IFPEX2011 23rd International Fluid Power Exhibition

The accuracy is an impressive ±0.1% R.S. with a maximum flow rate of 7500 L/min! A high-precision flow meter that is also used as a secondary standard!

The "OMG Series" screw meter volumetric flow meter has a structure that allows fluids to flow linearly, resulting in significantly lower pressure loss compared to conventional gear-type meters, and it also reduces the load inside the flow meter. The measurement accuracy is very high at ±0.1 RS, making it suitable for use as a flow reference instrument. It can measure a wide range of fluids, including high-viscosity liquids such as adhesives, sealants, PVC, and polyols, as well as low-viscosity fuels like gasoline, diesel, and kerosene. Additionally, with a variety of pickup sensors, it can accommodate a temperature range of up to -40 to 200°C. 【Do you have any of these concerns?】 - The data during high-temperature tests is poor, making accurate measurement difficult. - It breaks down quickly within 3 to 5 years due to high temperatures, necessitating replacement. - I want to measure high-viscosity fluids such as grease, adhesives, and sealants.

• Hydraulic Equipment
• Other physicochemical equipment
• Flow Meter

The high-pressure screw meter OMH is a high-precision volumetric flow meter designed for high pressure, featuring a spiral gear type. It has low pressure loss and is suitable for high temperatures.

This is a high-pressure flow meter compatible with MAX 42 MPa. (*For 63 MPa compatibility, please contact us for details.) Connections include SAE, DIN, G (BSPP), and others. Compared to conventional gear meters, it has lower pressure loss, which can help reduce electricity costs for motors and other equipment. It is particularly used for performance testing of high-pressure hydraulic equipment and for cylinder position detection in tunnel boring machines. It can accommodate a wide range of liquids, from high-viscosity liquids such as adhesives, sealants, PVC, inks, and polyols to low-viscosity liquids like gasoline and diesel. There are two types of traceability options: (1) ISO/IEC 17025 calibration (equivalent to JCSS) (This does not include a system diagram or calibration certificate.) (2) Attach documents such as a report, calibration certificate, and system diagram. *For details, please contact us. Calibration is performed at approximately 5 mm²/s (equivalent to diesel oil).

• Hydraulic Equipment
• Flow Meter
• Flow Control

The screw meter OME is a helical gear type volumetric flow meter, lightweight and compact, with a wide measurement range and high precision.

OME is a helical gear type volumetric flow meter, a screw meter. It has an aluminum body, featuring a lightweight and compact design. The measurement accuracy is ±0.3% RS (1:150), providing high precision. The 1:10 range (from 1/10 of F.S.) has linearity of ±0.1%. It also supports calibration in accordance with ISO/IEC 17025 ILAC MRA (JCSS mutual recognition).

• Mixer/agitator

The OMG high and low temperature flow meter is a high-precision volumetric high-pressure flow meter. It has high measurement accuracy and can also be used as a standard device for flow calibrators.

The KRAL OMG series features a screw-type (helical gear) structure that allows fluid to flow linearly, resulting in significantly lower pressure loss compared to conventional gear meters (circular gear type), and enables high-precision measurement of ±0.1% R.S. The flow meter is calibrated at 5 mm²/s, allowing for high-precision measurement even at high temperatures (low viscosity) compared to circular gear meters. Therefore, it is hardly affected by temperature changes (changes in liquid viscosity). It can be used for a wide range of fluids, including fuels such as gasoline, diesel, kerosene, and heating oil, as well as hydraulic oils, lubricating oils, ATF, polyurethane raw materials like polyols and isocyanates, inks, adhesives, sealants, PVC, greases, and most liquids other than water. High-precision measurement of ±0.1% R.S. is possible due to the precisely machined spindle. Direction detection (forward/reverse) is also available as an option. ◎ Specifications ◎ Operating pressure: MAX 25 MPa Applicable viscosity: 1 to 1,000,000 mPas Measurement accuracy: ± 0.1% R.S. Temperature range: -40 to +200°C (Varies depending on the type of pickup sensor)

• Hydraulic Equipment
• Other physicochemical equipment
• Flow Control

It is a digital flow display with a high-speed response of 1 msec or less.

The FM series digital flow meter is a pulse input type flow meter. The analog output update time is a high-speed D/A conversion of 1 msec or more.

• Piping Materials
• Flow Control
• Display

It is possible to reduce the pressure up to 68.9 MPa to a range of six adjustable pressure levels below a maximum of 41.3 MPa.

The 44-1100 series is a high-pressure pressure reducing valve capable of reducing pressure up to 68.9 MPa to a maximum of six adjustable pressure ranges below 41.3 MPa. The adjustment range can be easily changed by replacing internal components within a single unit. This regulator comes standard with a built-in vent valve, allowing for the release of pressure from a closed piping system through the pressure reducing valve. There is also a non-vent option available for flammable gases and liquids. *For more details, please download the catalog or contact us directly.*

• Pressure Control

High precision of ±0.1% RS! A volumetric flow meter of spiral gear type with intrinsic safety explosion-proof specifications.

The screw meter OME, using spiral gears, is a high-precision flow meter with an accuracy of ±0.1% RS. Since it is a volumetric type, it is less affected by changes in fluid viscosity due to temperature variations. However, an optional temperature sensor can be attached to the OME, allowing for temperature compensation to further improve accuracy. Additionally, being a volumetric type, it does not require straight pipe sections at the inlet/outlet of the flow meter. By using an aluminum body, it achieves a compact and lightweight design, making it suitable for installation in limited spaces such as engine compartments. 【Features】 ■ Explosion-proof design with intrinsic safety using Namur sensors ■ Flow range: 0.1 to 525 l/min (4 models) ■ Operating temperature: 0 to 80℃ ■ Operating pressure: Max 4MPa ■ Measurement accuracy: ±0.1% R.S. (1:10 range) ■ 90° phase difference pulse output for two-phase (optional) *For more details, please refer to the PDF document or feel free to contact us.

• Instrumentation and Control Systems

The flow monitor is an oil/water flow meter that can be used at high pressure and high temperature. It is a visual type flow meter that does not require power, and the installation orientation can be vertical or horizontal.

Compatible with high pressure such as hydraulic/water pressure Also supports high-temperature specifications for various performance tests and durability tests The flow monitor is a flow meter for oil that is compatible with high pressure and high temperature. The flow monitor operates by the internal magnet being pushed up by the flow of fluid, and the pointer moves in conjunction with the magnet to indicate the flow rate. Since oil does not flow directly over the scale section, it is easy to read the scale. It can be installed in any orientation, either vertically or horizontally. The standard type can handle temperatures up to 116°C, but we also offer high-temperature "H" series and ultra-high-temperature "J" series. Additionally, we have a dedicated "P" series for aircraft hydraulic fluids. The scale for oil has been pre-calibrated based on a specific gravity of 0.873 and a viscosity of 40 mm²/s, so conversion from the water scale is unnecessary. Models that accommodate both forward and reverse flow are also available. (BI) *It can also be used for water. (Water scale compatible) Please contact us for inquiries regarding transmitters.

• Flow Meter

In public construction civil engineering sites, there are many instances where sheets are used as common temporary facilities, such as construction roads, access roads, heavy machinery work yards, material storage areas, and worker pathways. Traditionally, steel plates were common, but due to their weight, transportation and installation can be cumbersome. Hyper CLT sheets are civil engineering materials made from wooden CLT for civil engineering use. The 5×10 sheet weighs about 230 kg, and the 5×20 sheet weighs about 460 kg, making them lightweight and easy to transport, install, and remove, even with small machinery. They can be widely utilized for temporary roads, heavy machinery scaffolding, pathways within the site, and protection of material storage in public works. Since they are made of wood, they also contribute to environmental aspects such as reducing summer heat reflection, lowering noise, and fixing CO2. They can simultaneously address construction efficiency, safety measures, and environmental considerations, making them effective for innovative proposals in public works. Furthermore, they improve transportation efficiency and reduce labor in site operations as an alternative to steel plates. Hyper CLT sheets are registered technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS "TH-250021-A." They are recommended for companies considering civil engineering, civil engineering use, and civil engineering CLT. Feel free to request materials or consult about implementation. They are temporary materials that also help improve site evaluations in public works. Please consider them.

We have released a new video on our company’s YouTube channel. The theme of this video is "The World of Amino Acid-Based Shampoos." Amino acid-based shampoos have become popular in recent years, but the lather, feel, and finish can vary greatly depending on the cleansing ingredients used. In this video, we clearly explain the changes in user experience based on the differences in cleansing ingredients by comparing two types of amino acid-based shampoos. We hope you can use this as a hint for developing original shampoos and differentiation.

New York and Tokyo, June 26, 2026 - (JCN Newswire) - This year's successful listing of PayPay Corporation (hereinafter "PayPay") on NASDAQ has provided a significant boost. The question now facing Japan's leading innovation companies is no longer "Is a U.S. listing feasible?" but rather "How can we attract global capital and build companies that align with global growth strategies?" The 2nd Japan Go IPO Summit will be held on September 16, 2026, at the Grand Hyatt Tokyo to address this question. This summit is hosted by MarcumAsia and organized by AUM Advisors. To register for this invitation-only event, please apply here: Japan GO IPO Summit Attendee Information https://events.marcumasia.com/view.php?id=32

Our company representative, Shibata, will be speaking as a lecturer at the "Mikata Project" AI Utilization Seminar for the automotive industry, hosted by the Chubu Bureau of Economy, Trade and Industry. ■ Title: AI Implementation Course Leading to Results - Learning Success Patterns and Practical Processes from Real Examples in Manufacturing Sites "We implemented AI, but it is not being used on-site and is left unattended" and "The implementation has become the goal without yielding results" - we have seen many such stumbling blocks in manufacturing sites. In the seminar, based on real examples, we will discuss common patterns for successful implementation that lead to results, pitfalls to avoid, and practical processes to ensure AI is continuously used. We will also propose specific measures for sites struggling with technology transfer and dependency on individuals. ■ Event Overview Date: July 3, 2026 (Friday) 13:30 - 16:00 Venue: TKP Meitetsu Nagoya Station Conference Center + Online Participation Fee: Free / Application Deadline: June 30 (Tuesday) Organizer: Chubu Bureau of Economy, Trade and Industry (Automotive Industry "Mikata Project") Co-presenter: Satoru Hayami, Waseda University For details and registration, please visit the official page of the Chubu Bureau of Economy, Trade and Industry. If you are struggling with AI implementation in manufacturing sites, please feel free to consult us, regardless of region or industry.

July 16 (Thursday) 10:00 AM - 6:00 PM Venue: Convex Okayama Small Exhibition Hall