International Powder Technology Exhibition Tokyo 2022

Custom-made delivery performance No. 1 in Japan! "Capacitive Level Switch ALN/ST Type"

This is a capacitive level switch that can be used for various applications with over 1,000 types of electrode shapes and special circuits. It reliably detects even in the following situations: 1. For measurement objects with electrode adhesion or deposits, unique correction functions ensure that adhesion and deposits are not detected. 2. For use in areas with severe vibrations, it is equipped with amplification separation and vibration-resistant measures. 3. For corrosive measurement objects, Teflon-coated electrodes can be used (depending on the measurement conditions). 4. There are no issues with installing multiple units in the same tank (however, if the installation spacing is short, interference countermeasures are required). 5. If you want to detect interfaces, it can be adapted by referring to the relative permittivity of the two liquids, provided the conditions are met. 6. For use in areas with significant temperature differences, there is a condensation prevention specification (indoor use only, with air holes). 7. If you want to confirm ON/OFF without going to the site, there is a version with a visible operation indicator light. 8. If chattering causes frequent ON/OFF repetitions, the ALN type comes standard with an ON delay function (an OFF delay option is also available). If you have any other concerns, please feel free to consult us, and we will help you select the appropriate model for your use.

• Level gauges and level switches

Domestic explosion-proof certification completed! Dust monitor LeakAlert73X and LeakAlert65-02X.

The Electro-Dynamic Dust Monitor LeakAlert73 (integrated type) and LeakAlert65-02 (separated type) have obtained domestic explosion-proof certification, so they can be used in explosion-proof areas. <Integrated Type Explosion-Proof> Model: LeakAlert73X Explosion-Proof Structure: Dust explosion-proof structure "t" by container Applicable Zone: Zone 20 <Separated Type Explosion-Proof> Model: LeakAlert65-02X Explosion-Proof Structure: Dust explosion-proof structure "t" by container Applicable Zone: Zone 22 We can assist with explanations of the dust monitor, selection of sensors suitable for usage conditions, and we also offer the possibility of lending test products, so please feel free to contact us.

• Other measurement, recording and measuring instruments
• Other process controls

Monitoring the concentration of fine dust in the air in workplaces and factories!

The indoor working environment measuring device AirSafe2 measures dust particles in the atmosphere captured by an induced fan and outputs an alarm contact when the set concentration is exceeded. It is capable of continuously monitoring the invisible fine dust generated within the factory. <Features> - Compact design allows for flexible placement! - Ready to use immediately after installation! - Easy to change settings! - Simple maintenance! - Explosion-proof type is also available! *For more details, please refer to the attached PDF or feel free to contact us.

• Other measurement, recording and measuring instruments

New spurious emission standard compliant! Compact and lightweight microwave level switch with a frequency of 24 GHz!

Catch levels of powders, particles, lumps, and crushed materials regardless of the attenuation rate of microwaves. 【Features】 ■ Highly effective in detecting garbage, coal, gravel, and particles ■ Less affected by dirt, adhesion, or scale on the detection surface ■ Compact and lightweight with a 24GHz transmitter and receiver ■ Capable of detecting paper waste, which was difficult with other detection methods Available in screw-in type, heat-resistant type, heat-resistant waveguide extension type, and separation type, we will select the type suitable for your application! *For more details, please refer to the PDF document or feel free to contact us.

• Level gauges and level switches

Non-contact measurement method that does not hinder flow! Applicable to both air transport and free fall systems.

The "SolidFlow 2.0" is an online powder and bulk material flow meter using microwave technology. It can be used for various powders and bulk materials, accommodating particle sizes from 1nm to 10mm. Additionally, it can measure online up to a maximum flow rate of 20t/h and is applicable to both pneumatic conveying and free-fall systems. Examples of applications include measuring and controlling the supply of ferrous sulfate in blending processes (cement) and controlling the speed of screw conveyors. 【Features】 ■ Usable for various powders and bulk materials ■ Applicable to both pneumatic conveying and free-fall systems ■ Improved accuracy with stratified spectral correction ■ Process management with an accuracy of ±2-5% ■ Enhanced wear resistance through non-contact measurement *For more details, please refer to the PDF document or feel free to contact us.

• Flow Meter

Temperature changes are stabilized with compensation functions! It can be easily installed in various locations.

The "M-Sens2 type" is a high-frequency online moisture meter for powders and granules that measures the moisture content of various solids in real-time, allowing for optimal management of processes and product quality. It can be used for various powders and granules, measuring moisture not only on the surface but also internally. It is not affected by flow rate or color changes of the measured material. It can be used in screw conveyors, belt conveyors, drying equipment conveyors, tank bottoms, and mixing processes. 【Features】 ■ Not affected by flow rate or color changes of the measured material ■ Easy installation in various locations ■ Simple and easy calibration ■ Improved wear resistance due to ceramic adoption ■ Temperature changes compensated for stable accuracy *For more details, please refer to the PDF document or feel free to contact us.

• Viscometer
• Other measurement, recording and measuring instruments

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

We will be exhibiting at "CEATEC 2026," which will be held at Makuhari Messe from October 13 to 16. We provide information technology and process informatics (PI) that optimize "how to create" by utilizing physical simulations, AI, and machine learning in process development. We look forward to your visit to our booth. 【Seminar Information】 "Process Informatics for Exploring Optimal Manufacturing Conditions" Date and Time: October 16, 2026 (Friday) 12:45 - 13:00 Venue: Makuhari Messe Exhibition Hall 4 P Stage Speaker: CEO Takaishi Please check the link below for details on our exhibition.