[Industrial Waste_Problem Solving Case] Solutions for crushing of fluff, crushing of home appliance plastics, and pre-treatment before incineration.

Active in large-scale fluff processing.

**Case Study on Problem Solving** ■ Effects of Implementation We have successfully crushed waste plastics to under φ20mm, allowing for stable shipments for cement fuel and paper mill fuel. It has demonstrated significant effects with performance as expected. The machine is quieter than anticipated. ■ Deciding Factors for Purchase With the proposal to utilize subsidies, we were able to proceed with the purchase of a larger model by keeping the budget lower than usual. By embedding the frame in the pit and arranging a steep conveyor, we were able to make effective use of space. ■ Model Introduced - UC-250 (250kw) - Screen Size: φ20mm - Application: Refuse-derived fuel (cement, paper mills) *For more details, please refer to the PDF document or feel free to contact us.*

• Crusher

Contributing to the stable operation of the incinerator.

**Case Study on Problem Solving** ■Effects of Implementation By adjusting the particle size of the input material, we have been able to operate the incinerator stably. We are satisfied with the stable supply to the downstream equipment of the crusher. ■Deciding Factors for Purchase - The frame design considers ease of maintenance and wear resistance. - The flexibility in meeting the special requirement for outdoor specifications. - We were attracted by the ability to respond flexibly to other needs. ■Model Introduced - UC-132 (132kw) - Screen size: φ50mm - Application: Crushing for volume reduction and particle size adjustment before incineration of industrial waste. *For more details, please refer to the PDF document or feel free to contact us.*

• Crusher

We would like to introduce a case where the UC series single-shaft crusher was introduced as a dedicated aluminum crushing machine.

【Case Study of Problem Solving】 ■Effects of Implementation When crushing aluminum of various shapes, the shredder produces shreds of the expected size, allowing for the discharge of materials suitable for downstream processes. ■Deciding Factors for Purchase The noise level during shredding was lower compared to other companies, and the processing capacity exceeded expectations. The ability to address both pre- and post-crusher equipment as a package was a key factor in the purchase decision. ■Model Introduced ・UC-200 (200kw) ・Screen Size: φ60 ・Features: Dedicated aluminum crushing machine *For more details, please refer to the PDF document or feel free to contact us.

• Crusher

Recycling/energy recovery of 30 tons/month of waste generated within the company with added value.

**Case Study on Problem Solving** ■Effects of Implementation By crushing approximately 30 tons/month of waste generated in-house, such as poly drums, we were able to add value and recycle or convert it into fuel. ■Factors in Purchase Decision - It can effortlessly crush difficult-to-process materials like FIBC bags. The precision is excellent, and the cutting performance is outstanding. - Compared to other companies, the lower running costs were a decisive factor in the purchase. ■Model Introduced - UC-75 (75kw) - Screen size: φ30mm - Various conveyor systems for downstream equipment *For more details, please refer to the PDF document or feel free to contact us.*

• Crusher

Active in the stable crushing of mixed plastic home appliances.

**Case Study on Problem Solving** ■ Effects of Implementation When crushing mixed plastic from home appliances, it can be coarsely crushed to the expected size, allowing for stable flow to downstream processes. ■ Deciding Factors for Purchase - Due to its low-speed rotation, the noise during crushing is very low, and the processing capacity met the expected test evaluations. - Compared to other companies, the initial and running costs were lower, which was a decisive factor for the purchase. ■ Model Introduced - UC-45 (45kw) - Screen Size: φ40mm - Application: Primary crushing of mixed plastic from home appliances *For more details, please refer to the PDF materials or feel free to contact us.*

• Crusher

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.

[To the owners of parking lots and parking lot construction companies] "I'm worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those facing sidewalks or roadways are particularly prone to dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surroundings with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Vehicle Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

This is an air leak tester for battery cases of electric vehicles (EVs). The battery case has the characteristic of being "large with a significant internal volume, and its structure may deform due to internal pressure." As a result, air leak testing generates "noise caused by its large size and capacity" and "noise caused by expansion or deformation due to internal pressurization." To mitigate this noise, this device features a newly developed smoothing function and a linear fitting correction function used in combination during measurement. Additionally, to achieve low-pressure control that is difficult to manage and to expand flow for large volumes, we provide a bypass box (CBU-600) equipped with an electro-pneumatic regulator for precise pressure control and a pressurization valve with a large effective diameter to supply high flow rates. Measurement methods: Work-Work comparison, Work-Master comparison, Fixed Master comparison Measurement pressure range: 10 kPa, 20 kPa, 50 kPa (depending on specifications) Gauge pressure sensor accuracy: ±2% F.S. Differential pressure sensor accuracy: ±0.5% F.S. Group settings: 0 to 31 groups Power supply voltage / Power consumption: AC100 to 240 V / 100 VA

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed without causing any thermal impact on the base material. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!