During the High-Performance Materials Week, Otsuka Chemical and Higashiyama Film will jointly exhibit at Plastic Japan and Film Tech Japan.

This is an introduction to functional polymers using controlled radical polymerization. [We will be exhibiting at Plastic Japan and Film Tech Japan in October.]

"TERPLUS" is a functional polymer synthesized using our proprietary controlled radical polymerization method, "TERP method." By utilizing controlled radical polymerization, we provide polymer products with uniform molecular weights and controlled polymer structures, such as block polymers. The main product groups of "TERPLUS" include the following: 1) Pigment dispersants: Advanced dispersion stability due to block polymer structure 2) Adhesives: Manifestation of anti-contamination properties and mechanical characteristics through molecular weight distribution control in the high molecular weight range Our dedicated plant at the Tokushima factory can accommodate production from prototype to mass production levels. *For more details, please refer to the PDF materials or feel free to contact us.

• Other polymer materials

Next-generation ultra-fine fibers that are expanding! They have been used for many years and their range of applications continues to grow.

"Tisumo" was born in 1979 and has been used for many years. It is an extremely fine crystalline fiber, with a size that is thousands of times smaller than that of conventional glass fibers. Its range of applications continues to expand, primarily in the automotive, office automation equipment, and electronics sectors, with uses spreading worldwide. 【Features】 ■ Size is thousands of times smaller than conventional glass fibers ■ High-strength, high-rigidity material with strength and rigidity equivalent to carbon fibers ■ Mohs hardness comparable to cast iron, exhibiting excellent friction and wear characteristics *For more details, please refer to the PDF document or feel free to contact us.

• Other polymer materials

Compared to organic foaming agents, there is less mold contamination and metal corrosion, and heat-absorbing decomposition allows for a reduction in the molding cycle!

The "Uniform AZ P Series" is an environmentally friendly foaming agent primarily composed of inorganic carbonates. We offer masterbatches tailored for various applications and purposes, including vehicle components, building materials, and furniture parts. Unlike organic foaming agents, inorganic foaming agents do not leave color residues or odors in the final product (foam), leading to improved quality and increased productivity due to thermal decomposition. 【Features】 ■ White in color, resulting in minimal coloring of molded products ■ Less mold contamination and metal corrosion compared to organic foaming agents ■ Thermal decomposition allows for shorter molding cycles ■ Masterbatches available for various applications and purposes, including vehicle components, building materials, and furniture parts *For more details, please refer to the PDF document or feel free to contact us.

• Other polymer materials

Excellent wear resistance and recyclability! Reinforcement at the micro level is possible for thin and narrow sections. 【Exhibiting at Plastic Japan and Film Tech Japan in October】

We would like to introduce our resin composite material "Pochicon/Wistat." By incorporating potassium titanate fibers "Tismo" and "Dentor" as reinforcing materials, it is possible to provide micro-level reinforcement in thin and narrow sections of molded products. Additionally, molded products made with this material have high mold transferability, resulting in a smooth mirror-like surface. The improvement in dimensional accuracy makes it suitable for precision parts, sliding parts, plated parts, and aesthetic parts. 【Features】 ■ Micro reinforcement capability ■ Excellent friction and wear resistance ■ Excellent recyclability ■ Excellent dimensional accuracy and stability ■ Extreme surface smoothness *For more details, please refer to the PDF document or feel free to contact us.

• Other polymer materials

This is a composite material containing ultra-fine potassium titanate fibers called "Tismo."

The high-performance thermoplastic composite material "Pochicon" is a composite material that incorporates ultra-fine potassium titanate fibers called "Tisumo." It is a thermoplastic material that meets customer needs for applications requiring micro-reinforcement, such as LED reflector parts and camera module components, as well as for high-strength and high-sliding applications like automotive bearing parts. 【Features】 ■ Micro-reinforcement ■ Excellent friction and wear properties ■ Excellent dimensional accuracy and surface smoothness ■ Excellent recyclability *For more details, please refer to the PDF document or feel free to contact us.

• plastic
• Other polymer materials

Challenging new possibilities for films with low linear expansion and high rigidity! It also has good adhesion properties for secondary processing and metals.

"Film-grade Pochicon" is a composite material for recyclable thermoplastic films, created by combining a special scaly "filler" with thermoplastic resin, offering low thermal expansion coefficient and high rigidity. Due to its low thermal expansion coefficient and good adhesion properties for secondary processing and metals, its applications extend to flexible substrates and multilayer boards. 【Features】 ■ High rigidity, bend resistance, and surface smoothness ■ Recyclability and low thermal expansion coefficient ■ Thermoplastic: easy secondary processing ■ Solder heat resistance 260°C for 60 seconds ■ Excellent dielectric properties ■ Low thermal fusion at 250°C *For more details, please refer to the PDF document or feel free to contact us.

• Composite Materials
• Other polymer materials

Extremely stable resistors can be obtained! Introduction of advanced conductive ceramic materials.

"Dentol WK" is a white conductive filler based on a thismol derivative, with a nano-order conductive layer applied to its surface. By incorporating it into paints, adhesives, resins, etc., conductivity can be imparted. Our company offers a range of white conductive materials (the "Dentol" series) that can be widely applied in fields such as paints, plastics, and inks. 【Features】 ■ Extremely stable resistors can be obtained ■ Imparts conductivity to paints, adhesives, films, and molded products ■ Resistance values can be set by adjusting the amount added ■ Excellent environmental stability ■ Resistance values are stable against temperature and humidity, and have excellent chemical resistance *For more details, please refer to the PDF materials or feel free to contact us.

• Other polymer materials

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

We will be exhibiting at "CEATEC 2026," which will be held at Makuhari Messe from October 13 to 16. We provide information technology and process informatics (PI) that optimize "how to create" by utilizing physical simulations, AI, and machine learning in process development. We look forward to your visit to our booth. 【Seminar Information】 "Process Informatics for Exploring Optimal Manufacturing Conditions" Date and Time: October 16, 2026 (Friday) 12:45 - 13:00 Venue: Makuhari Messe Exhibition Hall 4 P Stage Speaker: CEO Takaishi Please check the link below for details on our exhibition.