スガツネ工業 List of Products and Services

● Free-stop torque hinge that maintains any angle ● The reciprocating torque within the operating range is constant.

This is a torque hinge that can be used at high temperatures of 100℃. It uses heat-resistant components and heat-resistant grease, allowing it to be used in areas where heat is generated.

You can choose from a wide range of approximately 8,750 products, including various mechanical components. (Total of 1,672 pages) ■ Hinges Components that open and close doors and lids. We offer various types of hinges, such as torque hinges that allow doors to stop at any desired angle and damper hinges that close safely and slowly. ■ Slide Rails and Guide Rails Components for linear motion mechanisms, mainly used for drawers. Additionally, we have: ■ Casters that can easily carry heavy loads of up to 1 ton ■ Stylish handles ■ Lifting devices (both electric and manual) ■ LED lights that comply with IP standards And much more in our extensive lineup! First, please download the digest version! If you would like a shipment, please request it through the contact form.

● It will be temporarily held at four positions: -3°, ±90°, and 177°. ● The temporary holding angle can be switched to 90°, 45°, or 135° according to the scene or device. ● The axis orientation can be used in either vertical or horizontal positions. ● It features a clean design that conceals the screw fastening area.

In addition to angle adjustment, we have prepared monitor mounts that can accommodate various usage environments and applications, such as height adjustment and full locking. ● RK Series by RK Corporation, maximum load capacity 25kg - "High load capacity, maximum 25kgf!" By combining over 10 rich options, it can be utilized in various environments, such as touch panels and monitors for machine tools. * VESA standard compliant products available. ● Monitor Arm KA-TLG type, single-axis and dual-axis types, load capacity 10kg - "Firmly fixed!" With button operation, it can be fixed at any angle and at four height levels, making it ideal for monitors of machines that generate environmental vibrations. * VESA standard compliant. ● Torque Ball Joint SJ300 type - "Angle adjustment at your command" allows for smooth operation with a wide range of motion. - The axis can stop precisely at any 360-degree angle, making it ideal for car rearview mirrors and lighting equipment. * Passed 50,000 cycle operation test. ● Monitor Mount KA-T100S50, load capacity 10kg - "Free stop x auxiliary lock" is perfect for adjusting the angle of the operation panel. - The lever operation allows for one-touch attachment and detachment of the monitor. * VESA standard compliant.

◇Features of DST (Dirac Snap Technology)◇ 1. No screws or welding required Anyone can easily assemble it! Since there is no welding, there are no work mistakes or variations in the quality of the finished product. Maintenance such as re-tightening screws is also unnecessary for a long time! 2. Excellent strength The product attached to the sheet metal will not break even when pulled with a force of 390 kg! (Strength may vary depending on the product.) 3. Compatible with a wide range of sheet thicknesses Compatible sheet thickness: 0.5 mm to 5.5 mm Expands the variety of hardware for assembly.

● Since resin parts are used in the sliding section, it prevents the generation of metal powder. ● The shaft can be used in a horizontal or vertical orientation.

● This is a 95° opening slide hinge with a torque mechanism. ● There is no reversal (spring back) when releasing torque at the closing point. ● It can be attached and detached with one touch. ● The main body is fixed by hooking it onto the pin of the mounting plate and simply pushing it in. ● Due to its structure that rotates while extending outward, interference in the lateral direction is minimized. ● It is equipped with a function to prevent accidental operation of the lock lever.

● This is a hinge with a stopper that allows for easy angle adjustment using a lever operation. ● It features a gear lock (in 10° increments) that prevents movement even under load. ● While the lever is pressed, the lock is released. ● When the lever is lifted, the unlocked state is maintained. ● Types with and without a stopper can be used together.

●When the door is closed, it becomes flush with the wall, highlighting the original design of the door. ●The temporary stop function allows for easy installation by one person in a short time. ●Vertical adjustment, horizontal adjustment, and overlay amount adjustment are made easy. ●A carefully designed product available in three colors.

Foot Handle FXSU0-0301AK for Swing Doors ● You can open and close the door with your foot without touching the handle with your hands. ● You can open and close the door even when both hands are occupied. ● Effective for preventing contact infections such as viruses. Foot Handle FXSU0-0302AK for Sliding Doors ● You can open and close the door with your foot without touching the handle with your hands. ● You can open and close the door even when both hands are occupied. ● Effective for preventing contact infections such as viruses.

● Made of stainless steel, it has excellent rust resistance. ● It has a slim ultra-thin size with a vertical width of 10 mm and a thickness of 2.7 mm.

It comes with wiring holes.

It is made of all stainless steel, so it has excellent corrosion resistance.

It is made of all stainless steel, so it has excellent corrosion resistance.

● The heavy lid can be easily lifted due to the spring's reaction force (power assist function). ● Equipped with a damper to prevent the lid from closing suddenly (soft close function, effective angle of damper approximately 30° or more). ● The combination of the built-in torsion coil spring and damper ensures very smooth movement when opening.

Introducing infection control measures that can only be achieved by Sugatsune, centered around the technology "Motion Design Tech" that ensures safe and smooth opening and closing! ◆ Adding high value to reception partitions! With the "Torque Hinge," the window at the handover point can be stopped perfectly. ◆ Adding high value to food showcases! With the "Damper Hinge," the speed and impact during opening and closing are minimized. ◆ Open and close doors without using your fingertips? With the "Push Latch," you can simply push to open the door. By combining it with a self-opening damper hinge, fingertip-free opening and closing is realized! And more, we have released a "Case Proposal Collection" that is easy to understand with illustrations! You can view it by clicking the [PDF Download] button.

KA-T100S50-W Type/P Type with Torque & Auxiliary Lock, Touch Panel Compatible If you have the following concerns▼ - The touch panel operation is unstable - The monitor droops - Angle adjustment/installation work is difficult For those individuals, Sugatsune's monitor arm features a unique torque hinge mechanism built into the main body, pursuing "stability without shaking" and overwhelming "operability." This product can help solve your challenges with monitors, operation panels, and touch panels. Free catalog shipping is currently available! (A4 size/35 pages) Please feel free to apply through the "Contact" form. You can view the digest version from "PDF Download."

>>Compact Type Monitor Mount with Ball Joint ●Strong against vibrations and high load capacity due to being tightened with bolts. ●No tools are needed for angle adjustment after installation, making it easy to operate. >>Mounting Plate ●The mounting holes on the monitor side conform to VESA standards with hole pitches of (50×50, 75×75 mm). >>Fixing Parts for Aluminum Frame ●Strong against vibrations and high load capacity due to being tightened with bolts.

>>Monitor Mount Rotating Flange Type ●It is strong against vibrations and has a high load capacity due to being tightened with bolts. ●After installation of this product, angle adjustments can be made easily without tools. >>Mounting Plate ●The mounting holes on the monitor side conform to VESA standards with hole pitch (75×75 mm, 100×100 mm). >>Keyboard Tray ●The angle of the tray can be adjusted up and down by 90°. >>Support Arm Double ●It is strong against vibrations and has a high load capacity due to being tightened with bolts.

You can adjust the length to fit the fixed tablet.

It is strong against vibrations and has high load capacity by being tightened with bolts.

[Assist Torque Hinge HG-TLAJ Type] - Equipped with a "power assist function" in the torque hinge. It opens gently and stops firmly, providing an excellent operating feel. - Safe even with high frequency of opening and closing (passed our company's opening and closing test 50,000 times!) [Recommended for places like these] - For a top cover that isn't heavy enough to require a power assist hinge but wants lighter opening and closing. - As a replacement for gas springs. - For a slightly heavy top cover of approximately H400mm and 4kg (using HG-TLAJ40×2 units). *This is just an example. For details, please contact us or download the catalog.

◆For Sheet Metal Assembly◆ 【DST Dirac Snap Technology】 Using a fastening method with two wings and a spring, installation is easy—just push the product into the mounting hole until it clicks. Three Features 1. No tools required. Just click it in by hand! Compared to traditional methods, assembly costs were reduced to one-third of screw fastening and one-fifth of welding. *According to Sugatsune research. 2. Easy to remove! Used for maintenance covers that require attachment and detachment during equipment inspections. 3. Excellent strength and peace of mind! There are cases where the sheet metal bent before the fastening mechanism even at a pulling force of 400 kg! ◆For Aluminum Frame Assembly◆ 【Joint System PJ Type】 Pinch, fit into the groove, and secure with a screw. You can fasten aluminum frames with this simple step. Three Features 1. No nuts required! Fastening is complete with just one screw! Compared to conventional fastening methods, assembly time was reduced by 56%. *According to Sugatsune research. 2. Can be added later! You can easily add aluminum frames to already assembled frames. 3. Compatible with various aluminum frames! Supports groove widths of 6mm, 8mm, and 10mm. Please contact us for details.

◆Joint System PJ Type◆ Just pinch, fit into the groove, and secure with a screw! You can easily connect aluminum frames with simple steps. Three Features 1. No nuts required! Connection is completed with just one screw! Compared to conventional fastening methods, assembly time can be reduced by 56%. *According to Sugatsune research. 2. Can be added later! You can easily add aluminum frames to already assembled frames. 3. Compatible with various aluminum frames! Supports groove widths of 6mm, 8mm, and 10mm. For details, please contact us.

● This is a torque hinge that can be used outdoors. ● The O-ring on the shaft prevents the intrusion of water and dust.

● Torque adjustment can be made with a hexagonal rod spanner (size 2.5). ● The hinge body is made of aluminum alloy, making it lightweight. ● It can be used with the axis oriented either horizontally or vertically. ● There are also similar click hinges and spring hinges available.

It is a torque hinge that releases torque at the moment of closure, preventing rebound (spring back).

●This is a torque hinge that releases torque at the moment of closing, preventing rebound (spring back). A catch is unnecessary for a snug closure.

● This is a zinc alloy torque hinge that generates torque in one direction. Since almost no torque is generated in the opposite direction, doors and other items can be operated smoothly. ● Due to its high torque (up to 11.3 N·m per unit), the number of hinges used can be reduced, saving costs. ● The operating torque in the direction of torque generation is constant.

This is an aluminum alloy torque hinge that generates torque in only one direction. Since it does not generate torque in the opposite direction, doors and similar items can be operated smoothly.

● This is a torque hinge that generates torque in one direction. Since almost no torque is generated in the opposite direction, it allows for smooth operation of doors and similar applications. ● The torque can be adjusted between 0 and 10 N·m. ● It has a high torque of up to 10 N·m. ● There are types that generate torque in the opening direction and types that generate torque in the closing direction. ● The torque adjustment section is equipped with a cap, enhancing its aesthetic appeal.

The torque hinge from REELL Corporation utilizes a special technology called REELL TORQ (patented), which minimizes the difference between static torque (the force needed to start movement from a standstill) and dynamic torque (the force while rotating) to within 10%, resulting in extremely smooth operability. Even when hands are released during door opening and closing, it keeps the rebound (spring back) below 1°. This characteristic minimizes changes in torque values even after 20,000 opening and closing tests. *Sugatsune Kogyo is the exclusive distributor for REELL Corporation in Japan.

● This is a resin torque hinge that generates torque in one direction. Since almost no torque is generated in the opposite direction, it allows for smooth operation of doors and similar applications. ● Even when you let go of the door during opening and closing, it keeps the rebound (spring back) to less than 1°. ● By limiting the difference between static torque (starting from a standstill) and dynamic torque (during rotation) to within 10%, it provides very smooth operability.

● Our unique technology has reduced the number of components, achieving a lower price. ● It can be installed on an aluminum frame.

It is a small torque hinge made of resin.

● Torque adjustment can be made with a hexagonal rod spanner (size 4). ● The hinge body is made of aluminum alloy, making it lightweight. ● It can be used with the axis oriented horizontally or vertically. ● There are also similar click hinges and spring hinges available.

● Torque adjustment can be made with a hexagonal rod spanner (size 4). ● The hinge body is made of aluminum alloy, making it lightweight. ● It can be used with the axis oriented either horizontally or vertically. ● There are also click hinges and spring hinges of the same type available.

We would like to introduce a mechanism that allows you to securely stop monitors and doors at your preferred angle. ● The monitor mount with a locking mechanism is ideal for preventing drooping due to environmental vibrations, as it allows for easy fixation of the monitor. ● The torque hinge is a removable type that makes the installation and hanging of doors easy.

● The sliding part is covered with a resin cap to prevent wear and the scattering of metal dust caused by contact between metals. ● The shape of the resin cap does not interfere with the housing when the door is opened or closed. ● In the event of light contact, the resin cap protects the hinge. ● The precision type has a specification with minimal clearance between the hinge leaf, resin cap, and shaft.

By changing the hinges, food cases become even easier to use! Here are three types of hinges that reduce the stress of opening and closing. Torque Hinge - It holds doors, lids, and covers in any position during opening and closing. - The lid won't fall, allowing you to work with it open. Damper Hinge - It slows down the speed of closing and opening doors and lids. - It can reduce the impact of slamming when closing the door, eliminating the worry of pinching fingers. Click Hinge - It holds doors, lids, and covers at a specific angle during opening and closing. - The lid won't fall, allowing you to work with it open.

● The closing speed of the door can be adjusted with a hexagonal rod wrench. ● The door can be held in a closed position thanks to the retractable feature. *This information is as of September 2021.*

It's a hinge that lifts even heavy lids with a "fluffy" motion.

● The heavy lid can be easily lifted due to the spring's reaction force (power assist function). ● The damper works when closing (soft close function). ● The torque can be adjusted by turning the adjustment screw (±5%). ● The resin cover conceals the main body and mounting holes, resulting in a neat appearance. ● Suitable for rear mounting of equipment or when the center of gravity of the lid is above the hinge's rotation center.

● Can be temporarily held every 30 degrees. ● The axis can be used in either horizontal or vertical orientation. ● There are also torque hinges of the same type, as well as torque-free hinge spring hinges that do not generate torque.