. 4 thread sizes for M16・M20・M25・M32 are available. Cable range: Φ5mm～Φ22mm

Torque wrench with interchangeable head. Suitable for the tightening of cable glands requiring a specific torque. Open end interchangeable head (spanner head) TWE series available separately.

A series of cable glands that secure cables and prevent the ingress of water, oil, and dust. In addition to low-cost types, we offer high-performance options such as IP68 (waterproof at a depth of 10m for 30 minutes), high waterproof types, heat-resistant types up to 200°C, and EMC shielded types to meet all customer needs. Low-Cost Waterproof Cable Gland RM Series ■ Plastic M-thread cable gland with protection rating IP67 (waterproof at a depth of 1m for 30 minutes) ■ Compatible with a wide range of cables from Φ2.5mm to Φ42mm ■ Available in 17 sizes from M8 to M63 *If you would like a free sample, please contact us through the "Contact Us" section.

Heat resistant sealing insert made of FPM material. Resistant up to 200℃. Protection class : IP68 1bar / 30min 10m depth immersion for 30 minutes Operating temperature : -40℃ ~ +200℃ Compliant with EN50262 Var. A

Optimal contact spring provides excellent shield contact and the smallest possible transfer impedance. Clawed lock nut makes a good EMC shield contact possible on conductive enclosures. Shape of the contact spring not only allows for a large clamping range to the shield but also enables easy and faster installation and re-installation. 2-piece detachable sealing inserts can be adapted to the wider existing cable diameter on site. (AGE12 available only with 1-piece sealing insert)

This is a high waterproof metal cable gland with a protection rating of IP68, capable of withstanding 1 bar for 30 minutes (30 mins@10m depth). The rubber bush is thick and has a large contact surface with the cable, allowing it to hold the cable with uniform force. It demonstrates stable and high waterproof performance even against repeated tightening. It accommodates a wide range of cables from Φ2mm to Φ42mm. Total of 14 sizes available, from M6 to M50.

Strain relief cord protector helps to relief flex stress and damage to cables. 2 types - round and flat - are available. Insert from the inner side of the case / panel of the enclosure. Made from high heat resistant silicone material. A total of 8 different sizes available for selection. Color : Black (Similar to Munsell N1) / Off white (Similar to Munsell N8.75) ※ Does not prevent cables from being dislodged. 1 bag contains 10 pieces, standard price 790 yen (for all sizes). Product number / Compatible wire / Mounting hole diameter Φ / Compatible plate thickness (mm) CBS3055-15 / VFF0.75×2 / 7.6～7.8 / 1.5～2.0 CBS3055-20 / VFF0.75×2 / 7.6～7.8 / 2.0～2.5 CBS35-15 / Φ3.5 / 5.6～5.8 / 1.5～2.0 CBS35-20 / Φ3.5 / 5.6～5.8 / 2.0～2.5 CBS45-15 / Φ4.5 / 6.6～6.8 / 1.5～2.0 CBS45-20 / Φ4.5 / 6.6～6.8 / 2.0～2.5 CBS60-15 / Φ6.0 / 8.1～8.3 / 1.5～2.0 CBS60-20 / Φ6.0 / 8.1～8.3 / 2.0～2.5

Corrosion resistant stainless steel (SUS304) cable tie. Can be used to bundle cables or mounting enclosures to poles. Self-locking bracket allows easy mounting / cable bundling. Designed for one time use only (not reusable).

A low-cost hose band made of stainless steel with excellent corrosion resistance. It is a type of hose clamp that can be securely attached by tightening with a screw. It can be used for attaching air, liquid, and oil hoses. We offer a wide range of 23 sizes to accommodate various hose diameters, from 8mm to 308mm. In addition to hose attachment, it can also be used as a pole fixing band for outdoor boxes. A box driver (nut driver) is recommended for tightening. A flathead screwdriver can also be used. Product lineup: 23 sizes Material: Stainless steel SUS304

Integrated junction box consisting of cable glands and a terminal block. Suitable for industrial facilities, power cable joints, relay between motors and/or sensors. IP65 protection class with high oil resistant PBT material. 3, 4, and 6 pole types are available. Φ5.0 and Φ7.4 rubber cable bushes (2 pcs each) are included. Φ5.0 bush : Cable range Φ4～5mm Φ7.4 bush : Cable range Φ6～7mm

Economical metal cable gland. Wide selection available from M12 ~ M32. Protection class: Equivalent to IP67* Operating temperature: -20°C ~ +80°C *In-house test

With a slotted rubber bush, it is possible to pass through and waterproof cables with connectors.