Notice of Participation in the "2022 Japan Die Casting Exhibition"

Significantly reduce work time by one-third without removing the tang. Trial kits are also available in the lineup.

The "Tangless Insert" is a female thread reinforcement that can be inserted without a tang using a special tool. Since the insert has no directional orientation, it can be inserted from either side. There is no need to break off or search for the tang after insertion, which reduces the work time to about one-third compared to conventional products, thereby improving work efficiency. 【Features】 ■ No skilled expertise required. Anyone can easily perform the task. ■ Minimal damage to the female thread during extraction. ■ Both manual and automatic extraction of the insert are possible. ■ A kit that includes manual insertion tools, drills, and taps is also available (3 products: M4/M5/M6). *For more details, please refer to the documentation. Feel free to contact us with any inquiries.

• Spring

[Free Sample Available] A heating material made by turning a new carbon nanotube (CNT) material into paint and applying a thin film coating.

Unlike planar heating elements made from metallic materials such as nichrome wire, this is a material that heats uniformly across its entire surface. HEATNEX uses CNT as a resistive element and prints it onto a film, achieving a flexible heating material. By adjusting the transparency, it can be made close to transparent and can also accommodate specifications that allow light to pass through. 【Features】 ■ A flexible heating material that can heat uniformly across its entire surface. ■ Heats efficiently through heat conduction and far-infrared radiation. ■ Excellent thermal conductivity and thermal radiation, allowing for instant heating and cooling. ■ It is possible to create a lightweight planar heating element by forming electrodes with conductive paste, etc. ■ Capable of emitting about five times more far-infrared radiation than metallic heating elements. *Evaluation results are based on internal comparisons. 【Newly Developed Products】 High-Temperature Compatible Products - Heat Resistance: 200℃ (Standard Product: 80℃) Using polyimide as the substrate, it can heat at higher temperatures compared to standard products. Low-Voltage Compatible Products - Heat Resistance: 80℃ - Surface Resistivity: 30Ω/□ (Standard Product: 150Ω/□) It can be used at low voltage, making it widely applicable. *For more details, please download the materials or contact us.

• Other polymer materials

Certified by the Japan Architecture Center! Just attach it to the installed nut to effectively prevent loosening and falling off of bolts and nuts!

It is significantly more effective than double nut loosening prevention measures and can reduce maintenance inspection processes. It also contributes to approximately 40% weight reduction. It can be easily installed using commercially available socket wrenches. It has passed tests using an impact-type vibration testing machine compliant with NAS3350 standards. The sizes range from M4 to M24. 【Product Features】 ○ Products conforming to the Japan Building Center evaluation (BCJ evaluation - LS0107-01, applicable to M12). ○ The loosening prevention performance of LockOne has been proven in tests using an impact-type vibration testing machine compliant with NAS3350 standards. ○ Lineup from M4 to M24. ○ Can be installed with commercially available 12-point socket wrenches. ◎ For more details, please download the catalog or contact us.

• Spring
• nut
• bolt

Easy installation with one hand. Prevents nut detachment with spring force. Reduces the risk of ceiling falls. Also passes tests compliant with NAS3350 standards.

"Instant Lock" is a loose and drop prevention fitting that is suitable for long bolts such as hanging bolts and can be easily attached with just a light force. (Developed by the company Kirii Seisakusho) No tools or special skills are required, and it demonstrates stable performance due to the restoring force of the spring. It has also passed tests using an impact-type vibration testing machine compliant with the NAS3350 standard. It reduces the risk of falling construction materials, including suspended ceilings, and contributes to the safety of workplaces, stores, and residences. Other sizes besides w3/8 are also available, so please feel free to consult us. M8, M10, and M12 have been added. 【Features】 ■ Can be attached and detached instantly with one hand ■ No torque management required ■ Provides a long-term anti-loosening effect *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• others

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will be exhibiting at the "Livestock Materials EXPO" held at Makuhari Messe! We plan to showcase examples of our "Fermentation Drying Equipment for Livestock Manure," provide information on our "Composting Equipment and Deodorants," and introduce our "Subsidy Projects." Please feel free to stop by our booth. We will give a small gift to those who fill out our survey or have implemented our composting system! We look forward to meeting everyone. = Exhibition Information = Dates: October 1 (Wednesday) to October 3 (Friday), 2025, for three days from 10:00 to 17:00 Venue: Makuhari Messe, Halls 5-7, 9, and 10 2-1 Nakase, Mihama-ku, Chiba City Booth Number: Hall 9, 35-6

**Seminar Points** Improvement means changing standards for the better. There can be no improvement where there are no standards. If there are no standards, start by creating them. Standards are "rules." What to decide are "procedures," "methods," and "timing." This seminar is focused on determining "procedures" and creating "work instruction documents." **"Without standards, there is no improvement" — Learning from Toyota's teachings on documentation in the workplace** The source of Toyota's strength lies in the concepts of "improvement" and "standardization." At the core of this is a culture of making insights and skills visible in the workplace and documenting them. In other words, it is a system of knowledge transfer through documentation. Relying on the experience and intuition of veterans can be a strength in the workplace, but it also carries the risk that quality may change when people change. By ensuring that everyone performs tasks in the same way, we can achieve the same quality products (good products) in the same amount of time. First and foremost, the development of "work instruction documents" is essential. When presenting work instruction documents in video format, it is also a prerequisite that this "foundational document" is well established. *For more details, please download the PDF or contact us.*

Nitto Kohki will exhibit at the "30th Mechanical Components Technology Exhibition [Tokyo]" held at Makuhari Messe Hall 5 from July 9 (Wednesday) to July 11 (Friday). [Booth Number: Hall 5 31-32] At this exhibition, we will showcase a variety of products, including the electric suction hand "e-VEE" with a built-in pump that does not require compressed air, a cordless belt sander, the electric driver "Delvo" that can be mounted on robots, and the "Flow Monitor" that allows for easy visualization of the flow of cooling water in molds and other applications.

[Speaker] Mizutani Masataka Senior Researcher Energy Comprehensive Engineering Research Institute, General Incorporated Foundation Carbon Neutral Technology Center, Power System Group [Key Lecture Content] As discussions progress towards the revision of the GHG Protocol Scope 2, elements such as "when and where the electricity was generated" are gaining attention in corporate renewable energy procurement and CO2 emissions calculations. Additionally, with the expansion of renewable energy adoption, the CO2 emission intensity of electricity has begun to fluctuate significantly depending on the time of day and region. In this lecture, we will organize topics such as hourly matching, deliverability, and standard supply services (SSS) that are being discussed in the Scope 2 revision, and introduce examples of hourly CO2 emission intensities provided both domestically and internationally. Furthermore, through analysis examples using publicly available data, such as office buildings and EV charging, we will explain what can be revealed through hourly evaluations and consider the implications and responses for future renewable energy procurement, non-fossil certificates, and PPAs.