Bode plot video

Mixed Signal Oscilloscope MSO5000 Series with Excellent Cost Performance

The MSO5000 series digital oscilloscope is a high-performance and economical digital oscilloscope of the UltraVision II technology generation. Equipped with class-leading sampling and memory length, it features a self-developed chipset that enables high-functionality measurements as a mixed signal oscilloscope. ■ Frequency bandwidth: 70 / 100 / 200 / 350 MHz Sampling rate: Up to 8G samples/second Memory length: Up to 200M points Waveform capture rate: 500,000 wfms/s ■ Serial bus trigger & decode standard equipped ■ Integration of seven types of measurement instruments into one ■ Comfortable operation and confirmation possible with a 9-inch touchscreen *For more details, please refer to the PDF document or feel free to contact us.

• oscilloscope

(Limited model campaign until the end of June) High-performance mixed signal oscilloscope of the UltraVision II technology generation.

A high-performance mixed signal oscilloscope equipped with a self-developed chipset featuring class-leading sampling and memory length, suitable for embedded design, power analysis, serial decoding, RF applications, jitter and eye pattern analysis, and more. - Frequency range: 600MHz / 1GHz / 2GHz - Sampling rate: up to 10G samples/second, memory length: up to 500M points, waveform capture rate: 600,000 wfms/s - Standard equipped with serial bus trigger & decode - Eye pattern analysis included - Integrates seven types of measurement instruments into one - Comfortable operation and confirmation possible with a 10.1-inch touchscreen * For more details, please refer to the PDF document or feel free to contact us. Until the end of June, we are running a free upgrade campaign for the MSO8064 model from 600MHz to 1GHz. For campaign details, demo units, or quotes, please contact us at the email below. Email: liangpeng@rigol.com

• oscilloscope

Equipped with the in-house developed chipset "Centaurus"! All models support 12-bit standard.

The "HDO1000 series" is a digital oscilloscope with frequency bandwidths of 70MHz, 100MHz, and 200MHz. It has 4 or 2 analog channels, with a maximum sampling rate of 1GSa/s. Additionally, it features a vertical resolution of 12 bits and includes five types of serial decoding functions. 【Features】 ■ 4 or 2 analog channels ■ Maximum sampling rate: 1GSa/s ■ Vertical resolution: 12 bits ■ Vertical axis range: 500μV/Div to 10V/Div *For more details, please refer to the PDF document or feel free to contact us.

• oscilloscope

Ultra-low noise floor of 18μVrms (typical value)! Frequency bands of 200MHz, 400MHz, and 800MHz.

The "HDO4000 Series" is a digital oscilloscope equipped with the self-developed chipset "Centaurus." All models support a standard of 12 bits, with an ultra-low noise floor of 18μVrms (typical value). Additionally, the interfaces include USB, LAN, and HDMI, with frequency bandwidths of 200MHz, 400MHz, and 800MHz. 【Features】 ■ 4 analog channels ■ Maximum sampling rate: 4GSa/s ■ Vertical resolution: 12bit ■ Vertical axis range: 100μV/Div to 10V/Div (1MΩ) *For more details, please refer to the PDF document or feel free to contact us.

• oscilloscope

Arbitrary Waveform/Function Generator DG2000 Series

The DG2000 series is a multifunctional signal generator equipped with features such as arbitrary waveform/function generators, function generators, arbitrary waveform generators, noise generators, pulse generators, code generators, harmonic generators, analog/digital modulators, and frequency counters. The new interface design provides a user-friendly experience.

• Signal Generator

Arbitrary Waveform/Function Generator DG900 Series

The DG900 series arbitrary waveform/function generator is a multifunctional signal generator equipped with features such as a function generator, arbitrary waveform generator, noise generator, pulse generator, code generator, harmonic generator, analog/digital modulator, and frequency counter. The new interface design provides a user-friendly experience.

• Signal Generator

Arbitrary Waveform/Function Generator DG800 Series

The DG800 series arbitrary waveform/function generator is a multifunctional signal generator equipped with features such as a function generator, arbitrary waveform generator, noise generator, pulse generator, code generator, harmonic generator, analog/digital modulator, and frequency counter. The new interface design provides a user-friendly experience.

• Signal Generator

An online seminar that is helpful for not only science and engineering students and new engineers but also veteran engineers, providing insights that are "eye-opening."

RIGOL Online Seminar https://jpmall.rigol.com/ (Seminar videos available from the middle section onward) Session 1: The Role Distribution of Digital Multimeters and Oscilloscopes Session 2: How to Choose an Oscilloscope with What Frequency Bandwidth in MHz Session 3: Measurement Starts with Probe Preparation Session 4: The Mechanism of Probes Session 5: How to Determine Voltage Sensitivity to Maximize Performance Session 6: How to Determine Time Settings to Maximize Performance - The Impact of Sample Rate

• oscilloscope

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

In future public works, not only construction quality but also safety measures, environmental considerations, labor-saving, and the use of new technologies will be important, along with the ingenuity applied on-site. In this context, the "Hyper CLT Board," a wooden lightweight mat using CLT, can be utilized. It can be used as a wooden mat for temporary roads, access routes, and heavy machinery work yards, and the 5×10 board weighs approximately 230 kg, making it relatively lightweight. In addition to ease of installation, removal, and relocation, it features the suppression of glare and metallic sounds unique to wood, as well as environmental considerations. Furthermore, it is a product that can easily incorporate proposals for the use of new technologies and creative ideas, as it is registered with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS as "TH-250021-A." However, simply being registered with NETIS does not automatically result in additional points. What is important is to clarify the purpose and effects of its use on-site. Wooden mats, NETIS, civil engineering, CLT. The Hyper CLT Board is a new option to connect on-site ingenuity to evaluation.

Our company has launched the new "Kappa twin" dual-wheel caster for ultra-heavy load transport. It achieves a high load capacity of up to 2,200 kg per wheel, making it an optimal solution for transporting heavy items in industries such as automotive, aerospace, special vehicles, and heavy industry. The dual-wheel structure distributes the load, balancing high load capacity with excellent mobility. By reducing starting and rolling resistance, it supports smooth transport even for trolleys in the several-ton class. Additionally, it excels in turning performance, contributing to improved maneuverability in limited spaces. It is also suitable for AGVs (automated guided vehicles) and heavy transport trolleys, providing the stability, durability, and safety required in high-load environments. It covers weight ranges that were difficult to address with conventional products, contributing to solving transport challenges in manufacturing settings. This new product is recommended for companies looking to transport ultra-heavy items "more lightly and more safely."

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.