I participated in the "Kochi Hunting Festival."

Realizing the IoT integration of pest capture. AI determines wild boars, deer, and other animals from camera images. The cloud system also makes it easy to view history.

You can set the shooting time from your smartphone or PC (5 times a day). When the set time arrives, it will capture images of wild birds and animals caught in traps such as snares, box traps, and enclosures. The captured still images are sent to the cloud, where AI automatically analyzes the species and notifies you of the identification results via email along with the still images. Since the identification can be made from still images, you can confirm the identity of the wild birds and animals, allowing for more efficient capture operations. Additionally, it enables you to check the feeding status in daily use, further enhancing the efficiency of patrol inspections. 【Features】 ■ The camera is installed at the bottom of the main unit ⇒ You can adjust the shooting angle and check the angle during installation using the built-in small monitor. ■ At night, infrared LEDs illuminate and capture wild birds and animals. *For more details, please contact us through the IPROS inquiry form or by phone. *Mentioning "I saw it on IPROS" will make the explanation smoother. Phone: 088-665-6366 (Contact: Onoe) If you do not have an IPROS-ID, please inquire using the link below. External inquiry form: https://www.densin.co.jp/contact/

• Surveillance Cameras

Realizing the IoT integration of pest capture, it notifies via email when boars and deer are captured in snares, box traps, or enclosures, reducing the burden of patrols.

This is our self-developed "Pest Capture IoT System." 【Renewal Points】 1) Equipped with our self-developed microcontroller communication module board. 2) Comparison with conventional pest capture and notification sensors (compared to our previous model) 1. Achieved miniaturization (41% smaller) 2. Achieved weight reduction (800g → 500g) 3. Compatible with both NTT Docomo and Softbank communication SIMs, making it SIM-free Like the previous model, the sensor can operate for one year on four AA alkaline batteries. It also adopts Michibiki A-GPS to accurately transmit the sensor's location information to the dashboard system. *For more details, please contact us through the IPROS inquiry form or by phone. *If you mention "I saw it on IPROS," the explanation will be smoother. Phone: 088-665-6366 (Contact: Onoe) If you do not have an IPROS ID, please inquire from the link below. External inquiry form: https://www.densin.co.jp/contact/

• Other security and surveillance systems

When wild boars and other animals pass in front of the sensor, it detects them with an infrared sensor and uploads the date, time, location, detection count, as well as weather and temperature to the cloud.

The IoT wildlife detection sensor detects wild boars and other animals passing in front of the sensor using an infrared sensor, and uploads data such as date, time, location, detection frequency, weather, and temperature to the cloud. The detection and installation status is displayed on a map information system on the dashboard. Additionally, we aim to visualize sightings of wildlife through a reporting system from local residents and hunting associations. By combining the detection data stored in the cloud with the data from the sighting information system, we aim for effective capture by installing protective fences and traps in areas with high frequency of wildlife appearances. The device operates for three months on eight rechargeable batteries, and the remaining battery capacity can be checked on the dashboard to determine when to replace the batteries. *For more details, please contact us via the IPROS inquiry form or by phone. *Mentioning "I saw it on IPROS" will facilitate a smoother explanation. Phone: 088-665-6366 (Contact: Onoe) If you do not have an IPROS-ID, please inquire using the link below. External inquiry form: https://www.densin.co.jp/contact/

• Other security and surveillance systems

This year, we are offering a special public release of previously unpublished seminar videos! We have included a wealth of content that will be useful for analysts, ranging from basic explanations to advanced techniques. You can also download technical materials. 【Videos】 Latest GC columns effective for trace analysis and MS application examples Extreme series: GC WAX column edition, medium polarity GC column edition, PLOT column edition, amine-specific GC column edition, and more. 【Materials】 Development of a simultaneous analysis method for 45 components of ultra-short to long-chain PFAS Newly developed! Evaluation of high-inert GC columns (SVOC analysis) Stability evaluation of PFAS standard solutions Development of an analysis method for 21 PFAS components in milk, and more. -------- 【Highlights of the Real Exhibition】 Booth No. 8B-605 In trace analysis, if you are experiencing "low sensitivity" or "the calibration curve bends on the low concentration side," the cause may be the column. Restek's proposed new technology, "RMX GC Column," suppresses adsorption loss in low concentration areas through its unique inertization treatment. It achieves good peak shape and high reproducibility even for compounds at the picogram level, which are difficult to detect with conventional columns. At the booth, we will provide technical explanations along with actual measurement data, and you can also consult about challenges in the analysis field.

Non-specific adsorption (NSA) and non-specific binding (NSB) to metal surfaces are major causes of peak disappearance, sensitivity reduction, and poor reproducibility in the LC MS/MS analysis of pesticides, mycotoxins, and acidic polar compounds. Traditionally, the only way to address these issues was through complex conditioning or "band-aid" solutions using mobile phase additives. In this webinar, we will provide a detailed explanation of how Restek's Inert LC column technology fundamentally resolves these challenges, supported by real data. We will showcase how the Inert series, including Raptor ARC 18 and Raptor Biphenyl, improves peak shape, peak area, and LOD for metal-sensitive compounds, with specific examples from pesticide analysis, mycotoxins, PFAS, and phthalate ester analysis. This content is recommended for anyone involved in multi-component analysis using GC/MS, whether for target or non-target analysis, and for those who are just starting. We will explain it in an easy-to-understand manner for GC/MS beginners. https://attendee.gotowebinar.com/register/1160201828261205080

[Instructor] Takuya Sugawara, Head of AI Business, Sanshin Co., Ltd. [Key Lecture Content] Voices such as "We can't hire people even if we post job openings" and "We don't have the capacity for training" are not uncommon in the management scenes of small and medium-sized enterprises. To break the labor shortage, what is needed is not to increase the number of people but to increase "the capabilities of the employees we currently have." In this seminar, we will organize the use of "AI agents" that take on daily tasks such as document creation and data processing, thereby enhancing the responsiveness of each employee as a management system. We will explain in an easy-to-understand manner the concept of reallocating time gained through efficiency improvements to tasks that have been postponed, such as information gathering, internal analysis, and information dissemination, as well as how to elevate the skills of both veteran and younger employees through dialogue with AI, and provide real examples that illustrate the changes after implementation. This seminar can be utilized as material for business owners and management planners to consider a system that simultaneously balances defensive and offensive strategies.

This is an exhibition introducing another face of Tsujikawa, the 3D modeling business. We provide comprehensive support from the creation of 3D data to modeling and finishing, achieving high-precision three-dimensionalization from sketches and scans of actual objects. We cater to a wide range of needs, including super-large modeling, store fixtures, and character modeling. By combining our experience in embellishing paper and packaging with three-dimensional modeling, we propose the creation of ideal spaces that expand from two dimensions to three dimensions and into space, as only professionals can. We invite you to visit the Tsujikawa booth. *Osaka Industrial Creation Center, 3F Market Plaza, Booth No. 30

[Speaker] CEO of AnPrenergy Co., Ltd. Director of the Japan Renewable Energy Regional Resource Development Organization, Mr. Takashi Muratani [Lecture Items] 1. Starting with three questions from the field 2. September 1, October 1, and the next - System changes coming in three stages 3. Viewing "distortions" through numbers 4. Pathways to prevention - Three markets + Negativity-Positivity type distribution 5. Defensive operations and system risks 6. Summary - Two changes by 10/1, three adjustments by the end of the year 7. Q&A / Business card exchange *As a seminar participation benefit, a "Management Checklist" will be provided.