竹内工業 Product Lineup

The "GSTP series" is a grounding strap that excels in impedance characteristics in the high-frequency range. The conductive part is made of a single metal, which reduces conduction loss. The insulating part uses a non-halogen type flame-retardant insulating resin (UL94VTM-0). Additionally, its slim design allows it to be used in tight spaces, and it is very flexible, making installation easy. 【Features】 - Slim design allows for use in narrow spaces - Highly flexible for easy installation - Conductive part is made of a single metal to reduce conduction loss - Excellent impedance characteristics in the high-frequency range - Insulating part uses a non-halogen type flame-retardant insulating resin (UL94VTM-0) *For more details, please refer to the PDF document or feel free to contact us.

• plastic
• Other electronic parts

We would like to introduce the "Soft Type STGMR Series" that we handle. It has a low surface resistance of 0.06Ω/□ and exhibits excellent shielding effectiveness. This soft type can be sufficiently compressed even with thin metal sheets. Installation to enclosures and other surfaces can be easily done with adhesive tape. Please feel free to contact us if you have any requests. 【Features】 ■ Low surface resistance of 0.06Ω/□ ■ Exhibits excellent shielding effectiveness ■ Soft type that can be sufficiently compressed even with thin metal sheets ■ Easy installation to enclosures and other surfaces with adhesive tape *For more details, please refer to the PDF document or feel free to contact us.

• Other polymer materials
• Other electronic parts

The "SSP-N Series" is a shielded soft packing that can be easily cut, punched, or half-cut into any shape. Due to the electroless plating from the continuous foam holes of the urethane foam to the base non-woven fabric and the upper tricot (jersey), it exhibits very high shielding characteristics. The adhesive on the back of the base is processed in a striped pattern, so there is no conduction loss. 【Features】 ■ Exhibits very high shielding characteristics due to electroless plating ■ No conduction loss due to the striped pattern of the adhesive on the back of the base ■ Good shielding effect can be obtained when compressed ■ Suitable for sealing the seams of enclosures and housings ■ Easy to cut, punch, or half-cut into any shape *For more details, please refer to the PDF materials or feel free to contact us.

• Other polymer materials
• Other electronic parts

The "SSP-TH Series" is an ultra-thin type of shield soft packing that provides sufficient cushioning even with a thin thickness, thanks to the new material of polyolefin foam. It can be easily cut, punched, or half-cut into any shape without generating burrs or fraying during the cutting process. The through-hole sections are plated, which enhances surface conductivity and conductivity in the compression direction. 【Features】 ■ Sufficient cushioning even with a thin thickness due to the new material of polyolefin foam ■ Easy to cut, punch, or half-cut into any shape ■ No burrs or fraying during cutting ■ Plated through-hole sections ■ Excellent surface conductivity and conductivity in the compression direction *For more details, please refer to the PDF document or feel free to contact us.

• Other polymer materials
• Other electronic parts

The "SSP-FRZ Series" is a flame-retardant shield soft packing that provides good shielding effectiveness when compressed during use. The non-woven fabric and top woven fabric based on polyurethane foam are all treated with electroless plating, resulting in very high shielding characteristics. The polyurethane foam is highly flexible, allowing it to fit the shape of the counterpart, making it suitable for conductive treatment and shielding at the seams of enclosures and housings. 【Features】 ■ Successfully improved conventional shield soft packing to have flame-retardant properties ■ Electroless plating is applied to the non-woven fabric and top woven fabric based on polyurethane foam ■ The polyurethane foam is highly flexible, allowing it to fit the shape of the counterpart ■ Suitable for conductive treatment and shielding at the seams of enclosures and housings ■ Good shielding effectiveness is achieved when compressed during use *For more details, please refer to the PDF materials or feel free to contact us.

• Other polymer materials
• Other electronic parts

The "CU Series" is a flexible copper foil tape that makes wrapping and adhering tasks easy. We offer two types with thicknesses of 95μ and 53μ. It is UL510 (FR) certified and can be soldered to metal foil. Additionally, because it uses a conductive adhesive, it does not reduce shielding effectiveness. Please feel free to contact us if you have any inquiries. 【Features】 ■ Easy to wrap and adhere due to its flexibility ■ Does not reduce shielding effectiveness because it uses a conductive adhesive ■ Can be soldered to metal foil ■ Available in two thicknesses: 95μ and 53μ ■ UL510 (FR) certified *For more details, please refer to the PDF document or feel free to contact us.

• Adhesive tape

The "AL Series" is an aluminum foil tape that excels in noise reflection characteristics in the high-frequency range. Its flexibility makes winding and sticking easy. Since it uses a conductive adhesive, it does not reduce shielding effectiveness. We offer two types with thicknesses of 110μ and 58μ. It is suitable as an emergency measure during shielding characteristic measurements. 【Features】 ■ Flexible, making winding and sticking easy ■ Uses a conductive adhesive, so it does not reduce shielding effectiveness ■ Excellent noise reflection characteristics in the high-frequency range ■ Available in two thicknesses: 110μ and 58μ ■ UL510 (FR) certified product *For more details, please refer to the PDF document or feel free to contact us.

• Adhesive tape

The "MCU-T-200 Series" is a masking tape suitable for use in conjunction with Shield Tight. It allows for the omission of the painting process for the enclosure (conductive treatment and rust prevention treatment). After painting, the masking tape can be easily removed from the copper foil surface. Additionally, because it uses a conductive adhesive, it does not reduce the shielding effect. Please feel free to contact us if you have any inquiries. 【Features】 ■ Suitable for use in conjunction with Shield Tight ■ Allows for the omission of the painting process for the enclosure ■ After painting, the masking tape can be easily removed from the copper foil surface ■ Uses a conductive adhesive, so it does not reduce the shielding effect *For more details, please refer to the PDF document or feel free to contact us.

• Adhesive tape

This catalog introduces industrial plastic fastener products handled by Takeuchi Kogyo Co., Ltd. We offer a lineup including the "SN Series," which is suitable for materials requiring heat resistance, and the "FF Series," which has a strong extraction force. We have also included images of the products after insertion, so please use this for selecting the right products. 【Featured Products (Excerpt)】 ■ One-Piece Latch: OPL Series ■ Snap Mini Joint: SMJ-3VOB ■ Nylon Rivet: P Series ■ Push Rivet: RH Series ■ Nylon Rivet: SN Series ■ Push Rivet: F Series *For more details, please refer to the PDF document or feel free to contact us.

• fastener

The "ZN Series" is a ZN shielding tape that exhibits shielding properties equivalent to copper foil tape. It allows for easy half-cut processing and can be used for grounding and shielding packing. Thanks to the unique sacrificial corrosion protection of zinc, it prevents rust caused by contact with dissimilar metals, ensuring corrosion prevention of zinc steel plates and stable contact resistance. 【Features】 ■ Exhibits shielding properties equivalent to copper foil tape ■ Strong tensile strength and flexibility make it easy to wrap and stick ■ Prevents rust caused by contact with dissimilar metals due to zinc's unique sacrificial corrosion protection ■ Ensures corrosion prevention of zinc steel plates and stable contact resistance ■ Allows for easy half-cut processing and can be used for grounding and shielding packing *For more details, please refer to the PDF document or feel free to contact us.

• Adhesive tape

The "TMS-14" is a thermoset that exhibits high effectiveness with excellent thermal conductivity. It is suitable for heat dissipation measures for CPUs, ICs, and power ICs. Additionally, it can accommodate various heat sources. Please feel free to contact us when you need assistance. 【Features】 ■ High effectiveness with excellent thermal conductivity ■ Flexible material that adheres firmly to heat sources ■ Maintains stable physical properties for a long time ■ Reduced siloxane content ■ Uses an easy-to-install protective film ■ Delivered cut to fit the shape of the heat source *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products

The "TMS-43" is a thermoset that maintains stable physical properties for long periods of time. It is suitable for thermal management of power ICs and switching power supplies, among other applications, and can accommodate various heat sources. It can be delivered cut to match the shape of the heat source. Please feel free to contact us when you need assistance. 【Features】 ■ Excellent thermal conductivity for high effectiveness ■ Flexible material that adheres firmly to the heat source ■ Maintains stable physical properties for long periods ■ Reduced siloxane content ■ Uses an easy-to-install protective film *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products

This catalog introduces the industrial plastic fastener products handled by Takeuchi Kogyo Co., Ltd. Starting with the reusable Kiban spacers "RCBS Series" and "RCBT Series," we offer a variety of products, including the "RCAG-7SVOB," which does not require mounting holes on the circuit board. We have also included detailed images of the installation and removal methods, so please use this information to assist in your product selection. [Featured Products (Excerpt)] ■ RCBS Series ■ RCBT Series ■ RCAG-7SVOB ■ RCBG Series ■ RESP-10SVO ■ RWPS-8VO *For more details, please refer to the PDF document or feel free to contact us.

• fastener

The "THS-14" is a suitable product for use as a spacer for fixing heat sinks mounted on a circuit board. It allows for pre-attaching (temporary fixing) to the heat sink. The guide function makes it easy to secure the heat sink to the circuit board. Please feel free to contact us when you need assistance. 【Specifications】 ■Material: PA66 (UL94V-2) ■Color: Black ■Packaging unit: 1,000 pcs. *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• Other safety and hygiene products

The "TMS-22" is a thermistor that firmly adheres to heat sources with its flexible material. It is suitable for heat dissipation measures for CPUs and ICs, as well as thermal management for switching power supplies. Additionally, it can accommodate various heat sources. Please feel free to contact us when you need assistance. 【Features】 ■ Exhibits high effectiveness with excellent thermal conductivity ■ Firmly adheres to heat sources with flexible material ■ Maintains stable properties for an extended period ■ Reduces the amount of siloxane content ■ Uses an easy-to-install protective film ■ Delivered cut to fit the shape of the heat source *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products

The "TMS-US18" is a thermoset that, due to its low hardness, accommodates a wide range of clearances and reduces the burden on the substrate. It is suitable for thermal management of power ICs and switching power supplies. Cutting delivery is possible to match the shape of the heat source. Please feel free to contact us when you need assistance. 【Features】 ■ Low hardness ■ Accommodates a wide range of clearances ■ Reduces the burden on the substrate ■ Reduces the amount of siloxane ■ Cutting delivery is possible to match the shape of the heat source *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products

"TR" is a conductive fabric tape that fits very well on items that are wrapped or adhered. It uses a conductive adhesive, ensuring reliable shielding effectiveness. It is compliant with the RoHS directive and is UL510(FR) certified. Please feel free to contact us when you need assistance. 【Lineup (excerpt)】 ■TR-8 ■TR-13 ■TR-19 ■TR-25 ■TR-40 ■TR-50 *For more details, please refer to the PDF document or feel free to contact us.

• Adhesive tape

"AL-HDB" is a heat diffusion sheet suitable for thermal management in slim IT devices. It combines both thermal management and electromagnetic wave shielding capabilities. With the presence of a PET film, it also has insulation properties. Please feel free to contact us when you need assistance. 【Features】 ■ Ideal for thermal management in slim IT devices ■ Combines both thermal management and electromagnetic wave shielding capabilities ■ Insulation treatment is also possible ■ Custom cutting is available to match the shape of the heat source *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products

We would like to introduce the SM contact 'SM-A364030A' that we handle. The material is beryllium copper, and the recommended usage range is a height of 2.2 to 3.4 mm. This product complies with the RoHS directive and can be used in various electronic devices such as computers, printers, FAX machines, copiers, AV equipment, home appliances, and measuring instruments. Please feel free to contact us when you need assistance. 【Characteristics (excerpt)】 ■ Initial resistance value: 0.05Ω or less ■ Compression load: 2.6N or less ■ High temperature test: 0.05Ω or less ■ Temperature resistance test: 0.05Ω or less ■ Low temperature test: 0.05Ω or less ■ Heat cycle test: 0.05Ω or less *For more details, please refer to the PDF document or feel free to contact us.

• Other metal materials
• Other PCs and OA equipment

"TR-MF" is a non-halogen conductive fabric tape suitable for wrapping around cables, featuring a strong adhesive that is non-conductive. The tightly woven conductive fabric exhibits high shielding effectiveness even in high-frequency bands. Being a non-halogen type, it also complies with RoHS directives, making it environmentally friendly. [Product Lineup (Excerpt)] ■TR-13MF ■TR-19MF ■TR-25MF ■TR-35MF ■TR-40MF ■TR-50MF *For more details, please refer to the PDF document or feel free to contact us.

• Adhesive tape

"No.118CF" is a flame-retardant conductive double-sided adhesive tape that uses copper foil as the substrate and excels in shielding effectiveness in the thickness direction. The adhesive contains a unique blend of metal powder, providing conductivity in the thickness direction. It is made from non-halogen materials and complies with RoHS directives, making it an environmentally friendly product. It also has excellent flame-retardant properties. 【Characteristics】 ■ Product thickness (μm): 147 ■ Product length (m): 100 ■ Effective width of product (mm): 520 ■ Contact resistance value (Ω/25mm□/19.6N): less than 0.01 ■ Adhesive strength (N/25mm width): 15.7 (against SUS) *For more details, please refer to the PDF document or feel free to contact us.

• Adhesive tape
• EMC countermeasure products

The "SM-Z365325-PB" is a suitable SM contact for electronic devices such as computers and printers. The material is phosphor bronze. The recommended usage range is a height of 3.4 to 5.0 mm. This product complies with the RoHS directive. Please feel free to contact us when placing an order. 【Characteristics (excerpt)】 ■ Initial resistance value: 0.05Ω or less ■ Compression load: 5N or less ■ High temperature test: 0.05Ω or less ■ Temperature resistance test: 0.05Ω or less ■ Low temperature test: 0.05Ω or less ■ Heat cycle test: 0.05Ω or less *For more details, please refer to the PDF document or feel free to contact us.

• Other metal materials
• Other PCs and OA equipment

"No.118M" is a conductive double-sided adhesive tape that uses a conductive mesh as its substrate, offering excellent flexibility. The adhesive contains a unique blend of metal powder, providing conductivity in the thickness direction. It is made from materials that comply with non-halogen and RoHS directives, making it an environmentally friendly product. 【Characteristics】 ■ Product thickness (μm): 130 ■ Product length (m): 100 ■ Effective product width (mm): 650 ■ Contact resistance (Ω/25mm□/19.6N): 0.04 or less ■ Adhesive strength (N/25mm width): 10 or more (against SUS) *For more details, please refer to the PDF document or feel free to contact us.

• Adhesive tape
• EMC countermeasure products

The "FH Series" is a vibration isolator with both spring and damper functions. It has excellent corrosion resistance and chemical resistance, a wide operating temperature range (-100 to +260°C), and a variety of load options, making it suitable for a wide range of applications. It can absorb vibrations and shocks in three axes: left-right, front-back, and up-down, and offers four installation methods, making installation easy. 【Features】 ■ Large deflection allows for shock absorption ■ Excellent corrosion and chemical resistance, with a wide operating temperature range ■ Variety of load options available ■ Combines both spring and damper functions ■ Achieves compact and simple vibration control *For more details, please refer to the PDF document or feel free to contact us.

• Anti-vibration, earthquake-proof, vibration-isolating devices

The "SM-485030-I" is an SM contact that can be used for various electronic devices such as computers and printers. The material is phosphor bronze, with a recommended height range of 2.1 to 4.8 mm. It has a nickel plating on the surface and a tin plating treatment on the soldered parts. This product complies with the RoHS directive. Please feel free to contact us when you need assistance. 【Characteristics (excerpt)】 ■ Initial resistance value: 0.05Ω or less ■ Compression load: 0.5N to 1.2N or less ■ High temperature test: 0.05Ω or less ■ Temperature resistance test: 0.05Ω or less ■ Low temperature test: 0.05Ω or less ■ Heat cycle test: 0.05Ω or less *For more details, please refer to the PDF document or feel free to contact us.

• Other metal materials
• Other PCs and OA equipment

The "VCS-05" is an anti-vibration spacer that reduces vibrations transmitted to the circuit board. It can be installed with a single touch, reducing labor time, and compared to anti-vibration bushes, it eliminates the need for sleeves and screws, thereby reducing the number of components. The applicable board thickness is t1.6±0.1mm, and the material used is 12 nylon (UL94HB). Please feel free to contact us if you have any inquiries. 【Features】 ■ Reduces vibrations transmitted to the circuit board ■ Can be installed with a single touch, reducing labor time ■ Eliminates the need for sleeves and screws compared to anti-vibration bushes *For more details, please refer to the PDF document or feel free to contact us.

• Anti-vibration, earthquake-proof, vibration-isolating devices

The "SM-E241512-PB" is an SM contact with nickel plating on the entire surface and tin plating on the soldered parts. The material is phosphor bronze. The recommended usage range is a height of 0.7 to 1.4 mm. This product complies with the RoHS directive. Please feel free to contact us when placing an order. 【Characteristics (excerpt)】 ■ Initial resistance value: less than 0.1Ω ■ Compression load: less than 0.5N ■ High temperature test: less than 0.1Ω ■ Temperature resistance test: less than 0.1Ω ■ Low temperature test: less than 0.1Ω ■ Heat cycle test: less than 0.1Ω *For more details, please refer to the PDF document or feel free to contact us.

• Other metal materials
• Other PCs and OA equipment

The "PTH Series" is a plastic torque hinge that does not use any oil or grease. It is made of resin, ensuring smooth operation with no issues related to resin components. The material used is POM, and it is available in natural (white) and black colors. 【Features】 ■ No issues with resin components as it does not use any oil or grease ■ Smooth operation due to the use of resin ■ Easy to set any desired torque ■ Custom torque hinges can be made according to customer requests *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "GP Series / Sponge Series" is a vibration-damping rubber that can be molded similarly to general rubber. It allows for strong adhesion to metals, and cutting and punching of sheet materials is also acceptable. We also offer a lineup of sponge sheets that cater to weight reduction. This is a vibration-damping sponge with a specific gravity of 0.3 and independent bubbles. 【Features】 ■ Excellent vibration-damping performance at room temperature, with rebound less than 10% ■ Can be molded similarly to general rubber ■ Allows for strong adhesion to metals, and cutting and punching of sheet materials is acceptable ■ A lineup of sponge sheets that cater to weight reduction ■ Vibration-damping sponge with a specific gravity of 0.3 and independent bubbles *For more details, please refer to the PDF materials or feel free to contact us.

• Rubber
• Anti-vibration, earthquake-proof, vibration-isolating devices

The "GBH-1005" is a vibration-damping bush that is suitable as an impact-absorbing material, cushioning material, and vibration-damping material. It has good weather resistance and can be used outdoors. The material used is TPS, and the color is black. Other sizes can be manufactured upon request. Please feel free to contact us when placing an order. 【Features】 ■ Suitable as an impact-absorbing material, cushioning material, and vibration-damping material ■ Good weather resistance, suitable for outdoor use ■ Other sizes can be manufactured upon request *For more details, please refer to the PDF document or feel free to contact us.

• Anti-vibration, earthquake-proof, vibration-isolating devices

We would like to introduce the resin damper 'FPD-1012 series' handled by Takeuchi Kogyo Co., Ltd. There are three model types: A1, A3, and A5, and four types available: S, C, R, and D. The allowable angular deviation is within ±2.5° for S/C/R types, and within ±6° for the D type. The body colors available are white and black. Please feel free to contact us if you have any inquiries. 【Lineup (partial)】 ■FPD-1012A1-S ■FPD-1012A1-C ■FPD-1012A1-R ■FPD-1012A1-D *For more details, please refer to the PDF document or feel free to contact us.

• Anti-vibration, earthquake-proof, vibration-isolating devices
• Plastic bearings

We would like to introduce the "Plas Ashi (One-Touch Leg)" handled by Takeuchi Kogyo Co., Ltd. By changing the rivet dimensions, it can accommodate a wide range of plate thicknesses. Its slim design allows for a reduction in product height. Additionally, we also offer a mini type that can be used in a space-saving manner. Please feel free to contact us when you need assistance. 【Features】 ■Common - Accommodates a wide range of plate thicknesses by changing the rivet dimensions. ■FF Series - Its slim design allows for a reduction in product height. ■FF Series Mini Type - Can be used in a space-saving manner. *For more details, please refer to the PDF document or feel free to contact us.

• plastic
• Other machine elements

We would like to introduce the resin damper 'FPD-0805 series' handled by Takeuchi Kogyo Co., Ltd. The stroke is 5mm, and the piston rod return force is below 6N. The colors of the cylinder caps are as follows: A1 is black, A2 is white, A5 is blue, and A7 is brown. Additionally, the maximum energy absorption, speed range, and maximum load thrust values differ. Please feel free to contact us if you have any inquiries. 【Product Lineup (Partial)】 ■FPD-0805A1-SW ■FPD-0805A1-CW ■FPD-0805A2-SW ■FPD-0805A2-CW *For more details, please refer to the PDF document or feel free to contact us.

• Plastic bearings
• Anti-vibration, earthquake-proof, vibration-isolating devices

The "STH Series" is a SUS torque hinge that does not use any oil or grease. It is made of resin, allowing for smooth operation. It is easy to set any desired torque. We can also create original torque hinges tailored to your requests. Please feel free to consult us when needed. 【Features】 ■ No oil or grease is used, eliminating issues with resin parts ■ Made of resin for smooth operation ■ Easy to set any desired torque ■ Custom original torque hinges can be made to meet customer requests *For more details, please refer to the PDF document or feel free to contact us.

• Resin mold
• Other machine elements

We would like to introduce the resin damper 'FPD-1016 series' handled by Takeuchi Kogyo Co., Ltd. The stroke is 16mm, and the speed range is 15mm/s or less. The piston rod return force is 10N or less, and the main body material is POM. The maximum load thrust is 300N for 'FPD-1016A30-SW' and 400N for 'FPD-1016A40-SW'. 【Lineup】 ■FPD-1016A30-SW ■FPD-1016A40-SW *For more details, please refer to the PDF document or feel free to contact us.

• Plastic bearings
• Anti-vibration, earthquake-proof, vibration-isolating devices

We would like to introduce the resin damper 'FPD-10 series' handled by Takeuchi Kogyo Co., Ltd. For the 'FPD-1030A1', the stroke is 30mm, and the impact mass is 10kg. The thrust is 6N, and the impact speed is 0.3m/s. Additionally, we offer strokes of 50, 60, and 70mm, with the main body and cap made of POM, and a temperature range of 5 to 40°C. 【Lineup (partial)】 ■FPD-1030A1-W ■FPD-1030A2-W ■FPD-1030A3-W ■FPD-1030B1-W ■FPD-1030B2-W ■FPD-1030B3-W *For more details, please refer to the PDF document or feel free to contact us.

• Plastic bearings
• Anti-vibration, earthquake-proof, vibration-isolating devices

We would like to introduce the rotary damper 'FRT-G2 series' handled by Takeuchi Kogyo Co., Ltd. The rotation direction is bidirectional, with a maximum operating rotation speed of 50 rpm, and the operating temperature range is 0 to 50°C. You can choose between gearless and geared options. The material for the main case and cap is polycarbonate (PC), while the rotating shaft and gears are made of polyacetal (POM). 【Lineup (partial)】 ■FRT-G2-200 ■FRT-G2-200G1 ■FRT-G2-200G2 ■FRT-G2-200G3 *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• gear

We would like to introduce the resin dampers 'FPD-1006/1008 series' handled by Takeuchi Kogyo Co., Ltd. The stroke of the "FPD-1006A3-SW" is 6mm, with a maximum energy absorption of 0.3J. The speed range is below 0.5m/s, and it has self-recovery. Additionally, we also offer the "FPD-1008B15-CW," which has a stroke of 8mm, a speed range of 20mm/s or less, and no self-recovery. 【Product Lineup (Partial)】 ■FPD-1006A3-SW ■FPD-1006A3-CW ■FPD-1006A5-SW ■FPD-1006A5-CW ■FPD-1006A8-SW ■FPD-1006A8-CW *For more details, please refer to the PDF document or feel free to contact us.

• Plastic bearings
• Anti-vibration, earthquake-proof, vibration-isolating devices

We would like to introduce the resin damper 'FPD-1018 series' handled by Takeuchi Kogyo Co., Ltd. There are three types: S, C, and R. The stroke for S/C is 18mm, and for R it is 17mm. The maximum energy absorption is 1.2J for "A15" and 0.5J for "A20." Additionally, the speed range is below 0.5m/s, and the piston rod return force is below 6N. The operating temperature range is 5 to 40°C. 【Lineup】 ■ FPD-1018A15-SW ■ FPD-1018A15-CW ■ FPD-1018A15-RW ■ FPD-1018A20-SW ■ FPD-1018A20-CW ■ FPD-1018A20-RW *For more details, please refer to the PDF document or feel free to contact us.

• Plastic bearings
• Anti-vibration, earthquake-proof, vibration-isolating devices

The "RCBS Series" is a space-saving design reusable Kiban spacer that keeps the protrusion on the chassis bottom surface to 1mm. The snap design makes stacking easy, and removing the circuit board is also simple. We offer two products with different spacing heights: "RCBS-9S" and "RCBS-16S." Please feel free to contact us when you need them. 【Specifications (Excerpt)】 ■ Applicable board thickness - Circuit board side: t1.5mm to t2.0mm - Chassis side: t0.8mm to t2.0mm ■ Material/Color: 66 Nylon UL94V-0 certified/Natural (white) ■ Environmental measures: Compliant with RoHS directive *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

We would like to introduce the rotary damper 'FRT-E2/E9 series' handled by Takeuchi Industrial Co., Ltd. The rotation direction is bidirectional, with a maximum operating rotation speed of 50 rpm and a maximum cycle of 10 cycles/min. The oil used is silicone oil. The type of gear is standard spur gear, with the reference pitch circle diameter being "G1 (for E2)" at φ6 and "G2 (for E9)" at φ6.6. 【Lineup (partial)】 ■FRT-E2-100G1 ■FRT-E9-100G2 ■FRT-E2-200G1 ■FRT-E9-200G2 *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• gear

We would like to introduce the rotary dampers, 'FRT/FRN-C2 series', handled by Takeuchi Engineering Co., Ltd. The 'FRT' model has a bi-directional rotation, and the rotation axis is made of polyacetal. The 'FRN' model allows you to choose between clockwise or counterclockwise rotation, and its rotation axis is made of metal. As for the gear specifications, the type is standard spur gear, and the tooth profile is involute straight tooth. The module is 0.8, and the pressure angle is 20°. 【Lineup (partial)】 ■FRT-C2-201 ■FRT-C2-201G1 ■FRT-C2-301 ■FRT-C2-301G1 ■FRT-C2-451 ■FRT-C2-451G1 *For more details, please refer to the PDF document or feel free to contact us.

• gear
• Other machine elements

The "RCAG-7SV0B" is a spacer that does not require mounting holes on the circuit board. It completely hides the mounting holes and prevents light leakage, dust, and small insects from entering through the holes. It features a space-saving design that keeps the protrusion on the chassis bottom to 1mm. Please feel free to contact us when you need assistance. 【Specifications (excerpt)】 ■Applicable board thickness: t0.5mm to t1.6mm ■Material/Color: 66 Nylon UL94V-0 certified/Black ■Environmental measures: Compliant with RoHS directive *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

We would like to introduce the rotary damper 'FRT/FRN-D3 series' handled by Takeuchi Industrial Co., Ltd. The "FRT-D3-501" has a bidirectional rotation without gears. The maximum operating speed is 50 rpm, and the cap color is gray. In addition, we have a wide range of products available, including the "FRN-D3-R501," which has a clockwise rotation direction, a metal rotation axis, and a black cap color. 【Product Lineup (Partial)】 ■FRT-D3-501 ■FRT-D3-501G1 ■FRT-D3-102 ■FRT-D3-102G1 ■FRT-D3-152 ■FRT-D3-152G1 *For more details, please refer to the PDF document or feel free to contact us.

• gear
• Other machine elements

The "RESP-10SV0" is a space-saving design reusable edge support that keeps the chassis bottom surface protrusion to 2.8mm. The mounting direction can be determined based on the orientation of the mounting holes. When removing the circuit board, the auxiliary mechanism attached to the arm pushes the board up, allowing for easy removal. 【Specifications (excerpt)】 ■Applicable board thickness - Circuit board side: t1.6mm - Chassis side: t0.5mm to t1.6mm ■Material/Color: 66 Nylon UL94V-0 certified/Natural (white) ■Environmental measures: Compliant with RoHS directive *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements