[New Video Release] Behind the Scenes of the In-House Processing Competition

Achieve high-precision machining with high accuracy, high rigidity, and vibration-damping mechanisms! Capable of machining not only aluminum and stainless steel but also difficult-to-cut materials.

At You Corporation, we use the 5-axis machining center HERMLE, made in Germany, to process difficult-to-cut materials. HERMLE is a 5-axis machining center that can handle single-piece production and is capable of high-speed machining, leveraging its high rigidity. Additionally, the frame is made of artificial stone and features a seamless monocoque structure, which achieves: 1. High rigidity, 2. Minimal temperature variation, and 3. Reduced vibration resonance, enabling high-precision machining. You can also trust us with the processing of difficult-to-cut materials such as titanium, Inconel, Kovar, and Super Invar, in addition to aluminum and stainless steel! 〇 Features of the 5-axis machining center HERMLE ■ Capable of handling single-piece production ⇒ High-speed machining is possible by utilizing its high rigidity ■ High rigidity secured by the artificial stone monocoque frame ⇒ Enables high-precision machining *For more details, please refer to the PDF document or feel free to contact us. When inquiring, please reach out through the related link (inquiry form) below.

• Processing Contract

Aluminum, stainless steel, titanium, ABS, PC, POM, PEEK, PP, PPS processing. Capable of handling a wide range of materials! 3D shapes with 5-axis machining too!

【Video Now Available!】 We are producing pencils using our 5-axis machining center worth approximately 50 million yen! We will introduce the entire process in this two-part series! At U Corporation, we own about 100 machining centers, including both 5-axis and 3-axis machines! We handle both resin and metal at our own factory! ■ Resins: ABS, PC, POM, PEEK, PP, PPS, etc. * We also accommodate glass-filled resins! ■ Metals: Aluminum, stainless steel, titanium, super Invar, tantalum, molybdenum, pure copper, pure iron, brass, iron, etc. * We have an environment capable of handling various difficult-to-machine materials! Glass-filled resins like PC, PBT, and PPS tend to warp during machining. Therefore, we fully utilize our high-spec machining equipment and processing environment to tackle challenging precision requirements. * For more details, please refer to the PDF document or feel free to contact us. When inquiring, please reach out through the related link below (contact form).

• Resin processing machine

Precision machining of aluminum A5052, A5056, A4032, A6063, A2017, and A7075. Additional processing of cast and forged products is also available.

We are capable of manufacturing scroll components through cutting processes. We also handle micron-order manufacturing and inspection! Involute measurements are conducted in-house as well! At U Corporation, we not only perform cutting processes for various aluminum types such as A5052, A5056, A4032, A6061, A6063, A2017, and A7075, but we also have extensive experience in machining and lathe processing of copper, stainless steel, and difficult-to-machine metals like titanium, Inconel, Kovar, and Super Invar using highly precise machines and skilled techniques. Additionally, we are equipped with numerous 5-axis machining centers and multi-tasking lathes, allowing us to handle multi-faceted shapes, complex geometries, and curved shapes with high precision and speed! We can also process various resins such as ABS and POM entirely in our own factory. With approximately 100 machining machines at our disposal, we can flexibly accommodate urgent and short delivery projects. We are also capable of processing super engineering plastics like PPS, PEEK, and PTFE. We achieve high-precision processing in a controlled and well-maintained environment. *For more details, please refer to the PDF document or feel free to contact us. When inquiring, please reach out through the related link (contact form) below.

• Processing Contract

Processing achievements: Thinnest shape below 0.01mm! Cutting processing of thin plates and thin-walled shapes!! Achieving shapes through cutting processing of aluminum, stainless steel, brass, titanium, and more!

At U Corporation, we achieve micron-order ultra-precision machining using our long-cultivated know-how and high-precision equipment environment for both resin and metal materials! △ Thin Plate Processing Regardless of the material, such as stainless steel, brass, PET, or PC sheets, we can handle thin plate shapes extracted from thick materials into two-dimensional shapes! △ Thin-Walled Processing As the wall thickness decreases, cutting tools tend to escape, making it difficult to achieve a clean finish. However, we can overcome such challenging shapes by leveraging our long-cultivated technology and high-quality equipment environment! ★ Overview ■ Thin Plate and Thin-Walled Processing * Various aluminum, stainless steel, brass, and various resins ■ Record for thinnest shape: below 0.01mm ■ Difficult-to-cut materials * Machining of titanium, Inconel, Kovar, Super Invar, and others is also possible ■ Supported materials: ABS, PC, PMMA acrylic, POM, PPS, PEEK, aluminum, stainless steel, titanium, brass, Super Invar, Inconel, and more For more details, please refer to the PDF document or feel free to contact us. When inquiring, please reach out through the related link (inquiry form) below.

• Resin processing machine

What can high-precision hole machining actually do? We have summarized what we can handle based on our track record, including material, hole diameter size, depth, and precision!

At U Corporation, we achieve micron-order ultra-precision machining using our long-cultivated know-how and high-precision equipment environment for both resin and metal materials! Our company handles everything from research and development prototypes to small-lot manufacturing across a wide range of fields, including medical devices, aerospace, optics, electronics, and office automation. We produce high-precision, high-quality items daily, such as oxygen-free copper "acceleration tubes" and "thruster injectors" used in satellites. We have prepared materials that explain our high-precision hole machining in just three minutes! *For more details, please refer to the PDF document or feel free to contact us. ★Industries and Fields We Serve 〇 Aerospace 〇 Semiconductor and Electronic Equipment 〇 Medical Devices 〇 Cameras and Office Automation Equipment 〇 Automotive, etc. *We also accept commissioned measurements using CT scan measurement and other methods in-house. *For more details, please refer to the PDF document or feel free to contact us. When inquiring, please reach out via the related link (contact form) below.

• Processing Contract

In civil engineering sites, there are many instances where temporary roads, access routes, heavy machinery work yards, and material storage areas utilize ground boards. In addition to conventional steel plates, a material that is gaining attention for its creativity at each site is the "Hyper CLT Ground Board," which utilizes wood CLT. The Hyper CLT Ground Board is a civil engineering CLT material that leverages the properties of wood and can be used for mud prevention, ground protection, and ensuring pedestrian pathways. The 5×10 board weighs about 230 kg, while the 5×20 board weighs about 460 kg, making them lightweight and easy to handle even with small machinery, which helps reduce the burden of installation and removal. Additionally, it features characteristics unique to wood, such as glare reduction, noise reduction, and environmental consideration, making it a material that is easy to propose for creative suggestions in public works. It is suitable for sites that want to differentiate themselves from conventional materials and for projects that want to emphasize environmental and safety aspects. Recommended for companies aiming to improve site evaluations in civil engineering, it is registered as a Ministry of Land, Infrastructure, Transport and Tourism NETIS technology "TH-250021-A." Please consider revising your temporary plans or proposing ground boards that utilize wood. We can also guide you on selecting specifications and usage methods according to site conditions. We accept requests for materials and consultations for implementation. Proposals can be made for both public and private works. Please consult with us first.

The sheets used at civil engineering sites are important temporary materials that not only stabilize footing but also relate to the impression of the site and the ability to make proposals. While traditional steel sheets are common, their heavy weight makes transportation, installation, and removal cumbersome, making it difficult to differentiate between sites. The Hyper CLT sheet is a civil engineering CLT material that utilizes wood CLT. As a sheet with the texture of wood, it can be used in a wide range of civil engineering sites, including temporary roads, access routes, heavy machinery scaffolding, material storage areas, and pedestrian pathways. The 5×10 sheet weighs about 230 kg, and the 5×20 sheet weighs about 460 kg, making them lightweight and easy to handle even with small machinery, which helps reduce construction burdens and labor requirements. Additionally, due to the unique properties of wood, it can help suppress glare, reduce noise, and promote environmental considerations, making it easy to use for creative proposals and improving site evaluations in public works. It features a different appearance and functionality compared to iron sheets, contributing to site creation that takes into account landscape and working environments. Recommended for companies considering alternatives to steel sheets, it is registered as a Ministry of Land, Infrastructure, Transport and Tourism NETIS technology "TH-250021-A." We also accept consultations for implementation tailored to site conditions and requests for materials. Please make use of it for differentiation in public works and private civil engineering projects. We can accommodate sites both within and outside Okayama Prefecture. Please feel free to consult with us.

Under the floor and in the attic... "Invisible spaces" are being reconsidered now The environment surrounding the housing industry has changed significantly in recent years. Rising lumber prices, increases in equipment costs, a shortage of skilled workers, and prolonged delivery times are all contributing factors. These changes are not temporary; they are becoming established as structural changes within the entire housing industry. Furthermore, in recent years, the global surge in resource prices, the depreciation of the yen, and rising logistics costs have compounded the situation, leading to an overall instability in housing-related materials. The environment where it was once taken for granted that "necessary materials would be readily available when needed" is no longer a certainty. Additionally, the construction and equipment industries continue to face a serious labor shortage. In particular, the aging of veteran craftsmen who support the field is progressing year by year, while securing young talent is not easy. As a result, situations such as difficulty in scheduling construction dates, longer waiting periods before construction, and limited availability of contractors in certain regions are increasingly common nationwide. In the housing industry, there is now a growing sentiment that "construction plans cannot be made with the same sense as before," whether for new builds or renovations. For more details, please be sure to read the 【related materials】【related links】 below. ↓ ↓ ↓

We have updated the Wintechno Monitor Arm Comprehensive Catalog. This is the update for 2026-2027.

Wakakusa Co., Ltd. exhibited at the "2026 New Environmental Exhibition" held at Tokyo Big Sight. At our booth, we showcased our logistics recycling pallet "Eco Eco Pallet," made from recycled materials such as container and packaging plastics discharged from households, as well as various initiatives utilizing recycled resources, including marine plastics and used diapers. During the exhibition, we received numerous inquiries from many companies and organizations regarding the recycling of waste plastics and the use of PIR materials for automotive parts and PCR materials for used electronic appliance parts. We sincerely thank everyone who visited our booth. Wakakusa Co., Ltd. has been engaged in material recycling, transforming plastics that were previously discarded into new products, leveraging over 60 years of expertise in injection molding technology. We will continue to collaborate with our customers and partner companies to contribute to the realization of a society where plastic resources are recycled.