International Powder Technology Exhibition Tokyo 2022 (Powtex 2022) will be exhibiting again this year!

Low wear and high durability crusher. Multi-purpose, high performance, and low price with over 10,000 units sold.

The "Makino Type Crusher DD Series" features a directly connected rotating plate that reduces transmission loss, while also achieving cost reduction through simplified structure. The attached blades on the rotating plate are hardened, making them resistant to wear and providing excellent durability. Additionally, the shape of the blades has been modified from previous models to achieve further fine grinding. It is compatible with various raw materials such as ores, resins, gypsum, glass, and grains. 【Features】*For details, please refer to the catalog. ■ Achieved approximately 30% cost reduction (compared to our company) through structural simplification ■ No maintenance required for belt adjustments due to direct motor connection ■ Special cast steel used for blades extends the lifespan of consumables ■ Capacity increase is possible with only motor replacement ■ Consideration of blade arrangement reduces noise and airflow generation ■ Changing the rotation speed is easy with an inverter ◎ For more information, please refer to the PDF materials or feel free to contact us.

• Crusher
• Crusher/Mill

If it can be cut with scissors, it can be crushed.

We will cut thin materials such as sheets, wrapping films, paper, cloth, rubber, and thread-like raw materials using scissors. Anything that can be cut with scissors can be crushed. 【Features】 ○ Screen replacement is easy ○ Crushed materials can be handled in sheet or roll form ○ Wide sheets can be easily processed using a pickup machine ○ Cutting as fine as 0.005mm is possible For more details, please contact us or download the catalog.

• Plastic processing machines (cutting and rolling)

Fully cleanable mixing machine, ribbon mixer, sanitary specifications.

A mixing machine with a body casing that has a fully welded structure and can be completely cleaned. ■Features■ ■ The case is designed with a fully welded structure and a clever connection of the shaft to achieve complete cleaning. ■ The ribbon part is also designed with cleaning in mind. ■ The seals in the bearing section are made of a two-part resin for easy removal. ■ Volume: 50 to 1,500 liters (actual capacity). ■ Discharge methods: slide gate, swing gate, choke valve. ■ Materials: contact parts made of SUS304/316/316L; seal resin made of nylon and others. ■ For other functions and details, please download the catalog or contact us.

• Mixer/agitator

High-speed mixing of chemical products, resins, food, etc. A wide range of products in various sizes. Mixing tests are currently being accepted.

The "AVALONG High-Speed Mixer" mixes by stirring with rapidly rotating blades, enabling high-precision mixing in a short time due to its powerful convection and diffusion effects. It can achieve over 2000 rotations per minute, preventing uneven mixing. From a compact model with a total capacity of 15L to a large model of 1500L, you can choose from a wide range of products to meet your needs. It can be utilized for various purposes such as mixing, dispersing, drying, granulating, and surface modification. 【Features】 ■ Liquid addition during mixing is possible ■ Heating and cooling control through a jacket structure ■ Minimal internal residue, making cleaning easy when the lid is opened ■ Standard two-stage blades are incorporated, and four-stage blade specifications are also available *You can view product materials from the "PDF Download." ★ Mixing tests for your desired raw materials are possible. (Please prepare the raw materials.) For more details, feel free to contact us.

• Mixer/agitator

This is the comprehensive catalog for the plastic pellet foreign matter separation and removal machine, Pelatron Diduster.

We have followed the flow of nature. The pursuit of high-purity raw materials has led to the development of separation and classification technologies. Air cleaning of grains, corn, rice, and other foods has been practiced for thousands of years. Over the centuries, the need for efficiency in cleaning and separation/classification has led to the development of new technologies. The air cleaning, separation, and classification technologies in our latest machines are based on the same concept. For more details, please contact us or download the catalog.

• Food Conveyor Equipment
• Other process controls

Prevents damage to raw materials and streamer formation in pellets. It also leaves no residue due to its self-cleaning action.

"Pellbow" is an elbow pipe that reduces friction of bulk materials during air transport due to its unique structure. The materials accumulated in the pocket-like "impact zone" cover the collision area, preventing damage to the transported raw materials and the generation of streamers during resin pellet transport, thereby suppressing the occurrence of fine powders and damage to the piping. Its compact design minimizes piping space, making it more space-efficient than standard elbow pipes, and it can be customized flexibly. 【Features】 ■ Self-cleaning action leaves no residue ■ Compatible with various standard flanges and pipes ■ Contributes to low noise levels ■ Low pressure loss *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Other processing machines
• Other process controls

A unique classifier that carries powder particles on an air flow and passes them through a screen.

To classify powder particles into the required sizes (a process called classification), there are two common methods: using a screen (sieve) and using air flow to classify based on differences in specific gravity (air classification machine). It is not feasible to achieve 100% or a mixing ratio of 0% with an air classification machine, and a vibrating sieve cannot handle large volumes due to issues like clogging. The "Micro Shifter" is a unique classification machine that allows powder particles to pass through a screen while being carried by an air flow. The newly developed fan-less type (NF type) incorporates a specific gravity sorting mechanism, achieving higher precision classification. The "Air Jet Sieve Particle Size Analyzer" uses dedicated JIS standard sieves and can measure down to a minimum of 20μ. 【Features】 ■ High precision classification and sorting ■ Can handle easily agglomerated fine powders ■ Can process adhesive powders ■ High reliability due to screen type ■ Screen replacement is easy with a one-touch mechanism ■ Easy internal cleaning ■ Minimal vibration ■ Can be used for removing foreign materials such as hair and debris from powders, as well as removing powder from particles ● For more details, please contact us or download the catalog.

• Other powder equipment

Crush powerfully with a small motor! Ideal for coarse crushing in a wide range of applications from ores to food and chemicals.

The "Hammer Crusher" is a coarse crusher that powerfully crushes large raw materials. The hammer pins attached to the rotor stand upright due to the centrifugal force of high-speed rotation, and the tips of the hammers deliver a significant impact force at maximum peripheral speed, crushing lump, sheet, and granular raw materials to about a few millimeters. When the hammer strikes hard or difficult-to-crack materials, it swings and repeatedly delivers impacts, allowing for a large crushing capacity with a small motor compared to crushing all at once with fixed hammers. The product particle size is determined by the rotation speed of the hammers and the hole diameter of the attached screen.

• Other processing machines
• Crusher
• Crusher

Creating a new "form" of powder and particle transport. Transporting without breaking - Pivot Conveyor.

The pivot conveyor KLS type and KLL type are pivot conveyors that safely, reliably, and quickly transport all types of powders and granules in horizontal, vertical, and directional movements. Once the material is supplied into the bucket, it is conveyed to the exit without losing its original shape, ensuring safe transport of granular materials. The flanges of the buckets overlap between each bucket, preventing spills during supply. Additionally, a skirt is equipped at the supply opening to prevent lateral bouncing. For more details, please contact us or refer to the catalog.

• Powder Conveyor Device

About ROAD: The "Roundtable on the Purpose of Autonomous Driving (ROAD)" conference series has evolved into a unique platform for interdis-ciplinary dialogue and international collaboration in the field of autonomous driving and autonomous mobility. Established in 2016, ROAD has brought together researchers, industry leaders, and public sector stakeholders from six countries across three continents. Based on this background, the upcoming ROAD 2026 will focus on "safety” and "driving AI”—the final pieces of the autonomous driving puzzle—to advance discussions on establishing the foundational framework for ensuring safety quality and obtaining regular-tory approval for autonomous driving. We also intend to discuss the international commonalities and differences regarding the social value brought about by ADS vehicles in terms of automation, intelligent driving, and mobility. We have established a total of five compelling themes for the Round Workshops, consisting of two topics related to “The Last Piece” and three topics related to the social value of ADS, as shown below. 1) Round Workshop 1 - Horizons of E2E Driving AI → Can AI Understand the Driving Environment Like Humans? 2) Round Workshop 2 - Beyond the Unknown: Safety Cases for ADS → Can Safety Ever Be Proven? 3) Round Workshop 3 - Envisioning Smart City Mobility → Can Smart City Mobility Bridge the Mobility Divide? 4) Round Workshop 4 - Logistics Enhancement Through Autonomous Tracking → Will Logistics Become Human-Free? 5) Round Workshop 5 - The Evolution of CASE: SDV/AIDV → Will Automakers Become AI Companies? We hope you’ll all join us!

[Speaker] Masashi Sugita, President and CEO of LEX Style Co., Ltd. [Key Lecture Content] The power consumption of AI servers used in data centers has significantly increased, making traditional air cooling insufficient for operation. This lecture will organize the requirements for introducing a liquid cooling system into air-cooled data centers and explain the implementation method using free cooling with specific design details. When handling high-density AI servers, energy efficiency is required, and the widely used energy efficiency indicator, as well as the Ministry of Economy, Trade and Industry's Resource and Energy Agency's PUE regulation of "1.3 or below," will be explained along with practical operational insights. [Lecture Items] 1. Heat dissipation methods for high-density, high-heat AI servers 2. Basics and importance of PUE/pPUE 3. PUE regulation of "1.3 or below" by the Ministry of Economy, Trade and Industry's Resource and Energy Agency 4. AI server implementation and requirements for new data centers 5. Summary and future outlook 6. Q&A / Business card exchange

[Key Lecture Content] 1. Promotion of SAF Introduction Yasushi Yamashita, Director, Carbon Neutral Promotion Office, Aviation Bureau, Ministry of Land, Infrastructure, Transport and Tourism 1. Importance of SAF in the decarbonization of the aviation sector 2. Initiatives to promote the introduction of SAF 3. Q&A / Business card exchange 2. Japan Airlines' Challenge Towards Net Zero CO2 Emissions by 2050 Kazuki Hirotani, Group Leader, GX Planning Group, Sustainability Promotion Department, Japan Airlines Co., Ltd. 1. Introduction of our five initiatives for CO2 emission reduction 2. Initiatives for reducing fuel consumption (introduction of fuel-efficient aircraft, operational improvements) 3. Initiatives for fuel transition (sustainable aviation fuel SAF) 4. Initiatives for reductions outside the value chain (carbon credits, new removal technologies) 5. Initiatives to deepen collaboration with society 6. Q&A / Business card exchange

[Instructor] Yuichiro Kabushiki, Partner Lawyer at TMI Comprehensive Law Office [Key Lecture Content] With the spread of AI, there is growing attention on the civil liability of developers, providers, and users of AI. The Ministry of Economy, Trade and Industry will publish "Guidelines on the Interpretation and Application of Civil Liability in AI Utilization" in April 2026, and the Ministry of Justice will also establish an expert meeting to examine civil liability related to unauthorized use of images and voices generated by AI in the same month. As the full enforcement of the AI Promotion Act and the revision of AI guidelines are underway, it is necessary to design and operate governance based on the potential responsibilities that may arise retrospectively. In this seminar, based on the guidelines from the Ministry of Economy, Trade and Industry and drawing on litigation practice experience as a judge and lawyer, we will organize the basic framework for assessing civil liability and explain fundamental methods for designing and operating governance based on risk analysis. Furthermore, we will examine the framework for civil liability and the design and operation of governance using hypothetical cases that are likely to pose practical issues.

In this seminar, we will welcome Mr. Satoru Hayami from Waseda University, who will explain the latest trends in AI utilization in manufacturing, as well as the evolution of technologies such as agent-based AI and physical AI, and the opportunities and key points for practical application in the manufacturing industry. Furthermore, Mr. Tsubasa Shibata, representative of Next Opt, will introduce processes aimed at practical implementation, incorporating actual case studies from manufacturing sites. We hope you will envision the "potential for AI utilization in your company" and take home hints that will lead to improvements in your operations starting tomorrow. We look forward to your participation.