Notice of participation in "JIMTOF2022" from November 8 (Tuesday) to November 13 (Sunday), 2022.

Lubricity, heat resistance, and oxidation film have further evolved! *We are currently offering materials that detail evaluation cases and functions.

The versatile cutting coating "Jupiter Coat" has further enhanced its lubrication, heat resistance, and oxidation coating! 【Features】 ■ Compatible with a wide range of workpiece materials and hardness! ■ Suitable for both wet and dry processing. ■ Performs well even in general cutting applications. *For evaluation cases and detailed functions of Jupiter Coat, please download the PDF or feel free to contact us.

• Processing Contract
• Surface treatment contract service
• Other cutting tools

Soft steel, woodworking, non-ferrous cutting ultra-lubricating PVD coating "Prime Coat C"

<Overview> We have successfully developed a new ultra-lubricating coating composition that far exceeds conventional PVD norms, achieving high lubrication performance while maintaining heat resistance comparable to TiAlN. This coating prevents edge welding of materials during soft steel processing, resulting in smooth and beautiful cutting performance. ★ Four Key Points of Prime Coat-C ★ 1. Significantly improves lubrication without compromising heat resistance and wear resistance. 2. Demonstrates high performance in cutting a wide range of materials from 20 to 50 HRC. 3. High lubrication facilitates chip removal and reduces adhesion to the cutting edge. 4. High heat resistance allows for application in dry cutting. ★ Excellent Features of Prime Coat-C ★ Prime Coat-C has a friction coefficient of less than 0.3 and a hardness of over 2800 HV. ★ Outstanding Cutting Performance of Prime Coat-C ★ In high-speed cutting operations, Prime Coat-C showed cutting life far exceeding that of TiAlN films. *For more details, please refer to the catalog or contact us.* ★ We also accept inquiries for sample coatings ★

• Processing Contract
• Other cutting tools
• others

Achieved unprecedented "heat resistance and oxidation resistance" and "high hardness."

"Prime Coat-T - High Hardness and Heat-Resistant Oxide Coating" has achieved unprecedented "heat oxidation resistance" and "high hardness" through a new composition of heat-resistant coating that far exceeds conventional wisdom. It demonstrates outstanding performance in high-speed machining and dry processing of high-hardness steel. It has made possible high-speed cutting at levels above 60HRC, which were previously unattainable. It allows for efficient machining of high-hardness materials and contributes to reducing machining costs. 【Features】 - Achieves high-speed cutting above 60HRC, a realm previously deemed impossible. - Enables efficient machining of high-hardness materials, contributing to reduced machining costs. - Exhibits exceptional performance in dry processing due to heat oxidation resistance above 1100°C. - Superior heat oxidation resistance significantly extends cutting performance in high-temperature ranges compared to conventional coatings. - Applicable in the mold industry, where high heat oxidation resistance is required. *For more details, please download the PDF or feel free to contact us.

• Processing Contract
• Surface treatment contract service
• Other cutting tools

Superior adhesion and durability that surpasses conventional DLC films! Enables film formation on aluminum and ceramics!

"Neo-Slick" is a coating technology that maintains the high hardness of DLC films while enhancing adhesion and durability, achieving a longer lifespan for the substrate. It is compatible with non-ferrous metals such as aluminum and brass, as well as substrates like ceramics, making it recommended for machine parts, cutting tools, and molds. Moreover, it excels in mass production. 【Basic Film Properties】 Color: Black Film Hardness: 2,500–3,000 Hv Friction Coefficient: 0.15–0.20 Film Thickness: 1.0–3.0 μm Compatible Size: φ950×850 L mm *For more details, please refer to the catalog or feel free to contact us.

• Surface treatment contract service

We will be exhibiting at the JASIS exhibition held at Makuhari Messe International Exhibition Hall this year as well. [Exhibited Products] ■ High-resolution ICP optical emission spectrometer ■ Continuous light source atomic absorption spectrometer ■ TOC analyzer ■ Microwave sample digestion system [Exhibitor Seminars (New Technology Presentations)] ■ September 3 (Wed) 12:00–12:30 [Atomic Absorption] Venue: Makuhari Messe Conference Hall, Room 101 Surpassing the limits of atomic absorption analysis! A xenon continuous light source atomic absorption spectrometer that achieves efficient measurements like ICP-OES with easy operation. ■ September 4 (Thu) 15:00–15:30 [ICP-OES] Venue: TKP (formerly APA) Venue, Room No. 7 How far can we go? High-sensitivity analysis using a high-resolution ICP optical emission spectrometer equipped with an Echelle double monochromator and CCD detector. ■ September 5 (Fri) 15:00–15:30 [Trace Nitrogen, Sulfur, Chlorine] Venue: TKP (formerly APA) Venue, Room No. 1 Fully compliant with petrochemical JIS standards! A multifunctional nitrogen, sulfur, and chlorine analyzer that condenses solutions for routine analysis and research and development challenges into one device.

[Speaker] Nobuki Kawaguchi, Executive Chief Scientist, Astamuse Inc., Technology Intelligence Division [Key Lecture Content] "Japan Restart: Winning Strategies and Strategic Necessity for Japanese Companies" is a strategic document that connects the next 30 years of Japan to corporate management and investment decisions, based on the 17 key strategic areas outlined by the Takai administration. The central concepts are "strategic autonomy, strategic necessity, and chokepoints." It features data-driven analysis layered with primary information from over 1 billion innovation data points across 193 countries. [Lecture Items] <Part 1> Introduction: Overall Design and Three Key Concepts <Part 2> Highlights of Each Chapter = A Continuous "Industry Map" (approximately 60 minutes) <Part 3> Chokepoint Candidates and Latest Examples (approximately 40 minutes) Q&A / Business Card Exchange

[Speaker] ENEOS Power Co., Ltd. VPP Business Division VPP Business Planning Group Manager Yoshio Kyoraishi [Key Lecture Content] As one of the means of monetization in the VPP and grid storage battery business, considering entry into the demand-supply adjustment market has become unavoidable. On the other hand, due to rapid changes in the system since the start of trading for all products (April 2024), the difficulty of considering market entry has increased. In this situation, it is important to accurately capture the changes in market systems and predict the future market environment to proceed with considerations. In this lecture, we will organize the means of monetization, market environment, and market systems in the VPP and grid storage battery business, and discuss future prospects. [Lecture Items] 1. Means of Monetization 2. Market Environment 3. Market System 4. Future Prospects 5. ENEOS Power's Business Development 6. Summary 7. Q&A / Business Card Exchange

Takeuchi Kogyo Co., Ltd. will exhibit at the "39th EMC and Noise Control Technology Exhibition," which is part of TECHNO-FRONTIER 2026, held at Tokyo Big Sight from Wednesday, July 15 to Friday, July 17, 2026. Venue: Tokyo Big Sight, West Hall 3 Booth Number: 3-H14

The speed of application development is changing significantly. While the use of cloud, agile methodologies, in-house development, and generative AI is advancing, it has become increasingly difficult to sufficiently mitigate development risks through post-process checks by the security department alone. Additionally, there are expectations for the evolution of security measures through the use of generative AI, and the realization of advanced DevSecOps using AI is anticipated to become important in the future. This seminar will explain the challenges commonly faced when practicing DevSecOps, such as clarifying the lacking security measures, prioritizing those measures, and enhancing DevSecOps through the use of AI. This content is a must-see for those in information systems, security, development, and operations who are struggling with promoting DevSecOps.