Notice of Participation in "OPIE'23" from April 19 (Wednesday) to April 21 (Friday), 2023.

A wide range of applications from plasma monitoring to pharmaceutical analysis. Excellent thermal stability allows for adaptation to changes in the measurement environment.

● Supports a wide wavelength range of 190-1150 nm (dependent on the grating) ● Resolution and throughput can be adjusted according to your requirements ● Achieves high-speed measurements with a minimum exposure time of 1 µs ● High S/N ratio (380:1) allows for lower noise and higher precision measurements compared to conventional standard types Demo units are available for loan! Please feel free to contact us through the inquiry form! 【For customers using Ocean Optics products】 The following products have been discontinued: HR2000/HR4000/MAYA2000PRO We are currently providing guidance with this product.

• Spectroscopic Analysis Equipment

Electron beam lithography equipment, EUV exposure equipment, nanoimprint lithography applications. Two types available: powder and solution!

AQM's H-SiOx is a negative-type resist available in both powder and solution forms. It offers performance comparable to Dow XR-154 and FOX. Each form has its own characteristics. 【Powder】 Long-term storage possible: Can be stored for up to one year, allowing for gradual use over an extended period. Immediate availability: Can be obtained quickly when needed. Consistent viscosity: Does not thicken as it is mixed before use. Adjustable concentration: Capable of creating a wide range of film thicknesses tailored to applications. Highest level of line width: Achieves a line width of 7nm. 【Liquid】 Available for purchase in small quantities: Can be tailored to the required amount. Short delivery time: Delivery can be made within one month after order. Made to order: Can be delivered with a longer shelf life. Highest level of line width: Achieves a line width of 7nm. For inquiries, please contact our representative, Kitano.

• Resist Device

[Demo unit available] Compact spectrometer with excellent sensitivity in the ultraviolet range.

The Ocean ST is a spectrometer that achieves an ultra-compact size comparable to a golf ball while featuring excellent UV response (185-650 nm), high-speed spectral acquisition, and a high signal-to-noise ratio performance. Despite its small and lightweight design, it enables complete spectral analysis with performance comparable to large and expensive spectrometers. The Ocean ST is ideal not only for everyday lab use but also for integration into devices or setups with limited space. It accommodates a wide range of applications, from measuring DNA absorbance to evaluating laser characteristics. If you would like to request a demo unit for evaluation, please feel free to contact us through the inquiry form!

• Spectroscopic Analysis Equipment

The sensitivity has increased by 2.5 times compared to the previous model!

NIRQuest+ is the next-generation near-infrared spectrometer model from Ocean Insight. The NIRQuest+ series has improved the design of the optical bench, achieving approximately 2.5 times higher sensitivity compared to the previous model. It is suitable for applications such as moisture content in fruit sorting, plastic recycling, and chemical concentration measurement, and can be used not only in laboratories but also for samples flowing on a conveyor line, for example. Demo units are available for loan sequentially. We encourage you to take this opportunity to evaluate it. For more details, please refer to the catalog or contact us.

• Spectroscopic Analysis Equipment

Benchtop UV-compatible luminous flux measurement device

BaseSpion is a tabletop light distribution measurement device that is the perfect tool for any lab. All drivers, including power analyzers and goniometers, are built-in and extremely compact. Additionally, with an option, you can upgrade the BaseSpion to "BaseSpion UV-VIS," allowing you to measure part of the UV-C range, which has seen increasing demand in recent years. BaseSpion UV-VIS can measure 3D light distribution and color for both visible and UV light simultaneously. By understanding the light distribution characteristics of UV radiation, users can enhance the efficiency of UV disinfection and curing. For more details, please download the catalog or feel free to contact our representative.

• Optical Measuring Instruments

A UV-compatible luminous flux measurement system that covers small lamps to large lamps.

VisoSystems' LabSpion is a photometric measurement system that covers a wide range of light sources, from small lamps and LED chips to large panels and streetlights. To meet the increasing demand for the UV-C range, it is capable of measuring from 200nm and above. With a 2-axis goniometer, it can measure the photometric distribution of a wide variety of light sources. It provides LDT and IES files for lighting design. Thanks to its unique technology, it enables light flux measurement using a spectral sensor and an integrated power analyzer, allowing for rapid measurement of all data. Additionally, LabSpion can be upgraded to "LabSensor UV-VIS" as an option. LabSensor UV-VIS can measure 3D photometric and color measurements of visible and UV light simultaneously. Users can enhance the efficiency of UV disinfection and curing by understanding the photometric characteristics of UV radiation. For more details, please download the catalog or contact us.

• Optical Measuring Instruments

Nanocrystals that absorb a wide range of light and emit light at specific wavelengths.

Quantum dots (nanocrystals) are nanoscale materials that can absorb a wide range of light and emit light at specific wavelengths, making them highly regarded for applications such as solar power systems, displays, LEDs, lasers, medical labeling, and diagnostic methods.

• Fine Ceramics
• Organic Natural Materials
• others

For basic research and development prototypes! Mixing quantum dots and resin for coating applications.

Quantum dot coating agents are the latest products that mix acrylic UV-curable resins/silicone resins with quantum dots used in LEDs, lighting, displays, biomedical applications, and solar power generation. By applying special treatment before mixing with UV-curable resins, it becomes easier to conduct fundamental research and development prototypes that were previously difficult. The resin used has low viscosity and can cure with ultraviolet light, making it primarily suitable for coating applications. [Key Points for Selection] ● This product allows for the easy formation of a quantum dot coating layer. ● Ideal for fundamental research, development, and prototyping applications. ● Excellent stability against temperature and UV.

• others

Easy measurement of the total radiant flux of UV light sources.

This product is a system that combines the spectrometer from Ocean Insight and the integrating sphere from Labsphere, capable of evaluating optical characteristics in the range of 210-1050nm. By using Spectralon, which exhibits high reflectivity even in the ultraviolet region, we can quickly measure the total radiant flux (W) of ultraviolet light, which has seen increased demand in the sterilization field, as well as the total luminous flux (Lumens), peak wavelength, and FWHM of visible light. The system is pre-calibrated for sensitivity, allowing you to measure the characteristics of sample light immediately without the hassle of calibration procedures. We will propose a system tailored to your needs. A demo unit has been prepared for you to evaluate in practice. Please contact us for more details.

• Analytical Equipment and Devices
• Spectroscopic Analysis Equipment

[Instructor] Paulstar Communications Inc. Representative Director Koji Kita [Key Lecture Content] Have you ever felt that, despite entrusting work to Generation Z and young employees, they "don't seem to get started," "don't lead to the expected results," or "it's ultimately faster to do it myself"? Behind these situations are various factors, including the recognition gap between supervisors and young employees regarding "entrusting and being entrusted," how to communicate the purpose of the work, the approach, and the scope of discretion, as well as how to follow up after delegating tasks. In this seminar, we will practically explain "how to delegate work" to elicit proactive behavior, taking into account the perspectives and behavioral characteristics of Generation Z and young employees. We will share specific management techniques to help supervisors break free from the burden of work, encourage the autonomy and growth of young employees, and steadily lead to results.

[Speaker] Yoichiro Okuyama, Senior Researcher, Research Department, Hamagin Research Institute, Inc. [Key Lecture Content] In China, the operation of autonomous taxis began in 2021, and now fully unmanned robo-taxis are running in cities like Beijing and Shenzhen. Experiencing a ride reveals the evolution of technology through natural acceleration, smooth steering, and seamless deceleration. Currently, there are several thousand vehicles in operation, but projections suggest that by 2030, this number could exceed one million, accounting for 70% of the global total. What are the underlying factors driving the social implementation of robo-taxis in China? By incorporating local test ride experiences, we will analyze the revenue situation of robo-taxi operating companies and the outlook for market expansion based on data, exploring their future potential. [Lecture Items] 1. Personal experiences of test riding robo-taxis in China 2. Trends in the market size of robo-taxis in China and globally 3. Background of the advancing social implementation of robo-taxis in China 4. Public acceptance and actual usage 5. Performance and challenges of major robo-taxi companies 6. Will robo-taxis become widespread in Japan as well? 7. Q&A / Business card exchange

Daitō Shikō Co., Ltd. will exhibit at the "102nd Tokyo International Gift Show Autumn 2026," which will be held at Tokyo Big Sight from September 2 (Wednesday). At the exhibition venue, we plan to showcase new products including the A7 binder, popular foil-stamped goods, stationery, clear files, and more. If you are looking for SP tools, promotional items, or novelties, please be sure to visit our booth.

Our company will participate in the 1st High-Performance Materials Exhibition (within High-Performance Materials Week) as a member of the MGC Group. We will be showcasing various functional polycarbonate resins that can serve as alternatives to metals and ceramics, so please be sure to visit our booth.

In the health and medical fields, which are directly connected to people's lives, it is essential to carefully interpret the results of data analysis and utilize them in decision-making. This seminar will first introduce basic analytical methods using JMP 19 and explain the contexts in which each method can be applied. Next, we will discuss the thought process for making causal interpretations, such as "Did a certain treatment improve the condition?" and how to estimate causal effects using JMP Pro 19. - Comparison of results before and after treatment using paired t-tests - Group comparisons using t-tests - Group comparisons considering pre-treatment values through analysis of covariance - Distinguishing between correlation and causation - Estimation of causal treatment effects This seminar will introduce these basic analytical methods with demonstrations. Those without statistical expertise and those unfamiliar with JMP are also very welcome. ▼ Details & Registration https://www.jmp.com/ja/events/live-webinars/non-series/2026/09-11-health-medical-data