Introducing one-point advice for sample preparation.

Specialized polishing machine for final finishing. Compatible with large samples using a 12-inch polishing bowl.

Vibromet 2 can remove slight tissue alterations that occur during sample preparation without using hazardous chemicals required for electrolytic polishing, exposing the material's original structure on the analysis surface. ■ No worry about distorting the sample surface. Finishes the surface suitable for AFM and EBSD analysis. ■ Does not use hazardous chemicals. ■ No adjustments needed during polishing.

• Testing Equipment and Devices

Achieves excellent pore impregnation in a user-friendly and compact form.

The SimpliBack process is optimized for room temperature curing embedding. ■ Programmable. You can set the vacuum level, time in a vacuum state, and the number of cycles in a vacuum state. ■ Intuitive interface ■ Large sample chamber increases processing capacity, allowing for the analysis of more samples than ever before. ■ Easy to clean

• Testing Equipment and Devices
• Other inspection equipment and devices

A simple operating system! Providing a precise sectioning tool that can cut various materials.

The "IsoMet Low Speed" is a precision cutting machine designed to cut various types of materials with minimal deformation (strain). It possesses excellent versatility with low cross-flow capability and the ability to accommodate a wide range of sample shapes and configurations. As a result, it provides a precise sectioning tool that can cut various materials, including brittle or ductile metals, composites, cement, laminates, plastics, electronic devices, and biomaterials. 【Features】 ■ Achieves reproducible high surface quality ■ Compatible with a wide variety of sample chucks to accommodate different sizes and shapes ■ Allows for quick and easy setup ■ Can cut at a consistently accurate position ■ Motor speed can be adjusted between 0 to 300 rpm ■ Compatible with various diamond (HC, LC) and CBN blades in sizes of 3in, 4in, and 5in *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices
• Analytical Equipment and Devices

Designed for high-volume embedding! Tested under harsh conditions, assuming the working environment of a busy lab.

The "Simplimet 4000" is a high-speed embedding machine with high reliability in continuous operation environments. Designed for use in a 24/7 operating environment with regular maintenance, it prevents unexpected downtime through a robust and experience-based preventive maintenance program. Additionally, this compact product, with a width of 311mm, allows for the installation of consumables and multiple embedding machines, accommodating future expansions. 【Features】 ■ Excellent durability and high reliability in continuous operation environments ■ Reduces unexpected failures ■ User-friendly operation. Necessary items are conveniently located on the front panel, eliminating complicated settings. ■ The status bar and countdown timer at the bottom allow for quick visual understanding of the embedding status. ■ Compact size suitable for narrow labs. ■ Smart Cool system saves time and water while ensuring safety. ■ Innovative mold design enables rapid temperature rise.

• Testing Equipment and Devices
• Analytical Equipment and Devices

By adjusting with a 3-axis blade movement and a vice that does not require tools, quick cutting setup is possible!

The "Isomet High Speed" is a tabletop precision cutting machine that can efficiently and accurately cut various materials. Thanks to its innovative machine and vice design, it allows for quick and easy setting of the cutting position using precision lasers. Additionally, it utilizes an automatic dressing system to extend blade life and optimize cutting quality. 【Features】 ■ High-performance machine focused on efficiency, consistency, and precision ■ Equipped with a powerful 2kW blade motor output ■ Minimizes distortion of the sample surface caused by the blade ■ Reduces cutting time without affecting surface quality ■ Simple user interface ■ Adjusts cutting speed in real-time while maintaining powerful cutting efficiency *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices
• Analytical Equipment and Devices

Simplifying the grinding process! We provide robustness and stability with a durable die-cast body.

The "Ecomet 30" is a grinding machine designed for busy laboratory environments. It features a comfortable splash guard design that allows for easy control of the device while holding samples. The automatic machine simplifies operation by placing all commonly used functions on the front screen with an easy-to-use touchscreen interface, eliminating the need for complex menus. Additionally, it has a convenient cleaning function that makes maintenance easy. 【Features】 ■ Simplifies daily grinding tasks ■ Comfortable splash guard design ■ Easy control of the device while holding samples ■ User-friendly touchscreen interface for the automatic machine ■ Easy maintenance with a convenient cleaning function ■ Durable die-cast body provides robustness and stability *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices
• Analytical Equipment and Devices

For demanding environments! 10-inch (254mm) / 12-inch (305mm) medium-sized manual abrasive cutting machine.

The "Abrashimet M" is a medium-sized manual abrasive cutting machine that achieves consistent and reproducible cutting quality for medium-sized samples. With excellent operability and durability, and a spacious chamber, this device is ideal for quick and easy cutting in demanding environments. Additionally, it introduces a new abrasive cutting feature that allows for parallel dual-blade cutting, enabling two parallel cuts in a single cycle. 【Features】 ■ Cuts large and high-strength materials with a 5.5hp (4kW) motor ■ Accommodates samples up to 25 inches (635mm) wide in a spacious and large chamber ■ Easy daily maintenance with a large-capacity recirculation system ■ Efficient and powerful motor and high functionality enable reproducible cutting ■ Achieves consistent and reproducible cutting quality for medium-sized samples *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices
• Analytical Equipment and Devices

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

In future public works, not only construction quality but also safety measures, environmental considerations, labor-saving, and the use of new technologies will be important, along with the ingenuity applied on-site. In this context, the "Hyper CLT Board," a wooden lightweight mat using CLT, can be utilized. It can be used as a wooden mat for temporary roads, access routes, and heavy machinery work yards, and the 5×10 board weighs approximately 230 kg, making it relatively lightweight. In addition to ease of installation, removal, and relocation, it features the suppression of glare and metallic sounds unique to wood, as well as environmental considerations. Furthermore, it is a product that can easily incorporate proposals for the use of new technologies and creative ideas, as it is registered with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS as "TH-250021-A." However, simply being registered with NETIS does not automatically result in additional points. What is important is to clarify the purpose and effects of its use on-site. Wooden mats, NETIS, civil engineering, CLT. The Hyper CLT Board is a new option to connect on-site ingenuity to evaluation.

Our company has launched the new "Kappa twin" dual-wheel caster for ultra-heavy load transport. It achieves a high load capacity of up to 2,200 kg per wheel, making it an optimal solution for transporting heavy items in industries such as automotive, aerospace, special vehicles, and heavy industry. The dual-wheel structure distributes the load, balancing high load capacity with excellent mobility. By reducing starting and rolling resistance, it supports smooth transport even for trolleys in the several-ton class. Additionally, it excels in turning performance, contributing to improved maneuverability in limited spaces. It is also suitable for AGVs (automated guided vehicles) and heavy transport trolleys, providing the stability, durability, and safety required in high-load environments. It covers weight ranges that were difficult to address with conventional products, contributing to solving transport challenges in manufacturing settings. This new product is recommended for companies looking to transport ultra-heavy items "more lightly and more safely."

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs often change the base material around the crack due to heat, leading to residual stress and deformation, which constantly carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.