廣杉計器 Product Lineup

■Features - This is a set of small screws made of PVDF (polyvinylidene fluoride resin) with PTFE washers. - PC (polycarbonate) is a type of amorphous engineering plastic based on thermoplastic resin. - As for physical properties, it has high transparency and impact resistance, offering transparency comparable to glass and about 50 times the impact resistance, along with excellent weather resistance, low water absorption, and self-extinguishing properties. - Applications: Widely used in transparent structures, optical components, electronic device cases, security equipment, and more. - Unlike metal screws, resin screws are insulating, lightweight, and do not rust, making them suitable for weight reduction and insulation purposes. - Compliant with EU-RoHS2 standards.

• Other machine elements

■Features - This is a set screw with a polycarbonate (PC) screw and an NBR washer. - PC (polycarbonate) is a type of amorphous engineering plastic based on thermoplastic resin. - Its physical properties include high transparency and impact resistance, offering transparency comparable to glass and approximately 50 times the impact resistance, along with excellent weather resistance, low water absorption, and self-extinguishing properties. - Applications: Widely used in transparent structures, optical components, electronic device cases, security equipment, and more. - Unlike metal screws, resin screws are insulating, lightweight, and do not rust, making them suitable for weight reduction and insulation purposes. - Compliant with EU-RoHS2 standards.

• Other machine elements

■Features ・This is a set screw with a small screw made of RENY (polyamide MXD6) and a washer made of NBR. ・"RENY" is a polyamide resin-based molding material primarily composed of polyamide MXD6. ・This material boasts the highest strength and elastic modulus among engineering plastics, along with excellent insulation, oil resistance, and low water absorption. ・In the industrial sector, it is widely trusted as an alternative to metal materials and is extensively used in applications requiring high reliability, such as automotive parts, electrical and electronic devices, and machine components. ・Unlike metal screws, resin screws are insulating, lightweight, and do not rust, making them suitable for weight reduction and insulation purposes. ・This product complies with EU-RoHS2 standards.

• Other machine elements

■Features - This is a set screw with a small screw made of PPS (40% glass fiber) and a washer made of PPS. - "PPS (Polyphenylene Sulfide)" is a crystalline super engineering plastic. - The inclusion of glass fiber significantly enhances strength and rigidity. - PPS excels in heat resistance, mechanical properties, electrical properties, dimensional stability, and flame retardancy, and it also possesses stability and durability at high temperatures, making it suitable for harsh environments. - It is widely used in high-performance components for electronic devices, machinery, and chemical equipment. - Unlike metal screws, resin screws are insulating, lightweight, and do not rust, making them suitable for weight reduction and insulation purposes. - It complies with EU-RoHS2 standards.

• Other machine elements

■Features - This is a set screw with a nylon 66 screw and an NBR washer. - "Nylon" is the world's first synthetic fiber, made from petroleum-derived polyamide. - It has high strength, is resistant to friction, and possesses impact resistance, chemical resistance, flame retardancy, and cold resistance, as well as moisture absorption and resistance to many chemical substances. - It is widely used in textile products, plastic parts, industrial equipment, electronic components, and more. - Unlike metal screws, resin screws are insulating, lightweight, and do not rust, making them suitable for applications requiring weight reduction and insulation. - It complies with EU-RoHS2 standards.

• Other machine elements

■Features - This is a set screw with a small screw made of PPS (40% glass fiber) and a silicone rubber washer. - "PPS (Polyphenylene Sulfide)" is a crystalline super engineering plastic. - The inclusion of glass fiber significantly improves strength and rigidity. - PPS excels in heat resistance, mechanical properties, electrical properties, dimensional stability, and flame retardancy, and it also has stability and durability at high temperatures, making it suitable for harsh environments. - It is widely used in high-performance components for electronic devices, machinery, and chemical equipment. - Unlike metal screws, resin screws are insulated, lightweight, and do not rust, making them suitable for weight reduction and insulation purposes. - It complies with EU-RoHS2 standards.

• Other machine elements

■Features - It is a flat washer made of iron (electroless nickel plating). - A metal washer (also known as a shim) is a metal part that is placed between a bolt and a nut. - Washers are generally used when tightening screws, placed between the screw and the workpiece to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - By placing a washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the target material, thereby maintaining a certain fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. - Additionally, it serves to prevent direct contact between the bolt or nut and the surface of the component. - By inserting a washer, it is possible to alleviate contact between components, reducing wear and corrosion. - Washers can be used as alternatives to flat washers, round washers, round washers, or plain washers (sometimes abbreviated as "W").

• Other machine elements

■Features - This is a set screw with a PVDF (polyvinylidene fluoride) screw and a silicone rubber washer. - PC (polycarbonate) is a type of amorphous engineering plastic based on thermoplastic resin. - As for physical properties, it has high transparency and impact resistance, offering transparency comparable to glass and approximately 50 times the impact resistance, along with excellent weather resistance, low water absorption, and self-extinguishing properties. - Applications: Widely used in transparent structures, optical components, electronic device cases, security equipment, and more. - Unlike metal screws, resin screws are insulating, lightweight, and do not rust, making them suitable for weight reduction and insulation purposes. - Compliant with EU-RoHS2 standards.

• Other machine elements

■Features - This is an insulating bush made of PPS. - Generally, a bush refers to a cylindrical or donut-shaped mechanical component that serves to fill the gaps between parts. - It is used as a bearing component that fits into the shafts or tubular members of mechanical parts to fill gaps or provide cushioning. - Resin bushes are excellent in insulation and chemical resistance, and unlike metals, they do not rust, making them suitable for lightweight applications, chemical resistance, and insulation. - They are strong against chemicals and corrosion, allowing for use in liquids.

• Plastic bearings

■Features - This is a small round screw made of PC (polycarbonate). It has a flat top and a conical seating surface, allowing the head to be embedded through a knurling process. - PC (polycarbonate) is a type of amorphous engineering plastic based on thermoplastic resin. - As for physical properties, it has high transparency and impact resistance, offering transparency comparable to glass and approximately 50 times the impact resistance, along with excellent weather resistance, low water absorption, and self-extinguishing properties. - Applications: Widely used in transparent structures, optical components, electronic device cases, security equipment, and more. - Unlike metal screws, resin screws are insulating, lightweight, and do not rust, making them suitable for weight reduction and insulation purposes. - Compliant with EU-RoHS2 standards.

• Other machine elements

■Features - This is a set of small screws with a polycarbonate (PC) pan head screw and a polycarbonate washer. - PC (polycarbonate) is a type of amorphous engineering plastic based on thermoplastic resin. - As for physical properties, it has high transparency and impact resistance, offering transparency comparable to glass and approximately 50 times the impact resistance, along with excellent weather resistance, low water absorption, and self-extinguishing properties. - Applications: Widely used in transparent structures, optical components, electronic device cases, security equipment, and more. - Unlike metal screws, resin screws are insulating, lightweight, and do not rust, making them suitable for weight reduction and insulation purposes. - Compliant with EU-RoHS2 standards.

• Other machine elements

■Features - It is an insulating bush made of black Duracon (POM). - A bush generally refers to a cylindrical or donut-shaped mechanical component used to fill gaps between parts. - It is used as a bearing component that fits onto shafts or tubular materials of mechanical parts to fill gaps or provide cushioning. - Resin bushes are excellent in insulation and chemical resistance, and unlike metals, they are lightweight and do not rust, making them suitable for applications requiring weight reduction, chemical resistance, and insulation. - They are strong against chemicals and corrosion, allowing for use in liquids.

• Plastic bearings

■Features - This is a small screw made of PC (polycarbonate). It has a flat top surface and a conical seating surface, allowing the head to be embedded through a knurling process. - PC (polycarbonate) is a type of amorphous engineering plastic based on thermoplastic resin. - As for physical properties, it has high transparency and impact resistance, offering transparency comparable to glass and about 50 times the impact resistance, along with excellent weather resistance, low water absorption, and self-extinguishing properties. - Applications: Widely used in transparent structures, optical components, electronic device cases, security equipment, and more. - Unlike metal screws, resin screws are insulating, lightweight, and do not rust, making them suitable for weight reduction and insulation purposes. - Compliant with EU-RoHS2 standards.

• Other machine elements

■Features ・This is a small screw made of RENY (polyamide MXD6). It has a flat top surface and a conical seating surface, allowing for the head to be embedded through a knurling process. ・"RENY" is a polyamide resin-based molding material primarily composed of polyamide MXD6. ・This material boasts the highest strength and elasticity among engineering plastics, along with excellent insulation properties, oil resistance, and low water absorption. ・In the industrial sector, it is widely trusted as an alternative to metal materials and is extensively used in applications requiring high reliability, such as automotive parts, electrical and electronic devices, and mechanical components. ・Unlike metal screws, resin screws are insulating, lightweight, and do not rust, making them suitable for weight reduction and insulation purposes. ・It complies with EU-RoHS2 standards.

• Other machine elements

■Features - It is an insulating bushing made of PTFE. - A bushing generally refers to a cylindrical or donut-shaped mechanical component that serves to fill the gaps between parts. - It is used as a bearing component that fits onto the shafts or tubular members of mechanical parts to fill gaps or provide cushioning. - Resin bushings are excellent in insulation and chemical resistance, and unlike metals, they do not rust, making them suitable for lightweight applications, chemical resistance, and insulation. - They are strong against chemicals and corrosion, allowing for use even in liquids.

• Plastic bearings

Space-saving multi-layered and connected substrate spacer with one side male thread and the other side female thread. Ideal for stacking printed circuit boards and securing them to enclosures. Allows for easy incremental height adjustment through extension (connection fixation), contributing to space-saving design. The hexagonal shape ensures a secure fit for tools, boasting high workability from manual to automatic assembly. High durability specification with high-precision brass coated with nickel plating. Made of brass (bronze) with excellent machinability, it offers extremely high screw precision for smooth fastening. The nickel plating on the surface effectively prevents oxidation and rust of the brass, maintaining aesthetics and corrosion resistance over the long term.

• Other electronic parts

■Features - This is a small screw made of PPS (40% glass fiber). It has a flat top surface and a conical seating surface, allowing for the head to be embedded through a knurling process. - "PPS (Polyphenylene Sulfide)" is a crystalline super engineering plastic. - The inclusion of glass fibers significantly enhances strength and rigidity. - PPS excels in heat resistance, mechanical properties, electrical properties, dimensional stability, and flame retardancy, and it also possesses stability and durability at high temperatures, making it suitable for harsh environments. - It is widely used in high-performance components for electronic devices, machinery, and chemical equipment. - Unlike metal screws, resin screws are insulating, lightweight, and do not rust, making them ideal for applications requiring weight reduction and insulation. - It complies with EU-RoHS2 standards.

• Other machine elements

We would like to introduce our "Polycarbonate Knurled Knob." We offer the all-polycarbonate models "NBPC-300/400/300W/400W," and the models with a polycarbonate head and metal screw part "NBPU-300W,B,R/400W,B,R." The colors available are transparent and white for NBPC, and white, black, and red (only for the resin part) for NBPU. Additionally, we also handle "PEEK Knurled Knobs," which use polyether ether ketone as the material. Please feel free to contact us. 【Specifications】 ■ Material: PC (Polycarbonate) ■ Colors - NBPC: Transparent, White - NBPU: White, Black, Red (only for the resin part) ■ Heat deformation temperature: 1.82MPa…130℃ ■ UL standard: UL94V-2 (Material) *For more details, please refer to the PDF document or feel free to contact us.

• nut

We would like to introduce our brass insert color "ICM." The material is brass (C3604BD), with a cadmium content of less than 75ppm. It is a RoHS2 compliant product without plating. We offer products that accommodate various sizes. Please feel free to contact us when you need assistance. 【Specifications】 ■ Material: Brass (C3604BD) with cadmium content of less than 75ppm ■ Treatment: Without plating *For more details, please refer to the PDF document or feel free to contact us.

• nut

We would like to introduce our brass insert color "IC-Z." The material is brass (C3604BD) with a cadmium content of less than 75ppm. It is compliant with RoHS2 for M3, M4, and M5. We offer a wide range of products, including "IC-304520Z," "IC-304530Z," and "IC-304540Z." We accept orders starting from 50 pieces, so please feel free to contact us. 【Specifications】 ■ Material: Brass (C3604BD) with cadmium content of less than 75ppm ■ Treatment: No plating *For more details, please refer to the PDF document or feel free to contact us.

• nut

The "NNI-0000" is a nylon nut insert that can be secured with screw tightening from one side only, reducing the labor involved in the work process. Insert the product into the mounting hole of the housing, sandwiching the circuit board or chassis, and secure it with screws. During screw tightening, the aluminum nut protrudes upward, and the main body expands outward to secure it. Additionally, the 0.75mm thick flange allows for extremely short installation times, and it can also be used to fix plates or similar items to the outer surface of the housing. 【Features】 ■ No need for nut fastening from the inside ■ Reduces labor in the work process ■ Extremely short installation time achieved with a 0.75mm thick flange ■ Can be used for fixing plates or similar items to the outer surface of the housing ■ Multi-layer spacing is possible by attaching round spacers *For more details, please refer to the PDF document or feel free to contact us.

• nut

The "HMIB Series" is a brass mini bit insert compliant with RoHS2. We offer the "HMIB-140000Z" with a pitch of 0.3 for M=1.4, the "HMIB-160000Z" with a pitch of 0.35 for M=1.6, and the "HMIB-170000Z" with a pitch of 0.35 for M=1.7. We accept orders starting from 50 pieces. Please feel free to contact us when placing an order. 【Product Overview】 ■Usage: Press-fit / Heat press-fit ■Compatible resin: Thermoplastic <Specifications> ■Material: Brass (C3604BD) with cadmium content of less than 75ppm ■Treatment: No plating *For more details, please refer to the PDF document or feel free to contact us.

• nut

"HFU" is a brass Ultra Surt IV (flanged type) without plating. We offer products that correspond to sizes M3, M4, M5, M6, and M8. The material used is brass (C3604BD) with a cadmium content of less than 75 ppm. We accept orders starting from 50 pieces. Please feel free to contact us when placing an order. 【Product Lineup】 ■HFU-43001 ■HFU-44001 ■HFU-45001 ■HFU-46001 ■HFU-48001 *For more details, please refer to the PDF document or feel free to contact us.

• nut

The "HUDII/IV" is a non-plated insert nut that complies with RoHS2 standards. "HUD II" refers to UltraSert II, and "HUD IV" refers to UltraSert IV, both made of brass (C3604BD) with a cadmium content of less than 75 ppm. We offer a variety of products that accommodate different sizes. Please feel free to contact us when you need assistance. 【Product Lineup (Partial)】 ＜HUD II＞ ■HUD−22601 ■HUD−22602 ■HUD−23001 ■HUD−23002 ■HUD−24001 *For more details, please refer to the PDF document or feel free to contact us.

• nut

The "HFB Series" is a flange-type brass bit insert. Starting with the "HFB-2000" with M=2 and a pitch of 0.4, the lineup includes "HFB-2600," "HFB-300," "HFB-400," and "HFB-500." These products are made from brass (C3604BD) with a cadmium content of less than 75 ppm, compliant with RoHS2, and are unplated. Please feel free to contact us if you have any inquiries. 【Lineup】 ■ HFB-2000: M=2, Pitch 0.4 ■ HFB-2600: M=2.6, Pitch 0.45 ■ HFB-300: M=3, Pitch 0.5 ■ HFB-400: M=4, Pitch 0.7 ■ HFB-500: M=5, Pitch 0.8 *For more details, please refer to the PDF document or feel free to contact us.

• nut

The "HSB-Z" is an insert nut made from brass (C3604BD) with a cadmium content of less than 75ppm. We offer a wide range of sizes from M1.4 to M1.6, M1.7, M2, M2.6, M3, M4, and M5. Additionally, it is available in a non-plated, double-sided type. Please feel free to contact us when you need assistance. 【Product Lineup (Partial)】 ■HSB−1401Z ■HSB−143030Z ■HSB−1603040Z ■HSB−173025Z ■HSB−173040Z *For more details, please refer to the PDF document or feel free to contact us.

• nut

The "HSB" is a brass bit insert that complies with RoHS2 standards. The material is brass (C3604BD) with a cadmium content of less than 75ppm. It is a single-sided type without plating. We offer a wide range of sizes from M1.4 to M1.6, M1.7, M2, M2.6, M3, M4, and M5. Please feel free to contact us when you need assistance. 【Product Lineup (Partial)】 ■HSB−143030 ■HSB−1603040 ■HSB−173025 ■HSB−173040 ■HSB−173540 *For more details, please refer to the PDF document or feel free to contact us.

• nut

The "HFD-2600/300/400/500" is a brass duct insert compliant with RoHS2 standards. It is unplated, made of brass (C3604BD) with a cadmium content of less than 75 ppm. In addition to the "HFD-2600" with M=2.6 and a pitch of 0.45, we also offer "HFD-300," "HFD-400," and "HFD-500." Please feel free to contact us for inquiries. 【Product Lineup】 ■HFD-2600: M=2.6, pitch 0.45 ■HFD-300: M=3, pitch 0.5 ■HFD-400: M=4, pitch 0.7 ■HFD-500: M=5, pitch 0.8 *For more details, please refer to the PDF document or feel free to contact us.

• nut

The "HSD-2600/300/400/500" is an insert nut made from brass (C3604BD) with a cadmium content of less than 75ppm. Starting with "HSD-2600" with M=2.6, we also offer "HSD-300" with M=3, "HSD-400" with M=4, and "HSD-500" with M=5. We accept orders starting from 50 pieces. Please feel free to contact us when placing an order. 【Product Lineup】 ■HSD-2600: M=2.6 Pitch 0.45 ■HSD-300: M=3 Pitch 0.5 ■HSD-400: M=4 Pitch 0.7 ■HSD-500: M=5 Pitch 0.8 *For more details, please refer to the PDF document or feel free to contact us.

• nut

The "IRL-0000K/KW/B/BW" is a screw-in aluminum insert nut. The material is lead-free free-cutting aluminum (KS26) with a lead content of 300ppm or less. We offer "IRL-K" and "IRL-KW" with a Kanizen plating treatment, and "IRL-B" and "IRL-BW" with a black anodized treatment. Additionally, you can choose between no anti-loosening coating and with anti-loosening coating. 【Lineup】 ■ Kanizen plating, no anti-loosening coating: IRL-0000K ■ Black anodizing, no anti-loosening coating: IRL-0000B ■ Kanizen plating, with anti-loosening coating: IRL-0000KW ■ Black anodizing, with anti-loosening coating: IRL-0000BW *For more details, please refer to the PDF document or feel free to contact us.

• nut

The "IRU-0000/W/S/SW" is a stainless steel insert nut made from free-cutting stainless steel (SUS303). You can choose between having or not having slits, and whether or not to apply a locking agent. The locking agent LOCTITE 516 is a high-viscosity, non-toxic, thixotropic, water-soluble pre-coating agent. 【Lineup】 ■ No slits, no locking agent applied: IRU-0000 ■ No slits, locking agent applied: IRU-0000W ■ With slits, no locking agent applied: IRU-0000S ■ With slits, locking agent applied: IRU-0000SW *For more details, please refer to the PDF document or feel free to contact us.

• nut

We would like to introduce our brass insert nut, 'IRB-0000S/SC/SW/SCW'. The material is brass (C3604BD) with a cadmium content of less than 75ppm. The "IRB-SC" and "IRB-SCW" are unplated, while the "IRB-S" and "IRB-SW" have undergone nickel plating (Ni) treatment. Please feel free to contact us when placing an order. 【Product Lineup】 ■IRB-0000S: Nickel plated, no anti-loosening coating ■IRB-0000SC: Unplated, no anti-loosening coating ■IRB-0000SW: Nickel plated, with anti-loosening coating ■IRB-0000SCW: Unplated, with anti-loosening coating *For more details, please refer to the PDF document or feel free to contact us.

• nut

The "IRB-0000/C/W/CW" is a screw-in brass insert nut. The material is brass (C3604BD) with a cadmium content of less than 75 ppm. The "IRB" and "IRB-W" are treated with nickel plating (Ni), while the "IRB-C" and "IRB-CW" have no plating. We accept orders starting from 50 pieces. Please feel free to contact us when placing an order. 【Product Lineup】 ■IRB-0000: Nickel plated, no anti-loosening coating ■IRB-0000C: No plating, no anti-loosening coating ■IRB-0000W: Nickel plated, with anti-loosening coating ■IRB-0000CW: No plating, with anti-loosening coating *For more details, please refer to the PDF document or feel free to contact us.

• nut

The "CNS-300/400" is a nylon spacer for M3 and M4 that has obtained the UL standard UL94V-2 (material). The material is nylon 66, and it is a round type and screw set type compliant with RoHS2. Additionally, the heat distortion temperature is 75°C at 1.82MPa. We accept orders starting from 50 pieces. Please feel free to contact us when placing an order. 【Specifications】 ■ Material: Nylon 66 ■ Color: Semi-transparent ■ Heat distortion temperature: 75°C at 1.82MPa ■ UL standard: UL94V-2 (material) *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables
• Other electronic parts

The "MSN/WSN series" is a nylon spacer that complies with RoHS2 standards. Products are available in sizes M=2, M=3, and M=4. "MSN" features a short male thread, while "WSN" comes with a nylon washer. Orders are accepted starting from a quantity of 50 pieces. Please feel free to contact us when placing an order. 【Specifications】 ■ Material: Nylon 66 ■ Color: Translucent ■ Heat deformation temperature: 1.82MPa…75℃ ■ UL standard: UL94V-2 (material) *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables
• Other electronic parts

The "BSN Series" is a nylon spacer compliant with RoHS2. The "BSN-2000" has M=2 and a pitch of 0.4, while the "BSN-300" and "BSN-300-5" have M=3 and a pitch of 0.5, and the "BSN-400" has M=4 and a pitch of 0.7. It meets UL standard UL94V-2 (material). Orders are accepted from a minimum quantity of 50 pieces. Please feel free to contact us when placing an order. 【Specifications】 ■ Material: Nylon 66 ■ Color: Translucent ■ Heat deformation temperature: 1.82MPa…75℃ ■ UL standard: UL94V-2 (material) *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables
• Other electronic parts

The "ASN-300/400" is a nylon spacer compliant with RoHS2. The "ASN-300" has a thread size of M=3, a pitch of 0.5, and a flat diameter of 5.5, while the "ASN-400" has a thread size of M=4, a pitch of 0.7, and a flat diameter of 7. These products are made of nylon 66 and are translucent in color. We accept orders starting from 50 pieces. Please feel free to contact us when placing an order. 【Specifications】 ■ Material: Nylon 66 ■ Color: Translucent ■ Heat deformation temperature: 1.82MPa…75℃ ■ UL standard: UL94V-2 (material) *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables
• Other electronic parts

The "CN-2000/2600/300/400" is a nylon spacer that has obtained UL standard UL94V-2 (material). The heat distortion temperature is 75°C at 1.82MPa. It is round and hollow, suitable for M2, M2.6, M3, and M4. We accept orders starting from 50 pieces. Please feel free to contact us when placing an order. 【Specifications】 ■ Material: Nylon 66 ■ Color: Semi-transparent ■ Heat distortion temperature: 75°C at 1.82MPa ■ UL standard: UL94V-2 (material) *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables
• Other electronic parts

The "WN-00H/I/J" is a nylon spacer that allows for one-touch installation. The material is nylon 66, with a heat distortion temperature of 75°C at 1.82MPa. It meets the UL standard UL94V-2 (material). The "WN-00H" is for preventing board warping, while the "WN-00I" and "WN-00J" are for chassis and PC boards. Please feel free to contact us if you need assistance. 【Specifications】 ■ Material: Nylon 66 ■ Color: Translucent ■ Heat distortion temperature: 75°C at 1.82MPa ■ UL standard: UL94V-2 (material) *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables
• Other electronic parts

The "WN-00F" is a nylon spacer for dual PC use that allows for one-touch installation. The material is nylon 66, and the color is semi-transparent, compliant with RoHS2. The heat distortion temperature is 75°C at 1.82MPa. We accept orders starting from 50 pieces. Please feel free to contact us when placing an order. 【Specifications】 ■ Material: Nylon 66 ■ Color: Semi-transparent ■ Heat distortion temperature: 75°C at 1.82MPa ■ UL standard: UL94V-2 (material) *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables
• Other electronic parts

The "WN-00D/E" is a nylon spacer for chassis and PC use. It is compliant with RoHS2 and allows for one-touch installation. The material is nylon 66, and the color is translucent. We accept orders starting from 50 pieces. Please feel free to contact us when placing an order. 【Specifications】 ■ Material: Nylon 66 ■ Color: Translucent ■ Heat deformation temperature: 1.82MPa…75℃ ■ UL standard: UL94V-2 (material) *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables
• Other electronic parts

The "WN-00C" is a spacer that allows for one-touch attachment of a chassis to a printed circuit board or between printed circuit boards. It is designed for both PC types and comes in a translucent color. In addition to being compliant with RoHS2, it has obtained UL standard UL94V-2 (material). 【Specifications】 ■Material: Nylon 66 ■Color: Translucent ■Heat deformation temperature: 1.82MPa…75℃ ■UL standard: UL94V-2 (material) ■RoHS2 compliant ■Order quantity: 50 pieces or more *For more details, please refer to the PDF document or feel free to contact us.

• Printed Circuit Board
• PCB terminal blocks
• Other semiconductors

The "WN-00MA/00MD/00G" is a one-touch mountable nylon spacer. It is designed for chassis and PC use, and is translucent in color. The material used is nylon 66, which meets the UL standard UL94V-2 (material). 【Specifications】 ■ Material: Nylon 66 ■ Color: Translucent ■ Heat deformation temperature: 1.82MPa…75℃ ■ UL standard: UL94V-2 (material) ■ RoHS2 compliant ■ Order quantity: 50 pieces or more *For more details, please refer to the PDF document or feel free to contact us.

• Printed Circuit Board
• PCB terminal blocks
• Other semiconductors

The "LDZ-400/600/700" is an LED mounting spacer for square and round types. It is made of PBT and complies with RoHS2. It is black in color, with a heat deformation temperature of 200°C at 1.82MPa. 【Specifications (LDZ-400, 600)】 ■ Material: PBT (Grade #CN7030LB) ■ Color: Black ■ Heat deformation temperature: 200°C at 1.82MPa ■ UL standard: UL94V-0 (material) *For more details, please refer to the PDF document or feel free to contact us.

• Printed Circuit Board
• PCB terminal blocks
• Other semiconductors

The "LDZ-300/LDZ-500" is a round LED mounting spacer. The "LDZ-300" is for 2 or 3-legged with a diameter of φ3, while the "LDZ-500" is for 3-legged with a diameter of φ5. The heat distortion temperature is 200°C at 1.82MPa, and it has obtained UL standard UL94V-0 (material). 【Specifications】 ■ Material: PBT (Grade #CN7030LB) ■ Color: Black ■ Heat distortion temperature: 200°C at 1.82MPa ■ UL standard: UL94V-0 (material) ■ RoHS2 compliant ■ Order quantity: 50 pieces or more *For more details, please refer to the PDF document or feel free to contact us.

• Printed Circuit Board
• PCB terminal blocks
• Other semiconductors