ハイテック List of Products and Services

The "UA102-Sani Series" ultrasonic flow meter for sanitary/CIP high-temperature cleaning is an ultrasonic flow meter that achieves low cost, compact design, and easy installation. Since the detector is simply installed on the outside of the piping, no processing of the piping is required. Main Features: ■ Sensor and transducer separation type The detector part is non-contact with the fluid. ■ Compatible temperature: max. 150℃ Can also handle high-temperature fluids such as food cleaning (CIP) liquids. Operating Principle: When ultrasonic waves propagate through a liquid, the propagation time changes compared to a stationary state if there is flow. When the ultrasonic signal is transmitted and received between the upstream and downstream detectors/transducers through the moving liquid, a difference in passage/propagation time occurs between upstream and downstream. The flow velocity/flow rate is calculated from this time difference and indicated/output. For more details, please contact us or download the catalog.

The "UA102 Series" integrated ultrasonic flow meter with easy installation display is an ultrasonic flow meter that achieves low cost, compact design, and simple installation. Since the detector is simply installed on the outside of the piping, no processing of the piping is required. Main Features: - Installation time is approximately 1 minute! - Capable of measuring a minimum of 4mm in diameter! - Easy installation of the flow meter body without the need for modifications to existing piping - Compact design with an integrated display - Requires almost no installation space - Usable for clean water, seawater, oil, chemicals, etc. - Maintenance-free due to non-contact with the liquid Four types are available in the lineup: 1. Integrated display type UA102 Series 2. Separate display type UA102-S Series 3. High-temperature separate display type UA102-HiT Series 4. Sanitary separate display type UA102-Sani Series Operating Principle: When ultrasonic waves propagate through a liquid, the propagation time changes compared to a stationary state if there is flow. When the ultrasonic signal is transmitted and received between the upstream and downstream detectors/transducers through the moving liquid, a difference in the passage/propagation time occurs between upstream and downstream. The flow velocity/flow rate is calculated from this time difference and indicated/outputted.

Ultrasonic flow meters only require the installation of a detector on the outside of the piping, eliminating the need for any modifications to the piping. As a result, construction costs can be significantly reduced, and the time required for construction can be greatly shortened. Additionally, since detection occurs from the outside of the piping, there is no pressure loss, and it is suitable for measuring pure water and chemicals due to the non-contact nature with the fluid. Common Features: - One detector can handle large diameters up to φ3000mm. - Equipped with the latest DSP chip, improving accuracy and reliability. - Enhanced user assistance features, including a self-diagnosis program. - Capable of displaying both forward and reverse flow. - Excellent reproducibility and linearity. - Improved measurement performance during bubble intrusion. - Capable of measuring fluids with unknown sound speeds. SL1288i (Portable Type): - The main unit features a touch panel keypad, providing excellent operability. - Capable of measuring from a small diameter of 15mmφ. - Allows for trend graph confirmation of flow rate or flow velocity on the main unit. - Approximately 10 hours of continuous operation on a full charge. ISTT-D9000: - Easy settings with an interactive keypad. - Compact and lightweight, making installation easy. - Reverse direction negative integration can also be set.

Ultrasonic flow meters only require the installation of detectors on the outside of the piping, eliminating the need for pipe modifications. This significantly reduces construction costs and greatly shortens the time required for installation. Additionally, they allow for non-contact measurement and can measure corrosive fluids. Fluids such as food are also hygienic. Main Features: - Suitable for measuring fluids with foreign substances or bubbles that cannot be measured by the time-of-flight method. - Fluid measurement using the Doppler effect: When ultrasonic waves are transmitted to impurities or bubbles mixed in the fluid within the pipe, the frequency changes due to the movement speed of the particles, creating a frequency difference. The flow rate is calculated from this frequency difference. - Cannot measure clean fluids without impurities or bubbles. ■ Usage Precautions: - The pipe must be completely filled with water. - Measurement cannot be performed if there are bubbles or floating substances like debris in the fluid. Please consult us if you plan to use it with lined pipes or similar applications. - Install the indicator (converter) in a location not exposed to direct sunlight. - Consult us if there are power lines or railways near the installation site. - If installed in an area prone to lightning, please use lightning protection devices.

Ultrasonic flow meters only require the installation of detectors on the outside of the piping, eliminating the need for any modifications to the piping. As a result, construction costs can be significantly reduced, and the time required for construction can be greatly shortened. Additionally, since detection occurs from the outside of the piping, there is no pressure loss, and it is suitable for measuring pure water and chemicals due to the non-contact nature with the fluid. Main features: ● Easy setup with an interactive keypad ● Compact and lightweight for easy installation ● Reverse direction negative integration can also be set ● One detector can handle large diameters up to φ3000mm ● Equipped with the latest DSP chip for improved accuracy and reliability ● Enhanced user assistance features, including self-diagnosis programs ● Display options for both forward and reverse directions ● Excellent reproducibility and linearity ● Improved measurement performance during bubble intrusion ● Capable of measuring fluids with unknown sound speeds

Ultrasonic flow meters require no processing of the piping since the detector is simply installed on the outside of the pipe. As a result, construction costs can be significantly reduced, and there is no pressure loss. Additionally, because there is no contact with the fluid, they are suitable for measuring pure water and chemicals. Common Features: ● Enhanced reliability with the latest DSP chip ● Comprehensive user assistance features, including self-diagnosis programs ● Display in both forward and reverse directions is possible ● Reverse direction negative integration can also be set ● Excellent reproducibility and linearity ● Improved measurement during bubble inclusion Features of SL1168P (Portable Type): ● Integrated monitor and keypad for easy portability ● Equipped with a data logger that can record measurement data on a 2GB SD card ● Easy installation with a magnetic sensor frame ● Compatible with pipe diameters from φ25 to 1200mm using the included detector ● Lithium-ion battery allows for up to 16 hours of continuous operation Features of SL1168 (Fixed Type): ● Easy setup with an interactive keypad ● Ultra-compact and lightweight for easy installation

The OG series is a volumetric flow meter with an oval gear design that has a wealth of achievements both domestically and internationally. Its simple structure enables high precision and high reliability. The gear components are made of PEEK (polyether ether ketone), which offers high chemical resistance and strength, while the detection magnets use special ceramic magnets. The main case can be selected from three materials: SUS316, aluminum, and PEEK, depending on the application. It can also accommodate special specifications of up to 200°C and 40 MPa (for SUS316), making it suitable for various fields such as food, chemicals, and petroleum products.

Introducing the "Thermal Flow Meter SN450," which is low-cost, has no moving parts, and is less prone to malfunction. It is an insertion type, making it compatible with piping of 15A or larger with just one model, and it is characterized by low pressure loss.

EGE's "Thermal Flow Sensor and Flow Switch" is less prone to malfunction due to the absence of moving parts, and it can detect low flow rates (0.01 m/s) and low flow volumes (1 cc/min). In addition to the standard type, there is a short body type with sensor lengths of 25/31 mm, a long body type with lengths of 80/120 mm, an inline type with an inner diameter of 4 to 20 mm, and a high-temperature version that can handle temperatures from -10°C to 150°C, as well as options for gases and explosion-proof applications, offering a rich lineup. *We are currently offering a "comprehensive catalog" featuring many of these products for free! You can view it immediately from "Catalog Download." 【Features】 ■ Compatible with liquids containing impurities ■ A wide variety of sensor materials available ■ Operation status can be easily confirmed at a glance with an LED light

We feature a main lineup that includes new products. We carefully select high-performance and high-quality items, and our after-sales support is thorough. We have numerous delivery records in various sites across Japan and are widely used in a broad range of fields.