Our video has been featured on the official YouTube channel of the Ministry of Agriculture, Forestry and Fisheries, maffchannel.

Realizing the IoT integration of pest capture. AI determines wild boars, deer, and other animals from camera images. The cloud system also makes it easy to view history.

You can set the shooting time from your smartphone or PC (5 times a day). When the set time arrives, it will capture images of wild birds and animals caught in traps such as snares, box traps, and enclosures. The captured still images are sent to the cloud, where AI automatically analyzes the species and notifies you of the identification results via email along with the still images. Since the identification can be made from still images, you can confirm the identity of the wild birds and animals, allowing for more efficient capture operations. Additionally, it enables you to check the feeding status in daily use, further enhancing the efficiency of patrol inspections. 【Features】 ■ The camera is installed at the bottom of the main unit ⇒ You can adjust the shooting angle and check the angle during installation using the built-in small monitor. ■ At night, infrared LEDs illuminate and capture wild birds and animals. *For more details, please contact us through the IPROS inquiry form or by phone. *Mentioning "I saw it on IPROS" will make the explanation smoother. Phone: 088-665-6366 (Contact: Onoe) If you do not have an IPROS-ID, please inquire using the link below. External inquiry form: https://www.densin.co.jp/contact/

• Surveillance Cameras

Realizing the IoT integration of pest capture, it notifies via email when boars and deer are captured in snares, box traps, or enclosures, reducing the burden of patrols.

This is our self-developed "Pest Capture IoT System." 【Renewal Points】 1) Equipped with our self-developed microcontroller communication module board. 2) Comparison with conventional pest capture and notification sensors (compared to our previous model) 1. Achieved miniaturization (41% smaller) 2. Achieved weight reduction (800g → 500g) 3. Compatible with both NTT Docomo and Softbank communication SIMs, making it SIM-free Like the previous model, the sensor can operate for one year on four AA alkaline batteries. It also adopts Michibiki A-GPS to accurately transmit the sensor's location information to the dashboard system. *For more details, please contact us through the IPROS inquiry form or by phone. *If you mention "I saw it on IPROS," the explanation will be smoother. Phone: 088-665-6366 (Contact: Onoe) If you do not have an IPROS ID, please inquire from the link below. External inquiry form: https://www.densin.co.jp/contact/

• Other security and surveillance systems

When wild boars and other animals pass in front of the sensor, it detects them with an infrared sensor and uploads the date, time, location, detection count, as well as weather and temperature to the cloud.

The IoT wildlife detection sensor detects wild boars and other animals passing in front of the sensor using an infrared sensor, and uploads data such as date, time, location, detection frequency, weather, and temperature to the cloud. The detection and installation status is displayed on a map information system on the dashboard. Additionally, we aim to visualize sightings of wildlife through a reporting system from local residents and hunting associations. By combining the detection data stored in the cloud with the data from the sighting information system, we aim for effective capture by installing protective fences and traps in areas with high frequency of wildlife appearances. The device operates for three months on eight rechargeable batteries, and the remaining battery capacity can be checked on the dashboard to determine when to replace the batteries. *For more details, please contact us via the IPROS inquiry form or by phone. *Mentioning "I saw it on IPROS" will facilitate a smoother explanation. Phone: 088-665-6366 (Contact: Onoe) If you do not have an IPROS-ID, please inquire using the link below. External inquiry form: https://www.densin.co.jp/contact/

• Other security and surveillance systems

In civil engineering sites, steel plates have traditionally been the standard, but in recent years, more companies are choosing wooden mats to suit site conditions. Hyper CLT mats, utilizing wood CLT as civil engineering materials, are being introduced for a wide range of applications including public works, temporary roads, access routes, material yards, and temporary parking lots. The reasons for their selection are not simply because they are "made of wood." The 5×10 panels weigh about 230 kg, making them lightweight and easy to install and remove even with small machinery, with a maximum capacity of 40 panels on a 10-ton truck. This also leads to improvements in workability and transportation efficiency. Furthermore, they add different values to the site compared to steel plates, such as reducing glare and radiant heat, noise control, CO2 fixation, and consideration for aesthetics. They can be partially used only where needed, allowing for differentiation in use from steel plates. This technology is registered with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS, with the registration number "TH-250021-A." The introduction of Hyper CLT mats is expanding as a new option that combines wood, NETIS, and civil engineering.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs can change the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repairs without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs can cause changes in the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.