Compact and Long-lasting Germicidal Lamp

Space-saving sterilization light source UV-CCL

This is a UV-CCL (Cold Cathode Sterilization Lamp). It is a space-saving sterilization light source that achieves compactness and energy concentration through bending processing. - The straight tube length of 680mm has been compacted to just 78mm in diameter! - It is resistant to flickering, and there is almost no reduction in lifespan due to the ON/OFF of the power supply! - It has a long lifespan of 15,000 hours! In UV sterilization devices equipped with this light source, after 30 minutes of operation, 90.7% of airborne bacteria are inactivated, after 60 minutes, 99.54% are inactivated, and after 90 minutes, 99.99% are inactivated. Test chamber: 25㎥ (equivalent to about 6.6 tatami mats) Test bacterial species: Staphylococcus epidermidis Test environment: 27℃, 40% RH

• Lamps and light emitting devices
• Mercury lamp
• Fluorescent lamp

Long-life UVC lamp UV-CCL

Features of UV-CCL 1. Strong against ON/OFF power cycling and long lifespan Due to the absence of emitter coating, there is almost no degradation of lifespan from repeated ON/OFF cycling. 2. Various shapes and sizes Conventional sterilization light sources have challenges such as inflexibility in shape and size. UV-CCL uses specialized glass from Nippon Electric Glass (NEG) and can be bent at low temperatures of 700 degrees. This allows for compact designs and the selection of light sources suitable for specific applications and locations. 3. Energy concentration Bending processing concentrates energy and efficiently emits ultraviolet light. Compared to CCL in straight tube form, it achieves an increase in ultraviolet intensity.

• Other food machinery
• Ultraviolet sterilization device
• Other insect and mold prevention measures

Flicker-resistant and long-lasting sterilization lamp.

Conventional general-purpose sterilization lamps have issues such as "short lifespan in the first place" and "lifespan affected by the number of power ON/OFF cycles." This is an underwater sterilization lamp that addresses those problems. Wavelength: 254nm Lifespan: 15,000h For more details, please contact us.

• Other water treatment related equipment
• Sterilizing water production equipment
• UV/Ozone Sterilization Systems and Equipment

Eliminating issues such as "the inherently short lifespan of conventional sterilization lamps" and "the lifespan being affected by the number of power ON/OFF cycles."

Long-life underwater sterilization lamp with a cold cathode. Cold cathode lamps are resistant to flickering, and there is almost no reduction in lifespan due to power ON/OFF. For preventing algae, fish diseases, and improving water quality. Wavelength: 254nm Lifespan: 15,000h Please contact us for more details.

• Water treatment equipment
• Water treatment equipment and technology
• Water quality improvement

A sterilizing lamp that solves the problems of conventional sterilizing lamps.

Conventional general-purpose sterilization lamps have issues such as "short lifespan in the first place" and "lifespan being affected by the number of power ON/OFF cycles." This is a sterilization lamp that resolves those problems. For more details, please contact us.

• Sterilizing water production equipment
• Small food sterilizer
• UV/Ozone Sterilization Systems and Equipment

A long-lasting sterilization lamp that resolves the issues of conventional sterilization lamps.

Conventional general-purpose sterilization lamps have issues such as "short lifespan from the outset" and "lifespan affected by the number of power ON/OFF cycles." This is a sterilization lamp that addresses those problems. For more details, please contact us.

• Lamps and light emitting devices
• Mercury lamp
• Fluorescent lamp

Disinfection without leaving residues using deep ultraviolet light.

The UV sterilization device FreshAir disinfects the air around the unit and the air sucked in by the fan through ultraviolet (UV-C) irradiation. The UV-C irradiation acts on the DNA of bacteria and viruses, rendering them inactive by losing their ability to reproduce. Sterilization using ultraviolet light does not produce resistant bacteria and is a clean method that does not generate harmful byproducts. Features of FreshAir: 1. 360° UV irradiation + fan for disinfection Not only does it provide 360° UV irradiation, but the fan also directly exposes the sucked-in air to the UV lamp for disinfection. 2. Ceiling-mounted design, so it doesn't get in the way It can be safely installed in spaces where there is no room for floor installation, in environments where children are running around, or where individuals with physical disabilities are present. 3. Can be used in occupied environments, with confirmed safety for living spaces Uses ozone-free lamps that generate little ozone. The ultraviolet light is also irradiated horizontally by a horizontal plate. A safety evaluation test based on JIS C 7550 was conducted by a third-party organization accredited with ISO 17025, confirming safety for living spaces, allowing for 24-hour use in occupied areas. *For more details, please contact us.

• Ultraviolet irradiation equipment

It is resistant to flickering, and there is almost no reduction in lifespan due to the power ON/OFF. It is bulb-shaped and easy to replace.

A sterilizing bulb using a cold cathode sterilization lamp. Since it is a bulb, replacing the light source is easy. Cold cathode lamps are resistant to flickering, and there is almost no reduction in lifespan due to turning the power on and off. ■ Test for the inactivation effect of the novel coronavirus In an in vitro test (test tube experiment) conducted as commissioned research by Professor Daisuke Hayasaka and Associate Professor Chuu Shimoda from the Joint Faculty of Veterinary Medicine at Yamaguchi University, it was confirmed that irradiating the Delta variant of the novel coronavirus on a petri dish for 5 seconds from a distance of 5 cm inactivated it by >99.99%. Additionally, under other conditions, it was confirmed that irradiating from a distance of 10 cm for 10 seconds resulted in >99.94% inactivation, and from a distance of 20 cm for 10 seconds resulted in >99.44% inactivation of the same virus. (*The results of this test do not indicate effectiveness in actual usage environments.) *For more details, please refer to the PDF document or feel free to contact us.

• Other physicochemical equipment

A sterilization lamp that resolves the issues of conventional sterilization lamps.

Conventional general-purpose sterilization lamps have issues such as "a fundamentally short lifespan" and "the lifespan being affected by the number of power ON/OFF cycles." This is a sterilization lamp that resolves those problems.

• Mercury lamp
• Ultraviolet sterilizer
• Water quality improvement

Long-lasting sterilization lamp UV-CCL with strong power ON/OFF capability.

Features of UV-CCL 1. Strong against power ON/OFF and long lifespan Due to the absence of emitter coating, there is almost no degradation in lifespan from repeated ON/OFF cycles. 2. Various shapes and sizes Conventional sterilization light sources have challenges such as inflexibility in shape and size. UV-CCL uses specialized glass from Nippon Electric Glass (NEG) and can be bent at low temperatures of 700 degrees. This allows for compact designs, enabling the selection of light sources suitable for various applications and locations. 3. Energy concentration Bending processing concentrates energy and efficiently irradiates ultraviolet light. Compared to CCL in straight tube form, it achieves an increase in ultraviolet intensity.

• Sterilizer
• Ultraviolet sterilizer
• Sterilization and disinfection equipment

Eliminating the issues of traditional sterilization lamps: [deterioration of lifespan due to power ON/OFF] and [inherently short lifespan].

It is a long-life ultraviolet lamp (UV-CCFL) with features such as: - Less heat generation compared to HCFL - Strong resistance to flickering, with almost no reduction in lifespan due to power ON/OFF - Energy concentration not only in straight tubes but also in lamps with special shapes. For more details, please contact us.

• Other water treatment related equipment
• Air purifiers
• Ultraviolet sterilization device

High attractant effect green lamp! Hanging agricultural insect trap for capturing flying pests.

This insect trap is a product developed in collaboration with the Taoyuan Agricultural Improvement Station, a government agency under Taiwan's Ministry of Agriculture, and a lighting manufacturer. The light source uses a green lamp that emits wavelengths favored by insects, specifically 350 to 550 nm (UV-A to green light). Insects respond to light wavelengths between 300 and 600 nm. Traditional lamps primarily peak around 365 nm, but the green lamp has peaks at both 365 nm and 550 nm, resulting in a high attraction effect! This effectively draws in many flying pests and helps reduce damage to crops! The light source has a long lifespan of 10,000 hours and is designed for easy replacement as it uses a bulb format! Attracted insects are sucked in by a fan and collected in a large-capacity net attached to the main unit. By regularly disposing of the accumulated insects, the net can be reused multiple times. If you are troubled by flying pests, please consider this product! *For more details, please download the PDF or contact us directly.

• Insect killer
• Insect Control System
• Other insect and mold prevention measures

Adopts long-life light source! Hanging agricultural insect trap.

This product uses a long-lasting cold cathode lamp with a light source lifespan of 10,000 hours. Cold cathode lamps are resistant to power ON/OFF cycles, so continuous lighting does not affect their lifespan. Additionally, it emits wavelengths that attract insects, specifically in the range of 350 to 550 nm (UV-A to green light), and a photocatalyst is applied to enhance the attraction effect. The attracted insects are sucked in by a fan and accumulate in a net attached to the main unit. By regularly disposing of the accumulated insects, the net can be reused, resulting in low running costs and economic efficiency. Please consider this for your flying insect control needs. *For more details, please download the PDF or contact us directly.*

• Insect killer
• Insect Control System
• Insect control lighting system

Pest control measures for fish processing plants and more! Hanging agricultural insect trap!

This insect trap is a product developed in collaboration between the Taoyuan Agricultural Improvement Station, a government agency under Taiwan's Ministry of Agriculture, and a light source manufacturer. It emits wavelengths favored by insects, ranging from 350 to 550 nm (UV-A to green light), and is coated with a photocatalyst to enhance its effectiveness. The lifespan of the light source is 10,000 hours! Since it uses a bulb, replacement is very easy. The attracted insects are sucked in by a fan and accumulate in a net attached to the main body. By regularly disposing of the accumulated insects, the net can be reused, resulting in low running costs and economic efficiency. It can be used not only in orchards but also in aquaculture and meat processing facilities. Please consider it. *For more details, please download the PDF or contact us directly.*

• Insect killer
• Insect Control System
• Other insect and mold prevention measures

Clean sterilization methods without chemicals for fish disease prevention and water quality improvement.

This is a cold cathode underwater sterilization lamp (16W). Uses: Measures against algae such as blue-green algae, sterilization and purification of water, etc. It uses highly transparent quartz glass. The UV transmission rate is high, effectively demonstrating its sterilization power. Please use it in filtration tanks and inside equipment. Conventional sterilization lamps have a short lifespan and face issues such as further shortening of lifespan with each flicker (power ON/OFF), requiring frequent replacements. The cold cathode sterilization lamp has a long lifespan of 15,000 hours and can withstand over 100,000 flickers, reducing the frequency of replacements.

• Water treatment filters and consumables
• Other water treatment related equipment
• Water quality improvement

UV-CCL that resolves the issues of conventional sterilization lamps.

This is a cold cathode underwater sterilization lamp (12W). Uses: Measures against algae such as blue-green algae, water sterilization, purification, etc. It uses high-transparency quartz glass. The UV transmission rate is high, effectively demonstrating its sterilization power. Please use it in filtration tanks and inside equipment. Conventional sterilization lamps have a short lifespan and face issues such as further shortening of lifespan with each flicker (power ON/OFF), requiring frequent replacements. The cold cathode sterilization lamp has a long lifespan of 15,000 hours and can withstand over 100,000 flickers, reducing the frequency of replacements.

• Water treatment filters and consumables
• Other water treatment related equipment
• Water quality improvement

Submerge in water to improve water quality! A clean disinfection method without the use of chemicals.

This is a cold cathode underwater sterilization lamp (10W). Uses: Measures against algae such as blue-green algae, sterilization and purification of water, etc. It uses high-transparency quartz glass. The UV transmission rate is high, effectively demonstrating its sterilizing power. Please use it in filtration tanks or inside equipment. Conventional sterilization lamps have a short lifespan and face issues such as further shortening of lifespan with each flicker (turning the power ON/OFF), requiring frequent replacements. The cold cathode sterilization lamp has a long lifespan of 15,000 hours and can withstand over 100,000 flickers, reducing the frequency of replacements.

• Lamps and light emitting devices
• Mercury lamp
• Water quality improvement

Comparison of temperatures between cold cathode sterilization lamps and conventional sterilization lamps.

We compared the temperatures of cold cathode sterilization lamps and conventional hot cathode sterilization lamps. Measurements were taken at the electrode area and the center of the light source. The cold cathode sterilization lamp tended to have a lower temperature. We believe that the lower temperature can reduce the thermal impact on surrounding components.

• Ultraviolet irradiation equipment
• Fluorescent lamp
• Other sterilization, disinfection and disinfection equipment

Capture even the tiniest airborne pests! Hanging agricultural insect trap.

This insect trap is a product developed in collaboration with the Taoyuan Agricultural Improvement Station, a government agency under Taiwan's Ministry of Agriculture, and a light source manufacturer. It emits wavelengths favored by insects, specifically 350 to 550 nm (UV-A to green light), and uses a photocatalyst to further enhance its effectiveness. The lifespan of the light source is 10,000 hours! Since it uses a bulb design, replacement is very easy. The attracted insects are sucked in by a fan and accumulate in a net attached to the main body. It can capture flying pests larger than 0.15 mm. Additionally, by regularly disposing of the accumulated insects, the net can be reused, making it low-cost and economical. We encourage you to consider this solution for flying insect control. *For more details, please download the PDF or contact us directly.

• Insect killer
• Insect Control System
• Other insect and mold prevention measures

Resolving issues such as 'inherently short lifespan' and 'lifespan affected by the number of power ON/OFF cycles.'

Conventional general-purpose sterilization lamps have issues such as "short lifespan" and "lifespan affected by the number of power ON/OFF cycles." This is a sterilization lamp that addresses those problems. In the UV sterilization device equipped with UV-CCL, after 30 minutes of operation, 90.7% of airborne bacteria are inactivated, after 60 minutes, 99.54% are inactivated, and after 90 minutes, 99.99% are inactivated. Test chamber: 25㎥ (equivalent to about 6.6 tatami mats) Test bacterial species: Staphylococcus epidermidis Test environment: 27℃, 40% RH

• Lamps and light emitting devices
• Sterilization and disinfection equipment
• UV/Ozone Sterilization Systems and Equipment

Pest control without the use of chemicals! Suction-type insect trap.

【Recommended for the following people】 ■ Those troubled by pests ■ Those who want to reduce running costs ■ Those who want to decrease the amount of pesticide used This insect trap is a product developed in collaboration with the Taoyuan Agricultural Improvement Station, a government agency under Taiwan's Ministry of Agriculture, and a light source manufacturer. It emits wavelengths that insects prefer, ranging from 350 to 550nm (UV-A to green light), and uses a photocatalyst to further enhance its effectiveness. The expected lifespan of the light source is an impressive 10,000 hours! Since it uses a bulb, replacement is very easy. The attracted insects are sucked in by a fan and accumulate in a net attached to the main unit. By regularly processing the accumulated insects, the net can be reused, resulting in low running costs and economic benefits. Additionally, using this insect trap can help reduce the amount of pesticide spraying needed for pest control. Please consider it. *For more details, please download the PDF or contact us directly.

• Ultraviolet irradiation equipment
• Insect Control System
• Insect control lighting system

Insect trap with suction that enhances attraction effects using a special light source.

Insect pest control using insect traps is a clean method that reduces the amount of pesticide application. This insect trap is a product developed in collaboration with the Taoyuan Agricultural Improvement Station, a government agency under Taiwan's Ministry of Agriculture, and a light source manufacturer. It uses a light source that emits wavelengths favored by insects, ranging from 350 to 550 nm (UV-A to green light) along with a photocatalyst. While ultraviolet and green light alone have an attracting effect, the reaction of the photocatalyst generates carbon dioxide, further enhancing the attraction. It employs a cold cathode lamp that is strong against power ON/OFF cycles. The light source has a lifespan of 20,000 hours, which translates to approximately 2 years and 3 months if used 24 hours a day. Since the amount of ultraviolet light gradually decreases, it is recommended to replace the light source approximately every two years. As it is a bulb, replacing the light source is very easy. The attracted insects are sucked in by a fan and accumulate in a net attached to the main unit. By regularly disposing of the insects collected in the net, the net can be reused repeatedly. ■ Achievements ■ Used in fish processing plants, mushroom factories, orchards, and the Osaka Expo (mosquito control), among others.

• Insect killer
• Insect control lighting system
• Other insect and mold prevention measures

Just submerge it in the filtration tank for water quality improvement.

This is a cold cathode underwater sterilization lamp (14W). Uses: Measures against algae such as blue-green algae, water sterilization, purification, etc. It uses high-transparency quartz glass. The UV transmission rate is high, effectively demonstrating its sterilizing power. Please use it in filtration tanks and inside equipment. Conventional sterilization lamps have a short lifespan and face issues such as further shortening of lifespan with each flicker (power ON/OFF), requiring frequent replacements. The cold cathode sterilization lamp has a long lifespan of 15,000 hours and can withstand over 100,000 flickers, reducing the frequency of replacements.

• Water quality improvement
• Ultraviolet sterilization device
• Other water treatment

UVA + green light increases attraction effect! A clean method to reduce pesticide application!

Insect pest control using insect traps is a clean method that reduces the amount of pesticide application. This insect trap is an agricultural insect trap developed in collaboration with the Taoyuan Agricultural Improvement Station, a government agency under Taiwan's Ministry of Agriculture, and a light source manufacturer. It uses a light source that emits wavelengths favored by insects (350~550nm, UV-A to green light) along with a photocatalyst. While ultraviolet and green light alone have an attracting effect, the reaction of the photocatalyst generates carbon dioxide, further enhancing the attracting effect. 【Features】 ■ Uses a cold cathode lamp that is strong against power ON/OFF ■ Expected lifespan of the light source is 20,000 hours! ■ As it is a bulb, replacing the light source is very easy ■ The net can be reused multiple times *For more details, please download the PDF or contact us directly.

• Insect killer
• Insect Control System
• Insect control lighting system

These are nitrile rubber gloves that have been re-cleaned domestically in Japan and are safely and securely packaged in double clean packs.

With the precision of integrated circuits and other technologies, it has become increasingly important to ensure a high level of cleanliness for gloves used in clean rooms. We have focused on this aspect and have been conducting research and development. In collaboration with domestic specialized cleaning factories, we are selling nitrile rubber gloves "Excel Ten," which comply with Class 10 standards. The nitrile rubber gloves "Excel Ten" are washed, dried, inspected, and packaged in a clean room at a specialized glove cleaning factory in Japan, ensuring safe usage. They are ultra-thin, flexible, yet durable, with anti-slip and embossed processing on the fingertips, providing excellent workability, as well as outstanding abrasion resistance, oil resistance, and chemical resistance. *For more details, please download the PDF or contact us.

• Other clean room equipment and facilities
• Clean Room
• Gloves

Eliminate issues such as "the original lifespan of conventional sterilization lamps is short" and "the lifespan is affected by the number of power ON/OFF cycles."

Conventional sterilization lamps had issues such as "inherently short lifespan" and "lifespan affected by the number of power ON/OFF cycles." This is a long-lasting sterilization lamp that addresses those problems. In the UV sterilization device equipped with UV-CCL, after 30 minutes of operation, 90.7% of airborne bacteria were inactivated, after 60 minutes, 99.54% were inactivated, and after 90 minutes, 99.99% were inactivated. Test chamber: 25 m³ (equivalent to approximately 6.6 tatami mats) Test bacterial strain: Staphylococcus epidermidis Test environment: 27°C, 40% RH

• Lamps and light emitting devices
• Ultraviolet irradiation equipment
• Ultraviolet sterilization device

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

Are you struggling to explain "safety" to the client using just drawings? - The risks in blind spots are difficult to convey to the client through drawings alone. - Safety measures often become a target for cost reduction, making it hard to communicate their necessity. - There is a concern that the client might say, "It's more dangerous than I thought," after completion. Risks that are visible to design professionals are not easily understood intuitively by clients who are outside the field. This document is not just a simple explanation of sensor functions; it is a guide to visually explain "why sensors are necessary in that location." It can be used directly as explanatory material for the client. Here are three key points for utilizing this document: 1. Visualization of Risks Blind spots during vehicle departure and contact risks within the site are illustrated clearly. 2. Clarification of Selection Criteria A comparison table outlines the differences between complex sensor types such as infrared, ultrasonic, and loop coils. 3. Diagram of System Configuration It illustrates not just the sensors alone, but how they combine with components like rotating lights and control panels, providing practical assistance for electrical equipment design. Please make use of this to prevent "rework after completion" and "accident risks."

In facilities operating nurse call systems, we have made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with a single receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.