Notice of Participation in Medtec Japan

Design to suppress blockage! Automatic control of stability, application, and solvent amount levels.

"DOSASET" is a dispenser designed for manually applying cyclohexanone and similar solvents to medical devices such as tubes and joints. The adapter is designed to be directly immersed in the solvent, which helps to suppress issues such as clogging and sticking. It allows for easy and quick operation. 【Features】 ■ Structure that minimizes clogging and blockage, reducing maintenance frequency ■ Stable application only to specified tube adapter shapes ■ Suppression of solvent evaporation due to the solvent immersion chamber structure ■ Tubes can be inserted without twisting the wrist, reducing the burden on the operator ■ Automatic management of solvent levels; the structure prevents operation when the level is insufficient due to a shutter mechanism *For more details, please refer to the PDF materials or feel free to contact us. *This product is available for trial at our Tokyo showroom or for loan of the actual device.

• Other machine elements

It is possible to produce high-quality work without damaging delicate work and without destructive testing. It is a fully synchronized system that is resilient to variations in work and environment.

Sensors and controllers using chromatic confocal measurement technology. We offer various options tailored to your work and environment. They are utilized in industries such as automotive, semiconductor, and glass worldwide. <Advantages> - Non-contact technology suitable for measuring soft or opaque materials (e.g., aluminum rolls, copper rolls, lithium-ion battery separators) - Capable of measuring layer thickness from 5µm - Wide measurement range suitable for inline use - High sensitivity and high precision (the reproducibility range of total thickness in actual applications is within 1µm) - Provision of measurement forks or a complete set of gauging equipment - Quick-SPC software option enables statistical processing and data transfer If you have the following challenges, please download the PDF and consult with us. - Variations in work or environment - Synchronization using multiple sensors - Mechanical alignment (tilt or misalignment) - Detailed understanding of measurements - Special applications requiring customization *For more details, please refer to the PDF document or feel free to contact us.

• Sensors

Benchtop type! Can be used easily and quickly, reducing inspection time and improving measurement performance.

The "SUPER-MECLAB+.T40" is a high-precision measuring instrument for ultra-high precision outer diameter measurement of workpieces with odd and even blades/grooves. It allows for checking of workpieces with odd blades and grooves. It can be used extremely easily and quickly, reducing inspection time and improving measurement performance. Additionally, it has high flexibility and can measure various components and dimensions without the need for system presets or remastering. 【Features】 ■ Zero error due to hysteresis (reversal error) commonly seen in all dial indicator gauges ■ Non-contact measurement: does not damage or scratch the workpiece ■ Objective and highly reproducible measurement results that do not depend on the operator's skill ■ Capability to check workpieces with odd blades and grooves *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• Other measurement, recording and measuring instruments

It is possible to measure wires, cables, and other similar products!

The HWS.3 is a portable optical micrometer that non-contact measures wires, cables, and more. Developed using LED and CCD technology, it automatically corrects positioning errors using two intersecting linear sensors. Thanks to a powerful single-chip microprocessor, it is linearized and corrected, providing excellent accuracy across the entire measurement range, regardless of the position of the wire. It can also be used for measuring moving molded products. 【Features】 ■ Measurement starts with a press of the trigger and completes in just a few seconds ■ Measurement results are displayed in 3D on the screen ■ All measurements are saved in the scanner's internal memory with date, time, and production ID ■ Data can be downloaded to any PC via USB cable *For more details, please refer to the PDF document or feel free to contact us.

• Optical Measuring Instruments

Automatically control the extruder to stay within tolerance limits! High-performance feedback is possible with a 2-axis gauge.

"Extruline.XY" is a laser system specially designed for the outer diameter management of extruded products. In addition to diameter measurement and tolerance checks, it can control the automatic extrusion process and detect defects in all diameters along the length of the product. Thanks to non-contact technology, it can measure products that are difficult to measure with traditional contact methods, which could damage the product, as well as high-temperature or soft moving molded products. 【Features】 ■ High-performance feedback enabled by a 2-axis gauge ■ Two functions in one device: diameter control and defect detection ■ Significant material savings: production possible at the lower tolerance limit through extrusion machine control ■ Automatic control function contributes to cost reduction ■ Non-contact measurement for on-machine applications and overall product management *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines
• Other measurement, recording and measuring instruments

Achieve high-precision non-contact measurement in seconds <Test measurement of workpieces available (please inquire)>

OptoFlash achieves high-precision measurements by acquiring and analyzing optical images. It enables fast and accurate measurements in production environments of small parts where high precision is required, such as in automotive, general manufacturing, aerospace, and medical fields. It is particularly suitable for dimension verification of electric motor shafts, electronic connectors, hydraulic circuit components, screws, and more. <Main Features> 1. Ultra-fast - The 2D optical technology enables a reduction in cycle time. - The cycle time is remarkably fast, executing 100 static measurements in just 2 seconds. 2. High flexibility - Capable of measuring a wide variety of shapes, from bolts to small shafts. - Achieves static and dynamic measurements of outer diameter, length, roundness, cylindricity, coaxiality, taper, grooves, chamfers, R (shape), shaft runout, screw dimensions, etc., in just a few seconds. 3. Ease of use - The measurement screen is user-friendly while equipped with multi-level access features, allowing level settings according to the operator's tasks and permissions. - Open loading without doors enables robot compatibility, allowing for automation without the need for an operator. 4. Durability - The fixed position of the 2D sensor eliminates mechanical stress. Measurement performance remains consistently stable over millions of cycles. - The need for maintenance is also minimized.

• Other measurement, recording and measuring instruments
• Other inspection equipment and devices
• Optical Measuring Instruments

To streamline the quality control of shafts and fastening components, and to eliminate setup time. A free online seminar on non-contact measurement will be held.

Our company offers a non-contact measurement solution that contributes to the realization of a flexible line through "OptoQuick" and "OptoFlash." "OptoQuick" enables precise non-contact scanning using optical sensors. It can measure eccentric workpieces, crankshaft pin bearings, joints, and more with high reliability. Additionally, it can be used very close to machine tools, contributing to faster quality inspections. It boasts excellent operability, allowing for easy setup changes and modifications to measurement programs. The "OptoFlash" for small parts excels in measurement speed due to the absence of vertical movement of the sensor and workpiece, executing 100 static measurements in just 2 seconds. 【We respond to the following needs】 ◎ Considering the introduction or switch to a non-contact measurement solution ◎ Planning to eliminate setup times and mix flows for a variety of products ◎ Wanting to enhance traceability while conducting flexible production ★ We are holding a free online seminar on non-contact measurement solutions. Please refer to the basic information section or materials for seminar details. *Detailed information on each product can be viewed via PDF download.

• Other measurement, recording and measuring instruments

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

We will be exhibiting at "CEATEC 2026," which will be held at Makuhari Messe from October 13 to 16. We provide information technology and process informatics (PI) that optimize "how to create" by utilizing physical simulations, AI, and machine learning in process development. We look forward to your visit to our booth. 【Seminar Information】 "Process Informatics for Exploring Optimal Manufacturing Conditions" Date and Time: October 16, 2026 (Friday) 12:45 - 13:00 Venue: Makuhari Messe Exhibition Hall 4 P Stage Speaker: CEO Takaishi Please check the link below for details on our exhibition.