We will be exhibiting at the "Construction Technology Exhibition 2022 Kinki" from November 9 (Wednesday) to November 10 (Thursday)! [Ended]

Inspection is possible just by placing the probe on the designated part of the anchor! A non-destructive testing device that can inspect and determine the bonding condition of post-installed anchors.

The (HAWK) Anchor Checker is a non-destructive testing device that can inspect and determine the bonding condition of post-installed anchors. It allows for inspection simply by placing the probe on the designated part of the anchor, making it possible to conduct tests in a shorter time compared to tensile tests. Additionally, while sound testing can yield varying results due to surrounding noise or the skill of the tester, the Anchor Checker sets thresholds based on the measurement values of anchors in good installation condition, ensuring consistent evaluations. (Note: This does not guarantee the pull-out resistance of post-installed anchors.) 【Features】 ■ Lightweight and Compact: It is lightweight and compact, allowing for space-saving inspections. ■ Non-destructive: Since inspection is performed simply by placing the probe, it does not affect the anchor or the structure. ■ Easy Inspection: It does not require complex operations, enabling quick inspection and determination. ■ Fair Evaluation: It automatically performs quantitative assessments based on pre-set thresholds. *For more details, please download the PDF or contact us.

• Other inspection equipment and devices

We propose a system that excels in construction and inspection capabilities to prevent third-party damage caused by falling objects!

At K.F.C. Co., Ltd., we handle preventive maintenance technology using anchors, known as the "Fail-Safe System." Our unique creation, the "Hawk Tie Wire Anchor Z," is a post-installed anchor that integrates the wire connection and the main body through a single molding process. It is suitable for fail-safe applications in disaster prevention equipment such as sprinklers and water supply pipes. Additionally, we offer the "Torsion Nut" to prevent human error. We also have the "Hawk Stopper Drill" in our lineup, which improves the quality of construction during anchor installation. 【Product Lineup】 ■ Hawk Tie Wire Anchor Z Type I ■ Hawk Tie Wire Anchor Z Type II (with shackle) ■ Hawk Tie Wire Anchor Z Type III ■ Hawk Tie Wire Anchor CN (with shackle) ■ Hawk Kakutei Tie Wire Anchor (with shackle) ■ Tie Wire Coupling (stainless steel) ■ Hawk Kakutei Anchor ■ Safety Anchor ■ Torsion Nut K/ZK ■ Hawk Stopper Drill *For more details, please refer to the PDF document or feel free to contact us.

• Tool Sets
• Other work tools
• others

A tunnel interior sheet that can be applied simply by peeling off the release film and sticking it on with adhesive.

■NETIS Registration Number: KT-230095-A 【Features】 ■Strong Adhesive Power With a thickness of 300μm in the adhesive layer, it penetrates into concrete due to anchoring effect. ■Visible Inspection of the Lining Surface The lining can be visually inspected through slits provided in the sheet, no equipment like a microscope is needed. ■Easy Installation, Just Peel and Stick No adhesive application process is necessary; simply peel off the release film and stick it on. Repairs can be made with just the sheet and a cutter. ■Easy Cleaning with High-Pressure Washer The interior has excellent cleaning recovery properties, allowing surface dirt to be removed with a standard household high-pressure washer. 【Value Provided by Gainatunnel Interior Sheet】 Unlike traditional interior work, inspections for tile lifting, corrosion of fittings, and loosening of bolts are unnecessary.

• Composite Materials

The expansion-type rock bolt made of reinforcing steel pipes developed by K.F.C. Co., Ltd. contributes to the longevity of tunnels.

This is a new concept tunnel rock bolt that expands due to high water pressure and has a mechanism for securing itself to the surrounding rock. 【Features】 ★ Reliable construction without filling materials ★ It securely anchors to the surrounding rock using the expansion pressure of the steel pipe without using filling materials like mortar. Even in areas with water inflow, it anchors reliably without the influence of cement component leakage. ★ Speedy construction ★ No anchoring materials like mortar are needed, and it anchors simultaneously with construction, contributing to a shortened construction cycle and early strength development. ★ High corrosion-resistant rock bolt ★ The entire length of the bolt is treated with high corrosion-resistant plating, boasting high durability. This contributes to the long lifespan of tunnel structures. *For more details, please download the PDF or contact us.*

• bolt

Making the adsorption layer method simpler. No need for mixing work or quality control of the adsorption layer on site. Construction of slopes is also easy.

The "Padem Sheet" adsorbs harmful substances (heavy metals) in the soil generated during tunnel excavation and construction work, preventing their runoff. The sheet is evenly filled with adsorbent material, and when laid manually, the adsorption layer is completed. Unlike conventional adsorption layer methods that require mixing soil and adsorbent material on-site or managing the quality of the adsorption layer, it achieves reduced construction work and stable quality. It can be cut and pasted to fit the terrain, making it easy to install even on slopes and complex terrains. The seams of the sheet can be welded together without gaps, providing a high runoff prevention effect. 【Features】 ■ Dimensions are 2mm thick × 1.5m wide × 20m long. Can be laid efficiently over a wide area. ■ Heavy machinery is not required during installation. Simply unroll the sheet manually. ■ Adsorbs harmful substances such as arsenic, selenium, lead, cadmium, and fluoride. ■ No concern about uneven distribution of the adsorbent material. *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• others

Inorganic injection-type anchor

- Adhesion strength: It can achieve a tensile force exceeding the yield strength of the anchor bar with an effective length of 7 d.a. - Hardening performance: It hardens in 24 hours due to the use of special cement. - Workability: Being in a capsule type, simply immersing it in water ensures a constant water ratio, making the mixing process smooth. - Constructability: Due to its high viscosity, there is minimal sagging of the injected mortar during horizontal and upward construction. - Corrosion resistance: The entire surface of the anchor bar is covered with anchor fixing material (mortar), providing excellent corrosion resistance. - Safety: As it primarily consists of cement mortar, it is non-combustible and does not contain harmful substances.

• others

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

We will be exhibiting at "CEATEC 2026," which will be held at Makuhari Messe from October 13 to 16. We provide information technology and process informatics (PI) that optimize "how to create" by utilizing physical simulations, AI, and machine learning in process development. We look forward to your visit to our booth. 【Seminar Information】 "Process Informatics for Exploring Optimal Manufacturing Conditions" Date and Time: October 16, 2026 (Friday) 12:45 - 13:00 Venue: Makuhari Messe Exhibition Hall 4 P Stage Speaker: CEO Takaishi Please check the link below for details on our exhibition.