NIDEC COMPONENTS CORPORATION List of Products and Services

- High reliability even in harsh environments due to high dust resistance and waterproofing Panel top: Equivalent to IP67 / Panel interior: Equivalent to IP60 - Sealed around the terminal area with adhesive - Optimized structural design for a light and responsive operation - Dustproof and waterproof structure suitable not only for general equipment but also for construction machinery and kitchen equipment - Suitable for use in harsh environments - Preparing to obtain safety standard cULus

• switch
• switch

● High dust resistance and waterproofing ensure high reliability even in harsh environments Panel top: Equivalent to IP67 / Panel interior: Equivalent to IP60 ● Sealed around the terminal area with adhesive ● Tool-free snap-in mounting for installation into the housing ● Optimized structural design achieves a light and responsive operation feel ● The dustproof and waterproof structure makes it suitable not only for general equipment but also for use in harsh environments such as construction machinery and kitchen equipment ● Preparing for safety standard cULus certification

• switch
• switch

● Small DIP pin arrangement ● Adoption of O-ring prevents the intrusion of dust and dirt, allowing for cleaning after soldering ● Self-cleaning mechanism

• switch
• switch

● Small gearhead stepping motor ● Easy lead assembly due to connector type ● Compliant with RoHS directive

• Stepping motor
• Stepping motor

● Small gearhead stepping motor ● Easy assembly due to connector type ● Coil resistance can be selected from unipolar with gear ratios of 1/2.5, 1/5, and 1/12 ● Available in two types: 30Ω and 60Ω

• Stepping motor
• Stepping motor

It features a compact design with an outer diameter of Φ16mm and is compatible with rated voltages of 6V or 12V. The reduction ratio can be selected from a range of 1/30 to 1/240. Leveraging its compact size and high torque, it is widely used in medical devices, analytical instruments, measuring equipment, broadcasting equipment, and other devices that require precise operation in limited spaces. Its small shaft diameter of 3mm contributes to space-saving design.

• DC Motor
• DC Motor

14 types of DC geared motors that can simultaneously achieve high torque and low-speed rotation of φ37.

• DC Motor
• DC Motor

This is a DC geared motor with an outer diameter of Φ16mm. It operates on direct current (DC) and is considered for use in a wide range of fields including industrial equipment, construction machinery, medical applications, analysis, measurement, and amusement.

• DC Motor
• DC Motor

This is a set sale of a micro blower, driver, and harness. Micro blower: TF037C-2100-F Dedicated driver: TF037-1001-D Harness for connecting the driver to the micro blower Two cables for connecting the driver to the power supply.

• Cooling system
• Cooling Equipment

The contents of this product set are as follows: Micro blower: TF029B-1000-F Dedicated driver: TF029B-1001-D Harness driver: One for power connection Note: The set for TF029B has a direct lead type connection from the micro blower to the driver, so there is only one harness for driver-power connection.

• Cooling system
• Cooling Equipment

Adoption of air pressure bearings Ultra-compact / lightweight High static pressure Low vibration Long lifespan due to bearing configuration unaffected by heat Uses resin materials compliant with FDA standards

• Cooling system
• Other heating and cooling equipment
• Cooling Equipment

Adoption of air dynamic pressure bearings Ultra-compact / lightweight High static pressure Low vibration Long lifespan due to bearing configuration unaffected by heat Available in both types with and without mounting feet Uses UL94 V0 rated resin materials

• Cooling system
• Cooling Equipment

Adoption of air dynamic pressure bearings Ultra-compact / lightweight High static pressure Low vibration Long lifespan due to bearing configuration unaffected by heat Adoption of quick couplings P14 (intake / exhaust) Use of UL94 V0 rated resin materials

• Cooling system
• Cooling Equipment

● High output (1 to 5 V) due to built-in circuitry ● Built-in temperature compensation function (0 to 50 °C) ● Dual-use type for liquids and gases (gauge pressure)

• Pressure Sensor
• Pressure Control

●Compact ●Two types of pressure port shapes ●Compliant with EMC standards

• Pressure Sensor

Low noise, 16 dB (A) Lightweight (approximately 20 g) ■ Structure Frame and impeller: ABS/PBT alloy 1 ball bearing + 1 sliding bearing

• fan
• Fan motor

Low noise: 12 dB(A) Lightweight (approximately 14 g) ■ Structure Frame and impeller: ABS/PBT alloy Bearing: 1 sliding bearing

• fan
• Fan motor

Low noise: 13 dB (A) Lightweight: Approximately 8 g ■ Structure Frame and impeller: ABS/PBT alloy Bearing: 1 sliding bearing

• fan
• Fan motor

Compact and slim (62 × 62 × 14.5 mm) Lightweight (approximately 40 g) Low noise at 23 dB(A) (MC type) ◆ Structure Frame and impeller: ABS/PBT alloy Bearing: 1 sliding bearing

• fan
• Fan motor

Double diaphragm structure Built-in temperature compensation function (0 to 50 °C)

• Pressure Sensor

<Features> - Available in SUS diaphragm type with ranges of 0-49.0, 0-98.1, 0-343, 0-981 kPa and 0-34.3, 0-98.1 kPa abs. - Double diaphragm structure - Built-in temperature compensation function (0 to 50°C)

• Pressure Sensor

● Printed circuit board mounting design: compact, DIP pin arrangement ● Adoption of "O" ring (in the contact block section) prevents the intrusion of dust and dirt, and allows for cleaning after soldering ● By using precious metal alloy wire as the contact spring and adopting a sliding contact method, it achieves a long lifespan of 50,000 rotations (under no load) and high reliability (compared to our company) ● Two types are available in the same shape: shorting and non-shorting

• switch

● Width of effective electrical angle due to 10 rotations ● Long lifespan of 5 million rotations

• Resistors

Sensing in a low-pressure area Compact board-mounted type with built-in amplifier Differential pressure measurement method

• Pressure Sensor
• Pressure Control
• Pressure

●10 Rotation ●Standard Type ●Low-Cost Type *Compared to our company ●Compatible with green measuring instruments (D-12) dial mounting

• Resistors

● Choose from 3-turn and 5-turn types ● Resistance values can be selected from 100, 200, 500, 1k, 2k, 5k, 10k, 20k ● Compliant with RoHS directive

• Resistors

Low noise, 7 dB (A) type with fluid dynamics innovations in wing shape and frame structure. Lightweight (approximately 2.3 g).

• fan
• Fan motor

□ Ultra-compact and thin FAN with a size of 17 × 5mm By compacting the motor section and achieving an ideal blade shape, it realizes high airflow and low noise (achieving high airflow of 0.01 m³/min at 7000 rpm and low noise of 5 dB equivalent at 1m).

• fan
• Fan motor

Lineup of differential pressure and absolute pressure types Standardized differential pressure type and absolute pressure type capable of measuring from negative pressure to positive pressure with a single unit Compact, lightweight, and drip-proof general-purpose pressure gauge □ Achieves drip-proof structure (IP65) with a compact 30 mm pressure gauge Adoption of highly visible LED LED display is easy to see even in dark places, in addition to panel surface mounting. Settings can be adjusted according to application Three analog output modes Eight types of switch output modes EMC standards EN 55011 (EMI) EN 61326-1 (EMS) Low power consumption with non-display mode Protection of setting data with panel lock function

• Pressure Sensor

The PS97 series is a thin-film pressure switch that boasts high precision and reliability, achieving a wide temperature range. It offers a rich selection of seven pressure ranges: 0 to 1.0 MPa, 2.5 MPa, 10 MPa, 25 MPa, 40 MPa, 50 MPa, and 80 MPa, covering a broad spectrum of medium to high pressure areas. It is equipped with an IP67 protection structure.

• Pressure Sensor

- Ultra-compact/thin, ideal for small electronic devices and localized cooling - Achieves high airflow and low noise through the use of a high-efficiency special Medilian impeller - Long lifespan achieved through a sealed bearing structure - Lightweight (approximately 1.2 g)

• fan

A product with a robust structure using a terminal box, compliant with IP67. It is ideal for outdoor use and can withstand temperatures up to 100 °C.

• Pressure Sensor

● Usable in various fields thanks to unique optical technology ● Leakage detection possible without a light shield and amplification circuit ● Corrosive liquid leakage detection possible with PFA material housing ● Compact and thin (φ 25 mm, t = 10 mm) ● Lead-free compliant, UL / CE marking compliant

• Sensors
• Safety Sensors
• Other Sensors

(1) High reliability with gold-plated contacts (2) Frequency range DC ~ 150 kHz (3) Compatible with unbalanced circuits (4) Compliant with RoHS directive

• Resistors

(1) It is faster than a bimetal switch, which requires an average of about 30 seconds for cooling and resetting. (2) Generally, it has lower electromagnetic interference than a bimetal switch. (3) It contributes to reducing repair and replacement costs. (4) Integrates overcurrent and overheating protection into a single device.

• fuse

Multi-function device with a joystick, encoder, and push switch. Optimal size and excellent operability for panel operation. Long life (joystick: 500,000 operations, encoder/push switch: 1,000,000 operations).

• encoder

Digital temperature compensation circuit achieves high precision and high reliability while being ultra-compact and lightweight due to high-density mounting. It is ideal for equipment integration. 【Features】 (1) Ultra-compact and lightweight, making it perfect for equipment integration applications. Dimensions φ17×18.7mm (M5 type), weight: approximately 19 g (M5 type) (2) Double diaphragm structure (SUS316L diaphragm, oil-filled type) ensures high corrosion resistance and high reliability (3) Operating voltage 5±0.5V, analog output 0.5–4.5V (ratio metric) (4) High precision achieved through a digital compensation circuit using COB (chip on board) mounting (5) Standard lineup includes four types of pressure ranges

• Converters and Transducers

【Features】 (1) Achieves a light and responsive feel in lever operation (2) Capable of automatic soldering to printed circuit boards (3) Three types of mounting configurations are available: "PC," "Light Angle," and "Vertical Mount" (4) The lever is designed with a focus on operability in a resin type, available in three standard colors: white, red, and gray

• power supply

【Features】 (1) The resin nut mounting increases design flexibility for equipment and improves panel mounting strength. (2) Connection to the control side is made via a connector, eliminating the need for a printed circuit board. (3) The adoption of dome-shaped contacts achieves a sharp clicking sensation.

• Coupler
• Other power sources

The handheld manometer "PG-100B series" is a revolutionary portable pressure sensor with a built-in battery, capable of checking and monitoring the pressure of both gases and liquids. It features a diffusion-type semiconductor element as the pressure sensing element, a diaphragm made of SUS316L, and a digital temperature compensation circuit, achieving compactness, lightweight design, high precision, and excellent corrosion resistance. Additionally, with the incorporation of a dedicated microcontroller, it offers enhanced functionalities such as zero adjustment, auto power-off, and unit switching (for overseas use). Furthermore, a protective cover is standard equipment for the purpose of safeguarding the main unit. It uses commercially available AA batteries (2 pieces) for power and supports analog output via a dedicated connector.

• Sensors
• Sensors
• Pressure

【Features】 (1) Snap-in installation to the device (2) Connector connection to the control side, no printed circuit board required (3) Long stroke with a button movement range of 7.5 mm (4) Adopts a self-cleaning mechanism using sliding contact for high reliability

• power supply

Switch characteristics: 1 circuit ON-OFF Contact rating: 15A, 24V DC / 20A, 12V DC Initial contact resistance: 10 mΩ or less Operating temperature range: -40 to 85°C Durability: No load 150,000 cycles Load 50,000 cycles (resistive load)

• switch

The new compact slide switch product "CL-SB Series" has been developed in response to the increasing demand for small and highly reliable slide switches in the communication and industrial equipment industries, where many slide switches are used due to the trend towards miniaturization and enhanced functionality of devices. Features of this slide switch include gold plating on the contacts for excellent contact reliability, and the use of high heat-resistant materials for the resin, which differentiates the product in terms of contact stability and reliability in high temperature and high humidity environments. Additionally, the terminal shape includes both through-hole types and SMD types compatible with automatic mounting. For more detailed information, please contact us or download the catalog.

• switch

The new compact slide switch product "CL-SA Series" is ideal for replacing jumper pins, and its ease of circuit connection and switching contributes to space-saving on the circuit board and reduction of assembly labor. Notably, it can be continuously mounted on a 2.54mm pitch board, supports flow soldering, and has a rated current of up to 500mA, making it a groundbreaking slide switch. For more detailed information, please contact us or download the catalog.

• switch

Achieving outstanding operability - Clear click feel without variation, quietness - Improved distinction during switching Long life: 2 million cycles (twice that of conventional products)

• encoder