Notice of Participation in JIMTOF 2022

We provide a comprehensive solution specialized in functional testing and EoL (End of Line) testing for various types of electric motors.

We handle "Test Systems for Electric Motors." To maintain the high quality of electric motors, which consist of rotors and stators, it is necessary to apply technical methods used in the production process for measurement and inspection. The product lineup from e.d.c. includes systems customized for inline and offline testing that enable various electrical tests during the development and manufacturing stages of electric motors and their components, allowing for the detection of insulation failures. 【Product Lineup】 ■ Stator testers for production lines (winding and hairpin) ■ Test benches for various types of rotors: permanent magnet, re-skewed, and direct winding ■ Automatic EoL motor testers with LOAD/NO LOAD testing ■ Motor load testing and lifespan simulation cycles for laboratories ■ Advanced winding and insulation quality analyzers for laboratories *For more details, please refer to the PDF materials or feel free to contact us.

• Other motors
• Other Auto Parts
• Testing Equipment and Devices

Regardless of machine dimensions or types of processing, by selecting suitable sensors and system configurations, we can detect minute defects in the micron range inline. Zero defective products!

The X series offers options for both press and rolling applications. The 'X3s (for press)' supports calibration of sensor waveforms with a maximum of 10 points and features an intelligent monitoring system equipped with a high-resolution 9-inch touch display. It is used for process monitoring, enabling optimization of production processes and improvement of work quality. Additionally, it has a positive impact on the entire machine. With multiple counter functions, it allows for detailed management and analysis of production. Furthermore, it can monitor process signals and display peak values, envelope curves, trends, and process quality.

• Other measurement, recording and measuring instruments

Easily manage the surface temperature of molds! Contributes to the stabilization of die-cast product quality (compatible with mega/giga casting) [*Demo available].

"TTV (Total Thermal Vision)" is an infrared vision system designed to monitor the surface temperature of molds during the die-casting process. The thermographic camera built into the machine applies infrared visual technology to monitor the thermal map of the mold surface in real-time. It visualizes the processing steps and contributes to the optimization of release spray and lubrication processes during die-casting production. Additionally, the system consists of a controller unit and a thermographic camera unit, both designed to operate in particularly harsh foundry environments. 【Features】 ■ Stabilization of quality ■ Reduction of process costs (decrease in the number of waste shots) ■ Extension of mold lifespan ■ Optimization of cycle time ■ Improvement of system efficiency (OEE enhancement) ■ Analysis of process variables and errors ■ Reduction of unexpected process stoppages *Demonstrations are available. Please feel free to inquire. For detailed specifications, please download the PDF and take a look.

• Other measurement, recording and measuring instruments

The display format is simple and easy to operate! You can create programs for the operating cycle in an interactive format.

"BLU" is an innovative modular machine tool monitoring/process control system. This system is the result of 50 years of experience in managing and optimizing machine tool work processes. It consists of a series of connected functional nodes. These functional nodes form a unique network using a single bus managed by a master node, and are typically installed within the machine's cabinet. 【Features】 ■ Interactive creation of operating cycle programs ■ Simple display format and easy operation ■ Composed of a series of connected functional nodes ■ The result of 50 years of experience in managing and optimizing machine tool work processes ■ Designed to maximize integration with machine tools *For more details, please refer to the PDF materials or feel free to contact us.

• Other process controls

Equipped with a cover lens touch screen on the surface! Easy to install on machines and dedicated measurement benches.

The new electronic gauge "P3DME," when connected to the Marposs measuring head, becomes an economical, compact, practical, and reliable solution for controlling workpiece dimensions during the production process. When connected to the measuring head, it provides immediate feedback to the machine tool. This compact gauge is equipped with a touch screen covered by a lens on the surface. It can be easily installed on any machine tool or dedicated measuring bench, and it immediately controls the workpiece as soon as machining begins. 【Features】 - Intuitive and flexible, making daily tasks easy - Checks the machining status and provides compensation information back to the machine tool instantly - Equipped with a touch screen covered by a lens on the surface - Easy to install on machines or dedicated measuring benches - Excellent flexibility due to the ability to use various industrial protocols *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

Achieve high-precision non-contact measurement in seconds <Test measurement of workpieces available (please inquire)>

OptoFlash achieves high-precision measurements by acquiring and analyzing optical images. It enables fast and accurate measurements in production environments of small parts where high precision is required, such as in automotive, general manufacturing, aerospace, and medical fields. It is particularly suitable for dimension verification of electric motor shafts, electronic connectors, hydraulic circuit components, screws, and more. <Main Features> 1. Ultra-fast - The 2D optical technology enables a reduction in cycle time. - The cycle time is remarkably fast, executing 100 static measurements in just 2 seconds. 2. High flexibility - Capable of measuring a wide variety of shapes, from bolts to small shafts. - Achieves static and dynamic measurements of outer diameter, length, roundness, cylindricity, coaxiality, taper, grooves, chamfers, R (shape), shaft runout, screw dimensions, etc., in just a few seconds. 3. Ease of use - The measurement screen is user-friendly while equipped with multi-level access features, allowing level settings according to the operator's tasks and permissions. - Open loading without doors enables robot compatibility, allowing for automation without the need for an operator. 4. Durability - The fixed position of the 2D sensor eliminates mechanical stress. Measurement performance remains consistently stable over millions of cycles. - The need for maintenance is also minimized.

• Other measurement, recording and measuring instruments
• Other inspection equipment and devices
• Optical Measuring Instruments

Supports on-site productivity with a superior balance of measurement performance, speed, and versatility.

OptoQuick captures and analyzes optical images to measure various workpieces such as cams, cranks, gears, and drive shafts with high precision and in a short time. <Main Features> 1. High Speed and High Precision - Achieves accurate and stable high-precision measurements in seconds using cutting-edge image processing technology. 2. High Flexibility - Capable of measuring various parts with a single unit, allowing for the production of different workpieces in the same manufacturing area. - Excellent operability, with measurement results that are easy to understand, enabling efficient and rapid work. 3. Multi-Sensor - In addition to optical sensors, it supports measurements of various shapes such as holes, shaft runout, cams, and half-strokes using three types of contact sensors. - Combining contact and non-contact technologies creates significant synergies. 4. Improved Workability - By installing it right next to the manufacturing machine, it reduces unnecessary time spent on moving and verifying parts. - Easily accommodates new parts by simply adding configuration files.

• Other measurement, recording and measuring instruments

To streamline the quality control of shafts and fastening components, and to eliminate setup time. A free online seminar on non-contact measurement will be held.

Our company offers a non-contact measurement solution that contributes to the realization of a flexible line through "OptoQuick" and "OptoFlash." "OptoQuick" enables precise non-contact scanning using optical sensors. It can measure eccentric workpieces, crankshaft pin bearings, joints, and more with high reliability. Additionally, it can be used very close to machine tools, contributing to faster quality inspections. It boasts excellent operability, allowing for easy setup changes and modifications to measurement programs. The "OptoFlash" for small parts excels in measurement speed due to the absence of vertical movement of the sensor and workpiece, executing 100 static measurements in just 2 seconds. 【We respond to the following needs】 ◎ Considering the introduction or switch to a non-contact measurement solution ◎ Planning to eliminate setup times and mix flows for a variety of products ◎ Wanting to enhance traceability while conducting flexible production ★ We are holding a free online seminar on non-contact measurement solutions. Please refer to the basic information section or materials for seminar details. *Detailed information on each product can be viewed via PDF download.

• Other measurement, recording and measuring instruments

Benchtop type! Can be used easily and quickly, reducing inspection time and improving measurement performance.

The "SUPER-MECLAB+.T40" is a high-precision measuring instrument for ultra-high precision outer diameter measurement of workpieces with odd and even blades/grooves. It allows for checking of workpieces with odd blades and grooves. It can be used extremely easily and quickly, reducing inspection time and improving measurement performance. Additionally, it has high flexibility and can measure various components and dimensions without the need for system presets or remastering. 【Features】 ■ Zero error due to hysteresis (reversal error) commonly seen in all dial indicator gauges ■ Non-contact measurement: does not damage or scratch the workpiece ■ Objective and highly reproducible measurement results that do not depend on the operator's skill ■ Capability to check workpieces with odd blades and grooves *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• Other measurement, recording and measuring instruments

Achieving high-speed and wide-ranging non-contact/non-destructive measurement on various surfaces.

SOLARIUS VIKING is a compact and lightweight optical 3D surface roughness and shape measurement device. By using sensors for measurement, it allows for a different approach compared to traditional microscopes. It is particularly suitable for customers facing challenges in measuring the surface roughness and thickness of materials that are thin, soft, and prone to scratches, such as wafers and lithium-ion battery separators. Utilizing advanced sensor technology, it quickly provides 3D surface topography maps and measurement results compliant with international standards. Additionally, its compact design saves space. With easy setup and high operability, it allows for quick configuration of the 3D optical inspection process, contributing to a reduction in operator workload. More measurements can be conducted in a shorter time. 【Suitable for customers with the following challenges】 - Looking to improve visual tasks or manual measurements - Wanting user-friendly equipment for anyone - Needing machine alignment (tilt or misalignment) - Seeking detailed understanding of measurements and data management - Searching for special applications that require customization *We also welcome inquiries regarding sample measurements. Please feel free to contact us.

• Lithium-ion battery
• Wafer
• Optical Measuring Instruments

Ultra-high precision worldwide wireless touch probe system

The WRP45P/WRP60P is a high-precision probe equipped with a wireless transmission system from Marposs. This probe automatically detects the position of the machine axis, allowing anyone to perform work positioning and high-precision measurements. The T25P, based on piezoelectric technology, guarantees remarkable accuracy and a repeatability of within 0.25 μm (2σ). With its wireless transmission system, the operational range is wide at 15 m, making the WRP45P/WRP60P ideal for large machines. Furthermore, by adopting a modular design, the WRP45P/WRP60P can inspect complex surfaces and deep hole workpieces that are difficult to access by using extensions of up to 1 m in length. The WRP45P/WRP60P operates through a WRI receiver via a 2.4 GHz wireless transmission. It is designed to avoid interference as much as possible with a 79-channel DSSS (Direct Sequence Spread Spectrum) security system.

• lathe
• Milling machine
• Grinding Machine

Display measurement results at hand! Reliable measurements can be made even in harsh field environments.

The "i-Wave2" is a rechargeable wireless handle equipped with a 1.8 TFT color screen. Thanks to its automatic screen rotation, operators can intuitively recognize measurement values from any direction on the graphical 1.8 TFT color display. Additionally, during live measurements, values are displayed simultaneously on both the handle and the gauge computer. By simply pressing either of the two measurement switches, data is automatically saved within the gauge computer for statistical analysis. 【Features】 ■ Smooth synchronization with the gauge computer ■ Measurements can be taken with the gauge alone without connecting to the gauge computer ■ Reliable measurements even in harsh field environments ■ Contains a long-lasting, fast-charging Li-Ion battery ■ Can be comfortably used at any time with the induction charging stand *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Other inspection equipment and devices

Design that meets needs and reasonable prices! It has excellent features.

"Duo" is a high-quality 4.3-inch electronic display unit that allows for simple applications to be performed intuitively and quickly. It is suitable for simple manual applications when only minor measurements are needed on-site. Additionally, collected data can be transferred via a USB port or an optional field bus port, and it can also be stored in the built-in flash memory. 【Features】 ■ Extremely compact and powerful, like a smartphone ■ Equipped with 2 sensor input channels, allowing simultaneous display of two measurement values ■ The system is easy to configure and provides clear visualization of measurement status ■ Suitable for situations requiring minor measurements on-site ■ Designed to meet needs at a reasonable price *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Other production management systems

Opportunities for preventive maintenance of peripheral devices and process monitoring are possible! Additionally, highly reliable data can be obtained.

"GEMVM" is a standalone module that enables preventive maintenance of machines, peripheral equipment, and other systems through vibration monitoring and temperature monitoring. By detecting collisions and activating alarms quickly (in less than 1 ms), it maximally protects against damage caused by collisions. Based on available sensor signals and defined processing, it performs predictive maintenance, detects tool imbalance, and conducts simple tool/process monitoring. Additionally, when combined with the VA-3D MG sensor, it can measure up to 3-axis gravitational acceleration. 【Features】 ■ Detects damage to spindle bearings and wear or defects in drive shafts ■ Detects vibrations and tool imbalance during machining processes ■ Minimizes damage ■ Visualization and analysis of measurement data ■ Detects incorrect cutting parameters *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

When a collision occurs, the stop signal is activated within 1 ms! It minimizes damage as much as possible.

"GEMCMS" is a highly efficient tool designed to minimize damage caused by collisions. It reduces crash detection time to under 1ms, allowing for valuable time savings and enabling the execution of stop commands in an even shorter time. Additionally, special sensors detect any slight μ-range distortions within the machine structure caused by forces acting on each axis of the spindle. [Features] ■ Minimizes subsequent damage due to programming, setup, and operational errors ■ Reaction time is under 1ms, faster than any NC overload device ■ Capable of detecting both severe collisions and non-impact (quasi-static) collisions ■ Extends machine lifespan ■ Increases machine operating rate *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

Essential for economically efficient production! Introduction of autonomous intelligent tools and process monitoring systems.

We would like to introduce our tool and process monitoring system, 'GEMCPU'. The modular system utilizes all relevant process signals and data from machine tools, reacting in real-time after an event occurs. The system captures digital measurement data via a fieldbus interface or sensors, evaluates the data based on multiple criteria, and visualizes the process transparently. Trend or alarm reports enable users to optimize processes and produce more efficiently. 【Features】 ■ An economical solution even for simple applications ■ Can acquire up to 16 real-time measurement signals on up to 10 NC channels in parallel with the process ■ Virtually no need for troublesome adjustments or re-calibrations of the machine ■ Process signals are recorded and can be monitored online or offline * You can view the English version related link page. * For more details, please refer to the PDF materials or feel free to contact us.

• Other electronic parts

An ideal solution for detecting process anomalies during metal cutting with machine tools!

"GEMTP" is a power measurement module suitable for tool and process monitoring to avoid damage to workpieces. It supports 127 types of cycles and can connect to all machine controls via I/O signals. With multiple monitoring strategies (static, dynamic, area), it can be applied to various cutting processes. 【Features】 ■ Single-channel system for drive monitoring ■ Monitoring of tool conditions (breakage, wear, missing) ■ Supports 127 types of cycles ■ Can connect to all machine controls via I/O signals ■ Easy installation in control cabinets *For more details, please refer to the PDF materials or feel free to contact us.

• Other electronic parts

We will be exhibiting at the "1st [Nagoya] High-Performance Plastics Exhibition -PLASTIC JAPAN-" held at Port Messe Nagoya. We will introduce samples and characteristics of our carbon nanofibers blended with various resins. The conductive carbon nanofiber (high dispersion) ALP-NK1 (550W/mK) has also been added to our product lineup, and we will propose materials tailored to customer needs, starting with heat dissipation applications. Additionally, we will showcase extruded round bars of PEEK blended with carbon nanofibers and their processed products, as well as doctor blades designed for battery materials. As a business model for our nanomaterial business, we offer sales of CNF powder and prototype sales of resin blends (pellets and liquid resins) according to customer requests. Furthermore, we will introduce various silicon materials, including silicon monoxide, which is gaining attention as electrode materials for high-capacity lithium-ion secondary batteries, as well as magnesium balls. We welcome various requests regarding compounds, alloys, purity, particle size, and shapes, so please feel free to stop by our booth for consultation. We sincerely look forward to your visit.

Our company will be exhibiting at the "Fukushima Tech Create 2026 Results Presentation" held in Okuma Town, Fukushima Prefecture. At this event, promising startups aiming for entrepreneurship and technological development in areas such as Hamadori, Fukushima Prefecture, will present their research and business results. ★ Participating Industry Fields Decommissioning / Robotics and Drones / Energy, Environment, and Recycling Agriculture, Forestry, and Fisheries / Medical-related / Aerospace On the 29th (Thursday), a talk event featuring notable figures and local entrepreneurs will also be held. A collection of attention-grabbing technologies that will shape the future will be gathered, so please feel free to stop by the IIDA booth when you visit. [Limited Company Iida Seisakusho Fukushima No. 2 Factory] 〒969-1204 21-2 Mizukami, Nukazawa, Motomiya City, Fukushima Prefecture TEL: 0243-64-2320 FAX: 0243-64-2571

Ito Corporation will be exhibiting at "CPhI Japan" held at Tokyo Big Sight. CPhI Japan (International Pharmaceutical Development Exhibition) is one of the largest international exhibitions in Japan, covering the entire supply chain of the pharmaceutical industry, from new drug development and generic drugs to biopharmaceuticals, manufacturing, and packaging. We will be showcasing the "Gloves for Glove Boxes/Isolators" manufactured by Tron Power. We look forward to your visit.

In this seminar, we will explain how to organize requirements for the introduction of mcframe, incorporating perspectives unique to the manufacturing industry. We will provide practical tips useful for business, such as balancing the application of standard package functions with add-ons and customizations, and a practical approach to prioritization. <Program> - Introduction - Learning from failure cases: "Pitfalls" of core system renewal and their countermeasures - The first step towards core system renewal: Organizing requirements <Recommended for> - Those who are exploring what to start with for DX - Business owners and managers in the manufacturing industry, and those responsible for management innovation - System personnel interested in the future of core systems *We may refuse applications from competitors in the same industry or those not eligible to participate.

Ito Corporation will be exhibiting at "INTERPHEX Week Tokyo" held at Makuhari Messe. This exhibition is the largest in Japan, showcasing a wide range of products and services related to the research and manufacturing of pharmaceuticals, cosmetics, and regenerative medicine from 25 countries and regions around the world. Pharmaceutical and cosmetic manufacturers, as well as regenerative medicine companies, will be attending from all over the globe. We will be showcasing "Gloves for Glove Boxes/Isolators" manufactured by Tron Power. We look forward to your visit.