Notice of Participation in JIMTOF2022, the 31st Japan International Machine Tool Fair, from November 8 (Tuesday) to November 13 (Sunday), 2022.

Removes oil, dirt, and chips remaining in the tap hole in just an instant. The Tornado Air Nozzle contributes to improved work efficiency! [Video introduction available]

Ando Corporation, a comprehensive trading company for machinery, cutting, and measuring tools, handles the "Tornado Air Nozzle." This product completely removes oil, dirt, and chips that remain in taps and holes. It can reduce air flow and working time. Additionally, it accommodates hole diameters from M4 to M14L. Special diameter nozzles are also available. 【Features】 ■ Reduction of air flow ■ Safety ensured with a shield ■ Reduction of working time ■ Noise reduction effect *For more details, please refer to the PDF document or feel free to contact us.

• Other machine tools

<MECT Exhibition> Easy and low-cost! Achieved approximately 50 blows per second with a 35% reduction in air flow! *Demo units available for loan!

The "Smart Pulse Gun A-SPG" is a pulse gun that is effective in reducing fixed electricity costs. Achieving approximately 50 blows per second!! This product contributes to reducing air usage, decreasing compressor operation, and lowering power consumption! 【Features】 ■ 35% reduction in air flow ■ Excellent energy-saving nozzle ■ Compact and lightweight design ■ Suitable for ISO proposal products ■ Complies with OSHA safety standards ～★ Currently, we are offering a limited number of demo units for loan ★～ *For more details, please download the PDF or feel free to contact us.

• Other machine elements

<Exhibited Product at JIMTOF 2024> High-speed rotation of glass repels coolant, allowing for a clear view! 'VisionLine'

The UYAR VisionLine RWC 2.0 is a specialized camera for machine tools that enables visualization inside the machine. It is a groundbreaking product that allows you to check the operating status and cutting conditions from within the machine. *Compatible with water-soluble and oil-based cutting fluids. Unlike typical waterproof cameras, its mechanism is significantly different. The glass on the front of the camera rotates at high speed, preventing fogging from splashes of cutting oil, allowing for clear images to be viewed in real-time. ~ You can see actual operation images and camera footage in the video below! ~ 【Features】 ■ Robust design made of aluminum ■ Provides ideal lighting ■ Energy-efficient power LED with a total of 208 lumens ■ Special high-speed rotating glass repels coolant ■ Allows real-time confirmation of production status in high-resolution images via HDMI This product was also exhibited at JIMTOF 2024. During the event, a camera was installed inside a machining center, showcasing footage of the machining process. *For more details, please refer to the PDF document or feel free to contact us. *Ando Co., Ltd. is an official partner of the German company UYAR.

• Other machine tools

<MECT2023 Exhibition> A breaker shape that looks like a chip with corners, allowing chips to scatter during cutting! Prevents chip entanglement and increases productivity.

The "Unicorn Chip," a non-ferrous turning PCD chip equipped with a 3D breaker, handled by Ando, is a "cutting chip" for non-ferrous metals such as aluminum alloys, brass, and copper. (Lineup... VBMT, DCMT, CCMT, TPGW) The breaker shape, resembling corners sprouting from the PCD diamond, significantly improves the reliability of chip (kiri, kiriko, cutting chips) handling! It helps suppress machine downtime due to chip entanglement and reduces workpiece defects, contributing to increased productivity. *Product specifications can be confirmed via [PDF download]. Please feel free to contact us for more details. 【Exhibition Information】 ■Exhibition Name: Mecatrotech Japan 2023 ■Period: October 18 (Wed) - October 21 (Sat), 2023 ■Venue: Port Messe Nagoya ■Booth Number: 3D11 Please come and see the actual products at our booth! - Camera for machine tools "VisionLine RWC2.0" - Robot hand "A hand / Robot hand A hand" - Air consumption reduction with pulse blow "Smart Pulse Gun" - Removal of dirt from tapped holes "Tornado Air Nozzle"

• Other cutting tools

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

At Eihon Seiki, we handle Brookfield's type B viscometers from the United States, which are loved by many users. In addition to selling equipment, we also provide consulting services such as suggestions for measurement methods and data analysis, as well as services like calibration and repair, to better assist our customers. This time, we will hold a workshop as an additional opportunity to serve our customers. It will be conducted in Tokyo and Osaka for those using Brookfield viscometers. Program (Tentative) - "Basics of Viscosity and Types of Viscometers" - "Points to Note in Viscosity Measurement: Improving Reproducibility" We will review the basics of viscosity and types of viscometers, and share key points for accurate viscosity measurement. Additionally, we will introduce the lineup and functions of Brookfield viscometers and their options. - "Calibration and Inspection of Viscometers" We will discuss the concept of viscometer certification and the inspections to verify the reliability of daily measurements. - "Q&A Session" You can directly ask our technical staff questions. *For questions that may be difficult to ask during the Q&A session, we will provide time for individual consultations after the program concludes.

At Eihon Seiki, we handle Brookfield B-type viscometers from the United States, which are loved by many users. In addition to selling equipment, we also provide consulting services such as suggestions for measurement methods and data analysis, as well as services like calibration and repair, to better serve our customers. This time, we will hold a workshop as an additional opportunity to serve our customers. It will be conducted in Tokyo and Osaka for those using Brookfield viscometers. Program (Tentative) - "Basics of Viscosity and Types of Viscometers" - "Points to Note in Viscosity Measurement: Improving Reproducibility" We will review the basics of viscosity and types of viscometers, and share key points for accurate viscosity measurement. We will also introduce the lineup and functions of Brookfield viscometers and their options. - "Calibration and Inspection of Viscometers" We will discuss the concept of viscometer certification and the inspections to confirm the reliability of daily measurements. - "Q&A Session" You can directly ask our technical staff questions. *If there are questions that are difficult to ask during the Q&A session, we will provide time for individual consultations after the program ends.

Our company is a manufacturer of processing materials such as rubber, plastic, and sponge, which are softer than metal. In particular, our rubber cutting processing that does not require molds is a rare technology even in Japan, and the samples of this processing are a must-see! Please take a look and confirm the precision, appearance, and finish that can be achieved through cutting processing.

We held a technical training session for the Keltec 8000 series. Thank you very much to everyone who participated. ■ Main Content: - What is the Kjeldahl method? - Introduction to the principle structure of the device, each module, and flow path - Maintenance methods - Common troubles and how to address them - About spare parts - Disassembly procedures and precautions for the device - Introduction to the Keltec 9 ■ Target Participants: - Users currently using the Keltec 8000 series - Users considering purchasing the successor model, the Keltec 9 series For inquiries, please contact us at 03-5962-4811. ------- At Foss Japan, in addition to training sessions and workshops to ensure the safe use of our devices, we hold many events throughout the year. In seminars and open houses tailored to specific industries and analytical technologies, we introduce Foss's latest analytical solutions. -------