スガツネ工業 List of Products and Services

● When you wave your hand, it opens automatically with a sensor. (During normal operation, the sensor area has a green light.) It can be opened and closed without contact, making it hygienic. ● The sensing distance of the sensor can be adjusted up to 300 mm using the dial on the back. You can also stop the automatic opening and closing by turning off the sensor detection. ● It has a soft close feature. ● It is designed with plates on both sides inside the waste entry to prevent hand pinching. ● It can be opened and closed manually in case of a power outage. *This information is as of August 2022.*

• Other machine elements
• Analytical Equipment and Devices

- The carriage uses a self-designed multi-roller, allowing for smooth movement even under loads from various directions. - We are conducting tests at 200 mm/sec, with 300,000 cycles of a 100 mm back-and-forth movement. Please contact us for more details. - Since there is no ball creep phenomenon, it can be used in conjunction with motor drive. - There is also an 8-wheel type carriage, which improves the rated load while maintaining the travel distance. - We also offer a short carriage type with a shorter overall length that can extend the travel distance by 13 mm. - There is a slim type with a guide rail width of 13 mm. *This information is accurate as of December 2023.*

• Other machine elements

● It is a concealed hinge type that is not visible from the front. ● The closing speed of the door can be adjusted with a hexagonal rod wrench. ● The retracting function slowly pulls the door in. *This information is as of September 2021.*

• Other machine elements
• Analytical Equipment and Devices
• Other machine tools

● This is a hinge that closes by its own weight and can be slowly closed at the end with the force of a damper. ● It allows for easy installation and removal of the door due to its insert and remove capability. ● The closing speed of the door can be adjusted. ● It has a structure that prevents insertion and removal when closed (0°). ● It allows for position adjustment of the door (±3 mm front and back, left and right).

• Other machine elements
• Analytical Equipment and Devices
• Other machine tools

- This is a bracket that allows you to freely adjust the position of the photoelectric sensor. - Once you have positioned the photoelectric sensor where you want it, you can simply tighten the knob to secure it. - The mounting holes are elongated, allowing for angle adjustments as well. 【For customers like this】 - Frequently use photoelectric sensors - Often change the position of the photoelectric sensor to match the type and size of the workpiece - Want to have an adjustable range at the mounting part of the photoelectric sensor in advance *Please use it in conjunction with the Mini Guide Rail MRS-30 type.

• Other machine elements
• bracket

What is a slide rail? It is a linear motion component for straight motion mechanisms. It is also called a telescopic rail. There are high-performance rails equipped with self & soft-closing mechanisms that suppress impact when closed, and structures that are less prone to creep phenomena. This publication includes almost all the fundamentals of slide rails, ranging from ultra-small and ultra-thin models in the smallest class of the industry to ultra-high load capacity, ultra-heavy, and ultra-large models in the largest class! 【Table of Contents for the Book on the Basics of Slide Rails】 ● Structure of Slide Rails ● Basics of Slide Rails ● Various Lineups ● Guide Rails are Also Available! ● Selectable Mechanisms ● Solutions to These Challenges! ● Case Studies / Application Examples ● Precautions When Installing Slide Rails ● Considerations for Load Capacity (22 pages in total)

• Other machine elements
• Beverage Production Equipment
• Food Packaging Machinery

Toughness & Beautility HANDLE We propose handles for industrial, manufacturing, and medical devices that combine "Toughness," capable of withstanding various usage environments, and "Beautility," born from the pursuit of operational feel.

• Other machine elements
• Analytical Equipment and Devices
• Other machine tools

Toughness & Beautility HANDLE We propose handles for industrial, manufacturing, and medical devices that combine "Toughness," capable of withstanding various usage environments, and "Beautility," born from the pursuit of operational feel.

• Other machine elements
• Analytical Equipment and Devices
• Other machine tools

Toughness & Beautility HANDLE We propose handles for industrial, manufacturing, and medical devices that combine "Toughness" capable of withstanding various usage environments and "Beautility," which is born from the pursuit of operational feel.

• Other machine elements
• Analytical Equipment and Devices
• Other machine tools

-Concept- Sugatsune's new challenge, the "Toughness & Beautility Handle," serves as the interface between humans and machines. By re-evaluating the concept of handles from the ground up, the "Toughness & Beautility Handle" was born. "Strength: Toughness" Understanding the harshness of the work environment, we establish unique standards (load tests and internal specifications) for the handle based on the specifications and standards required in various industries, and we carry out design and development accordingly. "Functional Beauty: Beautility" We value not only the beauty of the handle itself but also the harmony when it is attached to a device. Additionally, we focus on designing for comfort and usability when the handle is actually gripped. The "Toughness & Beautility Handle" emphasizes the beauty of the handle as an individual component, as well as the harmony when attached to a device. We also prioritize comfort and usability in the design when the handle is held.

• Other machine elements

◆Clean Hinge HG-CV・HG-CV-65N Type The sliding part is equipped with a resin cap, preventing wear between metals. ◆Clean Hinge HG-CV-127 The built-in thrust bearing and needle bearing in the sliding part reduce wear between metals. ◆Clean Magnet Catch The magnet is encased in resin, preventing rust and eliminating metal powder generation. ◆Clean Stay The resin parts in the sliding section prevent wear between metals, and the resin cover further prevents the scattering of metal powder. ◆Clean Fastener The hook contact area is coated with resin, and a resin bushing is used on the rotating shaft, eliminating wear between metals and preventing metal powder generation. ◆Handle MH-P Type SEMI Standard Compliant PAT - The shape is easy to grip even when wearing gloves (compliant with SEMI standards, SEMI S8-0308). - Made from lead-free polyvinyl chloride (PVC), it has excellent weather resistance and chemical resistance. - Other products compliant with SMI standards are also available. *This information is as of April 2020. For more details, please contact us or download the catalog.

• Other machine elements

The hook contact area is coated with resin, and a resin bushing is used on the rotating shaft, preventing wear between metals and eliminating the generation of metal dust.

• Other Auto Parts
• Spring
• cylinder

● This magnet is coated with resin, making it resistant to rust and ideal for wet areas. ● In clean rooms, it is best combined with the receiving seat MC-JM49 (sold separately).

• Other Auto Parts
• Spring
• cylinder

● The sliding part is covered with a resin cap to prevent wear and the scattering of metal dust caused by contact between metals. ● The shape of the resin cap does not interfere with the housing when the door is opened or closed. ● In the event of light contact, the resin cap protects the hinge. ● The precision type has a specification with minimal clearance between the hinge leaf, resin cap, and shaft.

• Other Auto Parts
• Spring
• cylinder

●It complies with SEMI standards. (SEMI S8-0218 Section 6.8) ●The bolts move, making installation easier.

• Other Auto Parts
• Spring
• cylinder

◆Joint System PJ Type◆ Just pinch, fit into the groove, and secure with a screw! You can easily connect aluminum frames with simple steps. Three Features 1. No nuts required! Connection is completed with just one screw! Compared to conventional fastening methods, assembly time can be reduced by 56%. *According to Sugatsune research. 2. Can be added later! You can easily add aluminum frames to already assembled frames. 3. Compatible with various aluminum frames! Supports groove widths of 6mm, 8mm, and 10mm. For details, please contact us.

• Other machine elements

◆For Sheet Metal Assembly◆ 【DST Dirac Snap Technology】 Using a fastening method with two wings and a spring, installation is easy—just push the product into the mounting hole until it clicks. Three Features 1. No tools required. Just click it in by hand! Compared to traditional methods, assembly costs were reduced to one-third of screw fastening and one-fifth of welding. *According to Sugatsune research. 2. Easy to remove! Used for maintenance covers that require attachment and detachment during equipment inspections. 3. Excellent strength and peace of mind! There are cases where the sheet metal bent before the fastening mechanism even at a pulling force of 400 kg! ◆For Aluminum Frame Assembly◆ 【Joint System PJ Type】 Pinch, fit into the groove, and secure with a screw. You can fasten aluminum frames with this simple step. Three Features 1. No nuts required! Fastening is complete with just one screw! Compared to conventional fastening methods, assembly time was reduced by 56%. *According to Sugatsune research. 2. Can be added later! You can easily add aluminum frames to already assembled frames. 3. Compatible with various aluminum frames! Supports groove widths of 6mm, 8mm, and 10mm. Please contact us for details.

• Other machine elements

[Assist Torque Hinge HG-TLAJ Type] - Equipped with a "power assist function" in the torque hinge. It opens gently and stops firmly, providing an excellent operating feel. - Safe even with high frequency of opening and closing (passed our company's opening and closing test 50,000 times!) [Recommended for places like these] - For a top cover that isn't heavy enough to require a power assist hinge but wants lighter opening and closing. - As a replacement for gas springs. - For a slightly heavy top cover of approximately H400mm and 4kg (using HG-TLAJ40×2 units). *This is just an example. For details, please contact us or download the catalog.

• Other machine elements
• Analytical Equipment and Devices
• shaft

Stainless Steel Gas Spring ● Suitable for environments requiring corrosion resistance. ● Optional features such as wiper rings and low-temperature designs can be added. Retractable Gas Spring ● A retractable gas spring that can hold the closed state of a ceiling cover or a downward-opening door. Compact Gas Spring ● A compact gas spring that can be installed in spaces with limited room, such as inside equipment. Double Stroke Gas Spring ● A gas spring with two types of extension force cylinders, strong and weak. Even large lids that are heavy to start closing and have a wide opening angle can be closed with light force. We also offer a wide range of optional products. For more details, please contact us. We have a dedicated inquiry form for gas springs. Feel free to reach out to us! *Selection requires information such as the center of gravity and weight of the door or lid. Please check the specifications of the door or lid in advance. *It may take 2 to 3 days to respond after your inquiry.

• Other Auto Parts
• Spring
• cylinder

【Space-saving soft close stay】 1. Components are consolidated on the door and top panel, resulting in a clean appearance! There is no need to attach components to the side panels like with typical stays. 2. Positioning is easy during installation. 3. Achieves space-saving design. (Approximately 70mm in depth!)

• Other machine elements
• Analytical Equipment and Devices
• Other machine tools

It is strong against vibrations and has high load capacity by being tightened with bolts.

• Other machine elements

You can adjust the length to fit the fixed tablet.

• Other machine elements

>>Monitor Mount Rotating Flange Type ●It is strong against vibrations and has a high load capacity due to being tightened with bolts. ●After installation of this product, angle adjustments can be made easily without tools. >>Mounting Plate ●The mounting holes on the monitor side conform to VESA standards with hole pitch (75×75 mm, 100×100 mm). >>Keyboard Tray ●The angle of the tray can be adjusted up and down by 90°. >>Support Arm Double ●It is strong against vibrations and has a high load capacity due to being tightened with bolts.

• Other machine elements

●It is a sturdy hinge made of 6 mm thick stainless steel. ●It opens and closes smoothly with a special ring (oil-embedded bearing). ●It comes with a ceremonial star.

• Other machine elements
• Analytical Equipment and Devices
• Other machine tools

●It uses 6 mm thick stainless steel. ●It moves smoothly with a special ring (oil-impregnated bearing). ●It is equipped with a celestial star.

• Other machine elements
• Analytical Equipment and Devices
• Other machine tools

>>Compact Type Monitor Mount with Ball Joint ●Strong against vibrations and high load capacity due to being tightened with bolts. ●No tools are needed for angle adjustment after installation, making it easy to operate. >>Mounting Plate ●The mounting holes on the monitor side conform to VESA standards with hole pitches of (50×50, 75×75 mm). >>Fixing Parts for Aluminum Frame ●Strong against vibrations and high load capacity due to being tightened with bolts.

• Other machine elements

KA-T100S50-W Type/P Type with Torque & Auxiliary Lock, Touch Panel Compatible If you have the following concerns▼ - The touch panel operation is unstable - The monitor droops - Angle adjustment/installation work is difficult For those individuals, Sugatsune's monitor arm features a unique torque hinge mechanism built into the main body, pursuing "stability without shaking" and overwhelming "operability." This product can help solve your challenges with monitors, operation panels, and touch panels. Free catalog shipping is currently available! (A4 size/35 pages) Please feel free to apply through the "Contact" form. You can view the digest version from "PDF Download."

• Other machine elements

Introducing infection control measures that can only be achieved by Sugatsune, centered around the technology "Motion Design Tech" that ensures safe and smooth opening and closing! ◆ Adding high value to reception partitions! With the "Torque Hinge," the window at the handover point can be stopped perfectly. ◆ Adding high value to food showcases! With the "Damper Hinge," the speed and impact during opening and closing are minimized. ◆ Open and close doors without using your fingertips? With the "Push Latch," you can simply push to open the door. By combining it with a self-opening damper hinge, fingertip-free opening and closing is realized! And more, we have released a "Case Proposal Collection" that is easy to understand with illustrations! You can view it by clicking the [PDF Download] button.

• Other machine elements

● The heavy lid can be easily lifted due to the spring's reaction force (power assist function). ● Equipped with a damper to prevent the lid from closing suddenly (soft close function, effective angle of damper approximately 30° or more). ● The combination of the built-in torsion coil spring and damper ensures very smooth movement when opening.

• Other machine elements

It is made of all stainless steel, so it has excellent corrosion resistance.

• Other machine elements

It is made of all stainless steel, so it has excellent corrosion resistance.

• Other machine elements

It comes with wiring holes.

• Other machine elements

● Made of stainless steel, it has excellent rust resistance. ● It has a slim ultra-thin size with a vertical width of 10 mm and a thickness of 2.7 mm.

• Other machine elements

Foot Handle FXSU0-0301AK for Swing Doors ● You can open and close the door with your foot without touching the handle with your hands. ● You can open and close the door even when both hands are occupied. ● Effective for preventing contact infections such as viruses. Foot Handle FXSU0-0302AK for Sliding Doors ● You can open and close the door with your foot without touching the handle with your hands. ● You can open and close the door even when both hands are occupied. ● Effective for preventing contact infections such as viruses.

• Other machine elements

●When the door is closed, it becomes flush with the wall, highlighting the original design of the door. ●The temporary stop function allows for easy installation by one person in a short time. ●Vertical adjustment, horizontal adjustment, and overlay amount adjustment are made easy. ●A carefully designed product available in three colors.

• Other machine elements

● This is a hinge with a stopper that allows for easy angle adjustment using a lever operation. ● It features a gear lock (in 10° increments) that prevents movement even under load. ● While the lever is pressed, the lock is released. ● When the lever is lifted, the unlocked state is maintained. ● Types with and without a stopper can be used together.

• Other machine elements
• Other physicochemical equipment

● This is a 95° opening slide hinge with a torque mechanism. ● There is no reversal (spring back) when releasing torque at the closing point. ● It can be attached and detached with one touch. ● The main body is fixed by hooking it onto the pin of the mounting plate and simply pushing it in. ● Due to its structure that rotates while extending outward, interference in the lateral direction is minimized. ● It is equipped with a function to prevent accidental operation of the lock lever.

• Other machine elements

● This is a torque hinge that can be used outdoors. ● The O-ring on the shaft prevents the intrusion of water and dust.

• Other machine elements

● Achieves one-touch installation with sufficient strength. No screws or welding are required. For details, please refer to the DST series introduction. ● Just by installing it, the earth clip scrapes the paint off the mounting surface, allowing the joined panels and fasteners to conduct electricity, functioning as grounding between the panels. ● Can connect two or more adjacent panels.

• Beverage Production Equipment
• Other machine elements
• Food Packaging Machinery

● Since resin parts are used in the sliding section, it prevents the generation of metal powder. ● The shaft can be used in a horizontal or vertical orientation.

• others
• Surveillance Cameras

● This is an indoor microwave sensor switch that can unlock simply by waving your hand. It is hygienic due to its non-contact nature. ● It detects with high precision as it is not affected by heat or light. The sensing distance can be adjusted within a range of 100 to 600 mm. ● It features a momentary mode (default setting) that automatically returns to a locked state after unlocking, and can switch to an alternate mode that toggles between locking and unlocking with each hand wave. ● It can be installed on non-metal walls or behind walls made of materials like gypsum board or plastic, as the microwave can penetrate the wall, allowing for a sensing area. It can be used in combination with the electromagnetic electric lock "Magna Lock Series."

• Other machine elements
• Food storage equipment and facilities

By changing the hinges, food cases become even easier to use! Here are three types of hinges that reduce the stress of opening and closing. Torque Hinge - It holds doors, lids, and covers in any position during opening and closing. - The lid won't fall, allowing you to work with it open. Damper Hinge - It slows down the speed of closing and opening doors and lids. - It can reduce the impact of slamming when closing the door, eliminating the worry of pinching fingers. Click Hinge - It holds doors, lids, and covers at a specific angle during opening and closing. - The lid won't fall, allowing you to work with it open.

• Other machine elements

Toughness & Beautility HANDLE We propose handles for industrial, manufacturing, and medical devices that combine "Toughness," capable of withstanding various usage environments, and "Beautility," born from the pursuit of operational feel.

• Other machine elements
• Analytical Equipment and Devices
• Other machine tools

Toughness & Beautility HANDLE We propose handles for industrial, manufacturing, and medical devices that combine "Toughness," capable of withstanding various usage environments, and "Beautility," born from the pursuit of operational feel.

• Other machine elements
• Analytical Equipment and Devices
• Other machine tools

To hold the lid securely in any position, maintenance and other tasks can be performed with both hands.

• Other machine elements
• Analytical Equipment and Devices
• Other machine tools