テレダイン・レクロイ・ジャパン List of Products and Services

LogicStudio can be used as an MSO (Mixed Signal Oscilloscope) with oscilloscopes from Teledyne LeCroy, Agilent Technologies, and Tektronix, ranging from 40MHz to 1GHz. The connection is simply made using a USB cable and a BNC cable to connect the PC and LogicStudio. After that, you just need to launch the software, and it can simultaneously display logic waveforms and analog waveforms on the screen.

• Logic Analyzer

The SPARQ Signal Integrity Network Analyzer allows for quick and easy S-parameter measurements at a lower cost compared to a VNA. Calibrated measurement data can be obtained in just a few minutes, without the need to reconnect cables or connect to a standard calibration kit or ECAL (Electronic Calibration Module) during that time.

• Other network tools

A free introductory book that explains the principles and basic performance of digital oscilloscopes, which you might think you know but surprisingly don't, is currently being offered! It's an essential book for engineers. It includes plenty of illustrations and is presented in a conversational format featuring three characters, making it easy for beginners to read through. Of course, it's also recommended for veterans! ★ Free technical materials booklet giveaway ongoing ★ Everyone who applies will receive one technical materials booklet! 【Application Period】This offer will end as soon as the booklets run out. 【How to Apply】Please apply through the Teledyne LeCroy website. http://teledynelecroy.com/japan/web/default.asp *One booklet per person only.

• oscilloscope
• Technical and Reference Books
• Technical and Reference Books

This is an introductory book series that clearly explains everything from the simple question "What is jitter?" to measurement points through illustrations. (A total of 7 volumes) We encourage you to take this opportunity to check it out and use it to enhance your knowledge and for engineer education. ◆Free Booklet Gift◆ Currently, we are offering a free booklet that compiles all 7 volumes of the introductory series. If you would like one, please apply using the contact form below.

• oscilloscope
• Technical and Reference Books
• Technical and Reference Books

This is an introductory book series that focuses on Rambus, which is becoming the mainstream for high-speed memory transfer. It clearly explains the principles of Rambus and key points in measurement through illustrations. (Total of 7 volumes) We encourage you to take this opportunity to check it out and use it to enhance your knowledge and for engineer training. ◆Book Giveaway◆ Currently, we are offering a free booklet that compiles the entire introductory series (all 7 volumes) into one. If you are interested, please apply using the contact form below.

• oscilloscope
• Technical and Reference Books
• Technical and Reference Books

This is an introductory book series that clearly explains the PRML method, which has begun to be used not only in HDDs but also in optical discs, through illustrations. (Total of 7 volumes) We encourage you to take this opportunity to check it out and use it to enhance your knowledge and for engineer training. ◆Free Booklet Giveaway◆ Currently, we are offering a free booklet that compiles all 7 volumes of the introductory series. If you are interested, please apply using the contact form below.

• oscilloscope
• Technical and Reference Books
• Technical and Reference Books

This is an introductory book series that clearly explains the basic mechanisms and functions of probes, as well as lesser-known points to be aware of when measuring high-speed signals. (Total of 7 volumes) We encourage you to take this opportunity to check it out and use it to enhance your knowledge and for the education of engineers. ◆Free Booklet Gift◆ We are currently offering a free booklet that compiles the entire introductory series (all 7 volumes). If you are interested, please apply using the contact form below.

• oscilloscope
• Technical and Reference Books
• Technical and Reference Books

This is an introductory book series that explains the importance and applications of convolution, a key operation in digital signal processing, using digital filters and illustrations instead of complex formulas for better understanding. (7 volumes in total) We encourage you to take this opportunity to check it out and use it to enhance your knowledge and aid in the education of engineers. ◆Free Booklet Giveaway◆ Currently, we are offering a free booklet that compiles the entire introductory series (all 7 volumes). If you are interested, please apply using the contact form below.

• oscilloscope
• Technical and Reference Books
• Technical and Reference Books

This is an introductory book series that clearly explains the basic principles of serial transmission and its analytical methods, using many illustrations. (Total of 7 volumes) We encourage you to take this opportunity to check it out and use it to enhance your knowledge and for the education of engineers. ◆Free Booklet◆ Currently, we are offering a free booklet that compiles all 7 volumes of the introductory series. If you are interested, please apply using the contact form below.

• oscilloscope
• Technical and Reference Books
• Technical and Reference Books

QPHY-10Gbase-KR complies with IEEE-802.3ap-2007 and performs parameter measurements through jitter separation, rise and fall time measurements, and transmitter equalizer level measurements as specified by the standard's required transmitter test items.

• oscilloscope

By linking two oscilloscopes together, measurements can be taken as an oscilloscope with a maximum of 8-channel input.

• oscilloscope

SDAIII-CompleteLinQ can expand up to 4 lanes simultaneously. Multi-lane analysis allows engineers to quickly observe the eye patterns of all lanes. Alternatively, in a single lane, it is possible to analyze multiple different locations from a probing state at one point using LeCroy's differential probes or virtual probe options.

• oscilloscope

Are you looking for an MSO (Mixed Signal Oscilloscope)? 【Reusable with Multiple Oscilloscopes】 The LeCroy MSO option is available for use with multiple oscilloscopes. Observing mixed signals can be necessary during the final stages of debugging or when software engineers need to isolate issues, allowing for repurposing to other oscilloscopes when continuous observation is not required. 【High Functionality Unique to LeCroy】 With a variety of features such as logic triggers and serial decoding, it supports debugging tasks. Most importantly, it can simultaneously observe up to 36 channels at 1GS/s, ensuring that even very fast logic states are captured reliably. Additionally, with long memory (25M points/channel), it can capture logic states lasting up to 25ms.

• oscilloscope

The new LabMaster 10Zi-A series features the highest bandwidth (100GHz), the highest sampling rate (240GS/s), and the largest analysis memory (up to 1024M points/ch)! The LabMaster 10Zi-A series offers excellent scalability, allowing for easy bandwidth expansion and channel addition. The frequency range can be extended up to 65 GHz, and up to 20 modules can be connected for channel expansion. This enables channel expansion up to 80 channels at 36GHz and 40 channels at 65GHz. The LabMaster 10Zi-A series provides the only solution for the most demanding research and development applications, such as next-generation optical communication development.

• oscilloscope
• Other electronic measuring instruments

It boasts the highest bandwidth (45GHz), the highest sampling rate (120GS/s), the maximum number of channels (up to 5 channels in the 45GHz band, up to 10 channels in the 36GHz band, and up to 20 channels in the 20GHz band), and the maximum analysis memory (up to 768M points/channel). The LabMaster 9Zi-A series provides the only solution for the most demanding research and development applications, such as next-generation optical communication development.

• oscilloscope
• Other electronic measuring instruments

The next-generation communication test solution developed by MOST Corporation, an industry organization for automotive communication buses, in collaboration with LeCroy.

• oscilloscope

The next-generation communication test solution developed by MOST Corporation, an industry organization for automotive communication buses, in collaboration with LeCroy.

• oscilloscope

Broadcom, which provides semiconductors for automotive communication buses, has developed a next-generation communication test solution in collaboration with LeCroy.

• oscilloscope

The digital oscilloscope WaveSurferXs/MXs-B assists engineers in efficient circuit testing with long memory and excellent response. This new oscilloscope offers an intuitive user interface, a large screen, space-saving design, and compatibility with Windows XP at a very attractive price in the 200MHz to 1GHz range. ● Bandwidth: 200MHz to 1GHz ● Memory: 16M points to 32M points ● Sampling rate: 5 to 10GS/s ● Features a large, bright 10.4-inch color display with a wide viewing angle ● Slim, compact design with a depth of 15.2cm *For more details, please inquire through a request for materials or download.*

• Other measurement, recording and measuring instruments

Waveform viewer software "WaveStudio". WaveStudio is software that operates on a PC and is provided free of charge.

• others

This is an announcement of the "Seminar Materials and USB 3.0 Technology Seminar Presentation Materials" from Lecroy Japan, which collaborates with users to consider and propose the best measurement devices, measurement methods, repairs, maintenance, upgrades, and purchasing plans. USB Joint Seminar Presentation Materials This is the presentation material on physical layer testing for SuperSpeed USB, which Lecroy Japan was responsible for during the USB Joint Seminar held in collaboration with Toyo Technica Co., Ltd. on May 22. It explains the overview of the compliance tests being developed by USB-IF, along with the technical background that serves as a prerequisite, comparing it with USB 2.0.

• oscilloscope
• Technical Seminar

The syntax for accessing properties with structured objects has changed significantly since MATLAB R14. This document explains how to write the code necessary to access the properties of the oscilloscope. ⇒ For more details, please search for 【NO.LAB 831】 on the linked page (Ctrl+F).

• oscilloscope

The technical note from LeCroy Japan titled "Explanation of the SDAII Jitter Measurement Method" discusses the best measurement devices, measurement methods, repairs, maintenance, upgrades, and purchasing plans in collaboration with users. ■ Explanation of the SDAII Jitter Measurement Method LeCroy's SDAII analysis package employs two methods (spectrum method, NQ scale method) to measure total jitter and separate RJ and DJ, allowing for more precise detailed analysis. This document explains the differences between these methods and advanced jitter analysis features, such as the analysis of BUj, which could not be measured with conventional methods. ⇒ For more details, please search for "Explanation of the SDAII Jitter Measurement Method" on the linked page (Ctrl+F).

• oscilloscope

This is an introduction to the "Oscilloscope Technical Note on Cable De-Embedding" from Lecroy Japan, which considers and proposes the best measurement devices, measurement methods, repairs, maintenance, upgrades, and purchasing plans together with users. Cable De-Embedding removes the effects of cables. Cable De-Embedding is one of the standard features of the Serial Data Analyzer SDA7Zi series, allowing the removal of cable effects from the measurement system. This technical note introduces how the effects of two cables with different attenuation characteristics are removed by the De-Embedding function, resulting in improved measurement results. ⇒ For more details, please search for "De-Embedding" on the linked page (Ctrl+F).

• oscilloscope

This is an introduction to LeCroy Japan's "Oscilloscope Technical Note: Predicting Jitter and Amplitude Variation with 'IsoBER'," which considers and proposes the best measurement devices, methods, repairs, maintenance, upgrades, and purchasing plans together with users. "IsoBER" for predicting jitter and amplitude variation IsoBER is one of the standard features of the Serial Data Analyzer SDA 7Zi series. It is a new tool that overlays eye patterns and bathtub curves, helping with the detection of minimum eye opening and analysis of crosstalk, among other tasks.

• oscilloscope

This is an introduction to LeCroy Japan's "Technical Note: What is 'X-Stream2' that achieves the highest level of analysis speed?" where we consider and propose the best measurement devices, measurement methods, repairs, maintenance, upgrades, and purchasing plans together with users. We introduce "X-Stream2," LeCroy's unique technology that dramatically improves analysis speed and response speed, which are crucial issues for enhancing the practicality of long-memory digital oscilloscopes. With the incorporation of "X-Stream2," detailed analysis is achieved in an extremely short time. ⇒ For more details, please search for "X-Stream" on the linked page (Ctrl+F).

• oscilloscope

This is an announcement of the ET-WEST2009 seminar materials from Lecroy Japan, which proposes the best measurement devices, measurement methods, repairs, maintenance, upgrades, and purchasing plans in collaboration with users, focusing on "High-Speed Interfaces, Measurement Challenges, and Solutions." Presentation materials from the Embedded Comprehensive Technology Exhibition AD-1 These are the seminar materials presented by our Product Marketing Manager at the Analog Track AD-1 of the Embedded Comprehensive Technology Exhibition held in Osaka on June 5. It explains the trends of the latest serial interface standards such as USB 3.0, Serial ATA 3.0, and PCI Express Gen 3, as well as the analysis functions required for measurement instruments.

• oscilloscope
• Technical Seminar

This is an introduction to the seminar materials from LeCroy Japan, which collaborates with users to consider and propose the best measurement devices, measurement methods, repairs, maintenance, upgrades, and purchasing plans. The seminar focuses on "Real-time Oscilloscopes of 30GHz and 80GS/s for measuring high-speed signals exceeding 10Gbps," presented at the Electronics Packaging Society's 4th Public Research Meeting in 2008. We have published technical introduction materials for the Electronics Packaging Society's High-Speed High-Frequency Electronics Packaging Research Committee. We will introduce the latest technologies for achieving a 30GHz bandwidth, essential measurement systems for high-speed serial interface measurements, de-embedding functions to eliminate the effects of test fixtures and cables, and simulation functions for equalizers such as FFE/DFE/CTLE, including "Eye Doctor II."

• oscilloscope

This is an announcement from Lecroy Japan, which collaborates with users to consider and propose the best measurement devices, measurement methods, repairs, maintenance, upgrades, and purchasing plans. Details on the seminar materials for "Detailed Analysis of High-Speed Serial Signals" (Lecture: Embedded Technology 2008). We will introduce new methods to address increasingly faster signals, including quantitative analysis of eye patterns and detailed analysis of jitter.

• oscilloscope

This is an announcement from Lecroy Japan, which collaborates with users to consider and propose the best measurement devices, measurement methods, repairs, maintenance, upgrades, and purchasing plans. "Oscilloscope Technical Note: Basics of Signal Integrity (Issue 2)" We will publish a series of articles titled "Basics of Signal Integrity" in collaboration with Signal Consulting, consisting of eight installments. The author of the articles is Dr. Howard Johnson, a global authority in the field of signal integrity. The content is highly recommended for engineers who wish to accurately understand various issues related to improving the performance of high-speed signals. For more details, please visit our website.

• oscilloscope

This is an announcement from Lecroy Japan, which collaborates with users to consider and propose the best measurement devices, measurement methods, repairs, maintenance, upgrades, and purchasing plans. Signal Integrity Basics (Issue 3) In cooperation with Signal Consulting, we will publish a series of articles titled "Signal Integrity Basics" in eight installments. The author of the articles is Dr. Howard Johnson, a global authority in the field of signal integrity. The content is highly recommended for engineers who wish to accurately understand various issues related to improving the performance of high-speed signals. For more details, please visit our website.

• oscilloscope

This is an announcement from Lecroy Japan, which collaborates with users to consider and propose the best measurement devices, measurement methods, repairs, maintenance, upgrades, and purchasing plans. The series, which has received positive feedback from everyone each time, has now reached its fifth issue. This time, titled "Why Does This Happen?", we will introduce practical techniques. From this issue onward, we have created a dedicated page for "Fundamentals of Signal Integrity" along with previous materials. We hope you find it useful in your work. For more details, please visit our website.

• oscilloscope

This is an announcement from Lecroy Japan, which collaborates with users to think about and propose the best measurement devices, measurement methods, repairs, maintenance, upgrades, and purchasing plans. It features the "Technical Note" by Howard Johnson: Basics of Signal Integrity (Issue 4: DC Load). In the fourth installment, we will explain how the connection of probes affects the system, using actual measurement results. For more details, please visit our website.

• oscilloscope

This is an announcement from Lecroy Japan, which collaborates with users to consider and propose the best measurement devices, measurement methods, repairs, maintenance, upgrades, and purchasing plans. It introduces the "Application Note" by Howard Johnson: "Fundamentals of Signal Integrity (Issue 6: Understanding the Characteristics of Jitter)." This series, which has received positive feedback from everyone each time, has now reached its sixth issue. In this issue, we will explain jitter over three sessions, including this one and two more to follow. The first session of the jitter series is titled "Understanding the Characteristics of Jitter," where we will explain the basic concepts of what jitter is. Please look forward to more detailed explanations of jitter in the upcoming issues. For more details, please visit our website.

• oscilloscope

This is an introduction to the "Oscilloscope Technical Note: Basics of Signal Integrity (Issue 1)" from Lecroy Japan, which collaborates with users to consider and propose the best measurement devices, measurement methods, repairs, maintenance, upgrades, and purchasing plans. Basics of Signal Integrity (Issue 1, Issue 2) In collaboration with Signal Consulting, we will publish a series of articles titled "Basics of Signal Integrity" in eight installments. The author of the articles is Dr. Howard Johnson, a globally recognized authority in the field of signal integrity. The content is highly recommended for engineers who wish to accurately understand various issues related to improving the performance of high-speed signals. *For more details, please visit our website.

• oscilloscope