廣杉計器 List of Products and Services

"CB-BE" is a brass spacer compliant with RoHS. 【Specifications】 ■ Material: Free-cutting brass (C3604BD) with cadmium content of less than 75ppm ■ Treatment: Black nickel plating ■ RoHS compliant product ■ Minimum order quantity: 50 pieces or more *For more details, please refer to the PDF document or feel free to contact us.

The "LDZ-R/LDZ-T" is an LED mounting spacer for round types. The "LDZ-R" is designed for LED heads with diameters of 3φ and 5φ, allowing for the installation of LEDs in 2 or 3 tiers. It features a groove for resin buildup at the base of the LED legs, eliminating concerns about floating during installation. The "LDZ-T" is available in a standalone 100T for 1P and a 900T for 2P to 10P connections. The connected type has a pitch of 5.08, allowing for efficient LED connections without waste. It can also be easily cut to any desired number (no cutting tools required). 【LDZ-R Features】 ■ Spacer for installing LEDs in 2 or 3 tiers ■ For LED head diameters of 3φ and 5φ ■ Capable of installing LEDs in 2 or 3 tiers ■ Bendability can be visually confirmed ■ No concerns about floating during installation *For more details, please refer to the PDF document or feel free to contact us.

The "LDZ-C" is a continuous mounting LED spacer. It can be used for both vertical and horizontal applications, and is compatible with LED head diameters of 3φ and 5φ. With a 10P connection and a pitch of 5.08, it allows for efficient connection of 3φ and 5φ LEDs, and can be easily cut to any number below 10P. 【Features】 ■ Two types for round LED spacers and square LED spacers ■ Efficient connection of 3φ and 5φ LEDs with a 10P connection and a pitch of 5.08 ■ Easily cut to any number below 10P (no cutting tools required) ■ Compatible with LED head diameters of 3φ and 5φ ■ Square (for two-legged only) and round (for two-legged and three-legged use) *For more details, please refer to the PDF document or feel free to contact us.

The "LDN-400/400N/5400N" is a round LED mounting spacer. It complies with RoHS2, and the heat distortion temperature is 75°C at 1.82MPa. The material used is nylon 66, with the "LDN-400" for two-legged applications being black, while the "LDN-400N" for two-legged and "LDN-5400N" for four-legged applications are translucent. 【Specifications】 ■ Material: Nylon 66 ■ Color: Black, translucent ■ Heat distortion temperature: 75°C at 1.82MPa ■ UL standard: UL94V-2 (material) ■ RoHS2 compliant ■ Order quantity: 50 pieces or more *For more details, please refer to the PDF document or feel free to contact us.

The "LDN-500/500N/600N" is an LED mounting spacer for round and square types. We offer "LDN-500" and "LDN-500N" for two-legged applications, and "LDN-600N" for three-legged applications. The material used is nylon 66, which meets the UL standard UL94V-2 (material). 【Specifications】 ■ Material: Nylon 66 ■ Color: Black, translucent ■ Heat deformation temperature: 1.82MPa…75℃ ■ UL standard: UL94V-2 (material) ■ RoHS2 compliant ■ Minimum order quantity: 50 pieces～ *For more details, please refer to the PDF document or feel free to contact us.

The "LDN-500S/LDN-500P" is an LED mounting spacer for round shapes. It is a RoHS2 compliant product with short-circuit prevention partitions and guide feet. The material used is nylon 66, and the color is translucent, meeting UL standard UL94V-2 (material). 【Specifications】 ■ Material: Nylon 66 ■ Color: Translucent ■ Heat deformation temperature: 1.82MPa…75℃ ■ UL standard: UL94V-2 (material) ■ RoHS2 compliant product ■ Order quantity: 50 pieces or more *For more details, please refer to the PDF document or feel free to contact us.

"LDN-R/LDN-C/LDN-T" is an LED mounting spacer for round types. It includes models such as the right-angle mount "LDN-300R," the 22° mount "LDN-502T," and the connectable block "LDN-800C." It has obtained UL standard UL94V-2 (material), with a heat distortion temperature of 75°C at 1.82MPa. 【Specifications】 ■Material: Nylon 66 ■Color: Black, Semi-transparent ■Heat distortion temperature: 75°C at 1.82MPa ■UL standard: UL94V-2 (material) ■RoHS2 compliant ■Order quantity: 50 pieces or more *For more details, please refer to the PDF document or feel free to contact us.

The "LDX-300" is a round LED mounting spacer. It is made of phenolic resin and is black in color. Designed for two-legged use, it is a RoHS2 compliant product suitable for LED diameters of φ3 to φ5. 【Specifications】 ■ Material: Phenolic resin ■ Color: Black ■ RoHS2 compliant ■ Order quantity: 50 pieces or more *For more details, please refer to the PDF document or feel free to contact us.

The "LDC-305/LDC-509" is a round LED protective mounting cover for LEDs. By attaching it to the LED, it protects the LED and concentrates the light without diffusing it. The material used is silicone rubber, with "LDC-305" designed for φ3 and "LDC-509" for φ5. 【Specifications】 ■ Material: Silicone rubber ■ Color: Black ■ RoHS2 compliant ■ Minimum order quantity: 50 pieces～ *For more details, please refer to the PDF document or feel free to contact us.

The "LDZ-800/LDZ-800P" is a round, versatile LED mounting spacer. The "LDZ-800" is made of PBT, while the "LDZ-800P" is made of elastomer. It is designed for two-legged use, complies with RoHS2, and is available in black. 【Specifications (LDZ-800)】 ■Material: PBT (Grade #CN7030LB) ■Color: Black ■Heat deformation temperature: 1.82MPa…200℃ ■UL standard: UL94V-0 (material) *For more details, please refer to the PDF document or feel free to contact us.

The "LDZ-300/LDZ-500" is a round LED mounting spacer. The "LDZ-300" is for 2 or 3-legged with a diameter of φ3, while the "LDZ-500" is for 3-legged with a diameter of φ5. The heat distortion temperature is 200°C at 1.82MPa, and it has obtained UL standard UL94V-0 (material). 【Specifications】 ■ Material: PBT (Grade #CN7030LB) ■ Color: Black ■ Heat distortion temperature: 200°C at 1.82MPa ■ UL standard: UL94V-0 (material) ■ RoHS2 compliant ■ Order quantity: 50 pieces or more *For more details, please refer to the PDF document or feel free to contact us.

The "LDZ-400/600/700" is an LED mounting spacer for square and round types. It is made of PBT and complies with RoHS2. It is black in color, with a heat deformation temperature of 200°C at 1.82MPa. 【Specifications (LDZ-400, 600)】 ■ Material: PBT (Grade #CN7030LB) ■ Color: Black ■ Heat deformation temperature: 200°C at 1.82MPa ■ UL standard: UL94V-0 (material) *For more details, please refer to the PDF document or feel free to contact us.

The "WN-00MA/00MD/00G" is a one-touch mountable nylon spacer. It is designed for chassis and PC use, and is translucent in color. The material used is nylon 66, which meets the UL standard UL94V-2 (material). 【Specifications】 ■ Material: Nylon 66 ■ Color: Translucent ■ Heat deformation temperature: 1.82MPa…75℃ ■ UL standard: UL94V-2 (material) ■ RoHS2 compliant ■ Order quantity: 50 pieces or more *For more details, please refer to the PDF document or feel free to contact us.

The "WN-00C" is a spacer that allows for one-touch attachment of a chassis to a printed circuit board or between printed circuit boards. It is designed for both PC types and comes in a translucent color. In addition to being compliant with RoHS2, it has obtained UL standard UL94V-2 (material). 【Specifications】 ■Material: Nylon 66 ■Color: Translucent ■Heat deformation temperature: 1.82MPa…75℃ ■UL standard: UL94V-2 (material) ■RoHS2 compliant ■Order quantity: 50 pieces or more *For more details, please refer to the PDF document or feel free to contact us.

The "WN-00D/E" is a nylon spacer for chassis and PC use. It is compliant with RoHS2 and allows for one-touch installation. The material is nylon 66, and the color is translucent. We accept orders starting from 50 pieces. Please feel free to contact us when placing an order. 【Specifications】 ■ Material: Nylon 66 ■ Color: Translucent ■ Heat deformation temperature: 1.82MPa…75℃ ■ UL standard: UL94V-2 (material) *For more details, please refer to the PDF document or feel free to contact us.

The "WN-00F" is a nylon spacer for dual PC use that allows for one-touch installation. The material is nylon 66, and the color is semi-transparent, compliant with RoHS2. The heat distortion temperature is 75°C at 1.82MPa. We accept orders starting from 50 pieces. Please feel free to contact us when placing an order. 【Specifications】 ■ Material: Nylon 66 ■ Color: Semi-transparent ■ Heat distortion temperature: 75°C at 1.82MPa ■ UL standard: UL94V-2 (material) *For more details, please refer to the PDF document or feel free to contact us.

The "WN-00H/I/J" is a nylon spacer that allows for one-touch installation. The material is nylon 66, with a heat distortion temperature of 75°C at 1.82MPa. It meets the UL standard UL94V-2 (material). The "WN-00H" is for preventing board warping, while the "WN-00I" and "WN-00J" are for chassis and PC boards. Please feel free to contact us if you need assistance. 【Specifications】 ■ Material: Nylon 66 ■ Color: Translucent ■ Heat distortion temperature: 75°C at 1.82MPa ■ UL standard: UL94V-2 (material) *For more details, please refer to the PDF document or feel free to contact us.

The "CN-2000/2600/300/400" is a nylon spacer that has obtained UL standard UL94V-2 (material). The heat distortion temperature is 75°C at 1.82MPa. It is round and hollow, suitable for M2, M2.6, M3, and M4. We accept orders starting from 50 pieces. Please feel free to contact us when placing an order. 【Specifications】 ■ Material: Nylon 66 ■ Color: Semi-transparent ■ Heat distortion temperature: 75°C at 1.82MPa ■ UL standard: UL94V-2 (material) *For more details, please refer to the PDF document or feel free to contact us.

The "ASN-300/400" is a nylon spacer compliant with RoHS2. The "ASN-300" has a thread size of M=3, a pitch of 0.5, and a flat diameter of 5.5, while the "ASN-400" has a thread size of M=4, a pitch of 0.7, and a flat diameter of 7. These products are made of nylon 66 and are translucent in color. We accept orders starting from 50 pieces. Please feel free to contact us when placing an order. 【Specifications】 ■ Material: Nylon 66 ■ Color: Translucent ■ Heat deformation temperature: 1.82MPa…75℃ ■ UL standard: UL94V-2 (material) *For more details, please refer to the PDF document or feel free to contact us.

The "BSN Series" is a nylon spacer compliant with RoHS2. The "BSN-2000" has M=2 and a pitch of 0.4, while the "BSN-300" and "BSN-300-5" have M=3 and a pitch of 0.5, and the "BSN-400" has M=4 and a pitch of 0.7. It meets UL standard UL94V-2 (material). Orders are accepted from a minimum quantity of 50 pieces. Please feel free to contact us when placing an order. 【Specifications】 ■ Material: Nylon 66 ■ Color: Translucent ■ Heat deformation temperature: 1.82MPa…75℃ ■ UL standard: UL94V-2 (material) *For more details, please refer to the PDF document or feel free to contact us.

The "MSN/WSN series" is a nylon spacer that complies with RoHS2 standards. Products are available in sizes M=2, M=3, and M=4. "MSN" features a short male thread, while "WSN" comes with a nylon washer. Orders are accepted starting from a quantity of 50 pieces. Please feel free to contact us when placing an order. 【Specifications】 ■ Material: Nylon 66 ■ Color: Translucent ■ Heat deformation temperature: 1.82MPa…75℃ ■ UL standard: UL94V-2 (material) *For more details, please refer to the PDF document or feel free to contact us.

The "CNS-300/400" is a nylon spacer for M3 and M4 that has obtained the UL standard UL94V-2 (material). The material is nylon 66, and it is a round type and screw set type compliant with RoHS2. Additionally, the heat distortion temperature is 75°C at 1.82MPa. We accept orders starting from 50 pieces. Please feel free to contact us when placing an order. 【Specifications】 ■ Material: Nylon 66 ■ Color: Semi-transparent ■ Heat distortion temperature: 75°C at 1.82MPa ■ UL standard: UL94V-2 (material) *For more details, please refer to the PDF document or feel free to contact us.

The "KRB" terminal mounting base is a type of spacer that is attached to the circuit board with solder on one side. In addition to height adjustment, it can also be used for power supply by attaching wires and crimp terminals. The material is free-cutting brass (C3604BD), compliant with RoHS2 with a cadmium content of less than 75ppm. The surface treatment features gold plating (with a nickel undercoat) that has good solder wetting properties. In addition to the slotted shape, a separate groove is processed on the underside of the seat, allowing for smooth soldering. ~ A wide variety, low cost, and short delivery times! Speedy delivery and small lot offerings * Custom products can be made from as few as 50 pieces! * For details, please contact us or download the catalog. Currently, we are offering a free set of 30 product samples with the application for the catalog booklet. Please apply through our website's "Catalog Request" or contact us.

■Features - It is a hexagonal brass spacer with male threads on both ends. - The brass spacer has a surface treatment of "Ni plating." - It is mainly used to secure space between printed circuit boards. - It is a product with excellent corrosion resistance, distribution capability, and cost balance. - Compliant with EU-RoHS2 standards.

■Features - It is a hexagonal brass spacer with male threads on both ends. - It is an untreated brass spacer. - It is mainly used to secure space between printed circuit boards. - It is a product with excellent corrosion resistance, distribution, and cost balance. - Compliant with EU-RoHS2.

■Features - This is a hexagonal brass spacer with male threads on both ends. - It is a brass spacer that has undergone "black baked finish" surface treatment. - It is mainly used to secure space between printed circuit boards. - This product enhances rust resistance (corrosion resistance) and chemical resistance while also excelling in decorative quality. - Compliant with EU-RoHS2 standards.

■Features - It is a hexagonal brass spacer with male threads on both ends. - It is an untreated brass spacer. - It is mainly used for securing space between printed circuit boards. - It is a product with excellent corrosion resistance, availability, and cost balance. - It has been processed for use with countersunk screws. - Compliant with EU-RoHS2.

■Features - It is a hexagonal brass spacer with male threads on both ends. - The brass spacer has a surface treatment of "nickel plating." - It is mainly used to secure space between printed circuit boards. - It is a product with excellent corrosion resistance, availability, and cost balance. - It has been processed for use with countersunk screws. - Compliant with EU-RoHS2.

■Features - It is a hexagonal brass spacer with male threads on both ends. - The brass spacer has a surface treatment of "Ni plating." - It is mainly used to secure space between printed circuit boards. - It is a product with excellent corrosion resistance, availability, and cost balance. - The spacer is compatible with inch standard mounting screws. - Compliant with EU-RoHS2.

■Features - It is a hexagonal brass male-female threaded spacer. - The brass spacer has a surface treatment of "Ni plating." - It is mainly used to secure space between printed circuit boards. - It is a product that excels in corrosion resistance, distribution, and cost balance. - It is a spacer with an insulating cap attached on one side. - Compliant with EU-RoHS2.

■Features - It is a hexagonal double male thread spacer made of lead-free brass. - The brass spacer has a surface treatment of "Ni plating." - It is mainly used to secure space between printed circuit boards. - It is made from a material that has excellent machinability, corrosion resistance, and is non-magnetic, while being free of cadmium and lead. - The body features a BZ laser mark. - Compliant with EU-RoHS2 standards.

■Features - It is a steel hexagonal double-threaded spacer. - The steel spacer has undergone "trivalent chromium chromate treatment" for surface processing. - It is a product that excels in strength and cost balance. - Compliant with EU-RoHS2.

■Features - It is a steel hexagonal double-threaded spacer. - The steel spacer has undergone "trivalent chromium chromate treatment" for surface processing. - It is a product that excels in strength and cost balance. - It has been processed for use with pan head screws. - Compliant with EU-RoHS2 standards.

■Features - It is a stainless steel hexagonal double-ended threaded spacer. - The spacer is made of "SUS303" material. - It is a product with excellent strength, corrosion resistance, and heat resistance. - Compliant with EU-RoHS2 standards.

■Features - This is a stainless steel hexagonal double-ended threaded spacer. - The spacer is made from "SUS303" material. - It is a product with excellent strength, corrosion resistance, and heat resistance. - It has been processed for use with pan head screws. - Compliant with EU-RoHS2 standards.

■Features - This is a stainless steel hexagonal double-ended threaded spacer. - The spacer is made of high-grade "SUS304" material. - It is a product with excellent strength, corrosion resistance, and heat resistance. - The body is engraved with the letter "H." - Compliant with EU-RoHS2 standards.

■Features - This is a stainless steel hexagonal double-ended threaded spacer. - The spacer is made of high-grade "SUS316" material. - It is a product with excellent strength, corrosion resistance, and heat resistance. - The body is engraved with an identification beetle symbol. - Compliant with EU-RoHS2 standards.

■Features - It is a hexagonal double-ended threaded spacer made of lead-free aluminum. - The spacer has undergone "pickling" treatment on its surface. - It is very lightweight, making it suitable for reducing the weight of products. - It has excellent corrosion resistance, high thermal conductivity, and is non-magnetic. - It is widely used in various industrial fields such as moving parts, marine components, and precision instruments. - Compliant with EU-RoHS2.

■Features - This is a hexagonal double-threaded spacer made of lead-free aluminum. - The spacer has a "black anodized" treatment on its surface. - It is very lightweight, making it suitable for reducing the weight of products. - It has excellent corrosion resistance, high thermal conductivity, and is non-magnetic. - It is widely used in various industrial fields such as moving parts, marine components, and precision instruments. - Compliant with EU-RoHS2 standards.

■Features - This is a hexagonal double-threaded spacer made of lead-free aluminum. - The spacer has undergone "electroless nickel plating" treatment on its surface. - It is very lightweight, making it suitable for reducing the weight of products. - It has excellent corrosion resistance, high thermal conductivity, and is non-magnetic. - It is widely used in various industrial fields such as moving parts, marine components, and precision instruments. - Compliant with EU-RoHS2 standards.

■Features - It is a titanium hexagonal double-ended threaded spacer. - The spacer is made of "pure titanium." - It is a very lightweight product with excellent strength, corrosion resistance, and heat resistance. - It is non-magnetic and particularly excellent in saltwater resistance. - The body is engraved with a beetle symbol for identification. - Compliant with EU-RoHS2 standards.

■Features - It is a hexagonal male-female spacer made of brass. - The brass spacer has a surface treatment of "nickel plating." - It is mainly used to secure space between printed circuit boards. - It is a product with excellent corrosion resistance, distribution, and cost balance. - Compliant with EU-RoHS2.

■Features - It is a hexagonal male-female brass spacer. - The brass spacer is treated with "nickel plating" on the surface. - It is mainly used to secure space between printed circuit boards. - It is a product with excellent corrosion resistance, availability, and cost balance. - The screw diameter differs between the male and female threads. - Compliant with EU-RoHS2.

■Features - This is a hexagonal brass male-female spacer. - It is a brass spacer that has undergone "black baked coating" surface treatment. - It is mainly used to secure space between printed circuit boards. - The product enhances rust resistance (corrosion resistance) and chemical resistance while also excelling in decorative quality. - Compliant with EU-RoHS2 standards.

■Features - It is a hexagonal male-female brass spacer. - It is a brass spacer without surface treatment. - It is mainly used to secure space between printed circuit boards. - It is a product with excellent corrosion resistance, distribution, and cost balance. - Compliant with EU-RoHS2.