篠原電機 List of Products and Services

The "Hock Tube" is a wiring bundling material that allows for easy bundling work by wrapping electrical wires and securing them with a hook. 【Features】 1. You can easily bundle wires by wrapping them with the Hock Tube and securing them with a hook. 2. It is highly flexible, making it easy to change wiring, inspect, and maintain. Additionally, branch wires can be accessed from anywhere. 3. It can be cut to any desired length, making it economical and eliminating waste. *For more details, please refer to the catalog or feel free to contact us.*

Please use this for measures against equipment corrosion and electrical system troubles due to salt damage at various facilities and factories in coastal areas. 【Features】 1. Low pressure loss. 2. High collection efficiency for sea salt particles. 3. Long lifespan. 4. Even if the collected sea salt particles on the filter media deliquesce, the increase in pressure loss is low. 5. Even if the collected sea salt particles on the filter media deliquesce, the outflow to the downstream and re-dispersion is very minimal. 6. Excellent impact resistance. *For more details, please refer to the catalog or feel free to contact us.

【Features】 1. Excellent gas decomposition performance achieved through a uniquely developed photocatalytic filter. 2. The gas decomposition capability of the photocatalytic filter is restored by washing with water and air drying. 3. No need for filter replacement, making it environmentally friendly and gentle on the Earth. 【Applicable Corrosive Gases】 - Hydrogen sulfide (H2S) - Sulfur dioxide (SO2) - Nitrogen oxides (NOx) For more details, please refer to the catalog or feel free to contact us.

【Features】 【Iron Type】 1. We have added an iron type that offers excellent cost performance. This expands the range of options alongside the traditional brass type. 2. It complies with the standards set by the Ministry of Land, Infrastructure, Transport and Tourism. 【Embedded Screw Type】 1. Flat washers and S washers are incorporated into the screws. (P=3 sem type) 2. It is a hex up-set type that can be tightened with a Phillips screwdriver. 3. The BECX-5S-10 has a shorter neck length than the conventional embedded screw type green bolt, making it ideal for wiring such as ground bosses. *For more details, please refer to the PDF document or feel free to contact us.

A new model has been added to the open/close button cover! Thanks to its hinge design, it's easy to operate buttons and switches! You can choose from two sizes and two colors! 【Features】 1. Installation is done by securing it together with the button or switch, so it won't fall off when opening or closing the cover. 2. It is compatible with buttons and switches with a diameter of approximately φ40 and a projection of about 30mm from the panel. 3. Depending on the intended use, you can differentiate with the cover colors. (Available in two colors: translucent white and translucent red) *For more details, please refer to the PDF document or feel free to contact us.

It can be used as a relay connector box for data communication with PLCs (programmable logic controllers) housed in control panels and similar equipment. With the front cover closed, it has an IP55 rating, preventing dust and water from entering the panel. Additionally, it employs a locking type outlet to prevent accidental disconnection of the power plug. Trial operation adjustments can be made without opening the doors of the control panel. 【Features】 ■ Compliant with RoHS directive ■ Dustproof and waterproof type IP55 ■ Access to internal mechanisms with miniB terminal connection ■ Uses a locking type outlet ■ Allows trial operation adjustments without opening the doors of the control panel *For more details, please refer to the PDF document or feel free to contact us.

This is a non-combustible sheet material with a special formulation of PVC resin applied to a glass fiber base, and it is highly flexible, making inspection and maintenance easy. Additionally, branch lines from cable wiring or changes can be accessed from anywhere. It can be cut to any length for use, making it economical with no waste. 【Features】 1. By wrapping electrical wires with a hook tube and securing the hook, bundling cables and pipes becomes easy. 2. It is a non-combustible sheet material with a special formulation of PVC resin applied to a glass fiber base. 3. Its high flexibility allows for easy inspection and maintenance, and branch lines from cable wiring or changes can be accessed from anywhere. 4. It can be cut to any length for use, making it economical with no waste. 5. Due to its high weather resistance, it can be used outdoors. *Please avoid using it in environments where water can enter from the bundling area, as it is not a sealed structure (such as underwater use or in outdoor orientations where rainwater can enter). *For more details, please refer to the PDF materials or feel free to contact us.

【Features】 【Compatibility】Suitable mounting pitch for switching from 10W and 20W fluorescent lamps is 280mm/538mm. 【Lightweight】It is lightweight as it does not use metal or glass, making it safe from transport vibrations and installation shocks. 【Compact】With a compact and simple design, it helps save space within the panel. 【Voltage Resistance】It has a voltage resistance performance of AC2000V/min, suitable for use within panels. 【Energy Saving】The power consumption is about half compared to conventional fluorescent lamps. 【ECO】It is a clean lighting solution that does not use mercury. 【Low Heat Generation】It does not get as hot as fluorescent lamps, ensuring safety. 【Insect Repellent】It emits very little ultraviolet light, preventing pests from being attracted to the panel and its surroundings, thus blocking their intrusion. *For more details, please refer to the materials. Feel free to contact us with any inquiries.

The "Free Baseboard" is a mounting plate for mid-plates such as distribution and control panels, as well as other equipment. Since equipment can be mounted using only the distribution diagram, the sheet metal drawings for mid-plates and similar components can be omitted. It can be manufactured according to design dimensions, and when changes or expansions occur, it is only necessary to add this product, eliminating the need for drilling and other modifications. Furthermore, assembly wiring can be done in a separate process from the outer casing, allowing for shortened delivery times. 【Features】 ■ Can be manufactured according to design dimensions ■ Equipment can be mounted using only the distribution diagram ■ No need for drilling or modifications during changes or expansions ■ Assembly wiring can be done in a separate process from the outer casing ■ Delivery times can be shortened *For more details, please refer to the PDF materials or feel free to contact us.

"Freenut" is a mounting nut that can be easily attached from the surface side of the "free circuit board" with a single touch. All equipment installation can be done from the front side without having to reach around to the back. It is an environmentally friendly product finished with trivalent chrome treatment on electro-galvanized steel. 【Features】 ■ One-touch attachment ■ Can be done from the surface side ■ Environmentally friendly product finished with trivalent chrome treatment on electro-galvanized steel *For more details, please refer to the PDF document or feel free to contact us.

The "Jura Con Spacer" is a post used for mounting and supporting printed circuit boards, connectors, acrylic covers, and more. It has excellent insulation properties, is lightweight, and easy to handle. It comes with a nickel-plated finish and is available in hexagonal types "BS type" and "AS type," as well as round types "BR type" and "AR type." 【Features】 ■ Excellent insulation properties ■ Lightweight and easy to handle ■ Nickel-plated finish ■ Available in hexagonal and round types *For more details, please refer to the PDF document or feel free to contact us.

The "KS Mini Post" is a post used as an insulation support. It has excellent insulation properties and a dielectric strength of AC2000V for 1 minute. The material is ABS (black). 【Features】 ■ Excellent insulation properties ■ Dielectric strength AC2000V for 1 minute ■ Material: ABS (black) with 2 M3 brass screws included *For more details, please refer to the PDF document or feel free to contact us.

The "Distribution Board Post (Decorative Screw)" is a mounting bracket that allows for the height adjustment of the inner plate (decorative plate) of the distribution board. By attaching the inner plate (screw-fixed) to the CP type post (hinge post) and installing the UP type post (receiving post) on the opposite side, the complex installation work of the inner plate becomes easier and more efficient. The height can be freely adjusted from 64mm to 250mm. Additionally, it features an environmentally friendly electric zinc plating with trivalent chromate treatment. 【Features】 ■ Easy installation ■ Height adjustable from 64mm to 250mm ■ Environmentally friendly electric zinc plating with trivalent chromate treatment *For more details, please refer to the PDF document or feel free to contact us.

The "Flat Post" is a mounting bracket for adjusting the height of equipment installation within a panel. Adjustment and fine-tuning can be easily done even after preliminary installation of the equipment. It is made of steel plate and finished with environmentally friendly trivalent chrome electro-galvanizing. 【Features】 ■ Easy adjustment and fine-tuning even after preliminary installation ■ Environmentally friendly trivalent chrome electro-galvanized finish *For more details, please refer to the PDF document or feel free to contact us.

The "Fastener Tube" is a product used for the protection of wire bundling in distribution boards, labor-saving equipment, machine wiring, electrical work, etc. Bundling work can be easily performed using a dedicated slider. Since attachment and removal are easy, inspection and maintenance time can be significantly reduced. It can be cut to any desired length, making it economical with no waste. Due to its full contact design, dust and oil do not enter the tube. It is particularly excellent in insulation, flame resistance, and flexibility. 【Features】 ■ Easy bundling work using a dedicated slider ■ Easy attachment and removal ■ Significant reduction in maintenance time ■ Economical with no waste as it can be cut to size ■ Prevents dust and oil from entering the tube ■ Particularly excellent in insulation, flame resistance, and flexibility *For more details, please refer to the PDF document or feel free to contact us.

The "Wrapping Tube (Reversible Type)" is a product used for protecting wires in distribution boards, labor-saving devices, machine wiring, electrical work, and more. It excels in weather resistance, chemical resistance, and flexibility, and since the sheet colors are different on each side (gray and black), you can choose colors according to your application. It uses quick tape, allowing for easy opening and closing. Partial opening is also possible, enabling wire branching. Additionally, the full contact prevents dust and oil from entering the tube. No tools are required, making bundling work, wire changes, and inspections easy. 【Features】 ■ Different sheet colors on each side for versatile use ■ Quick tape allows for easy opening and closing ■ No tools required for bundling work, wire changes, and inspections ■ Partial opening is possible, allowing for wire branching ■ Prevents dust and oil from entering the tube ■ Excellent weather resistance, chemical resistance, and flexibility *For more details, please refer to the PDF document or feel free to contact us.

The "Cable Tie Fastener" is a product used as a fastener for cable ties. The material is made of 66 nylon in a milky white color. We offer three types of fasteners: A, B, and C. 【Features】 ■ Fastener for cable ties ■ Made of 66 nylon in milky white color (UL-94, V-2) ■ Available in three types: A, B, and C ■ Packaging: 100 pieces per bag *For more details, please refer to the PDF document or feel free to contact us.

The "Wiring Duct" from Shinohara Electric is a UL-certified product that complies with the combustion test of the Japan Railway Vehicle Mechanics Association. In addition to the N type, which has no side holes (wiring outlet holes) or mounting holes, we offer various types of wiring outlet holes, including L type, C type, I type, and separator type. A duct cover is also included. 【Features】 ■ Complies with the combustion test of the Japan Railway Vehicle Mechanics Association ■ UL-certified product ■ Type N available with no side holes or mounting holes ■ Duct cover included *For more details, please refer to the PDF materials or feel free to contact us.

The "Eco Duct (ED Series)" is a product that adopts non-halogen resin, which does not produce harmful gases during incineration, with consideration for the environment. Its flame retardancy is certified as UL94V-0 self-extinguishing, and the ED duct has superior heat resistance compared to conventional PVC. Its specific gravity is approximately 20% lighter than PVC. It adopts the standard colors of the Japan Electrical Distribution Equipment Manufacturers' Association and the Japan Electrical Manufacturers' Association, and the side openings of the ED duct have a chamfered finish on the inner surface. 【Features】 ■ Environmentally friendly ■ No harmful gases produced during incineration ■ Uses non-halogen resin ■ UL94V-0 certified self-extinguishing ■ Approximately 20% lighter than PVC *For more details, please refer to the PDF materials or feel free to contact us.

The "Shield Filter (Electromagnetic Wave Prevention Filter)" is a product used as an air filter and ventilation panel that has electromagnetic wave prevention effects. It is designed in a cassette type, making installation and removal easy. Since it is made entirely of aluminum, it is lightweight and has excellent corrosion resistance and durability. Additionally, it can be cleaned with air brushing or washing, allowing for optimal maintenance of filter performance. 【Features】 ■ Electromagnetic wave prevention effect ■ Easy installation and removal with cassette type ■ Lightweight due to the use of all aluminum materials ■ Excellent corrosion resistance and durability ■ Can be cleaned with air brushing or washing *For more details, please refer to the PDF document or feel free to contact us.

"PET sound-absorbing material" is a safe product that does not cause discomfort to workers and is easy to recycle, even when burned. It has high heat resistance and flame retardancy, equivalent to UL94 HBF. It is intermediate between GW and polyurethane foam, with strong resistance to ultraviolet rays and hydrolysis. Additionally, it can be manufactured in any size. 【Features】 ■ Environmentally friendly ■ High heat resistance and flame retardancy ■ Strong resistance to ultraviolet rays and hydrolysis ■ Can be manufactured in any size *For more details, please refer to the PDF document or feel free to contact us.

The "Steel Plate Instrument Window Frame (SN Type) IP55" is excellent in weather resistance and aesthetics, enhancing the value of the installed products. It is lightweight and easy to install, which improves work efficiency. We offer two types: steel plate and stainless steel, so you can choose according to your application. 【Features】 ■ Lightweight ■ Easy to install ■ Improved work efficiency ■ Available in steel plate or stainless steel ■ IP55 *For more details, please refer to the PDF document or feel free to contact us.

The "Resin (PP) Instrument Window Frame (PY Type) IP55" has excellent weather resistance and a beautiful finish, enhancing the value of the product. It is easy to install; simply drill a hole of the cut dimensions in the panel, insert the instrument window frame from the front, and secure it with screws from the back using the included parts. Due to its waterproof structure, it can be used for outdoor applications. Additionally, we also offer PVC instrument window frames for indoor use. 【Features】 ■ Resin material: PP, PVC ■ Easy installation ■ Waterproof structure IP55 (PY Type) ■ Excellent weather resistance and beautiful finish *For more details, please refer to the PDF document or feel free to contact us.

The "Blank Panel" is a product used for cutting spare panels for various meters and equipment, as well as for covering unnecessary panel cuts. It is sized to fit meters from various manufacturers. The material is made of steel plate and finished with black paint. 【Features】 Sized to fit meters from various manufacturers. *For more details, please refer to the PDF document or feel free to contact us.*

Shinohara Electric Co., Ltd.'s "Air Filters" come in a wide variety of types according to usage conditions, and sizes can also be specified as desired. Orders for cassette types (custom sizes, aluminum filter frames) are also possible. 【Main Features of the Filters】 【Firedon】 This is a non-directional fiber aggregate air filter with low pressure loss and high dust collection capacity, which is non-flammable and unaffected by humidity (compliant with JIS L-1091 category 3). There are also types that can be regenerated through washing. 【Malt Filter】 Due to the freedom to choose density (number of cells, 8 to 50 per 25mm) and thickness (5 to 30mm) based on application, it is ideal for commercial packages, etc. It is relatively easy to regenerate through washing. 【Saran Honeycomb】 This filter is woven from Saran fibers in a screen-like structure, making it optimal for outlet and fan coil filters. It has excellent washability and is easy to regenerate due to its lack of water absorption and moisture retention. *For more details, please refer to the PDF materials or feel free to contact us.*

The "Cassette Filter CSF Type" is a dust-proof filter for ventilation areas such as distribution boards and control panels. Since it is in a cassette form, it can be easily installed and removed. Additionally, the filter frame is made of aluminum, making it lightweight, rust-free, and washable. 【Features】 ■ Its cassette design allows for easy installation and removal. ■ The aluminum frame makes it lightweight, rust-free, and washable. *For more details, please refer to the PDF document or feel free to contact us.

【Features】 A low-pressure loss type utilizing a paper honeycomb core as a spacer. GG … Activated carbon with suitable adsorption strength and particle size can be selected based on the type and concentration of the gas to be adsorbed. T-B … Excellent for the removal of basic gases such as ammonia and trimethylamine. G-H … Excellent for the removal of acidic gases such as hydrogen sulfide and mercaptans. AD (TF) … Effective for the removal of acetaldehyde and formaldehyde. *For more details, please refer to the PDF document or feel free to contact us.

The "CNP Filter" is a product that employs a micro demister made from long fibers of several tens of micrometers, which are carved from stainless steel foil using a special cutting method, needle punched, and compressed with rollers. Additionally, by using all stainless steel materials, it possesses ultra-high temperature resistance, chemical resistance, and corrosion resistance, while achieving high efficiency and high oil retention due to its fiber diameter and porosity. As media, we have prepared three types: a standard type with a fiber diameter of 25μm, a density gradient type (standard) combining fiber diameters of 50μm and 25μm, and a density gradient type (high performance) combining fiber diameters of 50μm and 10μm. 【Features】 ■ Usable in high-temperature environments (heat resistance up to 480℃) ■ Excellent corrosion resistance ■ Achieves high efficiency by lowering porosity through compression ■ Minimizes fiber shedding during use or cleaning *For more details, please refer to the PDF document or feel free to contact us.

The "stainless steel window frame" is a product used for inspection windows in receiving panels, distribution panels, control panels, instrument panels, etc. Installation is extremely simple; you can fit the window frame into the panel hole from the front and secure it with a backing frame and nuts from the back. Being made of stainless steel, it has excellent corrosion resistance. It features a waterproof structure, making it suitable for outdoor use. We can also produce UV-cut film specifications and wired glass (6.8mm) specifications. We accept orders for special sizes, so please feel free to consult with us. 【Features】 ■ Extremely easy to install ■ Excellent corrosion resistance due to stainless steel construction ■ Waterproof structure allows for outdoor use (IP55) ■ Production of UV-cut film specifications is also possible ■ Wired glass (6.8mm) specifications can also be produced ■ Orders for special sizes are also possible *For more details, please refer to the PDF materials or feel free to contact us.

The "Rubber Window Frame (GMY Type) IP55" is a product used for reading and confirming windows in receiving panels, distribution panels, control panels, instrument panels, etc. Installation is extremely simple, and there is no need to use a retaining frame as in the past. The rubber window frame is fitted into the panel cut from the front and can be installed by simply securing it with screws from the back. Additionally, since there are no seams in the main body of the window frame, there are no restrictions on the installation direction. It has a waterproof structure, making it suitable for outdoor use as well. 【Features】 ■ High cost-performance rubber molded product ■ Extremely easy to install ■ No retaining frame required as in the past ■ No restrictions on installation direction (no distinction between vertical and horizontal) ■ Usable for outdoor applications due to waterproof structure (IP55) *For more details, please refer to the PDF document or feel free to contact us.

The "Rubber Instrument Window Frame (MG Type) IP54" is an easy-to-install window frame that improves work efficiency. It is a round type with a panel cut size of φ133. We offer both wire mesh and reinforced types of window glass. 【Features】 ■ Easy to install ■ Improved work efficiency ■ Round type ■ Panel cut size: φ133 ■ IP54 *For more details, please refer to the PDF document or feel free to contact us.

The "Small Door with Window Frame IP55: MD-AY-2020KT (Made to Order)" is used as a small door for operation in control panels, operation panels, cubicles, etc. 【Features】 1. It combines a small door for operation with a window frame, allowing visibility of internal instruments and operation of internal devices without opening the main door of the panel. 2. Installation is easy. It can be fitted into the panel hole from the front and secured with a backing frame and nuts from the back. 3. There is no need to weld to the panel door, which prevents warping of the door and improves work efficiency. 4. It can also be used for outdoor panels. (IP55) 5. Custom sizes can be ordered. Please consult us. *For more details, please refer to the PDF document or feel free to contact us.

The "Cable Entry Clamp" is a product used to support electrical wires at the cable entry points of various panels. The work is completed simply by sandwiching the wire inserted from the entry point with a packing and securing the main body to the enclosure with screws. Since there is no need to use filling materials as in the past, work efficiency is improved. The new compact and simple structure product "Cable Entry Clamp (DK-SE-10)" can also be used for wire introduction. 【Features】 ■ Easy wire support ■ Wide cable entry for excellent workability ■ No need to use filling materials as in the past ■ Improved work efficiency ■ Prevents the intrusion of dust and debris from the outside *For more details, please refer to the PDF document or feel free to contact us.

The "One-Touch Terminal Cover DLSC-1" can be used as a terminal protection cover for limit switches (panel-mounted type). It does not require mounting screws and can be attached and detached with one touch, providing excellent workability and maintainability. There is a hole on the back side for tester probes, allowing for wiring checks while the cover is attached. Additionally, we also offer the ABC part "DSK-85," which is suitable for mounting limit switches. 【Features】 ■ No mounting screws required; can be attached and detached with one touch ■ Excellent workability and maintainability ■ Wiring checks can be performed while the cover is attached *For more details, please refer to the PDF document or feel free to contact us.

The "Drawing Holder" can be used to store drawings and specifications for distribution boards, cubicles, control panels, operation panels, etc., within the panel. It is suitable for storage as it is transparent and allows for easy visibility of the contents, and it also has excellent aesthetics. It is lightweight and safe, with no risk of breaking, making it easy to handle. Installation is simple as it can be attached with double-sided adhesive tape. Additionally, there are guide holes for screws, allowing for screw fastening as well. 【Features】 ■ Transparent and allows for easy visibility of contents ■ Excellent aesthetics ■ Safe and easy to handle ■ Easy installation with double-sided adhesive tape ■ Screw fastening is also possible *For more details, please refer to the PDF document or feel free to contact us.

It can be used as a cover to prevent accidental operation of push buttons and operation switches. The resin cover comes with a magnet, making it easy to attach and detach. 【Features】 ■ Cover to prevent accidental operation of push buttons and operation switches ■ Comes with a magnet on the resin cover ■ Easy to attach and detach *For more details, please refer to the PDF document or feel free to contact us.

The "Drawing Bag" can be used as a storage bag to keep drawings and specifications for distribution boards, cubicles, control panels, operation panels, etc., within the panel. It is suitable for storage as it is transparent and allows for easy visibility of the contents, and it also has an excellent aesthetic appearance. The buckle design makes it easy to open and close. The top cover helps prevent dust and other contaminants. Additionally, it comes with a spare card holder, which can be used for the administrator's business cards. 【Features】 ■ Transparent for easy visibility of contents ■ Excellent aesthetic appearance ■ Easy to open and close due to the buckle design ■ Top cover prevents dust and other contaminants ■ Includes a spare card holder *For more details, please refer to the PDF document or feel free to contact us.

【Features】 ■ The resin cover has a magnet attached, making installation and removal easy. SWCK-90 (Compact Type) 1. The resin cover has a magnet attached, making installation and removal easy. 2. It is almost the same size as the conventional model (SWC-90), but the coverage area has been expanded. 3. The adhesion strength of the neodymium magnet reduces the likelihood of the cover shifting or falling off due to accidental contact. 4. Each side has a 30mm wide notch, allowing it to bypass simulated busbars. SWC-60 The height has been reduced compared to the conventional model, making it suitable for cam switches with a depth of 50mm. SWC-74K 1. The resin cover has a magnetic catch attached, making installation and removal easy. 2. It has been made more compact compared to the conventional model and is sized to fit approximately 55mm square escutcheons. 3. A push-in spacer can be installed in the center, helping to prevent forgetting to push it in after pulling the handle. *For more details, please refer to the PDF document or feel free to contact us.

The "Space Heater with Heat Dissipation Cover" is a space heater equipped with a heat dissipation cover, designed for use to prevent condensation and humidity inside the panel. It is made by incorporating a space heater into a heat dissipation cover made of punched steel plate, allowing for easy installation with two or four screws. It is designed and manufactured to be extremely safe, ensuring that there is no risk of direct contact with the heat source. 【Features】 ■ Incorporates a space heater into the heat dissipation cover ■ Easy to install ■ Safe design that prevents direct contact with the heat source *For more details, please refer to the PDF materials or feel free to contact us.

It can be used as a heater to prevent condensation and reduce humidity inside the panel. A terminal block is incorporated into the wire connection part, making work easy. 【Features】 ■ Heater for preventing condensation and reducing humidity inside the panel ■ Terminal block incorporated into the wire connection part ■ Easy to work with ■ Terminal block: Rated 600V/25A, made of polycarbonate *For more details, please refer to the PDF document or feel free to contact us.

The "Space Heater" is a product that can be installed inside various panels to prevent condensation and humidity. It can also be used as a heating device or an open duct heater for drying purposes. The heating element is fixed by wrapping electric heating alloy wire around a mica plate, which is then sealed with either zinc-coated steel plate (chrome-free) or stainless steel plate. 【Features】 ■ Prevents condensation and humidity inside various panels ■ Heating element is fixed by wrapping electric heating alloy wire around a mica plate ■ Sealed with zinc-coated steel plate (chrome-free) or stainless steel plate *For more details, please refer to the PDF document or feel free to contact us.

The "Thermostat PTSC-090S" can be used for temperature control (turning the power on and off) of space heaters, ventilation fans, and more. It can be mounted on a DIN rail (it can be installed at the center of the thermostat body). In addition, we also offer the "TS-120S," which allows for continuous and stepless temperature adjustment from 0 to 120°C using a dial, and the "ITS-050L." *For more details, please refer to the PDF document or feel free to contact us.

The "Push Button Cover Mounting Base" is a product used as an attachment when you want to install our push button cover "SWC-88" on a non-magnetic housing such as SUS304. Since it is installed by being fastened together with the equipment, no additional processing is required. We offer three types of hole diameters to match the size of the button. The area between the bracket and the panel surface is protected by an acrylic plate, so the magnet of the bracket and the push button cover does not come into direct contact with the panel surface. It protects not only non-magnetic housings but also existing panels and painted surfaces of steel panels from scratches. 【Features】 ■ The bracket is made of ferrite stainless steel (SUS430) ■ No additional processing is required as it is installed by being fastened together with the equipment ■ Three types of hole diameters are available to match the size of the button ■ The area between the bracket and the panel surface is protected by an acrylic plate *For more details, please refer to the PDF document or feel free to contact us.

【Features】 1. The grip section is designed with curves to fit comfortably in the hand when held. 2. It has a height that accommodates four fingers of an average adult male, making it very easy to grip. *For more details, please refer to the PDF document or feel free to contact us.

【Features】 1. The space heater (terminal block type) that has been loved for years has been significantly downsized! It is suitable for compact control panels and operation panels. 2. It also contributes to space-saving in various other panels. 3. It comes with a cover made of punched steel plate to prevent any risk of direct contact with the heat source. 4. It is equipped with a terminal block as standard, making it easy to connect power lines. *For more details, please refer to the PDF document or feel free to contact us.