篠原電機 List of Products and Services

The "Plastic Gallery GPC Series" is a ventilation opening component for control panels and communication panels. It can be easily attached to the panel opening with a single touch, improving work efficiency. Additionally, it can be continuously installed in both vertical and horizontal directions, enhancing aesthetics and increasing the product value of the panel. We also offer types that can be attached to round hole panel cuts and front-opening plastic galleries. 【Features】 - Can be attached to the panel opening with a single touch - Can be continuously installed in both vertical and horizontal directions - Excellent aesthetics, enhancing the product value of the panel - Easy filter replacement by removing the front gallery - Compatible with 92mm, 120mm, and 160mm fans *For more details, please refer to the PDF document or feel free to contact us.

"ABC Channel (Angle)" is a structural material for panels such as distribution boards, sub-distribution boards, control panels, operation panels, and cubicles. It can be installed without drilling holes in equipment or components, and by using this product, the middle plate can be omitted, reducing the number of processes. Please use it as support hardware for mounting equipment, ducts, wires, busbars, piping, etc. [Features] - Design changes, expansions, and modifications can be made freely - Shortening of delivery times is achievable - Assembly wiring can be done without waiting for the completion of the enclosure - Easy-to-use ABC parts are available, which can improve efficiency *For more details, please refer to the PDF materials or feel free to contact us.

The "ABC Channel (Channel)" is a structural material for panels such as distribution boards, sub-distribution boards, control panels, operation panels, and cubicles. It can be installed without drilling holes in equipment or components, and by using this product, the middle plate can be omitted, reducing the number of processes. Please use it as a support hardware for mounting equipment, ducts, wires, busbars, piping, etc. 【Features】 ■ Design changes, expansions, and modifications can be made freely ■ Shortening of delivery times can be achieved ■ Assembly wiring can be done without waiting for the completion of the enclosure ■ Easy-to-use ABC parts are available, improving efficiency *For more details, please refer to the PDF materials or feel free to contact us.

The "ABC Channel (Flat Bar)" is a structural material for panels such as distribution boards, sub-distribution boards, control panels, operation panels, and cubicles. It can be installed without drilling holes in equipment or components, and by using this product, the middle plate can be omitted, reducing the number of processes. Please use it as support hardware for mounting equipment, ducts, wires, busbars, piping, etc. 【Features】 ■ Design changes, expansions, and modifications are completely flexible ■ Shorter delivery times can be achieved ■ Assembly wiring can be done without waiting for the completion of the enclosure ■ Easy-to-use ABC parts are available, improving efficiency *For more details, please refer to the PDF materials or feel free to contact us.

The "ABC Channel (CC)" is a structural material for panels such as distribution boards, control panels, operation panels, and cubicles. It can be installed without drilling holes in equipment or parts, and by using this product, the middle plate can be omitted, reducing the number of processes. Please use it as a support hardware for mounting equipment, ducts, wires, busbars, piping, etc. 【Features】 ■ Design changes, expansions, and modifications are freely possible ■ Shortening of delivery times can be achieved ■ Assembly wiring can be done without waiting for the completion of the enclosure ■ Easy-to-use ABC parts are available, improving efficiency *For more details, please refer to the PDF materials or feel free to contact us.

The "ABC Channel (CL)" is a structural material for panels such as distribution boards, control panels, operation panels, and cubicles. It can be installed without drilling holes in equipment or parts, and by using this product, you can eliminate the need for a middle plate, thus reducing the number of processes. Please use it as support hardware for mounting equipment, ducts, wires, busbars, piping, etc. 【Features】 ■ Design changes, expansions, and modifications are completely flexible ■ Shorter delivery times can be achieved ■ Assembly wiring can be done without waiting for the completion of the enclosure ■ Easy-to-use ABC parts are available, which can improve efficiency *For more details, please refer to the PDF materials or feel free to contact us.

The "ABC Channel (ZAM manufactured)" is a structural material for panels that possesses excellent scratch resistance and high corrosion resistance against bending and cutting processes. Thanks to the zinc-aluminum-magnesium coating layer, it offers performance that surpasses conventional hot-dip galvanized coatings. Additionally, it is an environmentally friendly chromium-free product (compliant with RoHS). Please use it as a supporting hardware for mounting equipment, ducts, electrical wires, busbars, piping, etc. 【Features】 ■ Performance that exceeds conventional hot-dip galvanizing ■ Excellent scratch resistance ■ High corrosion resistance against bending and cutting processes ■ Environmentally friendly chromium-free product (compliant with RoHS) ■ Made of material "ZAM" that exhibits excellent corrosion resistance *For more details, please refer to the PDF document or feel free to contact us.

The "Channel End Cap" is a terminal protection cap for the "ABC Channel" manufactured by Shinohara Electric. It prevents injuries caused by burrs on cut surfaces, thereby enhancing safety. Additionally, it eliminates the need for processing cut surfaces, improving work efficiency. Furthermore, two new types have been added: a trivalent chromate finish and a gray type that blends well with stainless steel. 【Features】 ■ Prevents injuries in advance ■ No need for processing cut surfaces ■ Improves work efficiency ■ Available in trivalent chromate finish and gray type *For more details, please refer to the PDF document or feel free to contact us.

"FRP Insulating Structural Materials (Angles, Channels, Square Pipes)" are structural materials that use fiberglass as a reinforcing base material, combined with thermosetting resin. They possess insulation and strength that cannot be achieved with ordinary plastics. They can be easily cut, drilled, and processed, making them widely usable as insulating structural materials. [Features] - Fiberglass as the reinforcing base material - Structural material combined with thermosetting resin - Excellent insulation and strength - Easy to cut, drill, and process *For more details, please refer to the PDF document or feel free to contact us.

The "Spacer" is a structural material suitable for reinforcing the "ABC Channel" or as a color during equipment installation. It is processed from steel pipes and finished with electro-galvanized trivalent chromate treatment. Please use it for reinforcing the space when tightening the "ABC Channel." 【Features】 It is optimal for reinforcing the "ABC Channel" or as a color during equipment installation. 【Material】 Processed from steel pipes, finished with electro-galvanized trivalent chromate treatment. *For more details, please refer to the PDF materials or feel free to contact us.

Our "assembly hardware" is designed to fit the dimensions of the "ABC channel," making assembly easy with just a bolt tightening. The material is made of steel plate, finished with trivalent chrome electro-galvanizing. *For more details, please refer to the PDF document or feel free to contact us.

【Features】 ■ There is no need to drill new holes or tap for additions, modifications, or changes inside distribution boards, etc. ■ Taps (AH-4, 5, 6) are installed in two directions, allowing for flexible mounting of parts and equipment. ■ It can also be used for wiring and piping in the steel structure of electrical construction. *For more details, please refer to the PDF document or feel free to contact us.

This is a bracket used to adjust the installation height of equipment inside the panel. 【Features】 ■ By connecting two pieces, the height can be adjusted to either 120mm or 150mm. ■ For fine adjustments of 1mm or 2mm, please use washers for adjustment. ■ It can be tightened with a wrench or monkey wrench. *For more details, please refer to the PDF document or feel free to contact us.

【Features】 The hexagonal post is covered with a gray heat shrink tube. For M4, a thickness of 0.07mm is used, while M5 and M6 are covered with a thickness of 0.1mm in the L dimension section. *For more details, please refer to the PDF document or feel free to contact us.*

【Features】 ■ By connecting two pieces, the height can be adjusted to 120mm or 150mm. ■ For fine adjustments of 1mm or 2mm, please use washers for adjustment. ■ The head of the main body is designed with a (-) groove so that it can be tightened with a (-) screwdriver. *For more details, please refer to the PDF document or feel free to contact us.

【Features】 The round post is covered with a gray heat shrink tube. M4 has a thickness of 0.07mm, while M5 and M6 have a thickness of 0.1mm applied to the L dimension section. *For more details, please refer to the PDF document or feel free to contact us.*

"DIN rail" is a mounting bracket for equipment that conforms to the DIN standard and has a width of 35mm. It complies with the JIS-C-2812 standard. Terminal blocks, sockets, electronic devices, and any mounting equipment that is DIN and 35mm wide can be installed at any position. It is also easy to remove. Additionally, there are steel DIN rails, DIN rails of 15mm height type, and end caps for DIN rails that help prevent injuries. 【Features】 ■ Complies with the JIS-C-2812 standard ■ Can be installed at any position ■ Easy to remove ■ Suitable for mounting large equipment (15mm height type) ■ End caps to prevent injuries are also available ■ Custom cutting of DIN rail dimensions is also accepted. *For more details, please refer to the PDF materials or feel free to contact us.

The "End Cap for DIN Rail" is a terminal protection cap for "DIN Rail" manufactured by Shinohara Electric. 【Features】 ■ Prevents injuries caused by burrs on cut surfaces, enhancing safety. ■ Eliminates the need for processing cut surfaces, improving work efficiency. *For more details, please refer to the PDF document or feel free to contact us.

The "DIN Rail Cutter" is a product used for cutting our aluminum DIN rails. The "Premium DIN Rail Cutter" allows for easy cutting with less than half the force required by conventional products. 【Features】 ■ Easy cutting with less than half the force of conventional products ■ Significant improvement in work efficiency ■ Major reduction in work costs ■ No power supply needed and operates silently ■ No need for deburring the cut surface (LHC-LC) *For more details, please refer to the PDF document or feel free to contact us.

Please use it as a cover (finger guard) to protect the charging part of sockets such as relays, in combination with the manufacturer-made DH holder (compatible with protective cover installation). 【Specifications】 ■ Material: Transparent PVC ■ Packaging quantity: 10 pieces ■ Sales unit: 10 pieces *For more details, please refer to the PDF document or feel free to contact us.

The "DH Holder (DIN Rail Mounting Bracket)" is a product used for mounting wiring ducts, terminal blocks, and terminal plates on DIN rails manufactured by Shinohara Electric. It can be securely fixed at any position on the DIN rail simply by tightening two fixing screws. Mounting equipment can be easily done with screws (4 locations, M4 threaded). It can also be used as a fastening bracket for terminal blocks, relays, etc. 【Features】 ■ Single-side mounting type: S type ■ Double-side mounting type: RL type ■ Equipment can be easily mounted with screws ■ Can also be used as a fastening bracket for terminal blocks, relays, etc. *For more details, please refer to the PDF document or feel free to contact us.

The "DH Holder (Socket Mounting Type)" is an auxiliary mounting bracket for sockets that is used with DIN rails manufactured by Shinohara Electric. 【Features】 1. It now supports the installation of Panasonic and Meiko Electric tumbler switches (only DH-5050TS). 2. It can be fixed at any position on the DIN rail by simply tightening one fixing screw. 3. It uses flat head screws for the mounting screws (with countersunk holes), making the mounting surface flat. 4. It is pre-processed to allow for easy installation of sockets. 5. In addition to socket installation, we can also provide additional processing to allow for the installation of noise filters, etc., upon request. *For more details, please refer to the PDF document or feel free to contact us.

The "DH Holder (Blank Type)" is an auxiliary bracket that can be mounted on a DIN rail made by Shinohara Electric and allows customers to perform custom tap hole processing to attach various devices. It can be processed for tap holes and round holes according to the breakers, devices, and brackets used, and is manufactured with a thickness of 2.3mm to ensure the thread can be secured without the need for barrelling. It can be fixed at any position on the DIN rail by simply tightening one fixing screw, so there is no need to attach it directly to the middle plate. Countersunk screws are used for the mounting screws (with countersunk holes), making the mounting surface flat. 【Features】 ■ Custom hole processing can be done according to the breakers, devices, and brackets used ■ Manufactured with a thickness of 2.3mm to ensure thread security ■ No need for direct attachment to the middle plate ■ Countersunk screws are used for the mounting screws *For more details, please refer to the PDF document or feel free to contact us.

The "DH Holder (Switch Mount Type)" is a product used to mount toggle switches and volume controls onto DIN rails made by Shinohara Electric, in combination with the switch mounting brackets "TK-30," "TK-30-6.5," and "TK-30-16.5." It can be fixed at any position on the DIN rail by simply tightening one fixing screw. Additionally, it uses flat head screws for the mounting screws (with countersunk screw holes) to ensure a flat mounting surface. Furthermore, the switch mounting brackets are pre-tapped for easy installation. 【Features】 ■ Applicable brackets: Shinohara Electric switch mounting brackets TK-30, TK-30-6.5, and TK-30-16.5 ■ Can be fixed at any position on the DIN rail ■ Pre-tapped for easy installation ■ Uses flat head screws for mounting *For more details, please refer to the PDF document or feel free to contact us.

The "DH Holder (DIN Rail Compatible Noise Filter Mounting Bracket)" is a product manufactured by Shinohara Electric that can be mounted on a DIN rail to assist in the installation of noise filters. By simply tightening one fixing screw, it can be secured at any position on the DIN rail, eliminating the need for direct attachment to the back panel. The mounting screws use flat-head screws to ensure a flat mounting surface. To facilitate easy installation of noise filters, it is pre-tapped. Additionally, it can also accommodate Shinohara's push button mounting brackets (PBK series). 【Features】 ■ Can be fixed at any position on the DIN rail ■ No need for direct attachment to the back panel ■ Uses flat-head screws for mounting ■ Pre-tapped for easy installation ■ Compatible with Shinohara's push button mounting brackets (PBK series) *For more details, please refer to the PDF document or feel free to contact us.

The "Slim Breaker Busbar" is a busbar specifically designed for neutral terminal integrated breakers (Slim Breakers). Its structure does not create any steps on the main busbar, allowing it to be used with conventional designs, making wiring work easy. It is equipped with an insulating tube, so you can use it with confidence. (The SB-T type does not have an insulating tube.) Additionally, we offer a "3-phase 4-wire type with a 30mm pitch" for 100A circuits and a "3-phase 4-wire type with a 35mm pitch" for 225A circuits. 【Features】 ■ Structure that does not create steps on the main busbar ■ Usable with conventional designs ■ Easy wiring work ■ Insulated covering (excluding SB-T type) ■ Rated current: 30A *For more details, please refer to the PDF document or feel free to contact us.

The "bus bar for distribution boards" is used as a bus bar for each breaker in the distribution board. By using pre-standardized bus bars during the assembly of the distribution board, you can eliminate the hassle of manufacturing them each time as was done in the past. We offer C-type, S-type, T-type, TC-type, and TS-type in varying lengths. The material is copper bar with nickel plating finish. 【Features】 ■ For distribution boards ■ Used in advance during assembly ■ Material: Copper bar with nickel plating finish *For more details, please refer to the PDF document or feel free to contact us.

The "joint bar" is used as a joint between the main breaker and the bus bar when changing the pitch width of the bus bar. It is particularly convenient to use in conjunction with our "bus bars for slim breakers" when using a neutral terminal integrated breaker (slim breaker). We offer various types compatible with main breaker capacities of 50AF, 100AF, 125AF, 225AF, and 250AF, allowing you to use them according to your needs. 【Features】 ■ Changes the pitch width of the bus bar ■ Various types available to match the capacity of the main breaker ■ Material: Copper with glossy tin plating finish *For more details, please refer to the PDF materials or feel free to contact us.

The "branch bus copper bar" is used as a bus bar for control panels and distribution boards, as well as for branch bus bars. Since the screw holes are pre-processed, the hassle of tapping is eliminated. We offer seven types of standard products ranging from 100A to 400A. You can cut them according to your needs for use. Additionally, we also accept orders for custom dimensions. 【Features】 ■ Pre-processed screw holes ■ Eliminates the hassle of tapping ■ A lineup of seven standard products from 100A to 400A ■ Can be cut according to application ■ Material: Copper plate with nickel plating finish *For more details, please refer to the PDF document or feel free to contact us.

The "Earth Bar" is used as a grounding copper bar for control panels, distribution boards, and more. Since the screw holes are pre-processed, there is no need for tapping after purchase. There are various sizes and numbers of screw holes available, allowing you to choose according to the number of incoming lines. We also accept custom size orders. Additionally, we offer earth bars that can be attached to the "Earth Terminal EC8-2" manufactured by Shinohara Electric. 【Features】 ■ Pre-processed screw holes ■ Saves the hassle of tapping ■ Material: Copper plate with nickel plating finish *For more details, please refer to the PDF document or feel free to contact us.

The "Relay Jumper Bar" can be used for wiring connections in relay sockets, remote relays, etc., which helps to reduce labor in wiring. There are five types of terminal pitch: 19.4mm, 22mm, 25mm, 28mm, and 29mm. By selecting according to the compatible models, work efficiency can be improved. Additionally, the exposed parts are treated with insulation coating for safety. We also offer jumper bars with terminal spacing of 10mm and 15.5mm, as well as round terminal types. 【Features】 ■ Reduces labor in wiring ■ Five types of terminal pitch to choose from ■ Improves work efficiency ■ Exposed parts are insulated and safe ■ Material: Brass t=0.7mm, nickel-plated finish, with insulation coating (black) *For more details, please refer to the PDF document or feel free to contact us.

The "Wiring Bar for Circuit Protectors" is a wiring bar suitable for the wiring of circuit protectors with a body width of 35mm. By using it for the wiring of circuit protectors, labor-saving in wiring can be achieved. There are two types available: a bent type suitable for combining multiple wiring bars, and a flat type suitable for use with crimp terminals for primary and secondary wiring. The exposed parts are treated with an insulating coating, ensuring safety. 【Features】 ■ Labor-saving in wiring ■ Two types: bent type and flat type ■ Exposed parts are treated with an insulating coating for safety ■ Applicable to circuit protectors with a body width of 35mm ■ Material: Brass t=0.8mm, nickel-plated finish, with insulating coating (black) *For more details, please refer to the PDF materials or feel free to contact us.

By using it for the jumper wiring of terminal blocks, labor-saving in wiring can be achieved. Additionally, the exposed parts are treated with insulation coating, ensuring safety. We offer round terminal types designed to fit terminal blocks with a terminal pitch of 16mm, 24mm, and a pole pitch of 11mm. 【Features】 ■ Achieves labor-saving in wiring ■ Used for jumper wiring of terminal blocks ■ Exposed parts are treated with insulation coating for safety ■ Material: Brass, nickel-plated finish, with insulation coating *For more details, please refer to the PDF document or feel free to contact us.

The "Push Button Bridge Bar (Round Terminal Type)" is a bridge bar used for the common wiring of push button switches. Not only does it make the common wiring of push button switches easier compared to using wires, but it also reduces labor in wiring. Additionally, the exposed parts are treated with an insulation coating for safety. 【Features】 ■ Reduces labor in wiring ■ Easier wiring compared to using wires ■ Exposed parts are treated with insulation coating for safety ■ Material: Brass t=0.7mm, nickel-plated finish, with insulation coating *For more details, please refer to the PDF document or feel free to contact us.

The "Switch Bridge Bar for Switches" is a bridge bar used for wiring connections such as push buttons and select switches. By using it for common line wiring of switches, wiring can be streamlined. This is particularly effective in control panels with many switches, resulting in a neater wiring finish. The insertion shape is fork-type (Y-shaped), making installation and removal easy. The exposed parts are treated with an insulating coating for safety. 【Features】 - Streamlines common line wiring - Especially neat finish for control panels with many switches - Easy installation and removal - Exposed parts are insulated and safe - Material: Brass plate t=0.6mm, nickel-plated finish, with insulating coating *For more details, please refer to the PDF document or feel free to contact us.

"Proto Oil-Based" is a one-component, room temperature natural drying liquid rubber coating agent developed in the United States. It can easily form a flexible and durable rubber-like film using the same application method as conventional paint. The coating can be applied to a wide range of materials including metal, wood, stone, glass, plastic, fiber, and paper, demonstrating excellent durability even under harsh weather conditions. Both oil-based and water-based options are available, each with unique characteristics. Please use according to your application needs. 【Features】 ■ Same application method as regular paint, easy to use ■ Flexible and durable rubber-like film ■ Flexible response (does not crack or chip) ■ Excellent effects for electrical insulation, waterproofing, rust prevention, and mold/corrosion resistance ■ Dried film does not change (applicable temperature range is -34°C to +94°C) *For more details, please refer to the PDF document or feel free to contact us.

"Iso-Rams" is an insulated flexible busbar made by laminating a highly flexible strip copper conductor and coating it with self-extinguishing black PVC resin. It can connect to various devices and copper busbars with different laminated copper strip widths. It is particularly effective for electrical equipment with high current capacity. Additionally, it has a smaller temperature rise compared to cables and bare copper busbars, and its laminated structure reduces the increase in AC resistance due to the skin effect. 【Features】 ■ Wide range of conductor sizes: 21–1200 mm² ■ Can connect to various devices and copper busbars with different laminated copper strip widths ■ High insulation performance ■ Smaller temperature rise compared to cables and bare copper busbars ■ Reduces the increase in AC resistance due to the skin effect *For more details, please refer to the PDF document or feel free to contact us.

This is a structural material for panels that allows you to install taps at any position on a DIN rail. 【Features】 ■ Can install taps at any position on the DIN rail ■ Can also be used as terminal fittings (fasteners) for the rail *For more details, please refer to the PDF document or feel free to contact us.

The "DH Holder Protective Cover Mounting Type" is a structural material for panels that allows for easy installation of protective covers around the conductive parts of DIN rail-compatible relays by fastening it together with terminal block fixing brackets. Please use it as a mounting base when using protective covers with our DIN rail-compatible relays and similar devices. Custom sizes (height, width) can also be produced. 【Features】 1. By fastening it together with terminal block fixing brackets, you can easily install protective covers around the conductive parts of DIN rail-compatible relays. 2. We also accept orders for sales as a set with mounting brackets. Please add a "T" at the end of the model number when ordering (e.g., DHC-35T). 3. Custom sizes (height, width) can also be produced. *For more details, please refer to the PDF materials or feel free to contact us.

【Features】 Once the outlet is attached to the bracket, it can be easily mounted onto the DIN rail with a single touch without the need for tools, thus saving labor. Additionally, during maintenance, it can be attached and detached without removing the outlet from the bracket. *For more details, please refer to the PDF document or feel free to contact us.*

The "DH Holder Plug Type Fuse Mounting Type" is a structural material for panels that allows you to secure a plug type fuse connection base at any position on a DIN rail by simply tightening one fixing screw. It uses countersunk screws for the mounting screws (with the mounting screw holes processed to be recessed), making the mounting surface flat. The connection base for the plug type fuse is pre-tapped for easy installation. Please use it as a mounting bracket when securing the Fuji Electric plug type fuse connection base (model number: AFA60) to our DIN rail. 【Features】 - Can be secured at any position on the DIN rail by simply tightening one fixing screw. - Uses countersunk screws for the mounting screws (with the mounting screw holes processed to be recessed), making the mounting surface flat. - Pre-tapped for easy installation of the plug type fuse connection base. *For more details, please refer to the PDF document or feel free to contact us.

【Features】 1. The appearance is beautiful and rust-resistant due to the nickel-plated finish on brass. 2. The hexagonal cross-section makes tightening easy. 【Material】 Nickel-plated brass. *For more details, please refer to the PDF document or feel free to contact us.

The "RBS Series" can be used as a bus support for distribution boards, power distribution panels, and other power boards. It is molded from "SPS," one of the lightest resins among engineering plastics, and offers excellent heat resistance and strength. It eliminates the hassle of manually processing insulating materials as in the past. 【Features】 ■ Compatible with 1000V ■ Molded from "SPS," one of the lightest resins ■ Excellent heat resistance and strength ■ Eliminates the hassle of manually processing insulating materials *For more details, please refer to the PDF document or feel free to contact us.

The "Slide-type Breaker Mounting Base (for Main Breakers)" is a structural material used as a mounting frame for main breakers. Since it is slide-type, it can be adjusted to any desired height. Additionally, we offer a total of 15 different sizes to accommodate breakers ranging from 50AF to 400AF. 【Features】 ■ Adjustable to any height with slide mechanism ■ Compatible with breakers from 50AF to 400AF ■ Available in a total of 15 different sizes ■ Made of steel plate with electric zinc plating and trivalent chromate finish *For more details, please refer to the PDF materials or feel free to contact us.

The "Fan Terminal Block Mounting Bracket" is a wiring component for ventilation fans. Since it is fastened together with the fan, no additional hole processing for terminal block installation is required. This significantly reduces labor costs and streamlines the terminal block installation process. 【Features】 ■ Significant reduction in labor costs ■ Streamlining of terminal block installation ■ No additional hole processing for terminal block installation required *For more details, please refer to the PDF document or feel free to contact us.