廣杉計器 List of Products and Services

This is a spacer-type terminal that is attached to the substrate by soldering. It is suitable for mounting screws with diameters of M2, M2.3, M3, and M4. 【Contents of the listing *For more details, please refer to the catalog.】 ★ We provide high-quality, low-cost, diverse products in small lots with an immediate delivery system. ★ Same-day shipping is available for the shortest delivery time, and we also accept estimates for custom products. ★ For more details, please download and check! ★ We also accept sample requests. *Please note that some products may not have samples available. ★ We will ship as many free booklets as you need from here. https://hirosugi.co.jp/form_hirosugi/index.php

At Hirozaki Keiki Co., Ltd., we offer a wide variety of "metal bushes." We support our customers with a diverse range of products, small lots, and short delivery times. 【Materials】 ○ Brass (nickel-plated) ○ Brass (degreased) ○ Iron (trivalent chromium chromate) ○ Aluminum (pickled, degreased) ○ Aluminum (black anodized) For more details, please contact us or download the catalog.

The "Battery Holder CDH" is a battery holder that mounts coin batteries onto printed circuit boards. Once the battery is installed, it is securely held in place, making it unlikely to come loose and eliminating concerns about poor contact. When removing or replacing the battery, it can be easily detached by gently pressing the central tab with a finger or pen tip. There are two types available: through-hole pin type and surface mount type. [Types] ○ CDH-100: For through-hole pin mounting (66 nylon) ○ CDH-200: Surface mount type (66 nylon) ○ CDH-300: For through-hole pin mounting (66 nylon) ○ CDH-400: For through-hole pin mounting (PBT) ○ CDH-500: Surface mount type (PPS) For more details, please contact us or download the catalog.

At Hirozaki Keiki Co., Ltd., we handle "Cable Terminal MWT" used as mounted components for printed circuit boards. We accept orders starting from 50 pieces. 【Specifications】 ○ Material: Free-cutting brass (C3604BD) with cadmium content of less than 75 ppm ○ Treatment: Gold plating (with nickel undercoat) ○ RoHS compliant product For more details, please contact us or download the catalog.

The "Power Terminal HP" is a power supply terminal that is mounted on a circuit board by inserting and soldering. There are 9 types available for installation from the top or side, with two surface treatments: gold plating and tin plating. The use of lug terminals makes wiring easy. The "Power Terminal (Insulated Type) MIS" is a spacer that is soldered to the circuit board. It can be securely fixed by inserting four pins into the circuit board. Since the pins are integrated into a resin base, there is no short circuit even if they come into contact from the side. It is also possible to install a lug terminal and supply power from the circuit board. 【Features】 [HP] ○ Four types of mounting screw sizes: M2, M2.6, M3, M4 ○ By adding an S at the end of the part number, mounting screws with gold or tin plating are included [MIS] ○ Using separately sold PPS small screws further enhances the insulation effect ○ Screw diameters of M2, M2.6, M3, with heights available in 4, 6, 8, and 10 For more details, please contact us or download the catalog.

The "adjustment component terminal" is a terminal for mounting adjustment components such as resistors and capacitors. Instead of placing the adjustment components on a groove, they are designed to be stable and less likely to fall off even before soldering, thanks to the thoughtfully designed hole shape. During soldering, the pins are tilted, allowing for better visibility of the soldering tip. When removing the mounted adjustment components, even if the opening of the C-shaped hole is obscured by solder, you can confirm it by the mark (notch) on the pin. 【Features】 ○ Pins can be mounted on the board at your preferred pitch, available in 10 colors (Part number HOC) ○ Two pins are integrated into the base for improved workability (Part numbers HOV・HOS) ○ Available in 6 types of pitch and 6 colors each (Part numbers HOV・HOS) ○ Melted solder is less likely to flow away due to the hole shape and the tilt of the pins (Part number HOS) For more details, please contact us or download the catalog.

At Hirose Instrument Co., Ltd., we handle "relay terminals" used as mounting components for printed circuit boards. 【Features】 ○ MTF・MTH → Ultra-small fluororesin relay terminals (relay wiring requiring electrical characteristics of the board, etc.) ○ MTK・MTL → Fluororesin relay terminals for wiring relay, press-fit mounted to the chassis ○ MR → Fluororesin relay terminals for concentrating the installation of additional components For more details, please contact us or download the catalog.

At Hiroshige Keiki Co., Ltd., we handle the "Multi-Purpose Terminal MT," which is used as a mounted component for printed circuit boards. 【Features】 ○ Easy to solder in grooves ○ Dual-purpose for wiring and checking ○ Flanged for vertical stability For more details, please contact us or download the catalog.

At Hirozuki Keiki Co., Ltd., we handle "test terminals" used as mounting components for printed circuit boards. We offer various types of test terminals (for signals, oscilloscope probes, and logic circuits). [Types] - Signal terminals (triangular, round, beryllium copper, free-cutting brass) - Oscilloscope probe terminals - Logic circuit terminals For more details, please contact us or download the catalog.

This is a product used for wire relay, signal checking, installation of adjustment parts, jumpers, stacking of circuit boards, circuit switching, cable installation, and power supply. All products are RoHS compliant. For more details, please download the catalog.

The adjustment component terminal "HOC" is designed to hold the adjustment component securely in place with a specially shaped hole, rather than simply resting it on a groove, making it stable and less likely to fall off even before soldering. Pins can be mounted on the board at your preferred pitch, and you can choose from 10 colors. When removing the installed adjustment component, even if the opening of the C-shaped hole is obscured by solder, you can verify it by the mark (notch) on the pin. For more details, please download the catalog.

The multi-purpose terminal "MT" is a versatile terminal used for wiring in electrical lines (relay), circuit checks with an oscilloscope tester, installation of adjustment components, installation of additional components, and more. For more details, please download the catalog.

The check terminal (for logic circuits) "HT" is a check terminal for logic circuits. For more details, please download the catalog.

The check terminal (for signals) "HYT" has a head shape that is an inverted triangle, allowing the signal check oscilloscope probe to be securely hooked. Even in areas where components are densely packed, the height of the beads makes it easy to confirm. The beads are available in 10 colors. For more details, please download the catalog.

The "MTS" terminal (fixed type) for 2.54mm pitch with stacked contacts has a contact part made of brass, treated with gold plating (with nickel undercoating), a resin part made of PBT (30% glass content), black in color, with a heat distortion temperature of 200°C at 1.82 MPa, and complies with UL standard UL94V-0 (material). For more details, please download the catalog.

The "MJS-0605O" jump socket (for circuit switching) with a 2.54mm pitch uses brass for the contact part and is treated with gold plating (with a nickel undercoat). The material of the resin part is PBT (with a glass content of 30%), available in black, blue, and red colors, with a heat distortion temperature of 200°C at 1.82MPa, and complies with UL94V-0 (material) standards. For more details, please download the catalog.

The cable terminal "MWT" is made of free-cutting brass (C3604BD) with a cadmium content of less than 75 ppm. It has been treated with gold plating (with a nickel undercoat of 2μ). For more details, please download the catalog.

The space terminal mounting base "KS" is a product (KS series) that can be used when seeking further interconnection and stability when mounting a sub-board with space terminals between boards. It can also be used as an inch-sized spacer. The material is free-cutting brass (C3604BD) with a cadmium content of less than 75 ppm. The treatment is nickel plating (Ni). For more details, please download the catalog.

The power terminal "HP-00423O" is made of brass (C2680R) and has been treated with gold plating (with nickel undercoating) and tin plating. The rated current is 15A. It is compliant with RoHS. We offer 9 types that can be mounted from the top or side. There are two types of surface treatments: gold plating and tin plating. For more details, please download the catalog.

The jumpers "HJA, HJB, HJC" use phosphor bronze (C5191W-H) for the material, and are treated with gold plating (with a nickel undercoat) for the jumper (2.54mm pitch) / HJA-3000 and HJA-6000, as well as for the jumper (2.00mm pitch) / HJB-3000 and HJB-6000. The protected jumper (2.54mm pitch) / HJC-6000 has a spring made of phosphor bronze (C5191W-H), treated with gold plating (with a nickel undercoat), and the insulating part is made of PBT. For more details, please download the catalog.

The terminal and L-type terminal "HRT-G" are made of brass and have been treated with gold plating (with a nickel undercoat). It is compliant with RoHS standards. For more details, please download the catalog.

The "KRB" terminal mounting base is made of free-cutting brass (C3604BD) with a cadmium content of less than 75ppm, and it is treated with gold plating (with a nickel undercoat). For more details, please download the catalog.

Can also be used as an inch-sized spacer.

Mounting adjustment components such as resistors and capacitors RoHS-compliant terminals for adjustment components 【Features】 ○ Instead of placing adjustment components on a groove, they are designed with a hole shape that keeps the components stable and less likely to fall off even before soldering. ○ Pins can be mounted on the board at your preferred pitch and are available in 10 colors. ○ When removing the mounted adjustment components, even if the opening of the C-shaped hole is obscured by solder, it can be confirmed by the mark (notch) on the pin. 【Specifications】 ○ Pin Material: Phosphor Bronze (C5191) Treatment: Gold plating 0.1μ (base nickel 2μ) ○ Base Material: PBT (30% glass fiber) Color: 10 colors Heat distortion temperature 1.82Mpa…200℃ (solder resistance) UL standard: UL94V-0 (material) ● For other functions and details, please contact us.

Power terminals for power supply, to be mounted by inserting into the substrate and soldering. 【Features】 ○ 9 types that can be mounted from the top and side ○ Two types of surface treatment: gold plating and tin plating ○ Four sizes of mounting screws: M2, M2.6, M3, M4 ○ Mounting screws with gold or tin plating can be attached ○ Easy wiring when used in conjunction with Hirose Electric's lug terminals ○ RoHS compliant product ● For other functions and details, please contact us.

Terminals for adjustment components such as resistors and capacitors, compliant with RoHS. 【Features】 ○ Instead of placing adjustment components on a groove, the thoughtfully designed hole shape keeps the components stable and less likely to fall off even before soldering. ○ The two pins are integrated into the base, improving workability. ○ Available in six pitch sizes and six colors to choose from. ○ During soldering, the pins are angled, allowing for better visibility of the soldering tip and preventing melted solder from flowing away easily. ○ When removing the installed adjustment components, even if the opening of the C-shaped hole is obscured by solder, the pins have marks (notches) for easy identification. ● For other functions and details, please contact us.

Terminals for adjustment components such as resistors and capacitors, compliant with RoHS. 【Features】 ○ The adjustment components are stable and less likely to fall off before soldering due to the designed hole shape, rather than being placed on a groove. ○ The incorporation of two pins into the base improves workability. ○ Available in six pitches and six colors. ○ When removing the installed adjustment components, even if the opening of the C-shaped hole is obscured by solder, the mark (notch) on the pin allows for confirmation. 【Specifications】 ○ Pins Material: Phosphor Bronze (C5191) Treatment: Gold plating 0.1μ (base nickel 2μ) ○ Base Material: PBT (30% glass fiber) Color: 6 colors Heat distortion temperature at 1.82MPa…200℃ (solder resistance) UL standard: UL94V-0 (material) ● For other functions and details, please contact us.

Concentrated installation of additional parts Fluororesin relay terminal 【Features】 ○Metal part Material: Phosphor bronze Treatment: Gold plating (nickel undercoat) ○Resin part Material: PTFE Color: Opaque white Heat resistance temperature: Continuous 240°C non-flammable UL standard: UL94V-0 (material) ○RoHS compliant product <MR Series Names> ○MR-000 (press-fit) / MR-0800 (solder type) ●For other functions and details, please contact us.

Press-fit mounting on the chassis Fluororesin relay terminal for wiring 【Features】 ○Metal part Material: Free-cutting brass (C3604BD) with cadmium content less than 75ppm Treatment: Gold plating (nickel undercoat) ○Resin part Material: PTFE Color: Opaque white Heat resistance temperature: Continuous 240℃ flame retardant UL standard: UL94V-0 (material) ○RoHS compliant product ●For other functions and details, please contact us.

Relay wiring requiring electrical characteristics such as substrates Ultra-compact fluororesin relay terminal 【Features】 ○Metal part ・Material: Free-cutting brass (C3604BD) with cadmium content less than 75ppm ・Treatment: Gold plating (nickel undercoat) ○Resin part ・Material: PTFE ・Color: Opaque white ・Heat resistance temperature: Continuous 240℃ flame retardant ・UL standard: UL94V-0 (material) ○RoHS compliant product ●For other functions and details, please contact us.

Insert the 4 pins into the circuit board and secure them firmly. Insulated power terminal for the main unit. 【Features】 ○ The pins are integrated into a resin base, so there is no short circuit even if they come into contact from the side. ○ It is also possible to connect power from the circuit board by attaching a lug terminal. ○ By using the separately sold PPS screws, the insulation effect is further enhanced. ○ Screw diameters available: M2, M2.6, M3, with heights selectable from 4, 6, 8, and 10. ○ RoHS compliant product. ● For other functions and details, please contact us.

Multi-purpose terminal ideal for circuit checks with wiring (relay) in electric wires and oscilloscope testers. 【Features】 ○ Material: Free-cutting brass (C3604BD) ○ Treatment: Gold plating (undercoat nickel 2μ) ○ RoHS2 compliant product ● For other functions and details, please contact us.

Multi-Variety Check Terminals for Logic Circuits 【Features】 ○ Board thickness check section and multiple varieties (4 types, 70 part numbers) ○ Material: Free-cutting brass (C3604BD) with cadmium content less than 75ppm ○ Treatment: Gold plating (with nickel undercoat of 2μ) ○ RoHS2 compliant products 【Product List】 ○ HT-0006 (for board thickness 0.6) ○ HT-0010 (for board thickness 1.0) ○ HT-0020 (for board thickness 2.0) ○ HT-0025 (for board thickness 2.5) ● For other functions and details, please contact us.

Small type, usable from all directions RoHS compliant check terminal for oscilloscope probes 【Features】 ○ 2.54 pitch or half pitch, allowing for versatile usage ○ Circuit separation possible with 10 color options ○ High position type available for easy probe attachment ○ Pins Material: Phosphor bronze (C5191) Treatment: Gold plating 0.1μ (with nickel base 2μ) ○ Base Material: PBT (30% glass fiber) Color: 10 colors Heat distortion temperature: 1.82Mpa…200℃ (solder resistance) UL standard: UL94V-0 (material) RoHS compliant product ● For other functions and details, please contact us.

Due to molding, the softening point has significantly increased to 670°C. RoHS compliant signal check terminal. 【Features】 ○ High dimensional accuracy due to molding ○ The head shape is an inverted triangle, allowing the signal check oscilloscope probe to be securely hooked ○ Even in densely packed areas, the tall beads make them easy to identify ○ Beads available in 10 colors ○ Printed circuit board mounting hole diameter: 1.0φ ● For other functions and details, please contact us.