February Online Video Seminar Held! ~Electroforce Seminar~

Equipped with a high-precision displacement gauge, this material testing device features a linear motor from Bose.

The "ElectroForce 3200" is a tabletop testing device capable of handling a maximum load of 225N (optional 450N) and can operate at test frequencies from 0 to 300Hz. Equipped with a high-precision displacement gauge, it allows for testing of minute displacements, enabling a broader range of tests. Additionally, an optional temperature-controlled chamber (from -150 degrees to 315 degrees) and a saline solution tank can also be installed. This product is controlled by a digital control device called "WinTest." This software allows users to quickly learn how to operate it and easily set test conditions. Furthermore, the product is maintenance-free and can perform various tests with a single testing machine. 【Features】 ■ Bose linear motor: 10-year warranty, maintenance-free, patented ■ Low power consumption ■ Quiet operation ■ Easy to operate ■ Capable of various tests with one machine *The comprehensive catalog for the ElectroForce series can be downloaded from this page.

• Testing Equipment and Devices

World leader in thermal analysis, calorimetry, and rheology / Comprehensive catalog of TA Instruments.

◆TA Instrument Handled Products◆ ■Thermal Analysis Equipment Differential Scanning Calorimeter Discovery DSC Thermogravimetric Analyzer Discovery TGA Differential Scanning Calorimeter DSC Thermogravimetric Analyzer TGA Vapor Adsorption/Desorption Measurement Device VTI-SA+ Simultaneous Differential Thermal and Thermogravimetric Analyzer SDT Thermomechanical Analyzer TMA Dynamic Mechanical Analyzer DMA ■Thermal Property Measurement Equipment Laser Flash Method Thermal Property Measurement Device DLF Xenon Flash Method Thermal Property Measurement Device DXF Thermal Conductivity Measurement Device DTC FOX Thermal Expansion Measurement Device DIL ODLT, ODHT P11 Heating Microscope HSM, HSML Fleximeter FLEX ■Viscoelasticity Measurement Equipment DHR ARES-G2 RSA-G2 Air Chiller System ACS-3 Rubber Testing Machine ■Microcalorimeters Isothermal Titration Calorimeter Nano ITC, Affinity ITC Differential Scanning Calorimeter Nano DSC Multi-Cell Differential Scanning Calorimeter MC DSC Isothermal Calorimeter TAM ●For other functions and details, please download the catalog or contact us.

• Analytical Equipment and Devices

Accurate, precise, and versatile DMA measurements are possible! An ideal viscoelastic measurement device for high-rigidity materials.

The DMA 850 is the world's most powerful dynamic mechanical analysis device. With its non-contact low-mass motor and frictionless low-compliance air bearing design, it accommodates the measurement of all materials, from flexible to rigid. Its unique optical encoder technology and DirectStrain function allow for precise measurement of a wide range of sample stiffness and frequency. The new "app-style" touchscreen and TRIOS software make it easy to obtain excellent data.

• Analytical Equipment and Devices

Dynamic mechanical analysis (DMA) measuring device capable of handling a wide range of applications from research and development to quality control.

The "RSA-G2" is a measurement device with outstanding performance in solid viscoelastic analysis. By separating the motor and transducer, this product ensures pure mechanical analysis data through independent deformation control and stress measurement. In addition to providing accurate DMA measurements, it is capable of various measurements such as creep/recovery, stress relaxation, constant strain, and fatigue testing. It can also function as a dielectric measurement device (DETA), allowing for independent measurements as well as simultaneous dielectric and viscoelastic measurements. 【Features】 ■ Individual measurement of stress and strain ■ Guarantees pure mechanical analysis data ■ Capable of a wide range of applications from research and development benches to quality control ■ Various measurements are possible ■ Simultaneous measurements of independent and dielectric measurements with viscoelastic measurements are also possible *The comprehensive catalog can be downloaded from this page. The individual product catalog is only the cover, so if you would like the complete version, please contact our sales representative.

• Analytical Equipment and Devices

Application Introduction / Vibration Absorption and Viscoelastic Properties of Polyolefin-based Materials - Measurement and Control of Residual Solvent Levels in the Wire Coating Process

◆Vibration Absorption and Viscoelastic Properties of Polyolefin-based Materials Materials with vibration absorption properties are attracting attention as they enable improvements in labor and living environments through soundproofing and vibration isolation. It is believed that vibration absorption occurs due to energy loss associated with internal friction in the material, and the amount of energy loss is known to correlate with the material's viscoelastic properties. By conducting viscoelastic measurements of the material, information regarding vibration absorption can be obtained. ◆Measurement and Control of Residual Solvent Levels in Wire Coating Processes Insulated wires used in discrete wiring circuit boards can cause various product defects (blisters, delamination, etc.) due to residual solvents present in the wire coating material. However, by utilizing thermal analysis techniques for the detection and quantification of residual solvents, it is possible to implement high-precision quality control.

• Analytical Equipment and Devices

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

We will be exhibiting at "CEATEC 2026," which will be held at Makuhari Messe from October 13 to 16. We provide information technology and process informatics (PI) that optimize "how to create" by utilizing physical simulations, AI, and machine learning in process development. We look forward to your visit to our booth. 【Seminar Information】 "Process Informatics for Exploring Optimal Manufacturing Conditions" Date and Time: October 16, 2026 (Friday) 12:45 - 13:00 Venue: Makuhari Messe Exhibition Hall 4 P Stage Speaker: CEO Takaishi Please check the link below for details on our exhibition.