ナセル Product Lineup

Abaco Systems' reflective memory is utilized in VME bus, PMC, PCI, and PCIe nodes, and the PEAZ-5565 analyzer provides extensive support for these. Additionally, the PEAZ-5565 analyzer is equipped with numerous convenient troubleshooting features. ■Features - Configuration that enables diverse form factors, operating system support, and network flexibility - Global support and services from Abaco Systems, a leader in RFM technology - Local or remote monitoring options - Flexible trigger settings - Large trace buffer - Support for capturing and inspecting faulty packets

It can accommodate either 2 single QMCs or 1 double QMC. The TEWS QMC carrier board "TPCE210" can be used as a mechanical adapter to connect QMC modules compliant with VITA 93.0 to PCI Express bus-based systems.

■Contents 1. QMC Mezzanine Card "TQMC400": Programmable RS232 / RS422 / RS485 interface 2. PCI-Express Carrier "TPCE210": PCI Express x4, Revision 2.0, Gen 2 3. Cable Kit "TA307": HD68 terminal block and TA109 VHD68-HD68 cable 4. Device Driver: Various OS support (Device Driver) available

The TQMC400 is a VITA 93.0 compliant QMC mezzanine card equipped with a multi-protocol transceiver and features four UART channels. Each channel can be programmed to operate as an RS232, RS422/RS485 (full duplex), or RS485 (half duplex) interface.

The TEWS TCPS260 is a 3U module compatible with PICMG CPCI-S.0 R2.0. It can be used as a mechanical adapter to connect PMC I/O solutions to CompactPCI Serial.

The TCPS275 from TEWS is a 3U module compatible with PICMG CPCI-S.0 R2.0. It can be used as a mechanical adapter to connect XMC I/O solutions to CompactPCI Serial.

TEWS' PCIe mini card carrier can be used as a mechanical adapter to connect PCIe mini cards to PCIe bus-based systems.

VITA 93 (QMC) is a groundbreaking advancement in mezzanine card technology, offering unparalleled modularity, flexibility, scalability, and reliability.

The TFMC684 provides the capability to add a 32-bit M-LVDS (Multi-Point Low Voltage Differential Signaling) I/O interface or a 32-bit RS-485/RS-422 I/O interface to an FMC carrier card. TFMC684-10R: Compliant with TIA/EIA-899 standard (Type 2 receiver) TFMC684-20R: Compliant with TIA/EIA-485 and TIA/EIA-422 standards The 32-bit differential I/O is connected to the VHDCI-68 connector on the front panel.

The TCPS007-TM is a 3U rear I/O module compatible with PICMG CPCI-S.0 R2.0 that provides a 4-channel 10Base-T/100Base-TX/1000Base-T Ethernet interface. - 4CH Ethernet interface (10Base-T / 100Base-TX / 1000Base-T) - Equipped with common mode choke filter and RJ45 connector - Supports rear I/O of CompactPCI-Serial modules (such as TCPS892)

The TCPS892 from TEWS is a 3U module compatible with PICMG CPCI-S.0 R2.0. Ethernet 10Base-T / 100Base-TX / 1000Base-TX Equipped with Intel I350 PHY Supports IEEE 1588/802.1AS time protocol (PTP) Each port is electrically isolated from the Ethernet controller and connects to the P3 rear I/O connector. ◆ The CompactPCI Serial 3U rear board TCPS007-TM is also available.

TPCE646 is an X8 PCIe-compatible module equipped with a user-configurable AMD Zynq UltraScale+ MPSoC. It features 32 DAC output channels based on dual 16-bit DACs, with each channel designed for single-ended bipolar ±10V analog output. Additionally, it includes 8 ADC input channels using dual 16-bit ADCs, supporting a maximum of 5Msps per channel with an input range of ±10V (±20Vpp differential). Furthermore, the TPCE646 has four differential LVDS I/O lanes on the front I/O interface. The rear connector provides 64 MPSoC I/O (configurable as 64 LVCMOS18 or 32 differential LVDS), and 8 PL multi-gigabit transceivers are also available through two Samtec Firefly quad interfaces. Application development is supported using AMD Vivado and AMD Vitis design tools (license required).

The TEWS QMC Carrier Board "TCPS210" can be used as a mechanical adapter to connect QMC modules compliant with VITA 93.0 to systems with a CompactPCI serial bus. It can accommodate up to three single-width QMC modules, one double-width QMC module and one single-width QMC module, or one triple-width QMC module.

TXMC897 is a switched mezzanine card (XMC) compatible module that provides 2-channel 100Base-TX / 1000Base-T / 2.5GBase-T / 5GBase-T / 10GBase-T Ethernet and 2-channel extended small form-factor pluggable (SFP+) 10 Gigabit Ethernet interfaces. The XMC connector P15 provides access to the Intel X710-TM4/AT2 quad/dual-port 10GbE controller via an x8/x4 PCIe link. The two Ethernet interfaces support transmission speeds of 100, 1000 Mbit/s, and 2.5, 5, 10 Gbit/s, and the two SFP+ cages accept various SFP and SFP+ transceiver modules. These two SFP+ hosts are connected to the SFI interface of the Ethernet controller.

TXMC895 provides 4CH 10/100/1000 Mbit/s Ethernet connections via the RJ45 connector on the front panel. The Ethernet interface can perform an auto-negotiation algorithm to determine the optimal link parameters between link partners. It supports the IEEE 1588/802.1AS high-precision time synchronization protocol (PTP) and IEEE 802.1Qav audio/video bridging (AVB) traffic shaping (using software extensions). All ports are electrically isolated from the Ethernet controller, and various network activities are indicated by LEDs on the board.

The TQMC800 is a VITA 93.0 small form factor mezzanine card (QMC) compatible module that provides a single channel Ethernet 10Base-T / 100Base-TX / 1000Base-T interface. The Ethernet interface of the TQMC800 is equipped with the capability to determine optimal link parameters between link partners using an auto-negotiation algorithm. The TQMC800 supports IEEE 1588/802.1AS high precision time synchronization protocol (PTP) and IEEE 802.1Qav audio/video bridging (AVB) traffic shaping (via software extension).

The TQMC801 is a single-width QMC mezzanine card compliant with the VITA 93.0 standard, designed for embedded environments that require high reliability and performance, featuring high-precision time synchronization, advanced networking capabilities, and a compact design. The TQMC801 is equipped with a 1000Base-KX Ethernet interface and supports advanced network protocols such as the IEEE 1588/802.1AS high-precision time synchronization protocol (PTP) and IEEE 802.1Qav audio/video bridging (AVB) traffic shaping.

TQMC601 is a single-width QMC mezzanine card. It supports input signal voltages from 15V to 60V. The inputs are divided into four groups of 8 channels each, with each group sharing a common input ground. To prevent mutual interference, all groups are electrically isolated. The switching threshold complies with IEC 61131-2 type 3 input characteristics and each input is equipped with an electronic debounce function. The debounce timing is programmable, ensuring accurate signal quality even in noisy environments. Interrupts can be generated during edge detection for all 32 channels. Edge detection settings (rising/falling/both) are configurable.