Prepare for the 8th wave of COVID-19 and the influenza outbreak with small emergency batteries.

Important vaccine temperature management | Be fully prepared for power outages with emergency small storage batteries in anticipation of the simultaneous outbreak of the eighth wave of COVID-19 and influenza!

▼Preparation for the simultaneous outbreak of the 8th wave of COVID-19 and influenza To avoid confusion, careful preparation for vaccine storage and administration is necessary as part of the healthcare system's improvement measures. Many have adopted our solutions for power outage measures for freezers installed at mass vaccination sites. 【Power Outage Measures】 ▲ Power outage measures and power backup for ultra-low temperature freezers that store COVID-19 vaccines, etc. ▲ In the event of a power outage, the ultra-low temperature freezer can continue to supply power for approximately 10 hours without stopping (based on a power consumption of 300W). ▲ High output of 1500W! Capable of handling inrush current. ▲ Approximately 270 installations as power outage measures for freezers in municipalities and medical institutions. There have been frequent cases of vaccine disposal due to the inability to maintain the appropriate storage temperature, caused by insufficient power supply for freezers used for vaccine storage or unexpected power outages that stop the freezers. The 'LB0043PE4' is developed with the assumption of emergency power supply for facilities that freeze cells and samples, designed to accommodate inductive loads. It can supply power to ultra-low temperature freezers and refrigerated storage for vaccines for approximately 10 hours without stopping. (Based on a power consumption of 300W).

• Secondary Cells/Batteries

To everyone who has a new type of coronavirus vaccine storage freezer, unexpected disaster and power outage measures can utilize a small storage battery as a backup power source.

【Power Outage Measures】 ▲ Power outage measures for ultra-low temperature freezers storing COVID-19 vaccines and other items, including emergency power supply and power backup. ▲ Provides power to ultra-low temperature freezers for 10 hours without interruption during a power outage (based on a power consumption of 300W). ▲ High output of 1500W! Capable of handling inrush current. - Cases of vaccine disposal due to power outages are occurring frequently. Due to insufficient power capacity, freezers for vaccine storage may experience power shortages, or unexpected power outages may cause freezers to stop, leading to an inability to maintain the appropriate storage temperature, resulting in frequent vaccine disposal cases. CONNEXX SYSTEMS' emergency small storage battery is originally designed for emergency power supply in facilities that freeze cells and specimens, developed to handle inductive loads. It can provide power to ultra-low temperature freezers and refrigerated storage for approximately 10 hours without interruption. (Based on a power consumption of 300W). It is a portable model with large casters, making it easy to move and transport to workplace vaccination sites such as companies and universities. It can continue to be used as a backup power source for important equipment even after the COVID-19 pandemic is over.

• Secondary Cells/Batteries
• Lithium-ion battery
• Power storage device

"Freezer power outage measures / securing power" Emergency small portable battery that can be brought to vaccination sites | An emergency battery is needed in case of a power outage!

**Power Outage Measures and Backup Power Supply Preparation** It is necessary to secure power for the freezer used for storing the COVID-19 vaccine and to prepare an emergency power supply in case of a power outage. There have been frequent cases of vaccine disposal due to insufficient power capacity causing the freezer for vaccine storage to experience power shortages, or unexpected power outages leading to the freezer stopping, which results in the inability to maintain the appropriate storage temperature. The emergency small storage battery from CONNEXX SYSTEMS was originally developed with the assumption of providing emergency power for facilities that freeze cells and specimens, and it is designed to handle inductive loads. It can supply power to ultra-low temperature freezers and refrigerated storage for approximately 10 hours without interruption. (Based on a power consumption of 300W) Being a portable model with large casters, it can be moved easily and brought to vaccination sites. To ensure smooth vaccination, the emergency small storage battery 'LB0043PE4' has already been introduced and utilized as a backup power supply in situations where power outages should not occur. It can continue to be used as a backup power supply for important equipment even after the COVID-19 pandemic is over.

• Secondary Cells/Batteries
• Lithium-ion battery
• Power storage device

[Power Outage Measures] Prepare for a simultaneous outbreak of the new coronavirus "8th wave" and influenza with a fully equipped emergency small storage battery for power outage measures!

【Power Outage Measures】 ▲ As a power outage measure and power backup for ultra-low temperature freezers storing COVID-19 vaccines and other items ▲ Provides power supply to ultra-low temperature freezers for 10 hours without interruption during a power outage (based on a power consumption of 300W) ▲ Proven implementation in approximately 270 municipalities and medical institutions for power outage measures for ultra-low temperature freezers. Due to insufficient power capacity, freezers for vaccine storage have faced power shortages, and unexpected power outages have caused freezers to stop, leading to cases where vaccines could not be maintained at the proper storage temperature and had to be discarded. The 'LB0043PE4' is developed with the assumption of providing emergency power for facilities that freeze cells and specimens, capable of handling inductive loads. It can supply power to ultra-low temperature freezers and refrigerated storage for approximately 10 hours without interruption (based on a power consumption of 300W). In preparation for the simultaneous outbreak of the COVID-19 "8th wave" and influenza, there have been numerous inquiries regarding the purchase of additional emergency small storage batteries, as well as considerations for switching from leased or rented equipment due to concerns over running costs during the prolonged pandemic, highlighting the demand for portable small storage batteries as disaster prevention and power outage measures.

• Secondary Cells/Batteries
• Lithium-ion battery
• Power storage device

Ensuring Power for Freezers / Power Outage Measures: Portable emergency batteries that can be brought to workplace vaccination sites | An emergency power source is necessary in case of unexpected power outages!

【Power Outage Measures and Backup Power Supply】 It is necessary to secure power for the freezer used for storing the COVID-19 vaccine and to prepare an emergency power supply in case of a power outage. There have been frequent cases of vaccine disposal due to insufficient power capacity causing the vaccine storage freezer to experience power shortages or unexpected power outages leading to the freezer stopping, resulting in an inability to maintain the appropriate storage temperature. CONNEXX SYSTEMS' emergency small storage battery is originally designed for emergency power supply in facilities that freeze cells and specimens, developed to handle inductive loads. It can supply power to ultra-low temperature freezers and refrigerated storage for approximately 10 hours without interruption. (Based on a power consumption of 300W) Being a portable model with large casters, it can be easily moved and brought to vaccination sites at companies and universities. To ensure smooth vaccination, the emergency small storage battery 'LB0043PE4' has already been introduced and utilized as a backup power supply in situations where power outages should not occur. It can continue to be used as a backup power supply for important equipment even after the COVID-19 pandemic is over.

• Secondary Cells/Batteries
• Lithium-ion battery
• Power storage device

In summer construction sites, the surface temperature of the ground plates and the heat reflection can affect the working environment. In particular, steel plates tend to retain heat when exposed to sunlight, making it a challenge to implement heatstroke prevention measures and improve the site environment for workers. Hyper CLT ground plates are civil engineering materials that utilize wood CLT. As wooden ground plates, they can be used for temporary roads, access routes, heavy machinery work yards, material storage areas, and pedestrian pathways, serving as a versatile alternative to steel plates in various civil engineering sites. In actual sites, there are cases where the surface temperature can differ by about 20 degrees compared to steel plates, making them an easy-to-suggest material for reducing heat reflection and preventing heatstroke in summer. The 5×10 plate weighs approximately 230 kg, and the 5×20 plate weighs about 460 kg, making them lightweight and easy to handle even with small machinery, which also helps reduce construction burdens. Additionally, they feature noise reduction, environmental consideration, and CO2 fixation, which are unique to wood. As a registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A," these ground plates are also easy to utilize for innovative ideas and safety measures in public works. Companies looking to improve summer site environments are encouraged to consider Hyper CLT ground plates.

In civil engineering sites, there are many opportunities to use temporary roadways, access roads, heavy machinery work yards, and material storage areas with sheets. Until now, steel plates have been widely used, but there is a growing interest in temporary materials made from wood due to environmental considerations and CO2 reduction. Hyper CLT sheets are civil engineering CLT materials made from wood CLT. As wooden sheets, they can be used for mud prevention, ground protection, ensuring work pathways, and as a substitute for steel plates. The 5×10 sheet weighs about 230 kg, and the 5×20 sheet weighs about 460 kg, making them lightweight and reducing the burden of transportation, installation, and removal. Wood has the property of fixing CO2, and further improvements in transportation efficiency can be expected due to its lightweight nature. These materials also help improve the site environment by reducing glare and noise. In public works, they are easy to use as materials for environmental considerations, safety measures, and creative proposals, making them recommended for companies aiming to enhance site evaluations. Please consider them as a new sheet selection for civil engineering sites, registered as "TH-250021-A" in the Ministry of Land, Infrastructure, Transport and Tourism's NETIS. We can provide proposals tailored to site conditions, from public works to private civil engineering projects.

Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods can alter the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" or "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material with heat. Repairs can be performed even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Thank you very much for your continued support. We sincerely apologize for the inconvenience, but we will be taking our summer vacation on the following dates. ■ Summer Vacation Period ■ From Tuesday, August 11, 2026, to Sunday, August 16, 2026. For details such as shipping schedules, please check our company website via the link below. Please note that we will resume normal operations on August 17. Inquiries during the vacation period will also be addressed after August 17. We apologize for any inconvenience this may cause and appreciate your understanding. Earth Power Co., Ltd.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four ways: left, center, right, with 4 spots and 12 spots settings. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor modes with a single model. 【Recommended for such places!】 ☑ Entrances facing busy corridors ☑ Counters or signs near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.