[Exhibition Participation Announcement] Food Tech Japan Osaka March 8-10

Shall we finally solve your concerns about "sticking" and "wear"?

The original surface treatment (coating) "JC Coat" was born from the surface treatment technology cultivated in electronic component manufacturing. Based on DLC coating*, it is a contract coating that imparts various characteristics through our unique technology, and it is used in printing masks, food manufacturing equipment, and industrial machinery. *DLC coating... stands for diamond-like carbon. JC Coat PH has low adhesion to soft metals and a low wear coefficient, making it a specification with the highest hardness in the series and a wide range of applications. It can accommodate various metals and ceramics, and when there are tools and process line equipment parts that frequently contact soft metals, it strongly supports the reduction of adhesion and the resolution of cleaning issues. 【Features】 ■ Capable of film formation at low temperatures ■ Can form a film down to fine details, accommodating complex structures ■ More cost-effective compared to general DLC ■ Complies with domestic food contact material regulations 【Examples of Use】 ■ Food slicing blades: improved wear resistance ■ Blades for electronic components: prevention of adhesion to soft metals For more details, please feel free to contact us.

• Other metal materials

I don't want to have adhesion, but I'm worried about various coatings... This is for those people!

The original surface treatment (coating) "JC Coat" was born from the surface treatment technology cultivated in the manufacturing of electronic components. Based on DLC coating*, our unique technology provides various characteristics, making it suitable for use in printing masks, food manufacturing equipment, and industrial machinery. *DLC coating…short for diamond-like carbon By processing JC Coat P on parts of the manufacturing line and imparting anti-fouling properties, we expect to achieve labor-saving maintenance and cleaning. This will lead to significant process improvements across the entire line. 【Features】 ■ No need for redesign considerations due to the thin film coating ■ Strong adhesion to the substrate makes it difficult to peel off, eliminating concerns about foreign material contamination ■ Approximately 4-5 times harder than stainless steel ■ Complies with domestic regulations for food contact materials in Japan 【Examples of Applications】 ■ Food-related Weighing devices…Improved yield, reduced cleaning costs Conveying lines…Stable supply, reduced cleaning costs ■ Industrial-related Precision nozzles…Improved liquid discharge Cutter blades…Maintains sharpness while suppressing adhesion of adhesives and other materials For more details, please feel free to contact us.

• Surface treatment contract service
• Other metal materials
• Coating Agent

I don't want to have adhesion, but I'm worried about various coatings... This is a case study for those in that situation!

The original surface treatment (coating) "JC Coat" was born from the surface treatment technology cultivated in electronic component manufacturing. Based on DLC coating*, it is a contract coating that incorporates various characteristics through our unique technology, and is used in printing masks, food manufacturing equipment, and industrial machinery. *DLC coating... stands for diamond-like carbon. By processing JC Coat P on parts of manufacturing lines in food factories and industrial plants, we provide anti-fouling and water and oil repellency, which leads to reduced cleaning and maintenance time, prevention of work-related accidents, and reduced waste. A significant feature is that, due to the structure of the coating, it is difficult for it to peel off in chunks. Here, you can download a collection of case studies summarizing the applications of JC Coat P. 【Features】 ■ No need for redesign considering the coating due to its thin film ■ Strong adhesion to the substrate makes it difficult to peel off, eliminating concerns about foreign matter contamination ■ Has a hardness approximately 4-5 times that of stainless steel ■ Complies with domestic regulations for food contact materials in Japan

• Processing Contract
• Surface treatment contract service

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

We will be exhibiting at "CEATEC 2026," which will be held at Makuhari Messe from October 13 to 16. We provide information technology and process informatics (PI) that optimize "how to create" by utilizing physical simulations, AI, and machine learning in process development. We look forward to your visit to our booth. 【Seminar Information】 "Process Informatics for Exploring Optimal Manufacturing Conditions" Date and Time: October 16, 2026 (Friday) 12:45 - 13:00 Venue: Makuhari Messe Exhibition Hall 4 P Stage Speaker: CEO Takaishi Please check the link below for details on our exhibition.