[March 8 (Wed) - March 10 (Fri), 2023] Announcement of participation in the "2nd Food Tech Japan Osaka - Automation and DX Exhibition for Food Factories"

We provide a one-stop service for parts processing of various materials, surface treatment, and inspection, achieving stable supply of parts with a minimum estimate of half a day.

The area of response for procurement of processed parts covers all 47 prefectures in Japan! We provide precision processed parts with small lots, prototype development components, quality assurance included, and delivery management. By eliminating invisible costs, you can focus on improving your original productivity. We solve the complexities of purchasing and procurement, as well as the challenges related to manufacturing, to maintain quality and enhance productivity. "30 years of proven results! Over 1,110 partner companies!" Point 1: Supports single-item processing and small lots of various types. Point 2: Consolidates contact points with a dedicated technical sales guarantee system. Point 3: Inspections are conducted at our quality control center, specializing in quality assurance. Point 4: Drawings for estimates can be in either 3D or 2D. Point 5: We can handle drafting even without possible drawings. Point 6: We have a wide range of industry experience, including automotive, semiconductors, food, and medical sectors. Point 7: You can request parts made from various materials, including metals and plastics. "Commitment to Quality and the Environment" We have established an environmental management system compliant with ISO 14001 and promote environmental conservation activities. Aiming for "zero quality defects," we conduct final inspections in our quality control department. From metals to resins, leave the cutting and processing of prototype and development parts to us.

• Processing Contract

Shortest half-day estimate / Manufacturing of parts without drawings (reverse engineering) / We handle everything from scanning the actual item to processing based on drawings.

Do you have any of the following concerns regarding parts procurement? 1. The parts have been discontinued, and there are no suppliers available. 2. I can no longer rely on the manufacturing company I had requested. 3. The parts are damaged or worn and need replacement, but they are old parts and there are no drawings available. 4. There are no drawings, and I want to create the same item from the actual part. → Our company, which has three quality control centers in Japan, can take your actual part and handle everything from drawing creation to processing and inspection in one go. We perform scan modeling using non-contact 3D scanner-type three-dimensional measuring machines and image dimension measuring devices to reproduce the drawings. Additionally, we can handle quantities starting from single-item processing! We streamline your procurement process with a single point of contact for surface treatment, hardening, polishing, and more. Furthermore, our company also accepts measurements and evaluations of dimensions, geometric tolerances, three-dimensional measurements, curved surfaces, roundness, surface roughness, etc. We can handle everything from metals to plastics! Trust us with the cutting processing of prototype and development parts. For more details, please contact us or download our catalog.

• Contract measurement

Shortest half-day estimate / Introduction of new inspection equipment! VL500 / Keyence supports high-precision measurements with 360-degree all-around scanning.

Are you having trouble measuring geometric tolerances, curved surfaces, and complex shapes that are difficult with calipers and three-dimensional measuring machines? Our company offers measurement services for areas where calipers and three-dimensional measuring machines struggle, tailored to various measurement needs, including geometric tolerances, virtual lines, and curved surfaces. We would like to introduce the 3D scanner-type three-dimensional measuring machine we use for this purpose. ◎ VL-500 / Keyence "Features" - Measures large objects as connected data without the need for markers. - Acquires 3D data with 360-degree scanning, leaving no blind spots. - Capable of measuring shapes that could not be captured with a measurement resolution of 16 million points. - Compares good and defective products to measure and visualize shape differences. - Outputs measurement result data by comparing point cloud, mesh data, and CAD. - Reverse engineering (creating drawings of parts). In our measurement service business, we take custody of inspection items, and our inspection technicians conduct thorough inspections of all areas. We possess a wide range of the latest digital measuring equipment, including CNC three-dimensional measuring machines and image dimension measuring devices. We can handle everything from metal to resin! Leave the machining of prototype and development parts to us.

• 3D measuring device

The shortest estimate is half a day / SPCC (thin plate) was laser cut and then subjected to press bending processing. It is a protective cover for the exterior of the device, made from processed thin plate metal parts.

We handle leather cutting, bending processing, and baked-on painting all in one place. Our company also accepts sheet metal processing such as laser processing and welding. Our partner company uses an Amada punch-laser combination machine, which allows us to accommodate outer shape processing for SPC materials up to 9mm thick and SUS materials up to 6mm thick. *Please note that there may be cases where processing cannot be performed depending on the inquiry. We can also handle bending processing with a bending machine. We accept various types of painting and surface treatment after processing as well. In particular, please trust us with small quantities of various types, prototype parts, industrial robot parts, development parts, optical device parts, and semiconductor manufacturing equipment-related parts. For over 30 years, our company has provided processed parts to customers in various industries. We also offer quality assurance and have strengths in inspection technology. If you would like to see more of our achievements, please download the catalog below. Additionally, we can handle cutting processing for prototype and development parts, from metals to plastics! Our official website also features processing achievements for sheet metal products, so please take a look.

• Other machine elements

Sekisui Filler Co., Ltd. will exhibit at the "Automotive Technology Exhibition 2026 YOKOHAMA" held at PACIFICO YOKOHAMA from May 27. (Booth number 285, within the Sekisui Chemical booth) 【Exhibited Products】 Mobility G - Re-sealable gasket HM (EV Seal 500) - Interior materials (Thermonex/Swiftlock) - Battery protection materials (EV Protect 4006SFR, etc.) Electronics / Automotive Electronics - Adhesives for camera modules - Adhesives for displays - Conformal coatings - Optical adhesives We sincerely look forward to your visit.

Dear Sir or Madam, We hope this message finds you well and that your company continues to prosper. FUKUDA will be exhibiting at the 28th INTERPHEX Week Tokyo. At the exhibition, we will be showcasing 100% inspection equipment compliant with Container Closure Integrity Testing (CCIT) standards, as well as sampling inspection machines. We sincerely invite you to visit our booth at this opportunity and would greatly appreciate your attendance despite your busy schedule. Yours sincerely, [Dates] May 20 (Wed) - 22 (Fri), 2026 10:00-17:00 (JST) [Venue] Makuhari Messe, Japan 8 Hall Booth No. 41 - 36

Dear Sir or Madam, We hope this message finds you well and that your company continues to prosper. FUKUDA will be exhibiting at the AUTOMOTIVE ENGINEERING EXPOSITION 2026 YOKOHAMA. At this exhibition, we will be showcasing testing equipment such as Air Leak Tester for EV and Equipment Mounted Type Hydrogen Leak Detector. We sincerely hope you will take this opportunity to visit us. Yours sincerely, [Official Site] https://aee.expo-info.jsae.or.jp/en/yokohama/ [DATES] Wednesday, May 27, through Friday, May 29, 2026 10:00 a.m. - 5:00 p.m. [VENUE] PACIFICO Yokohama, Exhibition Hall, Booth No. ２７４ ※Online Exposition Website：Tuesday, May 19, through Tuesday, June 9, 2026

Daiamet Co., Ltd. will exhibit at the "Automotive Technology Exhibition 2026 YOKOHAMA," held at Pacifico Yokohama from May 27 (Wednesday) to 29 (Friday), showcasing the "sintered spur gear for EV cooling modules using high-density heat treatment materials," which is mounted on the cooling module for BEVs (Battery Electric Vehicles) that won the Japan Powder Metallurgy Association's 2025 Industrial Association Award (New Product Design Category). This product is a spur gear used in the valve for switching the flow path of the cooling module for BEVs. By combining sintered materials with unique heat treatment technology, it achieves both high strength and high airtightness, addressing the issues of strength and wear resistance that were challenges with resin gears. Additionally, to tackle the airtightness issues caused by the pores inherent in sintered parts, high airtightness has been secured by optimizing the steam treatment conditions, enabling mass production. This technology is expected to see further adoption as the BEV cooling module market expands. At the venue, we will introduce a wide range of our products and technologies, including the newly exhibited sintered spur gear for EV cooling modules, cores for servo motors, various motor cores, transformers for DC-DC converters, sintered mechanical parts, and sintered oil-impregnated bearings.

The first step in DX is essential understanding and penetration into the field. While improving meter reading operations and addressing human error, we will introduce hints for achieving paperless and digital management. Last year marked the year when all members of the baby boomer generation became late-stage elderly, aged 75 and older. In industries that rely heavily on human labor, such as maintenance, this situation is serious, with indications that by 2030, more than 30% of equipment may not be maintainable. The issue of labor shortages in an aging workforce is becoming an imminent crisis, making the realization of DX in the field an urgent necessity. In this seminar, based on customer cases using the meter reading app "hakaru.ai by GMO," we will introduce hints on how to advance the DX of inspection management operations from the perspectives of building management and equipment management in manufacturing. 【Recommended for the following individuals】 - Those struggling with promoting DX in equipment management - Those feeling challenges in meter reading for equipment management or production management - Those considering advancing paperless and digitalization - Management personnel and equipment maintenance staff who want to promote DX.