Notice of Participation in the 25th Kansai Manufacturing World / 25th Mechanical Components Technology Exhibition

Replaceable with O-rings and oil seals! Performs well in harsh environments requiring no lubrication, extreme low temperatures, chemical resistance, and heat resistance!

The "spring-loaded seal" is a high-performance seal that combines a PTFE-based jacket with a corrosion-resistant metal spring. The PTFE jacket has excellent chemical resistance and a wide temperature range, and the metal spring accommodates deformation due to wear and shrinkage or expansion of the seal. It can replace O-rings and oil seals, contributing to the high performance of gas and liquid handling equipment. There is a rich lineup, including options like the "scraper lip," which emphasizes scraping ability. We can propose suitable seal shapes and materials based on fluid, pressure, temperature, and motion conditions. 【Features】 ■ Compatible with both fixed and moving applications ■ Excellent resistance to chemicals and organic solvents ■ Usable at low temperatures of -268°C and high temperatures above 300°C ■ Usable in high vacuum and high-pressure environments ■ A wide variety of materials for jackets and springs *We are currently offering explanatory materials that include basic knowledge about this product and examples of its implementation. Please check it out from "PDF Download." If you would like a product sample, please feel free to contact us.

• Sealing

Introducing high-performance rotary joints using various sealing methods! Customization to meet specifications is also possible! We can accommodate challenging specifications!

◆ Center Through Coolant Rotary Joint 'ROTODISK' - Compatible with high-speed spindles up to 42,000 min-1 - Supports high-pressure coolant at 20 MPa + dry air/dry run with the same unit - Capable of handling large flow coolant up to 120 ℓ/min ◆ High-Speed Rotary Table Rotary Joint 'ROTOSTAT' - Achieves low torque and long-term maintenance-free operation through "non-contact seal technology" - Provides a high-function model with a multi-port rotary joint including the spindle cooling circuit ◆ Composite Integrated Rotary Joint 'ROTOKOMBI' - Capable of simultaneous supply and discharge of different fluids - Integrated model available that combines a rotary joint with a slip ring for power and signal transmission *For more details, please refer to the PDF document or feel free to contact us.

• joint

Just attach it to the piping! The valve opens and closes automatically in response to temperature! No power source like electricity is needed!

The freeze prevention valve "HAT/FP" automatically opens and closes the valve by sensing the temperature of the water, preventing damage to water pipes caused by freezing. It can be used simply by attaching it to existing piping, without the need for any power sources such as electricity, hydraulic, or pneumatic systems. It easily prevents human errors such as forgetting to open the valve, which can lead to freezing and damage, and protects the piping over the long term. 【Features】 ■ No need for traditional freeze prevention measures like trickling water ■ Robust and long-lasting due to the integrated structure of the temperature sensing and valve components ■ Capable of responding to sudden cold waves ■ The valve opens and closes in response only to temperature, unaffected by fluid pressure ■ Operating temperature range is from 4.4°C (fully closed) to 1.7°C (fully open) *For more details, please refer to the PDF document or feel free to contact us.

• valve

Short delivery response! High-pressure stainless steel filters that meet various needs!

3B Filters (USA) offers high-pressure stainless steel filters as standard catalog items. We keep them in stock as parts and can respond with short lead times. If you are having trouble with filters, please feel free to contact us! - "I am dissatisfied with the pressure resistance of the current filter." - "I can't find a filter with the desired filtration accuracy." - "I am looking for a stainless steel (SUS316, etc.) filter." - "I can't find a filter that can be used for high flow rates." - "I am considering a compact high-pressure filter." - "I would like to consider catalog items with short lead times." - "I want to reduce maintenance frequency." 【Features】 - All stainless steel filters capable of handling pressures from 6000 psi (41 MPa) to 20000 psi (137 MPa) as standard catalog items! - Custom models can handle up to 40000 psi (275 MPa). - The manufacturer keeps a large stock of parts and can respond with short lead times. - A lineup that meets various needs (T-type and inline type).

• filter

A special temperature measuring set screw that indicates the maximum reached temperature!

"Templug" is a small screw-like component that can be installed in movable parts or intricate areas where conventional temperature measurement devices are difficult to use. It is installed by cutting a tap into the movable parts of the engine (such as pistons and blades) and operated in a screwed-in state. After a certain exposure to temperature, it can be removed and analyzed by the manufacturer to determine the maximum temperature reached at the installation site. The analysis at the manufacturer involves measuring the hardness changes of the screw due to the quenching effect and cross-referencing with a database. [Features] ■ Analyze the actual maximum temperature reached in intricate areas and small components where traditional temperature measurement methods are challenging! ■ The measurable temperature range is from 100°C to 850°C! * The minimum measurable temperature may vary depending on the maximum temperature exposure time. Please consult us.

• Temperature and humidity measuring instruments

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

We will be exhibiting at "CEATEC 2026," which will be held at Makuhari Messe from October 13 to 16. We provide information technology and process informatics (PI) that optimize "how to create" by utilizing physical simulations, AI, and machine learning in process development. We look forward to your visit to our booth. 【Seminar Information】 "Process Informatics for Exploring Optimal Manufacturing Conditions" Date and Time: October 16, 2026 (Friday) 12:45 - 13:00 Venue: Makuhari Messe Exhibition Hall 4 P Stage Speaker: CEO Takaishi Please check the link below for details on our exhibition.